Error in Message-Mapping transformation

I'm getting an error while processing the data from JDBC to SAP through IDOC's.
During the application mapping com/sap/xi/tf/_MM_HRMD_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~
while testing the mapping in IR (message mapping) it got succesfull.
while testing the mapping in ID (Test configaration) with inbound payload we are getting the below error.
interface Mapping
... (173 lines)
Please provide the solution for this...

Hello,
Check out the trace thorougly in MONI as at which node/field the error is occuring.
W.r.t ID testing,kindly check your interface determination(sender,receiver parameters and also the inbound interface etc)
Regards
Madhu

Similar Messages

Run time error during message mapping transformation

Hello,
i created a scenario and tried to execute . i got this error .
RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ZCRM_CRMXIF_ORDER_SAVE_M01/IDOC/BEGIN. The message is: Exception:[java.lang.RuntimeException: Error: Occurred in RFC Look UpPlain exception:Problem when calling an adapter by using communication channel RFC_Lookup_Receiver (Party: , Service: Test_ReceiverSystem, Object ID: 1772b13e46b93b99bca48e278463007d) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:1772b13e46b93b99bca48e278463007d not available in CPA Cache. com.sap.aii.mapping.lookup.LookupException: Problem when calling an adapter by using communication channel RFC_Lookup_Receiver (Party: , Service: Test_ReceiverSystem, Object ID: 1772b13e46b93b99bca48e278463007d) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:1772b13e46b93b99bca48e278463007d not available in CPA Cache. at com.sap.aii.ibrun.server.lookup.AdapterProxyLocal.<init>(AdapterProxyLocal.java:61) at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.getProxy(SystemAccessorInternal.java:98) at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.<init>(SystemAccessorInternal.java:38) at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.getConnection(SystemAccessorHmiServer.java:270) at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.process(SystemAccessorHmiServer.java:70) at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169) at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:296) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211) at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) ] in class com.sap.xi.tf._XiameterBasicRegistration_MM_ method crmRfcLookUp$[, , , , Test_ReceiverSystem, , com.sap.aii.mappingtool.tf3.rt.Context@26dd0a50]
can any one tel me wats going wrong ??

The error shows that you are using business system and comm. channel in UDF for doing some processing. The error is because it is not able to locate the specified comm channel for the business sytem.
please check if the comm. channel name and business system names are spelled correctly. Also you can try refreshing the CPA cache/ XI cache.

Message Mapping error: RuntimeException in Message-Mapping transformation

Hi,
Being new to XI, I am struglling to sort out a basic mapping error. Appreciate if you could help out.
Its an File->XI->R/3 scenario.
My FCC successfully reads the File and creates an XML. However this XML is not transferred to the target XML structure which is exactly same except the root element name is different at top.
I tried various forum tips but I still am getting the error.
( When I Test the Message mapping in test mode..it seems fine, however if I copy the XML from SXMB_MONI, it then throws the above error)
I looked at the MM in text mode: below is the extract
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER=
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER/SOURCE=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER/SOURCE=
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER/DESTINATION=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER/DESTINATION=
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER/MESSAGE_ID=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER/MESSAGE_ID=
As seen the name space in both starts with nS0 and end of each line has '=' sign. Is that ok.
I have run out of options and dont know , whats the problem. Please help.
The target and Source XML structures are exactly same as shown below
MT_REQUEST                                 MT_REQUEST_TO_SAP
   |__MSG_HEADER                            |__MSG_HEADER
     |__SOURCE                                |__SOURCE
     |__DESTINATION                           |__DESTINATION
     |__MESSAGE_ID                            |__MESSAGE_ID
And the SXMB_MONI Trace shows the following error
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation:
Cannot produce target element /ns0:MT_REQUEST_TO_SAP.
Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at ..
Thanks
Shirin
Edited by: Shirin K on May 29, 2008 10:29 AM

