Error in Mobile Administrator

Hi,
on our Webas 6.40 SP18, I have configured the Mobile Administrator, according to the MI Installation Guide. When I access "

problem handled in different thread
Message was edited by:
Thorsten Gerhart

Similar Messages

Error in Mobile Administrator, section device maintenance

Hi,
on our WebAS 6.40 SP18, I have configured the mobile admin according to the MI Installation Guide. When I access the section "Device Maintenance" and perform any search, I get the following error:
com.sap.ip.mi.admin.core.ApplicationException: Connection couldn't be recreated: 1 cause: Encountered invalid managed connection, last cause Couldn't execute interaction. 2 cause: Couldn't execute interaction.
I can see the list of devices, but if I mark one, I don´t get the details of it. What could be the cause?
Cheers,
Thorsten

update on above reply-;
Find the comlete list of authorization listed below-:
S_RFC                                ACTVT
SDIFRUNTIME
SYST
SGOO
SRFC
SYSU
SYSO
MEMGMT*
MEREP_INSTTK_MPC
MEREP_JAVACLIENT
ME_CENTRAL_TRACING
BWAF_MW
BWAF_MOMO
BAPT
BWAF_INSTALLATION
MI_PACKAGE_GEN
ME_MON_SHLP
ME_QUEUE_MON
ME_TECH_MON
RFC2
SDDO
TCD
DEVICE_CONFIG S_MOMO
S_MI_MGMT
MI_GROUP
S_USER_GROUP
ME_CONFIG_INFO
ME_USER
RFC1
S_RFC_ADM

Problem in MI 7.0 Mobile Administrator

Hi,
I was configuring MI 7.0 in NW 7.0 SP09. But the Mobile Administrator application is not at all running. It is showing error message "Connection can not be recreated". I navigated to the Web Dynpro Content Administrator and found that all the applications under sap.com/tcmobileadmin~ui
referencing to sap.com/tcmobileadminea which having status RED. But sap.com/tcmobileadminea in Visual Administrator is running.
Other links in Mobile Administrator showing error "Can not start plug in" .
Can anyone suggest me what may be the problem?
Thanks & Regards,
Subhayu De Sarkar

Dear Subhayu,
This post is common to both of your related threads.
First of all, you have not answered my question of not having a server with latest patches. If it was a new server, you could have started off with NW 7.0 SR3 setup (which gives you SP 14 by default) and then apply the rest of the packages.
Find below my answers to your questions:
1. If I follow the template based configuration then the JCO-RFC provider name differs with the document.
A: Yes they might differ. Configuration, if done the manual way, does not need the use of template, but initially if chose, the template would have saved a lot of your time.
2. The document suggests that the JCO Destinations should be created using the MI Admin Service user. But that user is not allowd to create JCO Destination. It is having access problem.
A: Generally, I give the j2ee_admin (ABAP) role to the MI admin and the mobile super admin, additional admin roles similar to j2ee_admin (UME) to the MI admin, since generally, the MI admin is the j2ee admin too.
3. The document suggests to use MI Admin Service user in CIM Client Generation is SLD Supplier service in VA. But this user is not allowed to be used as SLD Service provider.
A: I have used the user j2ee_admin for the same in all my MI installations
4. The template based MI configuration can not register RFC destination. By default it takes the DDIC user for the it but DDIC does not have access to maintain the MEMGMT_J2EE_DEST table.
A: Use manual/template based, dont use both. As a note, the template configs will supersede the manual configs. You can use an admin user, who is having the ABAP roles SAP_MI_ADMIN and J2EE_ADMIN
Regards,
Veera

Is MI WebConsole and NetWeaver Administrator- Mobile Administrator SAME ?

