ERROR in Module RSQL &include &P9
Hi Experts,
I have an issue with Solman 7.1, when accessing the transaction solman_workcenter the Gui displays :
“ 500 Sap Internal ERROR
ERROR: Error in module RSQL of the Database interface &INCLUDE &P9 (termination RABAX_STATE).”
In the ST22 trans. Displays
Category ABAP Programming Error
Runtime Errors DBIF_RSQL_INVALID_RSQL
Except. CX_SY_OPEN_SQL_DB
ABAP Program CL_POWL_QUERY_ACCESSOR========CP
Application Component CA-GTF-SGF-POW
Date and Time 25.10.2013 12:04:05
Short text
Error in module RSQL of the database interface
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_POWL_QUERY_ACCESSOR========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "GET_VISIBLE_QUERIES" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The SQL statement generated from the SAP Open SQL statement violates a
restriction imposed by the underlying database system of the ABAP
system.
On the ST11
Viewing the dev_w# log, I have this:
A ABAP Program CL_POWL_QUERY_ACCESSOR========CP .
A Source CL_POWL_QUERY_ACCESSOR========CM003 Line 92.
A Error Code DBIF_RSQL_INVALID_RSQL.
A Module $Id: //bas/720_REL/src/krn/runt/absapsql.c#18 $ SAP.
A Function ab_HandleRsqlErrors Line 702.
And on the SM21 trans for the system logs I have this
Details Page 2 Line 26 System Log: Local Analysis of grp-dcs 1
Time Type Nr Clt User TCode Grp N Text
12:04:05 DIA 001 400 SOLMAN_ADMIN AB 0 Run-time error "DBIF_RSQL_INVALID_RSQL" occurred
Run-time error "DBIF_RSQL_INVALID_RSQL" occurred
Details
Recording at local and central time........................ 25.10.2013 12:04:05
Task...... Process User...... Terminal Session TCode Program Cl Problem cl Package 11328 Dialog work process No. 001 SOLMAN_ADMIN 10.1.25. 1 SAPMHTTP T Transaction Problem SABP
I need help with this error, right now I can´t access to my work center, I appreciate it your help and knowledge about this, I’ve looking on service sap without lucky .
Regards.
Hi Roman
Thanks for your reply,
There are attached the log files, in the other hand, I’ve trying implementing Sap notes for powl error without no results, the solman is already configured at system preparation, basic configuration, managed system configuration, technical monitoring, and data volume management.
Here is the sp levels
SAP_BASIS 702 0009 SAPKB70209 SAP Basis Component
SAP_ABA 702 0009 SAPKA70209 Cross-Application Component
CTS_PLUG 200 0001 SAPK-20001INCTSPLUG SAP CTS Plugin
PI_BASIS 702 0009 SAPK-70209INPIBASIS Basis Plug-In
ST-PI 2008_1_700 0008 SAPKITLRD8 SAP Solution Tools Plug-In
GW_CORE 200 0000 - SAP GW CORE 200
SAP_BS_FND 702 0007 SAPK-70207INSAPBSFND SAP Business Suite Foundation
SAP_BW 702 0009 SAPKW70209 SAP Business Warehouse
SAP_AP 700 0026 SAPKNA7026
WEBCUIF 701 0006 SAPK-70106INWEBCUIF SAP Web UI Framework
BBPCRM 701 0006 SAPKU70106 BBPCRM
BI_CONT 706 0002 SAPK-70602INBICONT Business Intelligence Content
CPRXRPM 500_702 0005 SAPK-50005INCPRXRPM SAP Portfolio and Project Management 5.0 (ABAP)
IW_BEP 200 0000 - Backend Event Provider
IW_FND 250 0000 - SAP IW FND 250
ST 710 0004 SAPKITL704 SAP Solution Manager Tool
ST-BCO 710 0002 SAPK-71002INSTBCO ST-BCO 710: Add-On Installation
SOCO 101 0001 SAPK-10101INSOCO SAP Solution Composer Server
ST-A/PI 01Q_700 0001 SAPKITAB7K Servicetools for other App./Netweaver 04
ST-ICO 150_700 0031 SAPK-1507VINSTPL
ST-SER 701_2010_1 0018 SAPKITLOSI SAP Solution Manager Service Tools
I checked all parameters for the ICM, ran again the SPRO options, in fact I configured again the technical system for the solman landscape with no successful
Similar Messages
-
Error in module RSQL of the database interface.
