Error in MIGO :Number range object for object J_1IINTNUM, year 2010, excise
Dear Experts,
While posting MIGO, System throws below error :
Mainintain number range object for object J_1IINTNUM, year 2010, excise
Maiintain number range object for object J_1IRG23A1, year 2010, excise
Maintain number range object for object J_1IRG23A2, year 2010, excise
Actually we are posting the MIGO for the fiscal year 2009, still i am getting error why ?
regards
rajakarthik.
check the posting date what u r puting , it should be on or before 31/03/2010
i think this is only the issue dont looks like any other issue
or do one thing just o\go in SNRO and for J_1IINTNUM object put 9999 year and the number range
and try to post your transaction in 2009
hope this helps
Edited by: Umakant Bhangale on Apr 1, 2010 10:22 AM
Similar Messages
-
Number range R4 for object BANF nearly exhausted
Dear,
when I use MD15 to convert Planned order to PR, this error message shows up "number range R4 for object BANF nearly exhausted"
I know the range of PR number is nearly exhausted. but could someone teach me how to check it. I mean use which transaction to check what BANF stands for...
Best regards
Meng HM>
Meng HM wrote:
> Dear,
>
> when I use MD15 to convert Planned order to PR, this error message shows up "number range R4 for object BANF nearly exhausted"
> I know the range of PR number is nearly exhausted. but could someone teach me how to check it. I mean use which transaction to check what BANF stands for...
>
> Best regards
>
> Meng HM
Check this path: spro>MM>Consumption based planning>number ranges>define NR for planning run, execute and maintain the interval of planned orders.
Then apply this internval in OPPQ, under number range button.
Edited by: Afshad Irani on Aug 30, 2010 10:34 AM -
Number range 01 for object BANF is nearly exhausted.
Hi ! When we do total planning run in the background we got the message "Number range 01 for object BANF is nearly exhausted.". Our system is configured to create a new purchase requisition for every requirement. I can found that we have reached 98% of our PR number range and the warning message (through SNRO) is set at 2%. As a temporary solution, before I assisgn a new number range to PR, I reduced the percantage for warning message to 1% so that we can get few more days before the number range is changed. But, we continue to get the same error and no purchase requisition is created. Kindly help and suggest.
regards,
Satyathis is probably caused by the buffering. Buffering of numbers is made to increase performance. the Program reads the number range just once to get 10 numbers (and the percentage for the warning message as well, otherwise it would not make sense to use buffers if SAP has to access the number range anytime to check if it is nearly exhausted )
-
Facing problem in Number Range Allocation for Objects in OM
Hello Friends,
I have couple of questions in setting number range for Objects OM :
1) Can we set one single number range for the objects in all planned versions or do we need to set different number ranges for varous planned versions?
2) If we are already using existing Internal Number Range in $$$$ for Objects in OM, how do we set number range External Number range to use it for forthcoming object creation?
3) If we set the External Number Range, will the system use the set num range combinedly for all object types or individually for each object type (Ex: If we have an external num range 100~200, then while creating Org Unit the system may take 100 after that if we try to create another Org Unit the system may take 101 in seqeuence. After creating these two Org Units, if we try create an Position object will the system start allocating the number from 102 or will it again start from 100)
4) Can we default number ranges for various Object Types Planned version wise? If YES, what feature is used to default this number range?
Regards
TharakHi,
For 1). Yes you can set number ranges for all plan versions.
2. You can devide like this.
IN - 00000001 to 49999999
EX - 50000000 to 99999999 - EXT.
3. In my view it is applicable to all Objects.
4. Don't know.
Reward me if helps.
Thanks,
vasu. -
Number Range (series) for Billing Document (F2) and Excise Invoice
Hi All,
I want to know how the number ranges / number series is defined for billing documents (F2) and excise invoice, for India business scenario.
In India, the excise invoice is given to the customer so that he can the excise duty/ cenvat. This invoice acts as the Tax invoice (having all pricing elements apart from excise duty) against which customer outstanding is considered. That is, the payment due will be tracked against this Tax (excise) invoice.
But in SAP, the accounts posting is done (customer a/c debited) when we creaate and post the billing document (type F2). Hence, the outstanding amount is tracked against the billing document created. This billing doc/invoice will have all the pricing components like price, discount, freight, etc apart from excise duty.
The excise invoice is created separately....with ref to the above billing doc....for posting the excise duty.
If the number ranges for billing document and excise invoice are different then it is difficult to trace the outstanding amount from a particular customer on the basis of excise invoice created in the system.
Can somebody provide inputs/solution on this?
Thanks indvance.
Rgds,
AmitHi Saurabh,
My question is not how to define number range for billing doc and excise invoice? i mean what procedure / tcode to be used for the same?
My question is whether we need to define same number range for Billing doc (F2) as well as Excise Invoice.
