Error in module RSQL of the datasource inter face + RSA1
Hi All,
We have installed a fresh BIW server on MSSQL database 2005. We have selected components like as ABAP.JAVA,EP,EP Core ,BI Java. While replicating the datasource using tcode RSA1 from R/3 Retail Server we are getting an error Error in module RSQL of the datasource inter face .
Details of Support package level-:
SAP_ABA 700 0016 SAPKA70016 Cross-Application Component
SAP_BASIS 700 0016 SAPKB70016 SAP Basis Component
PI_BASIS 2006_1_700 0007 SAPKIPYM07 Basis Plug-In (PI_BASIS) 2006_1_700
SAP_BW 700 0018 SAPKW70018 SAP NetWeaver BI 7.0
BI_CONT 703 0008 SAPKIBIIP8 Business Intelligence Content
Please suggest us the solution.
Note: we are not getting any dump in st22. we have already checked the note 1162821
Regards,
Dushyant
Thanks a lot ,we got the solution.
Regards,
Dushyant
Similar Messages
-
Error in module RSQL of the datasource inter face
Hi All,
We have installed a fresh BIW server on MSSQL database 2005. We have selected components like as ABAP.JAVA,EP,EP Core ,BI Java. While replicating the datasource using tcode RSA1 from R/3 Retail Server we are getting an error Error in module RSQL of the datasource inter face .
Details of Support package level-:
SAP_ABA 700 0016 SAPKA70016 Cross-Application Component
SAP_BASIS 700 0016 SAPKB70016 SAP Basis Component
PI_BASIS 2006_1_700 0007 SAPKIPYM07 Basis Plug-In (PI_BASIS) 2006_1_700
SAP_BW 700 0018 SAPKW70018 SAP NetWeaver BI 7.0
BI_CONT 703 0008 SAPKIBIIP8 Business Intelligence Content
Please suggest us the solution.
Note: we are not getting any dump in st22. we have already checked the note 1162821
Regards,
DushyantCheck this threads,
Re: PSA have not data
Re: Unable to Activate Source System after Upgrade
That might help
Regards
Juan -
Error in module RSQL of the database interface.
Hi Expert,
I get this error "Error in module RSQL of the database interface." when the below ABAP statement executed, do you know the root cuase? Thanks.
ABAP Code:
data lt_fact type TABLE OF /BIC/FZRT_C002.
data ls_Fact type /BIC/FZRT_C002.
*SELECT * INTO table lt_fact FROM /BIC/FZRT_C002 WHERE KEY_ZRT_C0021 in lt_RSDIMID and KEY_ZRT_C0022 in lt_caRSDIMID*.
Information in ST22.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLZZ_FG" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "ZCA_GET_CUBE_STOCK" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The SQL statement generated from the SAP Open SQL statement violates a
restriction imposed by the underlying database system of the ABAP
system.
Possible error causes:
o The maximum size of an SQL statement was exceeded.
o The statement contains too many input variables.
o The input data requires more space than is available.
o ...
You can generally find details in the system log (SM21) and in the
developer trace of the relevant work process (ST11).
In the case of an error, current restrictions are frequently displayed
in the developer trace.
Best Regards,
Andrewi have the same error but my first select is
SELECT QMNUM QMTXT QMDAT AUFNR OBJNR QMNAM QMART BTPLN IWERK BEBER INGRP EQUNR SERIALNR MATNR
INTO TABLE GT_VIQMEL
FROM VIQMEL
WHERE QMNUM IN S_QMNUM .
please tell me how to solve this error when i run 24000 raw this select dump.
ASAP
thanks
Eman elgammal. -
RFC_ERROR_SYSTEM_FAILURE: Error in module RSQL of the database interface
HI All,
I am trying to execute an RFC through JCO connection and getting the error "RFC_ERROR_SYSTEM_FAILURE: Error in module RSQL of the database interface".
While debugging I have found that the actual cause of dump is a SQL command written in this RFC. The SQL command is
SELECT DISTINCT *
INTO CORRESPONDING FIELDS OF TABLE lt_calcrule_hol
FROM itc_calcrule_hol
FOR ALL ENTRIES IN calc_rule
WHERE rule_id = calc_rule-rule_id
AND start_date <= sy-datum
AND end_date >= sy-datum
AND (lv_ident)
AND ( (lv_orgs)
OR location_type = '' ).
Here the value of lv_ident is ======>> ident IN ('US','B2'.........................)
and value of lv_orgs is =========>> location_type IN ('S1','S2',..............................)
location_type and ident are columns in table itc_calcrule_hol .
