Error in MMPV-The specified year 2007 is not the current calendar year

Hi,
Warning Error in MMPV-The specified year 2007 is not the current calendar year
When I press ok, still the error is coming again.
Regards,
somiraghu

hi,
Do check the last period at OMSY...
If its 12 2006,
Then go to MMPV..
Enter 01 2007...
Press the execute button...
system show the warning message...
then press the outer execute button..
system will show you the log..
Then again go to OMSY and check the changes...
Go on opening till you reach the current one..
From FI side you can open the periods via OB52...
Regards
Priyanka.P

Similar Messages

  • SAP BW DTP error: Fiscal year variant is not maintained for calendar year

    Hi experts,
    Running DTP for loading 2LIS_12_VCITM results in following error "Fiscal year variant A2 is not maintained for calendar year 2012".
    I have already done following checks:
    - the fiscal variant A2 exists for the fiscal year 2012 in the BW system (T009 tables)
    - the DTP does only give this error for 2 company codes, and works fine for other company codes
    - in our R3 system, the fiscal year variant A2 is assigned to all the company codes, how or where can I check this assignment in the BW system ?
    Kind regards, Guy Verschueren

    Hi
    Please check the following threads
    "Fiscal year variant V3 is not maintained for calendar year 2011" (OAOB)
    Error FGV002: Fiscal year variant & is not maintained for calendar year &
    Hope it helps.
    Thanks,
    Rajesh.
    Please assign points to answers if you find them heplful

  • Fiscal year variant is not maintained for calendar year 2009

    Hi,
    After upgrade to BI 7.0 we are getting error: "Fiscal year variant & is not maintained for calendar year 2009" while opening a query through Bex Analyzer.
    Basically it is happening like when we open a particular query, the Variable selection screen comes up, then on clicking the exection button (after selection) it shows SYSTEM_FAILURE exception & clicking the details button, shows the message ""Fiscal year variant is not maintained for calendar year 2009"
    Please provide some information/resolution to this.
    Thanks,
    Shantanu.

    HI,
    Please ensure that you have defined your fiscal year variant in OB29
    correctly.  It is necessary that:
      1.  the previous year has been maintained,
      2.  an entry for Dec 31 exists in each fiscal year,
      3.  the following fiscal year has been maintained.
    Hope this helps.
    Regards,
    Nitin

  • Error FGV002: Fiscal year variant & is not maintained for calendar year &

    Hi all,
    I am facing a unique problem in BW production. This is not happeneing in my Development.
    Whenever I goto table    "/BI0/SFISCPER" or do F4 on any Fiscal Year / Peiod field, I get the message " Error FGV002: Fiscal year variant R1 is not maintained for calendar year 2005"  . In my client R1 is Shortened Fiscal Year.  But we are not using this for year 2005 and most years. And the message is Type Error. I tried to debug but the code enters in 100 odd Function Modules and does not give any answer.
    My Finance Person has checked the settings in transaction SPRO > SAP Reference IMG > BW Customizing Implementation Guide > Business Information Warehouse > General BW Settings > Maintain Fiscal Year Variant). They are exactly identical to R/3 production setting.
    I have already done rebuild of Fiscal Year Variant from Source System by right clicking and loading data again.
    I am using BW 3.0B with Bi Content 3.1 . Please advise urgently.

    Hi TCS
    Please check these SAP notes in advance:
    1619823
    1835628
    Please advice if this helps.
    Regards
    PC

  • The specified year 2011 is not the current calendar year 2012 in MM?