Hi Expert,
I get this error "Error in module RSQL of the database interface." when the below ABAP statement executed, do you know the root cuase? Thanks.
ABAP Code:
data lt_fact type TABLE OF /BIC/FZRT_C002.
data ls_Fact type /BIC/FZRT_C002.
*SELECT * INTO table lt_fact FROM /BIC/FZRT_C002 WHERE KEY_ZRT_C0021 in lt_RSDIMID and KEY_ZRT_C0022 in lt_caRSDIMID*.
Information in ST22.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLZZ_FG" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "ZCA_GET_CUBE_STOCK" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The SQL statement generated from the SAP Open SQL statement violates a
restriction imposed by the underlying database system of the ABAP
system.
Possible error causes:
o The maximum size of an SQL statement was exceeded.
o The statement contains too many input variables.
o The input data requires more space than is available.
o ...
You can generally find details in the system log (SM21) and in the
developer trace of the relevant work process (ST11).
In the case of an error, current restrictions are frequently displayed
in the developer trace.
Best Regards,
Andrewi have the same error but my first select is
SELECT QMNUM QMTXT QMDAT AUFNR OBJNR QMNAM QMART BTPLN IWERK BEBER INGRP EQUNR SERIALNR MATNR
INTO TABLE GT_VIQMEL
FROM VIQMEL
WHERE QMNUM IN S_QMNUM .
please tell me how to solve this error when i run 24000 raw this select dump.
ASAP
thanks
Eman elgammal. -
Error in module RSQL of the datasource inter face
Hi All,
We have installed a fresh BIW server on MSSQL database 2005. We have selected components like as ABAP.JAVA,EP,EP Core ,BI Java. While replicating the datasource using tcode RSA1 from R/3 Retail Server we are getting an error Error in module RSQL of the datasource inter face .
Details of Support package level-:
SAP_ABA 700 0016 SAPKA70016 Cross-Application Component
SAP_BASIS 700 0016 SAPKB70016 SAP Basis Component
PI_BASIS 2006_1_700 0007 SAPKIPYM07 Basis Plug-In (PI_BASIS) 2006_1_700
SAP_BW 700 0018 SAPKW70018 SAP NetWeaver BI 7.0
BI_CONT 703 0008 SAPKIBIIP8 Business Intelligence Content
Please suggest us the solution.
Note: we are not getting any dump in st22. we have already checked the note 1162821
Regards,
DushyantCheck this threads,
Re: PSA have not data
Re: Unable to Activate Source System after Upgrade
That might help
Regards
Juan -
Error in module RSQL of the datasource inter face + RSA1
Hi All,
We have installed a fresh BIW server on MSSQL database 2005. We have selected components like as ABAP.JAVA,EP,EP Core ,BI Java. While replicating the datasource using tcode RSA1 from R/3 Retail Server we are getting an error Error in module RSQL of the datasource inter face .
Details of Support package level-:
SAP_ABA 700 0016 SAPKA70016 Cross-Application Component
SAP_BASIS 700 0016 SAPKB70016 SAP Basis Component
PI_BASIS 2006_1_700 0007 SAPKIPYM07 Basis Plug-In (PI_BASIS) 2006_1_700
SAP_BW 700 0018 SAPKW70018 SAP NetWeaver BI 7.0
BI_CONT 703 0008 SAPKIBIIP8 Business Intelligence Content
Please suggest us the solution.