For example: number range 1000 to 1999 --- same for F2 and excise invoice....
Lets say billing doc 1000 is created. Further, when we create excise invoice w.r.t. this billing doc....the excise invoice created will also need to be 1000. ....so that we can identify that against this excise invoice, we need to collect the payment from customer.
If the number ranges for billing doc and excise invoice are different, then it is difficult for the user to trace the outstanding payment .....because genarally the excise is treated as Tax invoice by companies in India ...(so that the customer can claim the excise duty....when he purchases the goods from the company).
Whereas the customer account is hit when the billing doc is posted .....hence i feel, we need to keep the same number range for billing doc and exice invoice.
Hope the question/scenario is clear now.
I would appreciate the inputs on the above, from the consultants/experts who have worked on SAP implementation projects in India.
Rgds,
Amit -
Re : Maintain number range interval "" for quants
Hi
While doing the transfer order i am getting the following error.
" Maintain number range interval "" for quants "
How to solve this.
Thanks
Antodear sir
go to Tcode : OMLW click for quants tab, give your warehouse number and maintain the number ranges, for your warehouse.
Regards
jrp -
Maintain number range object for object J_1IINTNUM
Dear,
While doing GRN i am getting this error:
Maintain number range object for object J_1IINTNUM, year 2009, excise group
Maintain number range object for object J_1IRG23A1, year 2009, excise group E1
Maintain number range object for object J_1IRG23A2, year 2009, excise group E1
What i did is:
1) I maintained NR for Objects J_1IINTNUM, J_1IRG23A1,J_1IRG23A2 in J1I9 Tcode.
Still i am getting the same error in MIGO.
Regards
Utsav
Edited by: Utsav.agra on Nov 18, 2009 12:24 PMDear Pankaj,
thanks actually i wans maintaining number as 1 instead of 01.
Thanks
Utsav -
PO create error u2018Number range ZB for object not definedu2019
Dear all
I have a error in ME21N to create PO,When I click save button,then occurs a error u2018Number range ZB for object not definedu2019.
I define a PO types:u2019Z506u2019 and assigned to the Number Range u20185Hu2019.The u20185Hu2019 is from 5070000001 to 5079999999 not ext.
The u2018ZBu2019 number range is defined PR,not PO.So I donu2019t know where does define wrong?
Please help me!
Thanks
SunHi
Please check if you have Defined the Number ranges for Document type ZNB in
SPRO-> Materials Management-> Purchasing-> Purchase Requisition-> Define Number Ranges
The reason the error is Coming like that is, in the Customizing of PO Doucment types in
SPRO-> Materials Management-> Purchasing-> Purchase Order-> Define Document Types-> Link purchase requisition - document type
here you have maintained the Link for the PR & The PO.
Thanks & Regards
Kishore -
Maintain number range object for object J_1IRG23C1, year 2008, excise
Dear All,
I am doing the purchase cycle for Assets, while doing GR i am getting the below error, pls guide me
Maintain number range object for object J_1IRG23C1, year 2008, excise
Maintain number range object for object J_1IRG23C2, year 2008, excise
B/regds,
CBDear CB,
Use Transaction "SNUM", and give the object name as "J_1IRG23C1" and maintain number range for the financial year.
Do the same procedure for Object "J_1IRG23C2" and maintain the number range.
Hope this helps.
Njoy SAP
-Saravanaganesh -
Maintain number range object for object J_1IINTNUM, year 2009, excise group
Hi SAP Guru !
Plz tell me the solutions quickly, Even after mantaining the required Objects in "J1I9" , when I am going to post GR , once again it is saying that ........
1 - > Maintain number range object for object J_1IINTNUM, year 2009, excise group
Message no. "4F159" .
2 - > Maintain number range object for object J_1IRG23A1, year 2009, excise group 21
Message no. 4F159
3 - > Maintain number range object for object J_1IRG23A2, year 2009, excise group 21
Message no. 4F159
Regards,
Sandear sir
while maintain number range , in the number column, it should be 01. other than 01, you will get same error.
so please check it should be 01 in the number column and year and number range interval .
regards
jrp -
Maintain number range object for object J_1IRG23A1, year 2007, excise
Hi All,
I have configured CIN in ECC 5.0. When i am doing MIGO getting errror that "Maintain number range object for object J_1IRG23A1, year 2007, " and
Maintain number range object for object J_1IRG23A2, year 2007, excise group 10
but i have already maintained number range for such object.
please guide me.
Regards,
RavindraHi,
Which Number u given,
No year From number to number
01 2007 1 10000
I think u allready given,this is for checking.
Raghu -
Transport Error like Number Range Inteval for 0PRODID is missing
Hello
Iam transporting an infoobject to Quality and got an error like Number range interval for 0PRODID is missing.