I have analysed that if I pass around 700 enteries in the lv_ident and lv_ogs then it is working fine.
But if I have more than 900 enteries in these variables then it dumps.
Can anybody let me know what is the issue with the query here.And what could be the solution.
Thanks and Regards,
ReenaI'd recommend talking to an experienced basis admin or ABAP developer. First of all it would help to look at the short dump in SAP, to see if that gives any useful information. In case of a generic error like DBIF_RSQL_INVALID_RSQL, the developer trace of the work process (dev_w<n>) should contain further information (to get the number of the work process that handled your RFC call check the system log, which contains the reference along with a comment about the dump). So I'd check those first to see what actually caused the problem.
Information on maximum SQL statement length can either be retrieved from the database vendor's documentation or alternatively by searching SAP [OSS notes|https://service.sap.com/notes]. For the latter you need a valid user ID for the SAP service market place. -
Error in module RSQL of the database interface! Please Help.
I am getting the error "Error in module RSQL of the database interface" in my program. Below is the code snippet in which the above error is:
=================================
FORM UPLOAD_PA_PB USING NB_LINE ID.
DATA: TOT_LINES TYPE I.
IF ID <> 'PA' and ID <> 'PB'. "UPG060507 - RY
only PA and PB tables
CHECK ID CP 'PA*'
OR ID CP 'PB*'.
DO NB_LINE TIMES.
READ DATASET DSN INTO IPREL_DB.
IF IPREL_DB+0(3) = P_FROM.
IPREL_DB+0(3) = P_TO.
ENDIF.
RP-CHECK-VALID-PAPB IPREL_DB S_BEGDA-LOW S_BEGDA-HIGH.
IF FLAG = 0. CONTINUE. ENDIF.
APPEND IPREL_DB.
ENDDO.
Begin of change - UPG060507 - RY
DELETE ADJACENT DUPLICATES FROM IPREL_DB.
End of change - UPG060507 - RY
IF TEST = SPACE.
IF ID = 'PA2010' or ID = 'PA0014' or ID = 'PA0015'.
PERFORM CLEAR_COST_ASSIGNMENT. "PUNM0002
ENDIF.
delete previous values
DELETE FROM (ID) WHERE PERNR IN PERS
AND BEGDA <= S_BEGDA-HIGH
AND ENDDA => S_BEGDA-LOW.
WRITE: / SY-DBCNT LEFT-JUSTIFIED, 'entrie(s) deleted from', ID.
insert the new ones
INSERT (ID) FROM TABLE IPREL_DB.
WRITE: / SY-DBCNT LEFT-JUSTIFIED, 'entrie(s) imported in', ID.
CALL FUNCTION 'DB_COMMIT'.
SKIP.
ELSE.
DESCRIBE TABLE IPREL_DB LINES TOT_LINES.
WRITE:/ TOT_LINES LEFT-JUSTIFIED, 'Entries Will Be Imported in',ID.
ENDIF.
REFRESH IPREL_DB.
ENDIF. "UPG060507 - RY
ENDFORM.
===============
Your help will be greatly appreciated and all the answers will be rewarded.
Thanks.
MithunHi Mithun,
Can you please tell at which line the error is shown.
Regards,
Atish -
URGENT: Errors in module RSQL of the database interface.
hi
i got a error while i was doing data replication from R/3 to SRM.pls send details to my mail id [email protected] as soon as possible.
kind regards to all.error during a RFC CRM_MW while i was doing data replication , might be i forgot anyhow pls mail me solution immediatly.
kind regards to all -
ERROR in Module RSQL &include &P9
Hi Experts,
I have an issue with Solman 7.1, when accessing the transaction solman_workcenter the Gui displays :
“ 500 Sap Internal ERROR
ERROR: Error in module RSQL of the Database interface &INCLUDE &P9 (termination RABAX_STATE).”
In the ST22 trans. Displays
Category ABAP Programming Error
Runtime Errors DBIF_RSQL_INVALID_RSQL
Except. CX_SY_OPEN_SQL_DB
ABAP Program CL_POWL_QUERY_ACCESSOR========CP
Application Component CA-GTF-SGF-POW
Date and Time 25.10.2013 12:04:05
Short text
Error in module RSQL of the database interface
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_POWL_QUERY_ACCESSOR========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "GET_VISIBLE_QUERIES" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The SQL statement generated from the SAP Open SQL statement violates a
restriction imposed by the underlying database system of the ABAP
system.
