Error in monthly performance report.

hi friends , we have developed a monthly perfrmance report for equipments displaying different fields like working hours,availbale hour(per month),HSD(per hour),Spares(per month ),spares(per year) etc. But for some of our plants those wer created after the development of the report, it is not working fine and that too for particular period (mm/yy) 10/2009 to 03/2010.
The report is mainly based on log book entry.
can anybody guide where could be the problem.It is quite clear that the problem is with some entry in the functional module as it is working fine for some plants, The report is working fine on the quality server for the given period.In report user just have to enter month and year,plant for which he wants to see the report.

one strange thing i noticed is that , the z table from which the data is displayed on the report is taking entry for (mm/yy) in selection wrongly.say if user enter the mm/yy as : 10/2009 then the data is stored as 10/2010 for these particular plants not for all plants.. means there is prblem with fiscal year.
I am not able to track the entry which could be common for plants or log book entry.
ALso the problem is only for all recently created plants.
Can anybody tell me that which entry can cause this because in ztable all the enteries are copied from standard tables and then stored in a ztable and finaly displayed in the report.
Edited by: achalmehra on Jan 19, 2010 6:53 AM

Similar Messages

  • Monthly performance report

    Dear All
    I want to generate Monthly performance report for the QM activity.. as per the below table.
    Please suggest the right way to create this query.
    Inspection description            Accepted           Rejected           Rejected %        Under test
    Raw Material                       
    Packing Material
    In-process samples
    AYK

    Hello,
    Dont know how to create in SAP Query. If your looking for ABAP query then can give some input
    You will have to a combination of QALS, QAVE, MARA Tables
    1) In QALS you will get all the lots created for particalur month when you pass from to  date in PASTRTERM (start date).
    2) Get the number of entries for the lot
    3) Pick up material also from QALS (MATNR).
    4) Pass MATNR in MARA to get the material Type (MTART)
    5) Pass the insepction lots to QAVE ( sorted for Material type) to get the UD codes for the inspection lots. ( Accepted or rejected)
    6) Calculate % Rejected
    7) Check number of entries in QAVE table also
    8) Calculate % Test = Number of entries of lot in QAVE table / Number of entries of lot in QALS table
    Regards
    gajesh

  • Monthly Performance Report PP

    Hi BWers,
            I need give an monthly performance Report on PP. Can you please tell me wether these fields are from PP only orelse I need to go for any other modules for datasources. Please let me know which datasources , Fields and Cubes I should use exactly for this report.
    This is the end user Requirement.
    Daily Production
    Day Worked
    Profit
    Total Profit/Loss
    Details of Difference
    Efficiency
    Due to Grasim Power
    Power Failures
    Non/Better availability of Power
    Grasim Load Shedding
    Shifting of Power to Membrance Cell
    Due to less power availability (EC-1 fire 19th)
    Water Crisis
    Breakdown
    Shutdown
    Due to higher CL2 Stock
    Sub Total
    CL/HCL Prod. In comparison to Purta Mix
    Power & Steam Consumption
    Quantity Gain/Loss
    Cell Power
    Aux. Power
    Steam
    Current Density
    Rate Gain/Loss
    Power Rate Loss due to higher average power rate
    Steam
    Sub Total
    Raw Material & Aux. Material
    Quantity Gain/Loss
    Salt
    Sulphuric Acid
    Brine Purification Cost
    CL2 Disposal
    Rate Gain/Loss
    Salt
    Soda Ash
    Realisation
    Caustic
    Quantity Gain/Loss
    Outside Parties & All Group Units
    Rate Gain/Loss
    Outside Parties & All Group Units
    Own Consumption
    Chlorine
    Quantity Gain/Loss
    Rate Gain/Loss (Excl cost of Pkg)
    Hydrochloric Acid
    Quantity Gain/Loss
    Rate Gain/Loss
    Gain/Loss in Special Repairs due to lower/higher repairs (Land filling expenses)
    Gain/Loss in Interest (Working Capital)/Term Loans
    Gain/Loss due to less/more Selling & ADM Overheads
    Other Income (EC-1 Fire Claim)
    Gain/Loss due to decr./incr. in Stock/Valuation
    Gain/Loss due to less/more Salary/Wages
    Thanks & Regards
    KLC

    HI
    i think first you need to check where exactly this is stored in R/3 for example go to the screens where they are storing then it will be easy for you to identify functional areas as well as the tables involved in
    and i don't think we have any fields like salt, hydrocholic acid...they all come under material which are used for production..
    so better first go like this
    thanks and regards
    Neel