Hi
I am trying to access MI - WebConsole but could not make it.
I have SAP Web AS 7.0 with MI 2.5 installed with latest service packs. After all configuration (SAP MI 2.5 SP17 Standard install/config guide), I could not get SAP MI WebConsole. Getting 404 error.
After reading few documents I have an assumption/suspection that
MI WebConsole is for SAP Web AS 6.4 and
NetWeaver Administrator -> Mobile Administrator for SAP Web AS 7.0
to do the same functionality.
So the question is...
is MI WebConsole (http://<server:port>/me/WebConsole/login
will not work in SAP Web AS 7.0 as it has been replaced by NetWeaver Administrator -> Mobile Administration ?
(http://<server:port>/nwa
If not, do we still need MI WebConsole inorder to make communication between R/3 (ABAP stack) and MI 2.5 Client(laptop)
Even http://<server>:50100/me is not working. Always getting 404 Error.
I have http and https configured successfully.
Please advice.
Here is my system landscape for the reference:
SAP MI 2.5 (middleware) -> installed in a separate server with ABAB+JAVA stack and SAP Web AS 7.0.
SAP ERP 2005 (backend) -> installed in a separate server with ABAB stack only and SAP Web AS 6.40
SAP MI 2.5 (client) -> installed in a laptop with Windows XP Pro.

hello sri,
java sync servlet and MI WebConsole will still be supported
for awhile when the Mobile NWA gets matured...
MI WebConsole is only an administration tool, the MI Sync
Servlet is the one responsible for data transfers from
your MI client to MW. In 7.0, the Mobile NWA will become
the primary tool instead of the MI WebConsole and java
sync servlet will also be substituted by the ABAP sync
service. you can easily configure you MI using templates.
your errors might be some configuration problems.
try tracing for exceptions in your J2EE visual admin.
regards
jo

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required to install. The apps have already been installed. The users cannot run them unless they are in the local admin group.Using "Run as admin" does not work. It gives the same error.
I have opened a case with adobe support and was basically told to suck it up and put the users in the admin group. Actually, what was said was that it is "mandated that the users have administrative rights".
There are a couple of things wrong with this. It was working for both users until recently - a recent required creative cloud update. The users have never been local admins yet the apps were working (poorly, but working).
We are in an enterprise environment and users simply do not have administrative rights on the computers.
I have changed permissions on all adobe folders, granting users or authenticated users modify or full control rights, did the same in whatever Adobe registry HKLM keys I could find. Nothing has allowed the users to run the apps - unless they are put in the local admin group.
Someone has to have a fix for this. Adobe apps have proved to have far too many vunerabilities to even entertain the idea of elevating user rights. I can't imagine that enterprise environments are allowing this.
Any help or suggestions are greatly appreciated.

Jeff,
Thank you for your response. The users in question are "standard" domain users. We do not reduce users permissions below the standard level.
The apps do not load with their current standard user permissions.
The thing that makes this odd, is that up until recently they did this issue with cloud apps. The only way I can make it work for them now is to put them in the local administrator group on their pc's - which is not going to happen.
This is what they now see. As I said before, this was not a problem up until recently they would see all their available apps. If I put them in the local admin group the apps are listed without having to install. Everything is there, just not accessible to the user.

HT1926 When trying to install iTunes, I'm getting the following error "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services". How do I fix this?

When trying to install iTunes, I'm getting the following error "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services". How do I fix this?

SAME EXACT PROBLEM! SO FRUSTRATED AND ****** OFF!