On the ST11
Viewing the dev_w# log, I have this:
A ABAP Program CL_POWL_QUERY_ACCESSOR========CP .
A Source CL_POWL_QUERY_ACCESSOR========CM003 Line 92.
A Error Code DBIF_RSQL_INVALID_RSQL.
A Module $Id: //bas/720_REL/src/krn/runt/absapsql.c#18 $ SAP.
A Function ab_HandleRsqlErrors Line 702.
And on the SM21 trans for the system logs I have this
Details Page 2 Line 26 System Log: Local Analysis of grp-dcs 1
Time Type Nr Clt User TCode Grp N Text
12:04:05 DIA 001 400 SOLMAN_ADMIN AB 0 Run-time error "DBIF_RSQL_INVALID_RSQL" occurred
Run-time error "DBIF_RSQL_INVALID_RSQL" occurred
Details
Recording at local and central time........................ 25.10.2013 12:04:05
Task...... Process User...... Terminal Session TCode Program Cl Problem cl Package 11328 Dialog work process No. 001 SOLMAN_ADMIN 10.1.25. 1 SAPMHTTP T Transaction Problem SABP
I need help with this error, right now I can´t access to my work center, I appreciate it your help and knowledge about this, I’ve looking on service sap without lucky .
Regards.Hi Roman
Thanks for your reply,
There are attached the log files, in the other hand, I’ve trying implementing Sap notes for powl error without no results, the solman is already configured at system preparation, basic configuration, managed system configuration, technical monitoring, and data volume management.
Here is the sp levels
SAP_BASIS 702 0009 SAPKB70209 SAP Basis Component
SAP_ABA 702 0009 SAPKA70209 Cross-Application Component
CTS_PLUG 200 0001 SAPK-20001INCTSPLUG SAP CTS Plugin
PI_BASIS 702 0009 SAPK-70209INPIBASIS Basis Plug-In
ST-PI 2008_1_700 0008 SAPKITLRD8 SAP Solution Tools Plug-In
GW_CORE 200 0000 - SAP GW CORE 200
SAP_BS_FND 702 0007 SAPK-70207INSAPBSFND SAP Business Suite Foundation
SAP_BW 702 0009 SAPKW70209 SAP Business Warehouse
SAP_AP 700 0026 SAPKNA7026
WEBCUIF 701 0006 SAPK-70106INWEBCUIF SAP Web UI Framework
BBPCRM 701 0006 SAPKU70106 BBPCRM
BI_CONT 706 0002 SAPK-70602INBICONT Business Intelligence Content
CPRXRPM 500_702 0005 SAPK-50005INCPRXRPM SAP Portfolio and Project Management 5.0 (ABAP)
IW_BEP 200 0000 - Backend Event Provider
IW_FND 250 0000 - SAP IW FND 250
ST 710 0004 SAPKITL704 SAP Solution Manager Tool
ST-BCO 710 0002 SAPK-71002INSTBCO ST-BCO 710: Add-On Installation
SOCO 101 0001 SAPK-10101INSOCO SAP Solution Composer Server
ST-A/PI 01Q_700 0001 SAPKITAB7K Servicetools for other App./Netweaver 04
ST-ICO 150_700 0031 SAPK-1507VINSTPL
ST-SER 701_2010_1 0018 SAPKITLOSI SAP Solution Manager Service Tools
I checked all parameters for the ICM, ran again the SPRO options, in fact I configured again the technical system for the solman landscape with no successful -
Dump regarding 'Error in module RSQL 'in dynamic internal table
Here is a Dump regarding 'Error in module RSQL of the database interface'.My program runs fine if 100 rows is getting selected from SAP Table.But for mass selection program is giving Dump. The program has dynamic selection of any SAP Table with dynamic selection ranges.I have attached below snippet code for your understanding and analysis.
Looking forward your kind support.
* Select Data from table using field symbol which points to dynamic table with packet size
SELECT *
INTO CORRESPONDING FIELDS OF TABLE <fs_table_tmp>
FROM (p_table) PACKAGE SIZE p_packet.
INSERT LINES OF <fs_table_tmp> INTO TABLE <fs_table> .
UNASSIGN <fs_table_tmp> .
ENDSELECT.Hello Salmali,
Are you checking in the debugger mode?
Error CX_SY_OPEN_SQL_DB comes when there is any pause between select and endselect.
one more thing use INTO in place of APPENDING.
