Error in MIGO of Subcon PO in MTO scn, not triggering Movement type 543/E

Dear Consultants,
I am trying to perform Goods receipt against a Subconctracting PO, in a MTO scenario. The components are linked to Sales Order (Special Stock - E). I have maintained '0' in the Individual / Coll requirements field in the MRP 4 view of the component.
So after creation of PO(Subcon), I am trying to perform MIGO - without issuing components to vendor as 541/E movement type for componenets is not allowed in standard.
While performing MIGO I am getting the error no stock available with vendor, the system is trying to trigger 543/O movement type whereas I am expecting 543/E to be triggered for the components.
I am also not able to perform 311/411 E movement type for the components as they are linked to WIP Batch.
Can anyone sujjest if there is a way by which the MIGO should trigger 543/E during MIGO.
Thanks
Arindam.

Hi
i donr think the movement type 543 E will trigger as the subcontracting only supports 543 O in standard , you need to do customizing as follows
Also check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups > here for Movement Type Group "0002", Movement Type "543 E" should be maintained.
just check following link for the subcontracting with sales order ,
[Sub Con 1|http://help.sap.com/saphelp_470/helpdata/en/4d/2b90b043ad11d189410000e829fbbd/content.htm]
[subcon 2|Subcontracting for project stock;

Similar Messages

Change mov.type 543 by other one into MIGO

Dear friends,
Does anyone knows how MIGO determine mov.type 543 to Subcontracting return ?
Is this hard code determination ?
I need to change it to another movement type.
best regards,
Ale

Hi
This movement type is determined by the system internally.
Thnanks and regards
shyam.r

Error in MIGO - Key * (IMKEY) in table VICAAROBJ does not exist

Hi,
I am trying to receive a PO in MIGO and getting this error. This looks like a program error.
Upon further research i found out that there is a SAP Note out for this so i implemented that and also configured the manual steps.
Even after doing that im still seeing the same error.
PO has only one line item with split account assignment

I thought so, had it already open, but this note is talking about displaying FI document with account assignment of an archived real estate object.
As you are not checking FI documents with MIGO it might need some other note to fix this problem.
What is your specific case, is there something archived which is referenced in the PO?
I am actually the opinion that this is pretty much real estate specific and the MIGO transaction is just a mourner.

Error on MIGO with added new field that was not pass empty

Hello,
I added new field and screen to MIGO with MB_MIGO_BADI using Sample
Code. It seems on MIGO. But when i pass empty this new field, i take an
error message. So how can i pass empty for this new field?
Best regards,
Munur

I send all methods codes by order :
Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of code
Edited by: Rob Burbank on Jan 11, 2011 5:12 PM

Error in Migo: Account determination for entry NCSA KDM not possible

We did not setup the account for KDM as we fixed the exchange rate at PO. Did not expect such error when perform GR for foreign currency PO. This happened in our production environment.
In the developement environment, did not encountered such problem.
Would appreciate if anyone had encounter the same issue enlighten us where went wrong.
Regards,
Peck Har

Hi,
Yes, the data entry (PO) is correct. And compare the valuation setting in IMG of developement environment seem alright. Not sure what's else to check.
Regards,
Peck Har

MIGO Goods Receipt multiple Movement Types?

Hi,
Is it possible with MIGO Goods Receipt using Inbound Deliveries to have multiple movement types? the reason I ask is I am getting the following error 'BORGR622 Movement Type XXX not allowed; only 101 is allowed' when trying to receipt a Line no. with different Movement Type to the earlier lines.
We do have the same problem if we receipt in MIGO Goods Receipt directly to the Purchase Order, we can happily post a document which has the normal '101' movement type and another Custom movement type.
The reason for the requirement is to do with Account Determination, we have free bonus goods lines which are zero price on the purchase order - the price difference gets posted to a bonus stock account instead of the usual price difference account, by using a Custom Movement Type - the bonus stock agreement (kind of like BOGOFs Buy One get one free) is passed to the Customer with similar account determination updating the same bonus stock account.
This works fine for MIGO receipt directly with the Purchase Order but we get the error message above with Inbound Deliveries.
I cannot see anywhere obvious in config which might sort this issue, but am unsure why multiple movement types on a Goods Receipt would be allowed against a Purchase Order but not an Inbound Delivery.