Hi Prakasu,
As structure are exactly same, I have done 1:1 mapping. So all the fields in target structure are mapped, so no field has beeen left.
In this structure, I do not have any 1:n relation. So 1:1 mapping should be fine.
Apart from this could teher be any other reason.
Regards
Rajiv

JDBC Sender Error "RuntimeException in Message-Mapping transformation"

Hi All,
I have JDBC as sender and i am able to poll the data from the database,which is available in SXMB_MONI but its giving an error "RuntimeException in Message-Mapping transformation".I have tested the mapping in TEST and its working fine but when i tested the same in configuration its throwing an error in Interface mapping(<NOT FOUND>).
I have also created a node <b>row</b> in my sender data type.
Expecting your help soon.
Thanks and regards,
Zabi.

Hi,
Check the data coming inside..the XI... that is before mapping..
Regards
Agasthuri Doss

Message Mapping Transformation error in E-filing GB

Hi All,
I am running the E-filing GB interface and at the Message mapping I get Process Error:
The source structure, target structure, or a function library has been changed or could not be found in the Enterprise Services Repository. The mapping definition contains elements or attributes that do not exist in the changed structure, or functions that were changed in a function library. The relevant entries will be deleted.
Node with path /ns0:GovTalkMessage/ns0:Body/ns1:IRenvelope/ns1:EndOfYearReturn/ns1:P14/ns1:NICs/ns1:Earn/ns1:ETtoUEL not found in source structure Node with path /ns0:GovTalkMessage/ns0:Body/ns1:IRenvelope/ns1:EndOfYearReturn/ns1:P14/ns1:NICs/ns1:Earn/ns1:ETtoUEL/@Currency not found in source structure
I have already tested a few steps like:
1. We have applied the latest patch to E-filing GB. This did not help solve the problem.
2. Tested the Message Mapping. No error at Message Mapping.
Is there anything we are missing out on?? Please suggest.
Thanks,
Shwetha

Hi,
for me its looks cache issue,did you changed structure of source and target ?? check your function liabraris code,it is valid or not.
Regards,
Raj

RuntimeException in Message-Mapping transformation: Runtime exception durin

Hi Friends,
Iam going test Message Mapping, i got the error like
RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:LeapIndent_R3_MT/Recordset/RowData/QTY_TNS. The message is: Exception:[java.lang.NumberFormatException: empty String] in class com.sap.aii.mappingtool.flib3.Arithm method formatNumber[, com.sap.aii.mappingtool.tf3.rt.Context@27f972cf]
Pls help me ..
Thanks & Regards,
Nvr

Hi Ravi,
Thanks for ur reply, the problem is solved, the Date field is Mandaratory, they are not mention the data field, so that way the problem is coming.
Thanks & Regards,
NVR

RuntimeException in Message-Mapping transformation: -- Message Status 14

Dear ALL Experts
Messages are failed and showing the "RuntimeException in Message-Mapping transformation: Cannot produce target element "
also Message Status are showing as 14. Need to know few details such as,
1> Where we can check the exact error ?
2> Where we can check the error log file ?
3> What will be the possiable reason behind this failer ?
4> how can we resolve the same ?
Thanks and Regards
Machindra Patade

Messages are failed and showing the "RuntimeException in Message-Mapping transformation:
Cannot produce target element "
The mapping logic applied is not able to produce the target element with the sorresponding Source payload.
Check if the payload (which you see in SXMB_MONI) is able to execute the mapping (Message/ Interface Mapping --> Test) successfully.
you can even refer page-191 from this guide:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000702797&_OBJECT=011000358700000063822008E
S-userid required to view the above document....the method is the same for SAP XI/ PI 7.0/ 7.1
Regards,
Abhishek.