  • Error with device performance report

    Hi all
    I had propblem with  Device performance report of LMS 4.0. You could see picture below about the problem. How do resolve it ?
    Thanks

    Hi all
    Here is error about Device performance report. Please help me fix it. Thanks
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: Servlet execution threw an exception
        org.ajaxanywhere.AAFilter.doFilter(AAFilter.java:46)
        com.cisco.nm.cmf.util.AjaxAccessFilter.doFilter(AjaxAccessFilter.java:189)
        com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)
    root cause
    java.lang.OutOfMemoryError: unable to create new native thread
        java.lang.Thread.start0(Native Method)
        java.lang.Thread.start(Thread.java:640)
        com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:923)
        com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1138)
        com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1165)
        com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1149)
        sun.net.www.protocol.https.HttpsClient.afterConnect(HttpsClient.java:434)
        sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(AbstractDelegateHttpsURLConnection.java:166)
        sun.net.www.protocol.http.HttpURLConnection.getOutputStream(HttpURLConnection.java:1019)
        com.sun.net.ssl.internal.www.protocol.https.HttpsURLConnectionOldImpl.getOutputStream(HttpsURLConnectionOldImpl.java:200)
        com.cisco.nm.xms.ctm.client.DefaultHTTPClientImpl.getOutputStream(DefaultHTTPClientImpl.java:83)
        com.cisco.nm.xms.ctm.client.CTMCall.performBinaryRPC(CTMCall.java:782)
        com.cisco.nm.xms.ctm.client.CTMCall.performRPC(CTMCall.java:694)
        com.cisco.nm.xms.ctm.client.CTMCall.invoke(CTMCall.java:409)
        com.cisco.nm.xms.ctm.client.CTMCall.setMethodAndInvoke(CTMCall.java:449)
        com.cisco.nm.xms.ctm.client.CTMClientProxy.invoke(CTMClientProxy.java:70)
        $Proxy544.evaluateGroup(Unknown Source)
        com.cisco.nm.xms.ogs.client.OGSServerProxy.evaluateGroup(OGSServerProxy.java:900)
        com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.evaluateGroup(DeviceSelectorTreeGenerator.java:2621)
        com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.getFirstLevelGroups(DeviceSelectorTreeGenerator.java:453)
        com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.getGroupsAndObjects(DeviceSelectorTreeGenerator.java:399)
        com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.getTreeEntries(DeviceSelectorTreeGenerator.java:192)
        com.cisco.nm.uii.hos.HOSRequestHelper.generateParameterEntries(HOSRequestHelper.java:5560)
        com.cisco.nm.uii.hos.HOSRequestHelper.constructHOSTree(HOSRequestHelper.java:1010)
        com.cisco.nm.upm.reports.devicedashboard.DeviceDashBoardAction.perform(DeviceDashBoardAction.java:65)
        org.apache.struts.action.ActionServlet.processActionPerform(ActionServlet.java:1786)
        org.apache.struts.action.ActionServlet.process(ActionServlet.java:1585)
        org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:491)
        javax.servlet.http.HttpServlet.service(HttpServlet.java:627)
        javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
        org.ajaxanywhere.AAFilter.doFilter(AAFilter.java:46)
        com.cisco.nm.cmf.util.AjaxAccessFilter.doFilter(AjaxAccessFilter.java:189)
        com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)
    note The full stack trace of the root cause is available in the Apache Tomcat/5.5.29 logs.
    Apache Tomcat/5.5.29

  • OIM-performance report

    Consider the use case:
    A performance report needs to be prepared...which would display...the resources provisioned successfully to a user...and the resources failed to provisioned....say if some error occured(for ex. target resource unavailable) or based on some other error response....
    Please guide how to proceed

    Hello,
    You need to change retention peirod of awr/addm report from 7 days to 1 month or 1 year ; u can also create a baseline and compare with your future reports.
    Regards

  • GT70 2PC – Software testing and performance report.

