Error in MIRO Help Reqd

I have setup new instance. Created p.o & done MIGO things worked fine. In MIRO typically error is seen in tax code. I have assigned Tax procedure TAXGB to country IN. In Fin Acct in tax on sales & purchases defined new taxcode VX with country option IN. Still during MIRO its showing error Tax code VN & Country IN doesnot exist in procedure TAXGB. In error msg its M8 249 & origin is shown as check invoice document.
Help reqd from SAP Gurus pls.
Regards

Check these links
while doing MIRO, i am getting error:-Tax code V0 country IN does not exist
Tax code Z4 country IN does not exist in procedure TAXINJ
Tax code V0 country IN does not exist in procedure TAXINN
Tax code V0 country IN does not exist in procedure TAXINN

Similar Messages

  • Error in MIRO transaction

    hi,
       I am getting following error in MIRO transaction ....Can anybody please fix this ?
    "In company code 3000, the number range 51 is missing for the year 2008"
    Regards
    Vijay

    HI,
    Please check the nuber ranges whether that has been selected as external for the Invoicing.
    If external then please check whether the said no range starting from 51 is included in the external no assignment or no?
    If not then yiu may have to add the same no range and then check.
    Hope this helps.
    Regards,
    Prasanna
    Award pls if helpful.

  • Urgent Help Reqd: Delta Problem....!!!

    Hi Experts,
    Urgent help reqd regarding follwoing scenario:
    I am getting delta to ODS 1 (infosource : 2LIS_12_VCHDR) from R/3. Now this ODS1 gives delta to Cube1. I got one error record which fails when going to cube (due to master data check).And this record would be edited later.
    So I thought of re loading cube and using error handling to split request in PSA and load valid records in cube.Later when I have coorect info abt error, I would load erroneous record manually using PSA.
    I did following steps:
    1)Failed request is not in cube...(setting is PSA and then into target)....also it has been deleted from PSA.
    2)Remove data status from source ODS1.
    3)Change error handling in infopackage to valid " Valid records update, reporting possible".
    4)start loading of cube.
    But when I did this I got following message :
    <b> "Last delta update is not yet completed.Therefore, no new delta update is possible.You can start the request again if the last delta request is red or green in the monitor"</b>
    But both my requests in cube and ODS are Green...no request is in yellow...!!
    Now the problem is :
    1) I have lost ODS data mart status
    2)how to load valid records to cube, since errorneous record can be edited only after 3- 4 days.
    3)How not to affect delta load of tomorrow.
    Please guide and help me in this.
    Thanks in advance and rest assured I will award points to say thanks to SDNers..
    Regards,
    Sorabh
    Message was edited by: sorabh arora

    Hi Joseph,
    Thanks for replying....
    I apolgize and I have modified the message above..
    I just checked in cube...there is no failed request for today...and neither in PSA....Person who has handed this to me may have deleted this is PSA..and why req is not in failed state in cube...I am not sure..though setting is "PSA and then into data package".....
    So how to go frm here....
    Thanks
    Sorabh

  • Error in MIRO:  FF744

    Hello Gurus-
    We are receiving an error in MIRO 'Jurisdiction codes 1400000000 and 1800000000 have different cash discount base control'
    In checking the forum, I found a similiar post and the solution to was to update OBCP but when I go to this transaction, there is nothing to update.
    We are on ECC 6.0 and on Vertex. 
    Any insight will be greatly appreciated!

    Hi,
    Check if your customizing is correctly set in transactions
    OB70, OBY6, OY01.
    Also review F1 online help of field 'Discount base amount is the net
    value' and notes 514938, 300253 and 872130.
    Additionally, review following comments:
    <1> if the flag of  Activate Plants Abroad is activated, then
    'Discount Base Net' in transaction OY01 for the concerned company code
    must be ticked, otherwise, system will use gross amount as cash discount
    base.
    <2>if the flag of  Activate Plants Abroad is not activated, then system
    will read settings in OB70, if 'Disc Base Nt' flag is set, then system
    will use net amount as "ash discount base".
    See also note 882132.
    I hope I could be of assistance.
    Regards,
    Fernando Evangelista

  • Cost center error in miro

    Hey experts... when the user is running miro .. he gets the error like cost element requires a co assignment(KI235)... we made a config for particular element in okb9 which is based on business area vise... but still its getting error in miro.. please help me solve the issue

    hey dev thankss for the reply... i am posting three screenshots

  • Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error."  Please help.

    Photoshop Elements 8.  "Could not use Clone Stamp Tool because of a program error."  Please help.