IPMA Assistant Console: âSystem Error: Please contact Administratorâ

Version of CCM used 4.1(3)sr2
I have setup a 2:1 (manager (lukes & hans) : assistant(leiao)) IPMA shared line config for the first time (successfully setup 1:1 shared line configs before) and once the assistant loads IPMA Assistant Console (IPMA AC) on PC1, enters her IPMA AC credentials, click OK the assistant gets the following error message âSystem Error: Please contact Administratorâ. I can confirm that IPMA AC works on PC1 (XP Pro SP2 Windows FW disabled) as other 1:1 assistants can log into IPMA AC successfully. leiao also gets the same message when she logs into PC2 (XP Pro SP2 Windows FW disabled) and PC3 (XP Pro SP2 Windows FW disabled ) that have IPMA AC installed. From a telephony point of view all IPMA setups (1:1 & 2:1) work as expected its just IPMA AC doesn't work for 2:1 IPMA shared line setups.
I have deleted lukes, hans and leiao device user profile and user profile, restarted the Tomcat IPMA service and re-created the profiles and still the same problem. In desperation I have even rebooted the CCM Pub & Sub and still leiao gets the message above.
lukes
8001 - External DDI
1001 - Internal Ext
3001 - Intercom
Hans
8002 - External DDI
1002 - Internal Ext
3002 - Intercom
Leiao
8003 - External DDI
8002 - hans
8001 - leiao
3003 - Intercom
I have noticed looking at the IPMA Service trace logs on CCM that CCM recognises leiao user as a ProxyLineAssistant instead of a SharedLineAssistant like all other 1:1 assistants?? I setup the managers and assistants in the 2:1 config the same as 1:1 shared line config but CCM appears to think that leiao is a ProxyLineAssistant??
Does anyone have any hints or tips on how to solve this, any further info required please let me know :-)
Thanks for your assistance :-)
Kind regards
Anthony.

delete the old assistant (DWAssist). Remove it from the manager's IPMA configuration and substitute it with a new assistant (DWAssist1). After reconfiguring IPMA accordingly, restart tomcat services

Getting error in course administration

Hi LSO!
we are getting the error in course administration
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_LSO_MGR_ADMINISTRATION~GET_UPCOMING_COURSES of program
CL_LSO_MGR_ADMINISTRATION=====CP
Method: IF_POWL_FEEDER~GET_OBJECTS of program
CL_LSO_ADMN_COURSE_POWL=======CP
Function: POWL_QUERY_REFRESH of program SAPLPOWL_FUGR
Any idea regarding this.
Thanks

Hi Again
Please check SAP Note No. 1600068. This will help..
Regards

Mobile Administrator in SAP NetWeaver Mobile 7.1

Hi All
I want to log in into the SAP NetWeaver Mobile Administrator in 7.1.
In the help of sap, it says:
You can access the SAP NetWeaver Mobile Administrator through the DOE. To do this, you must log on to the DOE and choose Data Orchestration Engine > Data Orchestration Admin and Monitoring Portal.
But there is no such link in my SAP screen.
What are the various ways to access SAP NetWeaver Mobile Administrator in 7.1?
Waiting for your replies.
Ankur

Hi Ankur,
you can also directly navigate to the mobile administrator using the web browser. The url is as follows:
http://host:port/sap/bc/webdynpro/sap/sdoe_administration?sap-language=EN
Host and port you have to adjust to your settings. These are the same settings you are using during synchronization on a client device.
Regards,
Stefan

Error while opening administrator Editior

Experts!
When I open HANA studio I see the error's below could any one help.
when I place cursor on systems - Local host - system state can't be determined , SAP control request failed : Unexpected end of file from server
I see this error when I open administrator console.
" Error while opening administrator Editor ' reason could not get environment of system 'JFJ' sap_retrieval_path cannot be determined
Thanks,'
Joe

Hi Joe,
This is 'shared' HANA system and by design your HANA DB user doesn't have a lot of privileges.
Best regards,
Emil

TS1424 When attempting to download iTunes I keep getting error The system administrator has set policies to prevent this installation. This is home PC and I am administrator. Any help is appreciated.

When attempting to download iTunes I keep getting error The system administrator has set policies to prevent this installation. This is a home PC and I am the administrator. Any help would be appreciated.

Hi PSpark!
I have an article here that I believe will help you troubleshoot this issue a little further. That article can be found right here:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for coming to the Apple Support Communities!
Regards,
Braden

HT1926 I can't re install iTunes because I get a error saying mobile device could not start.

I can't re-install iTunes because i get an error saying Mobile Device could not start?