    It is so excited here again. Currently, my first/only object after work is playing Titanfall.
    I intended to share another performance testing today. But I didn’t. I found there are too many great open box posts on different forums. Therefore, I decide to dig the MSI software compatibility and do a touring. What can I say? I’m Mr.Curiosity who really desires to know every built-in application in system. That is why I share this article with you, my friends. I would like to discuss with everybody who is interested in MSI software. Of course, I have some performance reports for you, too. Please also remind me if you find any typo/wrong in this post. Thanks in advance.  
    1. MSI Boot Configure
        This is the first software which pops up immediately. It is thoughtful design because we can choose enter the [Windows 8.1 metro] or [desktop] by ourselves now. I give it two thumbs up!!!
    Select your favorite boot configuration and press [OK]. If we want it work immdiately, we can logout the system and re-login again.
    2.   MSI Remind Manager
    Honestly, I didn’t know what it is in the beginning. The cute robot shows every time when I login the system. I found this is a reminder for product registration. Good, I would like to have best MSI support and warranty for my lovely GT70 2PC. But don’t worry, if you don’t want to get this message again, you just need to select the right option and close it.
    3.   Synaptics TouchPad
    This is a driver for mouse. [Mouse property] will show if we do the double clicks on TouchPad icon in tray. You can choose enable/disable internal pointing device when external pointing device is attached. This is brilliant. A tough guy (like me…HA! HA!) didn’t like to play game with touchpad. Because the character in game will be weak and slow if I control it by touchpad. Of course, I need the external mouse all the time and don’t want the interference from touchpad.
    4.   System Control Manager (SCM)
    We can enable/disable the WLAN/BT/camera devices by SCM. Besides, it can control the display brightness, volume, screen on/off and ECO. ECO is special mode for gaming watching movie.  
    5.   Sound Blaster CINEMA
    Sound Blaster CINEMA is come from an old school audio company – CREATIVE. The software can adjust the surround sound easily. We also can adjust 5.1/7.1 surround sound for the internal speakers and external headphone. That is great, isn’t it?
    Besides, we can also adjust CRYSTALIZER/BASS/SMART VOLUME/digital output by ourselves.
    6.   Killer Network Manager
    This is a major feature of MSI NB.
    In Killer Network Manager, we can set the network priority for each of applications and we also can abandon the connection from malicious software.
    [Performance] shows current status of network. We can find out which application occupied the most greedy resources by it.
    [Network -> Test Network Speed] will detect the network environment automatically. Furthermore, it will adjust the priority for applications.
    [Killer Ethernet] show the LAN connection info.
    [Killer Wireless] show the router info.
    7.   SteelSeries Engine
    This is another major feature of MSI NB
    If we do the right click on icon in tray, the menu will show following list. We can select [Launch SteelSeries Firmware Update Tool], [Updates]…and so on.
    If we select the [Settings]. It can help us change default language and set application auto running when system power on.
    I.   Buttons
    Double click to open the SteelSeries Engine. I think it can set 4 different keyboard settings for each of profiles. And it can switch by FN+1~4.
    [Keypress Marc] can record what you input. And [Record Delays ] can modify the delay time. HA! No game can block us anymore. Please remember to press the [SAVE] for your setting
    [Launch Application] can launch any application immediately. I suggest to set the cold key for this function.
    Here is example. I use [PgUp] to quick start the 3D Mark11. See, it will pop up when I pressed [PgUp].
    It is simple to use [TextMarco] set our own phrase. Now I become a quick speaker in my team. One key, only one key can help me to type a lot of words.
    Are you tired to press some keys that you never want to touch in game (Like WIN KEY)? It is not the problem now.  [Disable Key] will do the favor and disable any key which you hate.
    II.   [Colors] can change the color of backlight keyboard. Also, you can set different modes (Gaming/Audio…etc) on it.
    We can change the color zone. There is not only 4 or 5 colors. The engine provides thousands of colors for us. [Audio mode] is the coolest. It will change colors by itself when we play music by speakers. I like to dance with my keyboard.
    III.   We can select different languages by [Settings].
    IV.   [Properties] can save our hard works of settings reliably.
    V.   If you want to defeat your competitors, it is important to know your enemy. However, It is more important to know yourself. [Statistics] can help us observe which keys are most popular by our fingers.