    Try this:
    Open your picture file
    Access the clone stamp tool
    Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
    TIPS:
    It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
    Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
    Let us know  how you make out with the error message now.

  • Error message "iTunes Helper Resources not available" and saving to wrong Drive

    I am trying to upgrade iTunes to 10.7 on my PC but I keep getting the error message "iTunes Helper Resources not available". Diagnostics take me a support page which talks about not being able to see the device in iTunes - but I can see the device without problems.
    I thought I would try reinstalling iTunes from the webpage and it downloaded to my PC fine but when I went to setup, it showed me it is saving to a DVD drive - not my Hard drive. It also won't let me change the location for the file. I have no idea how that's happened as I obviously don't use the DVD drive as a USB (although the PC see's it as one) and I've never chosen it as the location for iTunes in the 7-8 years that I've been using it.
    I then thought I'd try uninstalling it and reinstalling it (to the correct drive) but again, it comes up that the DVD drive is invalid and won't uninstall iTunes.
    So I'm stuck and haven't been able to find anything helpful on the support pages or in iTunes Help.
    Please someone help ...
    Thanks.

    Try the following user tip. (Probably, the section on clearing the installation database might be best given that you've currently got a drive on the problematic letter at the moment.)
    "Invalid drive X:\" install errors

  • Tax error in MIRO

    Hi,
    I am getting tax error in MIRO while posting transaction.  "tax amount must not be greater than the tax base" msg FF747.
    Invoice amount is 168.91(MIRO)
    PO amount is 55.17
    Tax amount is 113.74
    This error is coming due to Tax amount(113.74) is greater than PO (55.17) amount.
    tax amount is greater than due to heavy import duty.  User wants to post greater tax amount than actual PO amount, could you please suggest how can it be possible to post in SAP, i am trying to post but i am getting above error.
    This error is coming due to Tax amount(113.74) is greater than PO (55.17) amount.
    Thanks,
    Sam.

    Hi Sam,
    I too have the same kind of scenario. The VAT value is more than the base amount. Please inform me the solution applied by you.
    Thanks in advance,
    Pravin.

  • My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    This can be caused by a number of issues.
    Was everything working and then suddenly stopped??
    Or is this a new clean setup and has never worked.
    Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
    Check the IP the MBP gets including dns and gateway..
    Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

  • My ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...

    my ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • New to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

    new to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

    So where is LR trying to copy the files?  Check your destination in the Import panel at the right.

  • Certificate Related Error Message/Please Help

    Today I received an "Unable to verify SSL server pop.gmail.com" message on my Mail server. I transfer mail from gmail to Mail.
    "Mail was unable to verify the identity of this server, which has a certificate issued to "pop.gmail.com". The error was:
    The certificate for this server has expired.
    You might be connecting to a computer that is pretending to be "pop.gmail.com", and putting your confidential information at risk. Would you like to continue anyway?"
    In the lower box, it lists the Version, Serial Number, Issuer Name (which is from Zaire, Western Cape, and lists the organization as Thawte Consulting cc and other info, Subject name is Google Inc, common name is pop.gmail.com, then gives a Signature Algorithm, Parameters, etc.
    It won't let me Copy and Paste so I have not hit the Continue button for concern of losing that info for reference.
    I went to Help which instructed me to do the following:
    I'm getting a certificate-related error message
    If you get an error message with the word "certificate" in it, make a copy of the message and contact your Internet service provider (ISP) or network administrator. The error message may help them diagnose your problem.
    If your mail server uses a self-signed Secure Sockets Layer (SSL) certificate, each time you open Mail you'll see an error message stating that the certificate is not valid. You can continue, but you'll see the same message every time you open Mail. To stop seeing this message, you can permanently accept the certificate.
    To permanently accept a self-signed SSL certificate:
    Click the Show Certificate button in the error message.
    The certificate appears with a certificate icon in the upper-left corner.
    Hold down the Option key and drag the certificate icon to the desktop.
    Double-click the certificate icon on the desktop, and choose X.509 Anchors from the pop-up menu. Click Add.
    The certificate is permanently accepted.
    You must have permission to administer the computer for this procedure to work.
    For information about encryption, click "Tell me more."
    Instead of asking for the "580 Anchors" , it asked simply "Do you want to add the certificates from pop.gmail.com.cer to a keychain?"
    I clicked "Add"
    The pop.gmail.com certificate AND Thawte Freemail Member AND Thawte Personal Freemail certificates is now entered in my Keychain.
    There are no dates listed under "Created" or "Modified" for those certs under Keychain.
    IS THIS OK OR DO I HAVE A PROBLEM SINCE THESE THAWTE CERTS ARE LOCATED IN ZAIRE???
    IF IT IS A PROBLEM, HOW DO I FIX/CHANGE/OK/DELETE/MODIFY, ETC. IT? PLEASE BE CLEAR.
    CAN I/SHOULD I JUST DELETE ALL THREE/SOME OF THE CERTS NOW IN KEYCHAIN?
    WILL I STILL BE ABLE TO GET MAIL AS BEFORE THIS MESSAGE IF DELETE THE CERTS?
    I believe this is the first time I have received a message concerning certificates so I am naive concerning this.
    THANK YOU.