    Hi,
    when I am doing the MIGO transaction i am getting the error like this, The specified year 2011 is not the current calendar year 2012
    I gone throught the t coded like: MMPV, MMRV, OMSY, OB52
    As per my company, fiscal yerar is v3 (Apr - Mar)
    So now i am in posting period 10(Jan)
    And my OB52 settings are       1-2011-12-2011-13-2011-16-2011
    In OMSY       2012-10-2012-9-2011-12
    Here system displays as my fiscal year is 2012 and last FY is 2011.
    I can't find out the mistake where it was. As a FI guy I know there is no mistake in FI side.
    IN MMRV
    Current period            10 - 2012
    Previous period          09 - 2012
    Last period in last Fy  12 - 2011
    When i am trying to chage the last FY in OMSY, it is grayed out. I reveiwed some of the threads and based on that i was removed my Plants in OX18 also.
    Pls guide me how to slove this..
    Regards,
    Gamidii

    Hi,
    OMSY cannot be modified because plants are configured with the Company code.
    First you need to unmap the plant with company code. Go to OX18 and delete the plants which have been mapped with your company code.
    Then change the OMSY period. Once you have changed the period, map the plants with company code in the OX18.
    And go to OMWD and assign Valuation grouping code for all the plants as "0001". 
    Please try it out in Quality server. Thanks.
    Regards,
    Vijay N

  • The specified domain either does not exist or could not be contacted when logging in through RDP. Server 2012/SBS 2007

    I have a server 2012 machine running RDP and a PDC running SBS 2007. Every once a while all my users get an error saying "The specified domain either does not exist or could not be contacted". After waiting ~5-10 minutes the issue resolves itself.
    I believe it has something to do with the syncing between the two but am not 100% sure. Anyone know a fix or what I should look at? 
    Jerry T

    Hi Jerry,
    Thank you for posting in Windows Server Forum.
    After referring to your error, it seems to have DNS issue in your case which can’t locate the DC. Please check the setting related to DNS issue as following. (Below quoted from
    this thread)
    If this is the case, I would recommend proceeding like that:
    1. Make sure that each DC has only one IP address in use and ONLY one NIC card enabled (Other NICs should be disabled)
    2. Make sure that public DNS servers are configured as DNS forwarders and not in IP settings of DCs
    3. Choose a healthy DC / DNS server and make each DC point to it as primary DNS server
    4. Make each DC / DNS server point to its private IP address as secondary DNS server
    5. Make sure that needed ports for AD replication are opened: http://technet.microsoft.com/en-us/library/bb727063.aspx
    6. Check your DNS zones and remove manually all obsolete / unused DNS records for DCs
    Once done, run ipconfig /registerdns and restart netlogon on each DC you have.
    On the client computer, run ipconfig /flushdns and check again.
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • RDS Gateway + Smart Card Error [ The specified user name does not exist.]

    I have the following Windows Server 2008 R2 servers:
    addsdc.contoso.com, AD DS Domain Controller for contoso.com
    adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
    fileserver.contoso.com, RDS Session Host for Administration enabled
    rdsgateway.contoso.com, RDS Gateway enabled
    tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
    And the following Windows 7 PCs:
    internalclient.contoso.com
    externalclient.fabrikam.com
    There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
    I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
    From internalclient.contoso.com, I can RDP to fileserver.contoso.com
    using the smart card just fine with no certificate errors.
    From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
    via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
    From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
    via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
    BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
         The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support. 
    When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
    - but I'm pretty sure this is a supported scenario?
    The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
    [email protected] which matches the UPN of the user account as it was auto-enrolled.
    Does anyone have any ideas?

    I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
    to use NLA.

  • Error (Data mining): The specified mining structure does not contain a valid model for the current task.

    I'm trying to run the Cross validation report on a mining structure that contains just Microsoft Association Rules mining model. In Target Attribute, I've tried:
    Actual(Service Description).SE value
    Actual([Service Description]).[SE value]
    Actual(Service Description)
    Actual([Service Description])
    just because i don't know what is the exact correct format, but none of them worked, and I always get the following error:
    Error (Data mining): The specified mining structure does not contain a valid model for the current task.
    the following is my mining model structure

    Association rules does not allow for cross-validation
    Mark Tabladillo PhD (MVP, SAS Expert; MCT, MCITP, MCAD .NET) http://www.marktab.net

  • Daqmx error num: -50103 with message: The specified resource is reserved. The operation could not be completed as specified.