Note: we are not getting any dump in st22. we have already checked the note 1162821
Regards,
DushyantThanks a lot ,we got the solution.
Regards,
Dushyant -
RFC_ERROR_SYSTEM_FAILURE: Error in module RSQL of the database interface
HI All,
I am trying to execute an RFC through JCO connection and getting the error "RFC_ERROR_SYSTEM_FAILURE: Error in module RSQL of the database interface".
While debugging I have found that the actual cause of dump is a SQL command written in this RFC. The SQL command is
SELECT DISTINCT *
INTO CORRESPONDING FIELDS OF TABLE lt_calcrule_hol
FROM itc_calcrule_hol
FOR ALL ENTRIES IN calc_rule
WHERE rule_id = calc_rule-rule_id
AND start_date <= sy-datum
AND end_date >= sy-datum
AND (lv_ident)
AND ( (lv_orgs)
OR location_type = '' ).
Here the value of lv_ident is ======>> ident IN ('US','B2'.........................)
and value of lv_orgs is =========>> location_type IN ('S1','S2',..............................)
location_type and ident are columns in table itc_calcrule_hol .
I have analysed that if I pass around 700 enteries in the lv_ident and lv_ogs then it is working fine.
But if I have more than 900 enteries in these variables then it dumps.
Can anybody let me know what is the issue with the query here.And what could be the solution.
Thanks and Regards,
ReenaI'd recommend talking to an experienced basis admin or ABAP developer. First of all it would help to look at the short dump in SAP, to see if that gives any useful information. In case of a generic error like DBIF_RSQL_INVALID_RSQL, the developer trace of the work process (dev_w<n>) should contain further information (to get the number of the work process that handled your RFC call check the system log, which contains the reference along with a comment about the dump). So I'd check those first to see what actually caused the problem.
Information on maximum SQL statement length can either be retrieved from the database vendor's documentation or alternatively by searching SAP [OSS notes|https://service.sap.com/notes]. For the latter you need a valid user ID for the SAP service market place. -
Error in module RSQL of the database interface! Please Help.
I am getting the error "Error in module RSQL of the database interface" in my program. Below is the code snippet in which the above error is:
=================================
FORM UPLOAD_PA_PB USING NB_LINE ID.
DATA: TOT_LINES TYPE I.
IF ID <> 'PA' and ID <> 'PB'. "UPG060507 - RY
only PA and PB tables
CHECK ID CP 'PA*'
OR ID CP 'PB*'.
DO NB_LINE TIMES.
READ DATASET DSN INTO IPREL_DB.
IF IPREL_DB+0(3) = P_FROM.
IPREL_DB+0(3) = P_TO.
ENDIF.
RP-CHECK-VALID-PAPB IPREL_DB S_BEGDA-LOW S_BEGDA-HIGH.
IF FLAG = 0. CONTINUE. ENDIF.
APPEND IPREL_DB.
ENDDO.
Begin of change - UPG060507 - RY
DELETE ADJACENT DUPLICATES FROM IPREL_DB.
End of change - UPG060507 - RY
IF TEST = SPACE.
IF ID = 'PA2010' or ID = 'PA0014' or ID = 'PA0015'.
PERFORM CLEAR_COST_ASSIGNMENT. "PUNM0002
ENDIF.
delete previous values
DELETE FROM (ID) WHERE PERNR IN PERS
AND BEGDA <= S_BEGDA-HIGH
AND ENDDA => S_BEGDA-LOW.
WRITE: / SY-DBCNT LEFT-JUSTIFIED, 'entrie(s) deleted from', ID.
insert the new ones
INSERT (ID) FROM TABLE IPREL_DB.
WRITE: / SY-DBCNT LEFT-JUSTIFIED, 'entrie(s) imported in', ID.
CALL FUNCTION 'DB_COMMIT'.