    Right click on [Profile]. It can modify/export/import/delete the profiles.
    Mouse can use the same kind of settings as keyboard.
    DPI setting for mouse.
    Save files.
    We can record the mouse, too.
    8.   Norton
    Norton Internet Security: Anti-Virus software, MSI provides 60 days for free.
    Norton Online Backup: Online data backup software, MSI provides 30 days for free.
    Norton Anti-Theft: Anti-Theft software, MSI provides 30 days for free.
    If you like Norton’s products, you can buy it online.
    If you don’t, I believe we can uninstall it directly.
    So, the decision is ours.
    Introduction from Norton official website
    9.   Dragon Gaming Center
    I.   System Monitor:
    It can monitor CPU/GPU loading and temperature. We also can find the network speed and fan speed in it.  
    II.   Utility:
    You can set your favorite apps in [Add new Utility].
    E.g. I added a [MSI Afterburner]. Click [Open] to build the link. Do you feel familiar with something? Exactly, [Launch Application] of [SteelSeries Engine] can do this, too.
    III.   Instant Play:
    We can define [Fn+F4] to enable the quick start. But there is more secret.
    We can also use [Browse] to assign the game which we want.  
    Click the icon of game and [Fn+F4] will be ready. We can only use 1 program at once.  
    I usually change the brightness, volume and mouse sensitive before the game. As you know, every games are different. It is sweet because we can use  [Apply Setting] to do this.
    I can’t believe it. We also can find the clock feature in it. How convenient it is!
    IV.   Hybrid Power is another MSI feature.
    It can provide the power by AC adapter and battery in the same time. We can monitor the status in here.
    10. BurnRecovery
    It can create the recovery CD/DVD/USB for MSI NB.
    Here can select Recovery disc/USB/ISO.
    I will make a ISO file first.
    We can select where to put the ISO.
    Creating the recovery file...
    Finish!
    Open the folder and we can find 4 ISO files in it.
    Well…[BurnRecovery Help] provide the details spec.
    In my opinion, everyone should create their own recovery image. You will need it in one day.
    11. Battery Calibration
    This is software for battery calibration. In order to keep our battery good, we should do the calibration every three months. Don’t forget to plug-in the AC adapter and battery during the process..
    Press [Start] to begin the process. It will make the battery fully charged first.
    Then, it will empty the battery like this.
    System will shut down after the empty process. At last, fully charged again. It will take 4~5 hrs to complete the process.
    12. MSI Dragoon Army /MSI Facebook /Web site /YouTube
    Those are MSI forums/Facebook/official website/YouTube and links.
    [MSI Dragoon Army] is the official forum for MSI. We can find NB, MB and AIO info in it.
    Facebook Quick Link for many countries of world.
    MSI official website
    YouTube channel of MSI.
    13. Super-Charger
    There is no message when I click this app at the first time. But when I attached my IPAD, it pops up the [Super-Charger]. It is amazing because IPAD can’t be charge by this USB port. As far as I know, the USB 3.0 only provides maximum 900mA for its device. IPAD will need 2.1A for charge process. I have no idea how MSI NB make IPAD charging okay.
    14. XSplit GameCaster
    This is one of important features. I saw many different first class gaming machines this year. All of them have the broadcast software. (Like PS4, Xbos ONE)
    It can switch the default language after we login.
    Twitch/YouTube / Facebook/ Twitter/Google+ can be used by [Accounts]. It is easy to start the live show.
    We can modify the resolution and use twitch by [Setting]
    We can configure FPS/CPU loading/where to show on display by [Status label].
    Hotkey configuration.
    Videos storage.
    Press [Ctrl+Tab] to call Gamecaster in game. And we can twitch or modify setting. I will provide my gaming video for you later.
    15. Power DVD
    This is a famous video player. Also, it can support BD format.
    We can use the [Setting] to change our language.
    We can change 5 times for default country .
    It is glad that I’ve finished the introduction of GT70 software.
    Performance report:
    Um…Now is late at night. I should go to my lovely bed.  Following is the testing report for the reference.
    1.   FurMark
    1920*1080, 15 minutes.
    2.   AIDA 64
    CPU and GPU stress testing, 30 minutes.
    3. 3D Mark 11
    4. 3DMark Vantage
    5.   3DMark 2013
    6.   Heaven Benchmark 4.0
    7.   CINBENCH 11.5
    8.   FINAL FANTASY XIV Benchmark
    9.   PCMARK 7
    10.   HD Tune Pro  5.50
    11.   AS SSD Benchmark
    12.   Crystal Disk Mark
    I didn’t forget my promise. Here is my gaming videos
    http://youtu.be/tCd5Lnj2U0I