Hi,
Try with the below mentioned settings,
goto SPRO -> Materials Management -> Inventory Management & Physical Invetory -> Settings for enjoy transactions -> Settings for good movements(MIGO) -> Settings for transactions & reference documents -> select MIGO_GR -> Click on transaction/event -> select goods receipt -> click on reference documents -> remove the tick mark on active.
Regards,
Prabu

Delivery Note Mandatory in MIGO by movement type

Hello everyone
I would like to know How I can set delivery note as mandatory in MIGO transaction by movement type.
Thanks in advance.

you can not do it the delivery not field by movement type because it is header level field. you can do it by transaciotn but not by movement type
except you do the custom developement

Movement type error for HU GR

Hi Experts,
I am trying to post GR in MFHU transaction for the HU I have created. I am getting the following error. Could you please help me resolve it. The error description I am getting is as below:
Update control of movement type is incorrect (entry 131 _ _ _ F)
Message no. M7226
Diagnosis
The system could not find entry 131 _ _ _ F in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
Regards,
Sachin

Hi,
Refer to below link should help.
Re: Error: Update control of movement type is incorrect (entry 131 _ _ _ F)
Your MM person should help you on this.
Regards,
Vivek

Error in MIGO while GR reversal - Message no. M7021

Hello MM Sapperu2019s,
I got an error in MIGO as meniotned below,
Deficit of Project stock unr. 2,00 PC : XXXXXXX 9093 1111 Q
Up on checking from my side the issue I observed that while executing GR reversal for the PO in transaction MIGO user is getting the error as Deficit of Project stock unr. 21,00 PC : XXXXXXX 9093 1111 Q because there is no project stock available for the relevant material.This I have checked in MMBE transaction for the respective material, Project stock is missing.
Now I need to know if I want to maintain the project stock for the respective WBS element in MMBE and proceed with reversal of GR in MIGO.Please let me know what action I need to take it to resolve this.
PS: PO qty is 26 and IR made first for qty 1 and then GR made for qty 26.
I have also referred the below link in SDN related to this query,
GRN reverse problem
Where it talks about the material issued document reversal which is relevant to me part from that other actions also required I feel.
Cheers,
Kumar.S

KUMAR.S. wrote:
Hello MM Sapperu2019s,
> I got an error in MIGO as meniotned below,
> Deficit of Project stock unr. 2,00 PC : XXXXXXX 9093 1111 Q
> Up on checking from my side the issue I observed that while executing GR reversal for the PO in transaction MIGO user is getting the error as Deficit of Project stock unr. 21,00 PC : XXXXXXX 9093 1111 Q because there is no project stock available for the relevant material.This I have checked in MMBE transaction for the respective material, Project stock is missing.
> Now I need to know if I want to maintain the project stock for the respective WBS element in MMBE and proceed with reversal of GR in MIGO.Please let me know what action I need to take it to resolve this.
> PS: PO qty is 26 and IR made first for qty 1 and then GR made for qty 26.
> I have also referred the below link in SDN related to this query,
> GRN reverse problem
> Where it talks about the material issued document reversal which is relevant to me part from that other actions also required I feel.
> Cheers,
> Kumar.S
Hi,
first u have to reverse the transfer posting (if it is applicable) are directly u can reverse the GI after that u can cancel gr.
u can check the stock in mmbe for every transaction's.
may be it is helpful for u.
Regrds
Raj.

Error in MIGO and Dump in J1IEX?

Hi,
When I am doing MIGO system is giving two error messages:
First, "BED, AED and SED for the excise item is zero
Message no. 4F122"
Second, "Please check excise base for the item is zero !
Message no. 4F121"
I have configured the system to calculate the Excise for this Vendor and material (RM). Please tell me where my configuration is wrong.
Also, system is not calculating the Excise base amount and the Excise duties automatically. Please suggest what should I do to rectify it.
When I am running the J1IEX_C to capture the Invoice for the very first time for this Co. Code I am getting a dump or Runtime error "BCD_ZERODIVIDE". Please suggest wht to do.
Thanks in advance...
Regards
Nitin