Same here TC, very annoying

[LDAP: error code 11 - Administrative Limit Exceeded]

Hi,
I am trying to search LDAP and retrieve a attribute (checksecurity) based on the uid (hardcoded the uid), below is the code :
<invoke name='getResourceObjects' class='com.waveset.ui.FormUtil'>
<invoke name='getLighthouseContext'>
<ref>WF_CONTEXT</ref>
</invoke>
<s>person</s>
<s>Resource_LDAP</s>
<map>
<s>searchScope</s>
<s>ou=people,o=abc.com</s>
<s>searchAttrsToGet</s>
<List>
<String>checksecurity</String>
<String>uid</String>
</List>
<s>conditions</s>
<map>
<s>uid</s>
<s>AE8024T</s>
</map>
</map>
</invoke>
Below is the block trace :
<block name='Test' trace='true'>
<invoke name='getResourceObjects' class='com.waveset.ui.FormUtil'>
<invoke name='getLighthouseContext'>
<ref>WF_CONTEXT</ref> --> com.waveset.workflow.WorkflowEngine@539f0d
</invoke> --> com.waveset.server.InternalSession@17210a5
<s>person</s> --> person
<s>Resource_LDAP</s> --> Resource_LDAP
<map>
<s>searchScope</s> --> searchScope
<s>ou=people,o=abc.com</s> --> ou=people,o=abc.com
<s>searchAttrsToGet</s> --> searchAttrsToGet
<o>[checksecurity, uid]</o> --> [checksecurity, uid]
<s>conditions</s> --> conditions
<map>
<s>uid</s> --> uid
<s>AE8024T</s> --> 210014992
</map> --> {uid=AE8024T}
</map> --> {searchAttrsToGet=[checksecurity, uid], searchScope=ou=people,o=abc.com, conditions={uid=AE8024T}}XPRESS <invoke> exception:com.waveset.util.WavesetException: Can't call method getResourceObjects on class com.waveset.ui.FormUtil
==> com.waveset.util.WavesetException: Error searching for objects
==> javax.naming.LimitExceededException: [LDAP: error code 11 - Administrative Limit Exceeded]
Please let me know if anyone has come across this error.
Thanks & Regards
Arun

Your LDAP server has search limits for the user you're logging in as (or, more likely, it has default limits, and you haven't made exceptions for that user).
If you're using Sun Directory Server, you can remove these limits by setting 'nsLookThroughLimit' and 'nsSizeLimit' both to -1 for that user.

ODSEE 11gR1------LDAP: error code 11 - Administrative Limit Exceeded

Hello,
We are facing some issues browsing the server content when using some accounts.
We've got the error code below:
Caused by: javax.naming.LimitExceededException: [LDAP: error code 11 - Administrative Limit Exceeded]; remaining name 'ou=Users,o=XXX"
We've already tried to solve it using the below posts:
http://docs.oracle.com/cd/E19693-01/819-0995/bcapq/index.html
http://docs.oracle.com/cd/E19424-01/820-4809/gbxdp/index.html
But the problem still occurs.
Do you have any idea how to solve it?
Thank you in advance for your help.

Hello,
These are some logs while using the application and the LDAP server.
06 mai 2013 09:52:55,375 DEBUG rte_log: - LDAP search filter is '(&(objectClass=rteFOCustomers)(cn=*)(displayName=*)(iso6523=*))'
06 mai 2013 09:52:55,375 INFO rte_log: - Recherche de sociétés avec le filtre '(&(objectClass=rteFOCustomers)(cn=*)(displayName=*)(iso6523=*))'
06 mai 2013 09:52:55,491 INFO rte_log: - La recherche de sociétés avec le filtre '(&(objectClass=rteFOCustomers)(cn=*)(displayName=*)(iso6523=*))' a ramené : 925 elements
06 mai 2013 09:53:02,954 ERROR rte_log: etso - [LDAP: error code 11 - Administrative Limit Exceeded]
The account used to browse the server is the directory manager account.
Thank you for your help.

I am trying to sync my iphone and im getting and error "apple mobile device service not started"

I am trying to syn my iphone and im getting an error "apple mobile device service is not started" what do i do?

See if this page helps you restart it, it also has instructions for setting it to start automatically : http://support.apple.com/kb/TS1567

Error in Mobile Administrator

Similar Messages

Maybe you are looking for