SKIP.
ELSE.
DESCRIBE TABLE IPREL_DB LINES TOT_LINES.
WRITE:/ TOT_LINES LEFT-JUSTIFIED, 'Entries Will Be Imported in',ID.
ENDIF.
REFRESH IPREL_DB.
ENDIF. "UPG060507 - RY
ENDFORM.
===============
Your help will be greatly appreciated and all the answers will be rewarded.
Thanks.
MithunHi Mithun,
Can you please tell at which line the error is shown.
Regards,
Atish -
Dump regarding 'Error in module RSQL 'in dynamic internal table
Here is a Dump regarding 'Error in module RSQL of the database interface'.My program runs fine if 100 rows is getting selected from SAP Table.But for mass selection program is giving Dump. The program has dynamic selection of any SAP Table with dynamic selection ranges.I have attached below snippet code for your understanding and analysis.
Looking forward your kind support.
* Select Data from table using field symbol which points to dynamic table with packet size
SELECT *
INTO CORRESPONDING FIELDS OF TABLE <fs_table_tmp>
FROM (p_table) PACKAGE SIZE p_packet.
INSERT LINES OF <fs_table_tmp> INTO TABLE <fs_table> .
UNASSIGN <fs_table_tmp> .
ENDSELECT.Hello Salmali,
Are you checking in the debugger mode?
Error CX_SY_OPEN_SQL_DB comes when there is any pause between select and endselect.
one more thing use INTO in place of APPENDING.
SELECT (i_field_select)
FROM (p_table)
into CORRESPONDING FIELDS OF TABLE <fs_table_tmp>
PACKAGE SIZE p_packet.
append LINES OF <fs_table_tmp> INTO TABLE <fs_table> .
Refresh <fs_table_tmp> .
ENDSELECT.
Please let me know what is the value of p_packet.
also have you created the table <fs_table_tmp> and <fs_table> of same type . Please check
Thanks,
Gaurav -
URGENT: Errors in module RSQL of the database interface.
hi
i got a error while i was doing data replication from R/3 to SRM.pls send details to my mail id [email protected] as soon as possible.
kind regards to all.error during a RFC CRM_MW while i was doing data replication , might be i forgot anyhow pls mail me solution immediatly.
kind regards to all -
Error saying "Error in the module RSQL accessing the database interface"
Hi,
there is a standard program available for retrieving the assets for the given cost centres on the selection screen.
Our requirement is instead of cost centre we have to retrieve the assets for the given cost centre group.
We have to find all the cost centres available on the given cost centre group and its child nodes.
For all these cost centres we will be retriving the asset history data.
So we copied the standard program into another Y program and made the changes to it.
What's happening is if we give the top most Cose centre group node there are 16000 cost centres available . while retriving the asset history data for all these cost centres an runtime error occurs in a standard program saying
"Error in the module RSQL accessing the database interface, " DBIF_RSQL_INVALID_RSQL ".
The error occurs while executing the statement Fetch Next cursor in a standard Include program.
<b>This happens only if we give huge range of data. If we give small range of data it
works fine</b>.
Can anyone help me in this by saying why it occurs and what will be the solution for this.
Thanks.Hi camila,
The huge range is part of the query string passed to the database.
While an MP3 music gadget easily stores a gigabyte of data, ORACLE was able to increase the maxium size of a query string from 16 k to 32 k bytes in the last 5 years.
<b>Unbelievable but true!</b>
Just multiply the number of entries in the range with the field length and see where go go...
Regards,
Clemens -
Error in the module RSQL accessing the database interface
I have written the following query.
SELECT a~no
a~hist_no
a~chk_stat
a~chk_date
a~user as chk_user
b~name as chk_by
into corresponding fields of table hist
from zhist as a INNER JOIN zuser as b on
auser = bbname
where pspnr = v_pspnr
and chk_no = v_chk_no.