SELECT (i_field_select)
FROM (p_table)
into CORRESPONDING FIELDS OF TABLE <fs_table_tmp>
PACKAGE SIZE p_packet.
append LINES OF <fs_table_tmp> INTO TABLE <fs_table> .
Refresh <fs_table_tmp> .
ENDSELECT.
Please let me know what is the value of p_packet.
also have you created the table <fs_table_tmp> and <fs_table> of same type . Please check
Thanks,
Gaurav -
Error in the module RSQL accessing the database interface
I have written the following query.
SELECT a~no
a~hist_no
a~chk_stat
a~chk_date
a~user as chk_user
b~name as chk_by
into corresponding fields of table hist
from zhist as a INNER JOIN zuser as b on
auser = bbname
where pspnr = v_pspnr
and chk_no = v_chk_no.
I am getting the dump "Error in the module RSQL accessing the database interface".
Please provide me the solution.
Thanx,
Selva.Hi,
As i have analysed your query in that you are putting the data in the internal table 'hist' which is also a standard structure and if you check in SE11 'hist' is the standard structure for 'Tablespace History' and might be because of that it is causing the problem.
Kindly check by changing the name of the internal table to tt_hist and then try.
I think that will solve the problem.
Regards,
Harsh Goel -
Error saying "Error in the module RSQL accessing the database interface"
Hi,
there is a standard program available for retrieving the assets for the given cost centres on the selection screen.
Our requirement is instead of cost centre we have to retrieve the assets for the given cost centre group.
We have to find all the cost centres available on the given cost centre group and its child nodes.
For all these cost centres we will be retriving the asset history data.
So we copied the standard program into another Y program and made the changes to it.
What's happening is if we give the top most Cose centre group node there are 16000 cost centres available . while retriving the asset history data for all these cost centres an runtime error occurs in a standard program saying
"Error in the module RSQL accessing the database interface, " DBIF_RSQL_INVALID_RSQL ".
The error occurs while executing the statement Fetch Next cursor in a standard Include program.
<b>This happens only if we give huge range of data. If we give small range of data it
works fine</b>.
Can anyone help me in this by saying why it occurs and what will be the solution for this.
Thanks.Hi camila,
The huge range is part of the query string passed to the database.
While an MP3 music gadget easily stores a gigabyte of data, ORACLE was able to increase the maxium size of a query string from 16 k to 32 k bytes in the last 5 years.
<b>Unbelievable but true!</b>
Just multiply the number of entries in the range with the field length and see where go go...
Regards,
Clemens -
DBIF_RSQL_INVALID_RSQL " Error in the module RSQL accessing the database i
TYPES: BEGIN OF lty_bkpf,
xblnr LIKE bkpf-xblnr,
END OF lty_bkpf.
DATA: li_bkpf TYPE STANDARD TABLE OF lty_bkpf
WITH HEADER LINE.
RANGES: lr_xblnr FOR bkpf-xblnr,
lr_xblnr1 FOR bkpf-xblnr,
s_bukrs FOR bseg-bukrs.
IF NOT lr_xblnr1[] IS INITIAL.
SELECT xblnr
FROM bkpf
APPENDING CORRESPONDING FIELDS OF TABLE li_bkpf
WHERE bukrs IN s_bukrs
AND bstat = ''
AND xblnr IN lr_xblnr1
AND blart EQ 'SA'.
ENDIF.
s_bukrs has a single value .
lr_xblnr1 has 3000 entries and also with wild characters. ( I CP 4903813253* ) .
the SELECT statement is going into dump with the message : DBIF_RSQL_INVALID_RSQL
" Error in the module RSQL accessing the database interface."
please suggest me alternate code to encounter this issue .
thanks,
Raghu VModerator message - Please search before asking - post locked
Rob -
Upload Error, How do you identify the datasource in BI & ECC?
Hi BI Experts,
Hope you can help me on this.
We are using BI content to extract & model the data in BI. For the asset accounting infoarea, we had an unusual dataload. It should update around 10,000 records every day. In this instance there was 500,000 records & eventually the load failed when updating the cube.
I want to investigate why there were so many records. I hoped to check the datasource & check also ECC. But unfortunately I have no experience in data extraction, so I am not clear where to start.
Have you any suggestions on an approach to finding out why there were so many records?
Thanks very much
MichelleThanks very much for your repsonse Francisco,
When I choose RSA3 I am faced with settings screen which has automatically populated as follows;
Request ID - TEST
Data Records/Calls 10
Display Extr. Calls 10
Update Mode F
Execution Mode,
Debug not ticked
Auth Trace not ticked
In the Selection Table below, I wish to choose just Period 6, 2011. As this is the restriction on the infopackage.