    Editors' Choice Award. Good job MSI !!
    http://www.computershopper.com/laptops/reviews/msi-gt70-dominator-893#review-body

  • Vendor Scorecard Performance Report

    The Vendor Scorecard Performance Report data is based on dates entered in the PO (dates provided by the vendor to us at the time we cut the PO or even months after the PO is cut-this date can change) as opposed to our expected lead time (lead time promised by the vendor in general).We always need to put the vendor's advised date in the PO so that our back-order reports have the correct ETA info. Currently, the report will show the vendor as having an almost perfect record because our expected receipt date is based on the vendor's production schedule (whether it is within our expected lead time or not).
    We need some kind of indicator in the vendor set up which tells the system that the expected delivery date is "out of tolerance". Is there any way to achieve this and have the report based on expected lead time as opposed to PO dates?
    Could somebody please help me to achieve this...?

    No database version? No example tables and data? No attempt to solve this yourself?
    Please provide the necessary details as mentioned in the SQL and PL/SQL FAQ:
    {message:id=9360002}

  • Performance Report in EM

    Is it possible to produce a performance report of a database in Enterprise Manager over 1 month to 1 year ???

    Hello,
    You need to change retention peirod of awr/addm report from 7 days to 1 month or 1 year ; u can also create a baseline and compare with your future reports.
    Regards

  • Setting IT performance report in Solman

    Hi,
    We are trying to set up IT performance reporting in Solution Manager. BI client is same as production client. The Info objects are not getting activated. The job fails with the message to use a different BI client.
    SOLMAN SM37 Job log:
    Message text
    Message class
    Message no.
    Message type
    Job started
    00
    516
    S
    Step 001 started (program CCMSBI_SETUP_BATCH, variant , user ID KZHX33)
    00
    550
    S
    Incorrect client 025
    00
    001
    S
    use BI client 001.
    00
    001
    S
    Prerequisites check failed
    00
    001
    A
    Job cancelled
    00
    518
    A
    If any one faced this issue and resolved, kindly throw some light on it.
    Thank you.
    Regards,
    Manju

    Hi Manju,
    The issue is due to inactive object in the infocube .
    Please check the note: 1110013 - ST: Manual activation of BI Content for E2E Diagnostics SP13 attachment . it will help to activate the inactive object.
    or
    Go to basis configuration -> step 5. configure automatically ->re-excute the Activate BW Source System. so it will reactive the infocube.
    Also check the below discussion,
    CCMS_BI_SETUP IT Performance Reporting Activation
    Error :
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMDAY1 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMDAY1 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMDAY2 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMDAY2 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMMIN1 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMMIN1 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMMIN2 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMMIN2 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMMNTH1 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMMNTH1 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMMNTH2 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMMNTH2 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMQTR1 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMQTR1 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMQTR2 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMQTR2 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMVRKF failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMVRKF manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMWEEK1 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMWEEK1 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0CCMWEEK2 failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMWEEK2 manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoCube 0SMD_PE2H failed
    20140620 050208[HELP ]: Attempt to activate object CUBE:0SMD_PE2H manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoSet 0CCMIAGGR failed
    20140620 050208[HELP ]: Attempt to activate object ISET:0CCMIAGGR manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoSet 0CCMIAVDT failed
    20140620 050208[HELP ]: Attempt to activate object ISET:0CCMIAVDT manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of InfoSet 0CCMICURR failed
    20140620 050208[HELP ]: Attempt to activate object ISET:0CCMICURR manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of MultiCube 0CCMPDATA failed
    20140620 050208[HELP ]: Attempt to activate object MPRO:0CCMPDATA manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of MultiCube 0CCMSDSR failed
    20140620 050208[HELP ]: Attempt to activate object MPRO:0CCMSDSR manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of MultiCube 0CCMSMTPH failed
    20140620 050208[HELP ]: Attempt to activate object MPRO:0CCMSMTPH manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of MultiCube 0SMD_MPEH failed
    20140620 050208[HELP ]: Attempt to activate object MPRO:0SMD_MPEH manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of DSO 0CCMAGGR failed
    20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMAGGR manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of DSO 0CCMAVDT failed
    20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMAVDT manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of DSO 0CCMBUFF failed
    20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMBUFF manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of DSO 0CCMCURR failed
    20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMCURR manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of DSO 0CCMSDCFG failed
    20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMSDCFG manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of DSO 0CCMSYINF failed
    20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMSYINF manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of DSO 0CCMTHRS failed
    20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMTHRS manually in transaction RSOR. If this is successful, execute setup again.
    20140620 050208[ERROR ]: Activation of DSO 0CCM_SCFG failed
    20140620 050208[HELP ]: Attempt to activate object ODSO:0CCM_SCFG manually in transaction RSOR. If this is successful, execute setup again."
    Rg,
    Karthik