Repeate Message after RuntimeException in Message-Mapping transformation

Hello Experts,
I have a mapping defined with a UDF. In the mapping editor the tests were successfull but in the reale world - of course not
Now I have a message in the Integration Server with red flag because of
com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /LIST/S_UNB/S_UNH/G_SSG18/S_GID/C_C213/D_7224. The message is: Exception:[java.lang.NumberFormatException: For input string: "__cC_"]
I've located the error in the UDF and want to repeate the message with the new mapping. But again the same error although the test in the mapping tool (with the original payload) was successfull.
It must be possible to repeate those messages but how?
Thanks a lot.
Christian

This was a little bit strange. But after the import, the version of the mapping in PROD was different from TEST.
I've changed the description Field of the Mapping in Test, activated the version and did the export/import again. Now the versions were the same and after repeating the message everything is o.k.
THANKS ALL FOR YOUR HELP!
Christian

UK E-Filing: Message Mapping Transformation

Hello Everyone,
Just curious to know if anyone has seen this error while working on E-Filing for the UK, while trying to send data to the Inland Revenue:
com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:GovTalkMessage/ns0:Body/ns1:IRenvelope. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start
Helpful, readable, and easy to understand reponses which provide a resolution to this issue, will be rewarded accordingly.
Thanks for your help!
John

Hi John,
1) Your problem is related to Message mapping only.
2) This type of error means in mapping you have context problem. Some where your context is mismatched for IRenvelope node.
3) Take your runtime xml and check directly in message mapping.
4) Your output instances for IRenvelope is more than its occurances.
5) Try by using RemoveContext function before your target node.
Regards Rohit,
Reward points if helpful

Error: "Operation (Message) Mapping ... does not exist" during activation

Hello Colleagues,
I face following problem at our PI 7.1 System.
After import and activating Integration Builder (Directory) Objects I received the Error "Operation (Message) Mapping ... does not exist" but the object (s) exist at Enterprise Service Builder (Integration Repository) at respective Software Component Version.
The individual Product and respective Software Component Version was created at SLD and imported at Enterprise Service Builder (Integration Repository). Afterwards Namespaces with different objects was created incl. the missing Operation Mapping.
As Check:
When I try to import under menu Tools\Apply Model from ES Repository at Integration Builder (Integration Directory) i see onyl SAP (SAP BASIS 7.1) Software Components.
I am not able to find any object regarding the individual created Product\Software Component.
So, i asume objects from the Enterprise Service Builder (Integration Repository) aren't available at Integration Builder (Integration Directory).
SLD cache refresh and application restart already performed.
Any idea?
Many thanks in advance!
Regards,
Jochen

Hi Laxmi,
attached short steps that we performed.
In general in upfront:
This behavior happend after import objects from DEV to TEST for Enterprise Services Builder (IR) and Ingegration Builder (ID) in addition manual object creation at SLD for Technical Systems and Business Systems.
We don't have (currently) a central SLD for each environments DEV, TEST, PROD (not finished setup up to now). For each environments we have a local SLD at PI (XI).
Deployment steps:
- Product and respective Software Component Version created under Software Catalog
- objects creation at SLD for Technical Systems
- objects creation at SLD for Business Systems
- objects imported from DEV to TEST for Enterprise Services Builder (IR) incl. save and activation
- objects imported from DEV to TEST for Integration Builder (ID)
- manual configuration for communication channels performed
- after save and activation i received following error message: "Object Operation Mapping: ... does not exist.
Because of this error message I thing objects out of the Enterprise Services Builder (IR) aren't available at Integration Builder (ID) but i don't know the cause.
Could you help me to understand this behavior?
Many thanks in advance!
Regards,
Jochen

System Error During Message Mapping

I've set up a simple mapping scenario that sends a DEBMAS06 IDoc from our R/3 system to XI mapping to DEBMAS06 and writing out to a file. I am getting the following system error during message mapping:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>Server repository could not create function template for 'SMPP_CALL_JAVA_RUNTIME</SAP:P1>
I have gone back to the Design Builder and tested out the message mapping and the interface mapping and both work successfully. I have also taken the payload of the message and submitted it via the RWB and it generates the same error as when sent from R/3. Any other places I can look?