    Hi, I am running a program where I have 4 nidaq cards on a single machine, all connected. I am trying to start a counter and keep getting that error (daqmx error num: -50103 with message: The specified resource is reserved. The operation could not be completed as specified.) in two places in my code. I understand what the error means (you can only have one task of a type per card), but I don't see where that is occuring in my code.
    See below for code. I noted the two places where the error is occuring. I am debugging someone else's code, which is part of the problem.
    Thanks!
    counterTask = 0;
    daq_err_check( DAQmxCreateTask( "counter_generation_task",
    &(counter_generation_task) ));
    daq_err_check( DAQmxCreateTask("counter_count_task",
    &(counter_count_task) ));
    char co_chan_name[40];
    char ci_chan_name[40];
    char ci_trig_chan_name[40];
    sprintf( co_chan_name, "%s/ctr0", niDev);
    sprintf( ci_chan_name, "%s/ctr1", niDev);
    sprintf( ci_trig_chan_name, "/%s/PFI9", niDev);
    printf("OK1");fflush(stdout);
    daq_err_check( DAQmxCreateCOPulseChanTicks( counter_generation_task,
    co_chan_name, "", "ai/SampleClock",
    DAQmx_Val_Low, 32,16,16) );
    daq_err_check( DAQmxCfgImplicitTiming( counter_generation_task,
    DAQmx_Val_ContSamps, 1000) );
    daq_err_check( DAQmxCreateCICountEdgesChan( counter_count_task,
    ci_chan_name, "",
    DAQmx_Val_Rising, 0, DAQmx_Val_CountUp) );
    daq_err_check( DAQmxCfgSampClkTiming( counter_count_task,
    "Ctr0InternalOutput", 1000.0, DAQmx_Val_Rising,
    DAQmx_Val_ContSamps, 1000) );
    daq_err_check( DAQmxSetRefClkSrc( counter_generation_task, "OnboardClock") );
    daq_err_check( DAQmxSetRefClkSrc( counter_count_task, "OnboardClock") );
    printf("abt to start counter_count\n"); fflush(stdout);
    daq_err_check ( DAQmxStartTask( counter_count_task ) ); // ERROR OCCURS HERE
    printf("abt to start counter_gen\n"); fflush(stdout);
    daq_err_check ( DAQmxStartTask( counter_generation_task ) ); // ERROR OCCURS HERE
    fflush(stdout);
    Thanks again for your patience!

    I get it when capturing from my mini DV cam (which is not controllable by FCP). To resolve, I have to click Capture Now a split second after I start the DV tape rolling.

  • System error 86 has occurred. The specified network password is not correct. - despite the NTLMv2 fix

    After the Windows 2008 R2 64 bit server got below 2 updates a network share is no longer available. And trying to remap it with correct credentials (that work on a Windows 8.1 64 bit) gives this error: "System error 86 has occurred. The specified network
    password is not correct."
    Local Policies -> Security Options -> Network Security: LAN Manager Authentication Level
    is already set to "LM and NTLM - use NTLMV2 session security if negotiated"
    In fact this is how it was working earlier. And it hasn't been changed.
    Below 2 updates were installed in past few days:
    Definition Update for Microsoft Endpoint Protection - KB2461484 (Definition 1.185.3528.0)
    Update for Windows (KB974405)

    Hi,
    Does the network share a DFS share? If so, please install the hotfix below to check the results.
    You cannot access a DFS share by using a valid user account in Windows Server 2008 R2, in Windows 7, in Windows Vista or in Windows Server 2008
    http://support.microsoft.com/kb/2549311
    Best Regards,
    Mandy 
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error:"The specified tag name was not found"

    Hello:
    My problem is the FieldPoint error message in LabWindows/CVI v6.0.
    When hook up with Ethernet module(FP-1600), NO Problem on the source code, specially item Name "All". See the actual code.
    if(status = FP_CreateTagIOPoint (ServerHandle, resourceName, deviceName, "All",&IOPointHandle))
    But When hook up with RS-232C Module(FP-1000), occured error. The error code is 32812, that means "The Specified tag name was not found."
    What makes this error? Why item name "All" makes the error when using FP-1000?
    Please help me.
    Thank You.