I am getting the dump "Error in the module RSQL accessing the database interface".
Please provide me the solution.
Thanx,
Selva.Hi,
As i have analysed your query in that you are putting the data in the internal table 'hist' which is also a standard structure and if you check in SE11 'hist' is the standard structure for 'Tablespace History' and might be because of that it is causing the problem.
Kindly check by changing the name of the internal table to tt_hist and then try.
I think that will solve the problem.
Regards,
Harsh Goel -
DBIF_RSQL_INVALID_RSQL " Error in the module RSQL accessing the database i
TYPES: BEGIN OF lty_bkpf,
xblnr LIKE bkpf-xblnr,
END OF lty_bkpf.
DATA: li_bkpf TYPE STANDARD TABLE OF lty_bkpf
WITH HEADER LINE.
RANGES: lr_xblnr FOR bkpf-xblnr,
lr_xblnr1 FOR bkpf-xblnr,
s_bukrs FOR bseg-bukrs.
IF NOT lr_xblnr1[] IS INITIAL.
SELECT xblnr
FROM bkpf
APPENDING CORRESPONDING FIELDS OF TABLE li_bkpf
WHERE bukrs IN s_bukrs
AND bstat = ''
AND xblnr IN lr_xblnr1
AND blart EQ 'SA'.
ENDIF.
s_bukrs has a single value .
lr_xblnr1 has 3000 entries and also with wild characters. ( I CP 4903813253* ) .
the SELECT statement is going into dump with the message : DBIF_RSQL_INVALID_RSQL
" Error in the module RSQL accessing the database interface."
please suggest me alternate code to encounter this issue .
thanks,
Raghu VModerator message - Please search before asking - post locked
Rob -
ERROR: p2v module S40_setup_preload failed: 0
Hi,
I get "ERROR: p2v module S40_setup_preload failed: 0" during installation of Solaris 8 zone. However, system seems to be running. After zlogin, /var/adm/utmpx was missing.
[NOTICE: Zone rebooting]
SunOS Release 5.8 Version Generic_Virtual 64-bit
Copyright 1983-2000 Sun Microsystems, Inc. All rights reserved
Hostname: dgnws02
INIT: Cannot create /var/adm/utmpx
INIT: failed write of utmpx entry:" "
INIT: failed write of utmpx entry:" "
INIT: SINGLE USER MODE
Type control-d to proceed with normal startup,
(or give root password for system maintenance):
Appreciate any suggestions on the possible cause of the problem. Thanks!
# more s8-zone.install.826.log
[Wednesday, February 17, 2010 11:54:33 AM SGT] Log File: /var/tmp/s8-zone.install.826.log
[Wednesday, February 17, 2010 11:54:33 AM SGT] Product: Solaris 8 Containers 1.0
[Wednesday, February 17, 2010 11:54:33 AM SGT] Installer: solaris8 brand installer 1.2
[Wednesday, February 17, 2010 11:54:33 AM SGT] Zone: s8-zone
[Wednesday, February 17, 2010 11:54:33 AM SGT] Path: /export/home/s8-zone
[Wednesday, February 17, 2010 11:54:33 AM SGT] Starting pre-installation tasks.
[Wednesday, February 17, 2010 11:54:33 AM SGT] Installation started for zone "s8-zone"
[Wednesday, February 17, 2010 11:54:33 AM SGT] Source: /export/home/ssc/s8-system.flar
[Wednesday, February 17, 2010 11:54:33 AM SGT] Media Type: flash archive
[Wednesday, February 17, 2010 11:54:34 AM SGT] Installing: This may take several minutes...
[Wednesday, February 17, 2010 11:54:34 AM SGT] cd /export/home/s8-zone/root &&
[Wednesday, February 17, 2010 11:54:34 AM SGT] do_flar < "
[Wednesday, February 17, 2010 11:59:47 AM SGT] Postprocessing: This may take several minutes...