Hi Mike,
You have got the connectivity issue problem between ABAP and J2EE stack. When do the test in the Message Mapping, thats the J2EE and it works. But during the runtime it has to go to the Integratin Server, which is the ABAP stack. Fix the connectivity issue, check the smicm,trace and debug log etc.
Hope this helps.
Cheers,
Ranjan

Message-Mapping transformation Error(Soap - XI - SAP)

Hi
We have a sceanio
Soap <-> XI <-> SAP
We could see the RFC return message from SAP but while trasforming that message to SOAP response ,we are getting the following error. We have manually run the response mapping program, it is executing fine.
<SAP:Stack>During the application mapping com/sap/xi/tf/_MM_GR_GetTODetails_Response_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
Could anybody please help us.
Thanks
Ramesh

Hi
Thank you so much for your promt responses. I could get great inputs from your responses.
It is the problem with the RFC return message structure. In one of the segment it was defined mandatory but the RFC is not populating that segment data.
Appreciate your help.
Warm Regards
Ramesh

Message mapping transformation error for RFC calls

Hi,
I am having a weird problem. recently client migrated the server and we started getting all possible errors in XI which we are able to fix. Now we have a strange problem in quality system alone where the bapi calls are made from QA11 and MIGO. The bapi call from MIGO is sucessfull but from QA11 it fails with below error
com.sap.aii.utilxi.misc.api.BaseRuntimeException
thrown during application mapping
com/sap/xi/tf/_MP_RFC_PROXY_GOODS_RECEIPT_:
RuntimeException in Message-Mapping transformatio~
I checked in development system and production where it is sucessfull but in quality its failing. I checked the cache and refreshed for confirmation and checked the trace and log files but couldt find any solution. The call made from a test report is also sucesfull but only bapi calls from QA11 are failing.
Note: i am using same bapi in MIGO and QA11 and the integration is same as well. There is no difference in data between 2 transaction just the trigerring point is differenct.
I tested my message mapping, interface mapping and configuration as well with sample payload and they are working fine.
I checked SDN and saw that similar issue is faced by others but no solution is provided.
Regards,
Jayaram
Edited by: JAYARAM MAGANTI on Jun 9, 2009 1:14 PM

Hi all,
Has anyone ever faced this issue?
i tried all the options that i think of and as a last attempt even restarted XI engine though it makes no sense. but still i am having the same issue.
If anyone had come across similar kindly update the solution
Jayaram

Error Activating Message Mapping

HI All,
I am getting the below error when i try to activate any message mapping in the IR. Any ideas?
" Starting compilation Source code has syntax error: java.lang.NoClassDefFoundError: com/sun/tools/javac/Main Exception in thread "main"
Thank you in Advance.
D

Hi,
Is there recently been an update like WAS ABAP and WAS JAVA to SPS13(nw2004s)?
Please check this thread there are some pointers in it:
Re: 500 internal server error
Best regards,
Guido

Error in message Mapping(file to file scenario)

Hi friends,
In file to file scenario i am getting error like this while activating standard change list in IR.
Activation of the change list canceled Check result for Message Mapping MM_file2filejuly27 | URN:file2fileJuly27.com:
Starting compilation
Compilation complete
Check result for Software Component Version praba.com | PRABA.COM | 2007 | 0:
The standard error type ExchangeLogData is not defined for the namespace URN:file2fileJuly27.com
Save the software component version definition again. The object is then saved automatically
could you help me out how to correct this error?

Prabha,
You should not delete any existing standard Data types provided by SAP. ExchangeLogData and ExchangeDaultData are standard data types get created when you create new namespace.
If you have already deleted then copy them from other Namespace to your namespace. Activate your default data type first and then your objects.
Hope this will solve your problem.
Nilesh

Error in Message-Mapping transformation

Similar Messages

Maybe you are looking for