Hi,
As you have all taxes in PO, then 1st check the entry of 101 Movement type for capturing Excise in following path:
SPRO -- >Logistics general -- > tax on Goods Movements-- >India -- >Business Transactions-- >Specify Which Movement Types Involve Excise Invoices
Also check the entries of all condition types for BED, AED and SED which specify excise amount are which sort of taxes in following path:
SPRO -- >Logistics general -- > tax on Goods Movements-- >India -- >Account determination-- > Specify Excise Accounts per Excise Transaction
More check link details of Tax procedure
http://wiki.sdn.sap.com/wiki/display/ERPLO/DifferencebetweenTAXINJandTAXINN
Regards,
Biju K

Runtime Error in MIGO Transaction

Hi all,
I am getting error in MIGO i.e. TABLEVIEW_NOT_FOUND_IN_SCREEN. Short text: Table view "TV_GOITEM " does not exist in screen 8200. Error analysis: The screen 8200 of program "SAPLMIGO" specified in the CONTROLS declaration of the table view "TV_GOITEM " contains no description for this element.
Thanks in Advance

Hi,
Please take assistants from SAP if ur client/company have serivces from SAP for the Product.
They will suggest you to track this as the error is from Standard Program
In case if you need to apply SAP OSS Notes related to the Issue/Error for the Trxn, they will guide you
in the right direction.
Thanks & Regards,

QM-Error during MIGO(movmnt type-322)

I have done the UD stock moves to unrestricted.NowI am trying to revert material from unrestricted to quality in the same storage location by movement type 322 in MIGO transaction.
I am getting this error' change the inspection stock of material in QM only'
Pl. help.
Thanks & Regards,
Varun Kumar

Hi,
Reversing Stock Postings Locate the document in its SAP Library structure
1. Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
The initial screen for creating a goods receipt for a purchase order appears.
2. In the field for the movement type, enter
3. 102 (goods receipt for a purchase order into warehouse - reversal). In the field for the purchase order, enter the purchase order number for the original goods receipt.
Note
You can copy the purchase order number from the inspection lot.
4. Choose Enter to display the selection screen for the purchase order items.
5. Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
6. Save the goods receipt and exit the Materials Management component.
7. Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
The initial screen for changing a usage decision appears.
8. Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
9. To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen.
Also check the SAP note : 175842 for Transfer of Unres stk to QI stock.
Hope this will help you.
regards
radhak mk

Error in MB1C but works perfectly in MIGO for movement type 501.

Hi
I get an error in MB1C but works perfectly in MIGO for movement type 501
here is the error Account 353300 requires an assignment to a CO object.
I know for this if we add the co object in OKB9 it works.
But my question is - how it works in MIGO transaction but throws an error in MB1C
Any idea ? has any one faced this kind of an issue ? Please let me know.
Thanks
Dkmurthy

Hi
Are the entires same in both the transactions? Means did you check 353300 GL was hit when you posted through MIGO?
Check in FS00 - for GL account 353300 - under bank/interest tab - double click on field status variant -> under Additional account assignments - CO object is ticked as mandatory?
Thanks

GETWA_NOT_ASSIGNED - Runtime Error in MIGO

Dear All
I am receiving GETWA_NOT_ASSIGNED - Runtime Error in MIGO transaction for a particular user only in production system. I am not able to narrow down is this transaction specific or user issue. I searched the forum and not able to get reason. If someone knows about ths kindly give me a hint.
Regards,
Venkat

Hi,
Please check if any User Exit BADI implemented and have a look into below thread
Reg Dump in MIGO Transaction
GETWA_NOT_ASSIGNED run time error_MIGO processing stock transport order
Shiva

Error while Migo

Hi
while doing MIGO for material type finished goods the system is working fine and changing the movement type in the background
on the other hand same process is not working in case of raw material and while doing migo system is giving following error ' M7064b does not contain any suitable item'
checked for both the material(FG and raw material for any significant difference) , PO history etc.
but could not find any problem
could you suggest what all is needed to be checked in order to resolve it or anyone has faced this problem in the past
Manu

Hi Manu,
First explain the scenario which you are working on?
Is it a normal purchase or what?
Check out the following things incase of PO with raw materials.
1. Check whether you have released the PO if its subjected to release.
2. Check whether a GR doc already exists for the PO with the same qty.
3. Check whether confirmation option is enabled in the PO. If yes then you have to follow the process of inbound delv.
Regards,

Error in MIGO of Subcon PO in MTO scn, not triggering Movement type 543/E

Similar Messages

Maybe you are looking for