[Wednesday, February 17, 2010 11:59:47 AM SGT] running: p2v -v -u s8-zone
[Wednesday, February 17, 2010 11:59:47 AM SGT] Postprocess: Gathering information about zone s8-zone
[Wednesday, February 17, 2010 11:59:48 AM SGT] Postprocess: Creating mount points
[Wednesday, February 17, 2010 11:59:48 AM SGT] Postprocess: Processing /etc/system
[Wednesday, February 17, 2010 11:59:48 AM SGT] Postprocess: Booting zone to single user mode
[Wednesday, February 17, 2010 12:00:06 PM SGT] Postprocess: Applying p2v module S20_apply_patches
[Wed Feb 17 12:00:06 SGT 2010] S20_apply_patches: Unpacking patch: 109147-44
[Wed Feb 17 12:00:07 SGT 2010] S20_apply_patches: Installing patch: 109147-44
Checking installed patches...
One or more patch packages included in
109147-44 are not installed on this system.
Patchadd is terminating.
[Wed Feb 17 12:00:10 SGT 2010] S20_apply_patches: Unpacking patch: 111023-03
[Wed Feb 17 12:00:10 SGT 2010] S20_apply_patches: Installing patch: 111023-03
Checking installed patches...
One or more patch packages included in
111023-03 are not installed on this system.
Patchadd is terminating.
[Wed Feb 17 12:00:11 SGT 2010] S20_apply_patches: Unpacking patch: 111431-01
[Wed Feb 17 12:00:11 SGT 2010] S20_apply_patches: Installing patch: 111431-01
Checking installed patches...
One or more patch packages included in
111431-01 are not installed on this system.
Patchadd is terminating.
[Wed Feb 17 12:00:13 SGT 2010] S20_apply_patches: Unpacking patch: 112605-04
[Wed Feb 17 12:00:13 SGT 2010] S20_apply_patches: Installing patch: 112605-04
Checking installed patches...
One or more patch packages included in
112605-04 are not installed on this system.
Patchadd is terminating.
[Wed Feb 17 12:00:14 SGT 2010] S20_apply_patches: Unpacking patch: 112050-04
[Wed Feb 17 12:00:14 SGT 2010] S20_apply_patches: Installing patch: 112050-04
Checking installed patches...
One or more patch packages included in
112050-04 are not installed on this system.
Patchadd is terminating.
[Wed Feb 17 12:00:15 SGT 2010] S20_apply_patches: Unpacking patch: 109221-01
[Wed Feb 17 12:00:16 SGT 2010] S20_apply_patches: Installing patch: 109221-01
Checking installed patches...
One or more patch packages included in
109221-01 are not installed on this system.
Patchadd is terminating.
[Wednesday, February 17, 2010 12:00:16 PM SGT] Postprocess: Applying p2v module S31_fix_net
[Wednesday, February 17, 2010 12:00:17 PM SGT] Postprocess: Applying p2v module S32_fix_nfs
[Wednesday, February 17, 2010 12:00:17 PM SGT] Postprocess: Applying p2v module S33_fix_vfstab
[Wednesday, February 17, 2010 12:00:17 PM SGT] Postprocess: Applying p2v module S34_fix_inittab
[Wednesday, February 17, 2010 12:00:17 PM SGT] Postprocess: Applying p2v module S35_fix_crontab
nawk: can't open file /var/spool/cron/crontabs/root
source line number 18
[Wednesday, February 17, 2010 12:00:17 PM SGT] Postprocess: Applying p2v module S36_fix_pam_conf
[Wednesday, February 17, 2010 12:00:18 PM SGT] Postprocess: Applying p2v module S40_setup_preload
crle: illegal option -- E
usage: crle [-64] [-a name ] [-c conf] [-f flags] [-i name] [-I name ]
[-g name] [-G name] [-l dir] [-o dir ] [-s dir] [-t ELF|AOUT] [-u] [-v]
[Wednesday, February 17, 2010 12:00:18 PM SGT] Postprocess: ERROR: p2v module S40_setup_preload failed: 0
[Wednesday, February 17, 2010 12:00:18 PM SGT] Postprocess: ERROR: Postprocessing failed.