But the infoobject which iam transporting is not the 0PRODID but is an Attribute.
can you pls let me know what to do.Hello prasanna
Check with your Infoobject 0PRODID in Quality has got the Number range available.
If not first generate the Number range or go with the RSRV run the test with Master and do the transport -
External Number Range setting for Equipment Not working
As per the Requirement I have assigned A00000000000 - ZZZZZZZZZZZZ to an equipment category through OIEN.
but I am getting the error message in the IE01 screen whenever I try to create an equiment with some external number for this category.
Equipment category does not allow alphanumeric equipment number
Can some one help whether anyother settings are needed.
(It is to be noted that system gives correct error message if I try to create equipment without giving external number - No internal number range defined for equipment category)
Regards
Jogeswara RaoHi Jogeswara Rao,
Check you other post for reply
Plant Maintenance & Customer Service->Master Data in Plant Maintenance and Customer Service->Technical Objects->Equipment->Equipment Categories >>>> Maintain Equiment Category >>>> select your category and check whether you have ticked "No Alphanumeric Equipment Numbers" or not. -
Number range interval for characteristic 0CSTELMNTYP is missing
All,
I'm moving the infoobject 0COSTELMNT, which has as a nav attribute 0CSTELMNTYP. The transport moved fine to my Q environment, but not to prod, The error was as above and
Number range interval for characteristic 0CSTELMNTYP is missing
Message no. BRAIN049
Diagnosis
The interval for number range object BIM0001194 of characteristic 0CSTELMNTYP is missing. The interval is created automatically, when you run the system in the BW clients.
Procedure
Execute the corresponding action again in the BW clients, so that the interval is created automatically. Then you can drag numbers for the characteristic 0CSTELMNTYP to other clients.
I don't understand this - what do I need to do?
Thanks.
DaveHi Kedar,
I got the same issue which you mentioned and i ran the program to activate the master data object and it went fine in Quality system. But the problem here is iam unable to see the attribute data in the master data info object.
For example i added ZCNTYCODE nav. attribute to 0VENDOR and moved to quality and i got the activation problem issue for 0VENDOR and i ran the program which you mentioned in Quality and the activation went fine.
When i loaded the data for 0VENDOR iam not able to see the ZCNTYCODE data in Vendor master data P table. And iam able to see the master data in the table which we get from source LFA1 and in RSA3 and also in the PSA. Can you or anyone faced this type of issue.
Thanks for you help in Advance.
Sudhakar -
Number range missing for characteristic 0AF_SEAN after importing request
Hii friends,
I m facing one problem while transporting request from development to quality , the request contains info object 0MATERIAL in which i have added new attribute 0AF_SEAN.
Then error which i m getting is ,
Number range interval for characteristic 0AF_SEAN is missing
Error when activating InfoObject 0MATERIAL
Characteristic 0MATERIAL: Error when generating master data routines
Error when resetting InfoObject 0MATERIAL to the active version
I am waiting for ur positive reply.
Thanks & Regds,
Kavan Shahhi Kavan,
try
transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists
Error calling number range object 0MATERIAL for dimension D4 ( )
or check oss note 903291 ?
Manual solution
Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
- RS_OBJNUMG: 0000001 - 9999000
- RSDDAGCUBE: 100000 - 199999
- RSSBRAUTH: 00000001 - 99999999
BW 3.0B
Import Support Package 30 for 3.0B
BW 3.10 Content
Import Support Package 24
BW 3.50
Import Support Package 16
BW 7.0
Import Support Package 07
Transporting DataSources
hope this helps.
Maybe you are looking for
-
Error while compiling a program from api....URGENT
i am trying to use a api for apell checking, and their is one program that i am trying to compile using command javac -Xlint org\tiling\didyoumean\DidYouMeanIndexer.java and it gives me an error like this org\tiling\didyoumean\DidYouMeanIndexer.java:
-
Error during OIM schema upgrade during product ugprade from 9.1.0.2 to 11g
Hi All, We have received following error during product upgrade from 9.1.0.2 to 11g. Error occurred during fourth step ( Task 4: Use Upgrade Assistant to Upgrade the Oracle Identity Manager Schema) On the screen while running upgrade assistance (ua.b
-
TS3694 iPod Touch and error "21"
I have tried to restore my son's iPod touch twice and get error message "21". I have updated the iPod and have restarted the computer. The iPod was purchased in Nov 2011 and is a 32 GB iPod Touch. All I get now is the screen with an image of a USB po
-
I Tunes crashes when I try to sync photos (via USB cable provided with Ipad) from computer to Ipad. It worked fine before I downloaded the newest ITunes update. I tried downloading the update again but it still crashed.
-
No high speed where I live so I download my updates on a windows computer onto a flash drive to my Mac. all works fine except quick time. I get to the right download site, click on download and end up on a quick time for windows site. Any ideas on ho