    Make sure the resourceName and deviceName match what is in FieldPoint Explorer. See the following KB:
    http://digital.ni.com/public.nsf/websearch/02EB73D02715981A8625682B00774F8F?OpenDocument
    Also, I have seen this error when targetting serial modules with FieldPoint Explorer open. Make sure FP Explorer is closed.

  • Cannot optimize volume - Receive error "The specified extrinsic Method does not exist"

    When I try to optimize a volume on a server running Windows Server 2012 (R1). I receive the below error. This volume is an ISCSI target to our Compellent SAN. Other Servers don't have an issue with volumes created on the same SAN and I have already ran ChkDsk
    and it returned no errors. Oddly enough I can run a "Defrag T: /D" but a "Defrag T: /O" returns
    "Incorrect Function. (0x80070001)" (Incidentally an "Optimze-Volume T -Defrag" also works) 
    Any Ideas? I'm stumped!
    Command:
    Optimize-Volume -DriveLetter T -Verbose
    Error:
    VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchLogFiles (T:)...
    VERBOSE: Slab Analysis:  100% complete.
    optimize-volume : The specified extrinsic Method does not exist.
    At line:1 char:1
    + optimize-volume -DriveLetter T -Verbose
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : MetadataError: (MSFT_Volume (Ob...2-a802-ba7e...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
        + FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume

    I did stumble upon that article as well and working through it didn't help. This is an Exchange 2013 server but I wouldn't think that that would exclusively cause a problem like this (unless there is something under the hood that Exchange 2013 is secretly
    doing). The C drive is for the OS, the M drive is for the Exchange DB, and the
    T drive is for the Logs.  The C drive is "directly" connected and the M and T drives are on the same SAN (different LUNs) via iSCSI. This is running as a virtual guest on VMWare ESXi v5.5.  I have other servers setup the
    same way (not Exchange servers though) with drives on the iSCSI SAN and there are no issues when I run those Optimize-Volume commands. Here is some more output from the console:
    PS C:\Users\administrator> Optimize-Volume -DriveLetter T -Analyze -Verbose
    VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchLogFiles (T:)...
    VERBOSE: Slab Analysis: 0% complete...
    Optimize-Volume : The specified extrinsic Method does not exist.
    At line:1 char:1
    + Optimize-Volume -DriveLetter T -Analyze -Verbose
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : MetadataError: (MSFT_Volume (Ob...2-a802-ba7e...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
    + FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume
    PS C:\Users\administrator> Optimize-Volume -DriveLetter M -Analyze -Verbose
    VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchMailStoreDB (M:)...
    VERBOSE: Slab Analysis: 0% complete...
    Optimize-Volume : The specified extrinsic Method does not exist.
    At line:1 char:1
    + Optimize-Volume -DriveLetter M -Analyze -Verbose
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : MetadataError: (MSFT_Volume (Ob...2-93f1-0050...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
    + FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume
    PS C:\Users\administrator> Optimize-Volume -DriveLetter C -Analyze -Verbose
    VERBOSE: Invoking analysis on (C:)...
    VERBOSE: Analysis: 0% complete...
    VERBOSE: Analysis: 22% complete...
    # ... Repeated ...
    VERBOSE: Analysis: 94% complete...
    VERBOSE: Analysis: 99% complete...
    VERBOSE: Analysis: 100% complete...
    VERBOSE: Analysis: 100% complete.
    VERBOSE:
    Post Defragmentation Report:
    VERBOSE:
    Volume Information:
    VERBOSE: Volume size = 84.48 GB
    VERBOSE: Cluster size = 4 KB
    VERBOSE: Used space = 63.18 GB
    VERBOSE: Free space = 21.29 GB
    VERBOSE:
    Fragmentation:
    VERBOSE: Total fragmented space = 4%
    VERBOSE: Average fragments per file = 1.23
    VERBOSE: Movable files and folders = 153593
    VERBOSE: Unmovable files and folders = 6
    VERBOSE:
    Files:
    VERBOSE: Fragmented files = 2745
    VERBOSE: Total file fragments = 35394
    VERBOSE:
    Folders:
    VERBOSE: Total folders = 4819
    VERBOSE: Fragmented folders = 2
    VERBOSE: Total folder fragments = 2
    VERBOSE:
    Free space:
    VERBOSE: Free space count = 74005
    VERBOSE: Average free space size = 296.00 KB
    VERBOSE: Largest free space size = 409.42 MB
    VERBOSE:
    Master File Table (MFT):
    VERBOSE: MFT size = 308.00 MB
    VERBOSE: MFT record count = 315391
    VERBOSE: MFT usage = 100%
    VERBOSE: Total MFT fragments = 4
    VERBOSE: Note: File fragments larger than 64MB are not included in the fragmentation statistics.
    VERBOSE:
    You do not need to defragment this volume.