I have tried to run this with various entries but it doesn't seem to return data, what should I enter in these selections please,
Thanks Francisco,
Michelle -
Error "Output module failed. The file may be damaged or corrupted (-1610153464)"
Hi all.
I using After Effect CS5.5, but i didn't render some projects. Error:
And
Render Best Setting AVI or Quicktime (with OpenGL or without OpenGL).
I try to unstall and reinstall AE, Quicktime but it don't success.
Note: Render with ffdshow is normal.
Some project don't appear error.Code Packs:
-
Error Transporting PI (XI) Web Service Datasource from BI BW 7.0
Hi all,
I have a PI (XI) datasource in development.
While transporting this datasource from Dev ==> QA, the transport keeps failing.
If the datasource is active (BI 7.0), it should be transported to QA without any dependency with other objects?
PI (XI) source system has been setup in QA.
Any ideas? Following is the error I get.
Error generating Web service /BIC/CQZHRCM_T00005000
Error when activating Datasource ZHRCM_TD_MELLONPENSION_INTF Q06CLNT100
The DataSource ZHRCM_TD_MELLONPENSION_INTF(Q06CLNT100) does not exist in object version A
Thanks
Edited by: Rajen SAP BI on Aug 30, 2008 12:44 AMHello Natty,
1. yes the test passed. http://picasaweb.google.de/lh/photo/kcDy5FofEl9VT4jw2m6FZQ?feat=directlink
2. Yes, I try to access a regular oracle DB via JDBC.
3. The Error occurs when I'select the Datasource and entered a table name and then click the search button. http://picasaweb.google.de/lh/photo/iYPCjcdqIclUet1cNj-LNQ?feat=directlink
Thx for Help
Sebastian -
Changing the Datasource of example CMP from Weblogic
I got an error message while running a successfully (?) deployed
Weblogic example bea\weblogic700\samples\server\src\examples\ejb20\basic\containerManaged.
The error message is like this when I run the "ant run":
run:
[java]
[java] Beginning containerManaged.Client...
[java]
[java] The client was unable to lookup the EJBHome. Please make
sure that you have deployed the ejb with the JNDI name
ejb20-containerManaged-AccountHome
on the WebLogic server at t3://localhost:7001
[java] Unable to look up the beans home: Unable to resolve
'ejb20-containerManaged-AccountHome' Resolved: ''
Unresolved:'ejb20-containerManaged-AccountHome
BUILD FAILED
D:\bea\weblogic700\samples\server\src\examples\ejb20\basic\containerManaged\build.xml:121:
Java returned: 1
The ConnectionPool and DataSource have been set through the Weblogic
Console.
Such that
Name: MySQLConnectionPool
URL: jdbc:mysql://localhost:3306/MyDatabase
Driver: Classname com.mysql.jdbc.Driver
Properties: user=sa
password=
Name: MySQLTxDataSource
JNDI Name: MySQLTxDataSource
Pool Name: MySQLConnectionPool
Then I modified the weblogic-cmp-rdbms-jar.xml, such that
<!-- the following line actually should be the JNDI name -->
<!-- data-source-name>examples-dataSource-demoPool</data-source-name
-->
<data-source-name>MySQLTxDataSource</data-source-name>
Then I got the above error. If I change the DataSource back to
examples-dataSource-demoPool. Everything works fine.
I could not find where the problem is. Could anyone give me a clue.
Thanks
Ruiwu TaoPlease re-post if this is still an issue but first update to CR4E 2 and retest
Maybe you are looking for
-
Hiding a column used in the custom view!
Hello! I would like to find out if there is any way to do the following: I have a view based on a table (Configuration Manager - Views). I specified to display 4 columns to show up in the View, so that we can modify the columns without going into th
-
How can I delete a song and album?
The title pretty much explains it.
-
Account error no mail delivery
Greetings I have a stuck account. i have reconstructed (mailbfr-m) several times, yet mail sits in the queue with a Temporary Failure notice. many flushes. I removed the account from Master and re-entered it. I moved the mailstore to a new location.
-
When trying to log into iCloud, I get error message that this iPhone has exceeded it's limits for free apple I'd accounts
-
My Ipod wont turn off reset restore or do anything. All i see is a flashing light on the screen. My ipod is connected to my computer but it says no ipod connected in itunes and does not show that it is connected in "my computer". What do i do?