[Wednesday, February 17, 2010 12:00:18 PM SGT] Result: Postprocessing failed.
[Wednesday, February 17, 2010 12:00:18 PM SGT]
[Wednesday, February 17, 2010 12:00:18 PM SGT] Result: *** Installation FAILED ***
[Wednesday, February 17, 2010 12:00:18 PM SGT] Log File: /var/tmp/s8-zone.install.826.logThank-you very much! Michael!
I have checked the crle binary, and the details are as follows. Is there a Solaris 10 patch that I am missing?
I have installed Solaris 10 Recommended patch cluster dated December 2009. The patches installed are listed below.
Really appreciate your help!
# find . -name crle
# pwd
/usr/lib
# cd /
# find . -name crle
./usr/bin/crle
./export/home/10_Recommended/patches/120011-14/SUNWcsu/reloc/usr/bin/crle
./export/home/10_Recommended/patches/139555-08/SUNWcsu/reloc/usr/bin/crle
./export/home/10_Recommended/patches/118833-36/SUNWcsu/reloc/usr/bin/crle
./export/home/10_Recommended/patches/141444-09/SUNWcsu/reloc/usr/bin/crle
./export/home/10_Recommended/patches/127127-11/SUNWcsu/reloc/usr/bin/crle
./export/home/127127-11/SUNWcsu/reloc/usr/bin/crle
./export/home/s8-zone/root/usr/bin/crle
./export/home/s8-zone/root/.SUNWnative/usr/bin/crle
# echo $PATH
/usr/sbin:/usr/bin
# cd /usr/bin
# ls -l crle
-r-xr-xr-x 1 root bin 44612 Sep 16 04:20 crle -
Adobe reader error - Faulty module: Comctl32.dll
Adobe reader error - Faulty module: Comctl32.dll
Running Windows 7 Home Premium, SP 1.
Computer is ACER Aspire -4830TG laptop, with 8GB RAM, i5-2430M intel processor.
Not sure when this happened, but am unable to open Adobe Reader 10. Error indicates the fault module to be Comctl32.dll, specifically,
C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_n one_41e6975e2bd6f2b2\Comctl32.dll
Size is 619KB
Reader will initialize, but blank out and freeze as soon as it attempts to do anything, including displaying a menu bar. I have reinstalled Reader several times and have removed it first. It appears that the issue is really the Comctl32.dll file. There are so many versions on my system can't figure out how to tell if it is corrupt.
Virus scan shows no risks.
Unable to rollback far enough to make a difference.
Anyone else have a problem like this?Hey, Pat,
Sorry for the late response. Had family visiting and didn't get back to the computer until now. The event log entry follows:
Log Name: Application
Source: Application Error
Date: 8/16/2012 7:31:28 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: June-PC
Description:
Faulting application name: AcroRd32.exe, version: 10.1.3.23,
time stamp: 0x4f7bc349
Faulting module name: Comctl32.dll, version:
6.10.7601.17514, time stamp: 0x4ce7b71c
Exception code: 0xc0000005
Fault offset: 0x000579c9
Faulting process id: 0x1924
Faulting application start time: 0x01cd7baafa878e61
Faulting application path: C:\Program Files
(x86)\Adobe\Reader 10.0\Reader\AcroRd32.exe
Faulting module path:
C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_no ne_41e6975e2bd6f2b2\Comctl32.dll
Report Id: 4cedcaaa-e79e-11e1-8f8d-dc0ea104673d
Steve Williamson -
Why alert casting error when module url changed?
Hi, everyone.
I occurred a stranger error when click the item in DataGrid
which is redirected by "ModuleLoader" url.