  • Error creating EO- The specified schema object is not an existng object

    hi,
    I am getting an error "The specified schema object is not an existing object .Please un check Exisiting Object or select an exisiting object" while creating an EO.
    Does any one knows how to get rid of it.
    Thanks,
    Murlai

    Hello
    Looks like this is an old thread, but since I had the same problem and figured it out, I though I'll share it here:
    What I figured is that in the Select Schema Object wizard, if I prefix the schema object with the schema name, then the attributes are fetched from the database. like this:
    dbo.employeeinstead of this:
    employeewhich is kind of strange because the schema is already mentioned in the database schema section and jdeveloper fills the object value after we choose it.
    Good luck

  • Can someone please help me!! I keep trying to download itunes but get a message that and error has happened 2/3 and check window activity. Then it shows A sever with the specified host name could not-- and then it cuts off the rest of the message.

    I keep trying to download itunes in Safari but get a message that and error has happened 2/3 and check window> activity. Then it shows A sever with the specified host name could not…… and then it cuts off the rest of the message. I have reset Safari and still nothing!!!
    Very frustrated!!!

    It's downloading with Firefox 3.6.27 as I write.  It's probably more a Safari problem in your case for which people on the Safari forum could provide suggestions.  Or mybe just try again in a while as I suspect everybody is downloading right now.

  • A sporadic compile error vbc : error BC31019: Unable to write to output file 'D:\Revit\Dev32\RevitAdditions\Source\..\Intermediate\ReleaseWin32\VBNETSnippets\VBNETSnippets.dll': The specified image file did not contain a resource section.

    Hi,
    This is developer from Autodesk. We get this compile error from time to time. This is a sporadic failure. We can't find any issue in our own project.
    vbc : error BC31019: Unable to write to output file 'D:\Revit\Dev32\RevitAdditions\Source\..\Intermediate\ReleaseWin32\VBNETSnippets\VBNETSnippets.dll': The specified image file did not contain a resource section.
    I find a help doc from the website to try some steps to solve this issue.
    Error ID: BC31019
    To correct this error
    Compile the program again to      see if the error recurs.
    If the error continues, save      your work and restart Visual Studio.
    If the error continues, restart      the computer.
    If the error recurs, reinstall      Visual Basic.
    If the error persists after      reinstallation, notify Microsoft Product Support Services.
    My question is what the root cause for this issue. Could you please give us some explanation where the issue should be,  VB compiler? .Net Framework?
    Visual Studio? Operating system?
    Thanks
    Wilson

    Hi hitzwx,
    Thank you for posting in MSDN forum.
    Since this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
    System, and Visual Studio Editor.
    Based on your issue, I am not sure what the root cause for this issue. But I suggest you can try some suggestions so that narrow down this issue.
    (1) I suggest you try to create a new simple VB project and then check this issue.
    (2) In addition, maybe you see the document about your issue. If possible, I suggest you can try these suggestions to troubleshooting this issue.
    https://msdn.microsoft.com/en-us/library/85s7w197.aspx
    >>Unable to write to output file 'D:\Revit\Dev32\RevitAdditions\Source\..\Intermediate\ReleaseWin32\VBNETSnippets\VBNETSnippets.dll': The specified image file did not contain a resource section.
    In addition, I suggest you can check if the specified image file in the output folder or you can try to click your image file in the Solution Explorer-> select the Copy to Output Directly properties->Copy always check this issue again.
    If you have any update message about your issue, please tell me.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for