    I had similar gmail/cert problem yesterday - not for the first time!
    I deleted the prefs (user/library/preferences), deleted the gmail account (mail prefernces), ran applejack ( http://applejack.sourceforge.net/ ) & added the account from scratch.
    Annoying I know, and my inbox was 200+ emails but nobody seems to know what or why this happens (my previous post) http://discussions.apple.com/thread.jspa?threadID=243186&tstart=0
    Perhaps this is related to certain emails (an email scam), i run 3 macs & the mail account on the affected machine receives my business email & this is the only machine the gmail/cert problem occurs.

  • It says "error 7, windows error 127" Please help

    It says "error 7, windows error 127" Please help

    I tried that, got this error:
    An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50.727.6195".publicKeyToken="1fc8 b3b9a1e18e3b".processorArchitecture="x86". Please refer to help and Support for more information. HRESULT: 0x8007422.
    Please help!

  • Error In MIRO GL  account allows only output tax

    Hello All,
    We are facing an error in MIRO that GL account xxxxx allows only out put tax. The scinario & settings are as  below.
    FB60
    There is no error when using the particular tax code sytem posts the document
    MIRO
    Same vendor & tax code used as in FB60
    The systemshows an error that GL  ***** allows only output tax.
    TAX CODE settings in FTXP
    The GL showing error is in tax code
    GL settings
    In GL master data in control tab , the tax category is defined as out put tax
    QUERY
    Why in FB60 it allows the GL & not in MIRO ( Both are vendor invoice and suppose to work in similar manner)
    please note in both the cases the entries are same
    Vendor Cr
    Expense / Stock Dr
    VAT GL **** Cr
    VAT GL-2 Dr
    VAT GL**** is not picking @ MIRO & Picks @ FB60 with out any error
    Any Idea !!!
    Thanks & Regards
    Arun R

    Hi,
    The problem is resolved .
    The error was due to the fact that the VAT was an aquisiton tax for europe.
    The details are in note  373587
    Thanks for the support
    Regards
    Arun

  • CO OBJECT ERROR IN MIRO FOR UNPLANNED DEL COST

    Dear Friends
    I m facing one error in MIRO can u guide me in that context.
    well in MIRO i m postin Unplanned deliver cost.......and it is asking me assignment to this G/L for Cost center object..
    ERROR: Account 40201070 requires an assignment to a CO object
    ..I have already assigned the Cost center for the G/l in OKB9 is there anything else has to be done
    Actually we have 4 plants and 4 Business area i.e whenever i am doing any posting for BW01 -and Business Area BA01 My cost center BW01402 will get hit similarly for other plant and Business are Cost center has been assigned in OKB9 in Details per business Area,is it the right method or anything else has to be done.
    Actually in OKB9 i have maintained that GL and in Detail per business area i have maintained cost center per business area
    we have assigned the right Cost senter only i.e for different Plant and differenct business area we have asigned different cost center.
    Then y i m getting error i m not understanding..
    Please guide me in this context.
    Also i am trying other method of posting Freight (unplanned delviery cost ) as well as labour charge through ACTIVATING -"Activate Direct Posting to G/L Accounts and Material Accounts"
    So that for particular G/L I can Debt or credit that account,in which will doing MIRO G/L Tab gets activated ,i m entering G/L and entering amount for freight and Labor is this the correct procedure.
    Regards
    shailesh

    I have already assigned this G/L as primary cost element in FS00 and in OKB9 also Cost center is assigned as per Business Area as mentioned in the thread
    i.e we have 4 plants and 4 business area so we assigned 4 cost centers to 4 business area, so whenver i m postin unplanned delivery cost for a particular plant then my GL should hit with proper cost center but still it is asking for CO OBJECT
    ERROR IS:
    "Account 40201070 requires an assignment to a CO object"
    If i maintained the default Cost center in FS00 in cost element then it doesnt give error but my requirement is that for a particular plant ,and business are only cost area assigned to it should hit
    Any other solutions.
    Thankz and regards
    Shailesh

Maybe you are looking for