Error #1034: Cast Error:Cannot cast
mx.managers::DragManagerImpl@482f971 to
mx.managers.IDragManager。
at mx.managers::DragManager$/get
impl()[E:\dev\3.0.x\frameworks\projects\framework\src\mx\managers\DragManager.as:152]
at mx.managers::DragManager$/get
isDragging()[E:\dev\3.0.x\frameworks\projects\framework\src\mx\managers\DragManager.as:18 7]
at
mx.controls.listClasses::ListBase/dragScroll()[E:\dev\3.0.x\frameworks\projects\framework \src\mx\controls\listClasses\ListBase.as:7148]
at Function/
http://adobe.com/AS3/2006/builtin::apply()
at <anonymous>()
at SetIntervalTimer/onTimer()
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()
Actually I never modify about DragManagerImpl...
In my main.mxml there is a
<mx:ModuleLoader id="module"
url="modules/DeviceRegisterSelectWizardModule.swf"/>
this ModuleLoader control is to load a new swf module when
change the url.
Althought the first loaded module which included DataGrid is
OK, it popup the error when this module is the second time switched
by the url...
The error is the above when click the item in it.
Actually all cast operation is error as I tried:
And is there any solution for it? ModuleLoader has such a
bug?
Thank you very much.Hi,
Another way to "find" the URL for the oamconsole, that I use if I'm not familiar with the configuration I'm working on is to first log into the Adminserver WL Console, then go to "Deployments".
Then, find "oamconsole" in the Deployments listed (on the right).
Click on that, then on the next page, look for the "Testing" tab. Click on the "Testing" tab, which which show the /oamconsole app.
Click on the "+" to expand the tree, and you should see a bunch of different URLs on the right, e.g., if you have OAM console deployed to managed servers, etc., there'll be different URLs for those, etc., and you can just click on the links to open up OAM Console in your browser.
Jim -
Unable to create rule Error:Function Module does not meet the workflow conv
Hi Workflow experts,
Could any one help me with rule creation. Below is my Function Module Interface.
""Local Interface:
*" TABLES
*" AC_CONTAINER STRUCTURE SWCONT OPTIONAL
*" ACTOR_TAB STRUCTURE SWHACTOR OPTIONAL
*" EXCEPTIONS
*" NOBODY_FOUND
The function module test is successful with all required conventions for workflow but while i try to create a rule with the funtion module i get the error "Function Module does not meet the workflow conventions"
I Also have included the following in FM
INCLUDE <cntn01>.
Any suggestions would be helpful. Thanks in Advance,
ImranHi,
I am not sure whether the rule accepts the optional flag. Remove the optional flag for the tables parameters and try again. According to the documentation you have implemented the right interface. It might be the issue with the tables parameter being optional.
Hope this helps,
Sudhi
Maybe you are looking for
-
I want to cancel an itunes gift card
-
Returning to AirPlay on a apple Tv after viewing a movie
I use AirPlay to listen to music in my home. I have 5 AirPlay device connected including my Apple Tv. When I play a movie from my Apple Tv, it stop the music on it, witch is normal, so I can look my movie. When the movie is finish, I want to listen t
-
Installing BOE xi 3.1 sp3 on QA
hi everyone, we are having everything setup for dev environment.Right now we need to install boe on QA. My question is: Do i need to have the permissions in CMS repository(oracle database) to create the cms tables to install QA BOE or can i move the
-
Hi, congratulation for Nokia Ovi Suite.. It's really a wonderful software. I was using Nokia PC Suite for my Nokia 3230, but just today I thought to try out Nokia Ovi Suite. And I believe it's wonderful... I just have one thing: Nokia PC Suite includ
-
I just downloaded the new Firefox 4, rebooted, and viewed your videos re the new look and new features. Problem is, my toolbars look no different than before. The new icons you talk about do not appear on my screen. Please advise. Thank you.