  • TFS performance report pack not working on TFS 2013

    Hi
    I have TFS 2013 setup and I found TFS performance report pack from http://blogs.msdn.com/b/granth/archive/2009/02/03/announcing-tfs-performance-report-pack.aspx URL.
    These reports don't work after uploading to my report server. The blog talk about creating a shared data source TfsActivityReportDS
    and using Data Source=localhost;Initial Catalog=TfsActivityLogging
    as connection string.
    I don't have any database by name TfsActivityReportDS in my TFS and as a result I am not able to run any report on my TFS 2013 server.
    Is there any way to get these reports work for TFS 2013? Or is there other TFS performance report pack made for TFS 2013?
    Regards, Premal Acharya

    Hi Charles,
    Thanks a ton for your help. :)
    It worked on TFS 2013. I followed your steps. I also found one easy way to edit the queries mentioned in those rdl files. I opened them in text editor and replaced TfsActivityLogging with my TFS project name (Tfs_DefaultCollection). Saved rdl file and opened
    it in report builder and then my job was only to modify the data source.
    I really appreciate your help for getting the reports worked on TFS 2013.
    However I am only stuck with one little issue pertained to Server Status - Source Control Request Queue.rdl file
    This report file doesn't have any queries and it also uses XML as connection to the data source. When I run this report on my TFS server I am getting error as URL "http://localhost:8080/versioncontrol/v1.0/administration.asmx" not found.
    Detailed information about the report file is given below.
    Report Name
    Server Status - Source Control Request Queue
    Connection type
    XML
    Connection string in data source 
    http://localhost:8080/versioncontrol/v1.0/administration.asmx
    Query Under data set
    <Query>
       <Method Name="QueryServerRequests" 
    Namespace="http://schemas.microsoft.com/TeamFoundation/2005/06/VersionControl/Admin/03">
       </Method>
       <ElementPath IgnoreNamespaces="true">*</ElementPath>
    </Query>
    -------END---------
    I don't know how to get it work. Your help and advice on this will be highly appreciated.
    Thanks again for helping me to get other reports worked with TFS 2013.
    Regards, Premal Acharya

  • Performance Report using OEM-11g

    Hi All,
    Is there any way to get the Monthly Database performance report using OEM Grid Control... I am able to grab only one week data in Historical option....
    Thanks In advance

    I have the same problem in OEM 11g, the calendar on the Performance tab - Historical selection - only shows "January 0" and can not be changed...a bug?
    Oracle 11.2.0.2.0 database on AIX.
    Using OEM Cloud 12c on some test instances again 11.2 on AIX and it works fine there.
    Any updates?

  • Database performance report

    Hi all,
    I'm a DBA and my Boss want a daily and monthly dataabse performance report like CPU usage, memory usage, IO. I know for me i can monitore that in Oracle enterprise manager but my boss no, and he wants a xls file with graph and chart like in Enterprise.
    That i want is if somebody has script to retrieve those information or where can i get those informations in what dba tables or views.
    You know i want to get the information used in Enterprise manager but i don't know from which v$view oracle retrieve these information.
    I want CPU, MEMORy, I/O average usage by hour or by day.
    My database version is 10.2.0.3 with ASM configuration
    Many thanks in advance.
    regards
    raitsarevo

    Yes that's a good idea but i just want if this AWR informations are stored on some V$ views or tables.
    I'm afraid about runing statspack report every hour for performance reason, i think AWR runs every hour and they both has the same activities, so why to need runing statspack.
    thanks for your advise.
    raitsarevo

  • IT performance report in workcenter logon getting failed

    Hi All,
    When i click on the IT performance report in workcenter log in getting failed
    Steps:
    Solman_workcenter tx -System monitoring ->System status -selected the system
    When I click on IT performance report I am not able to login I am getting this below  error when i give  the username and password  of SOlman system
    SAP Web Application Server [SID]
    username
    password
    Problem:
    Logon failed
    What has happened?
    Call of URL http://<hostname>.wilns1002.accenturewilm.com:8000/sap/bw/BEx terminated due to error in logon data.
    Note
    Logon performed in system SID.
    Logon performed for client ?sa, user sm_admin, and language EN.
    What can I do?
    Check that you have entered the client, user, and password correctly.
    If you do not yet have a user ID, contact your system administrator.
    Error Code: ICF-LE-http-c:?sa-l:E-T:231-C:3-U:54-P:4-L:4
    HTTP 401 - Unauthorized
    Your SAP Internet Communication Framework Team
    Regards,
    Neni

    hi,
    this was already discussed,
    workarround suggested this was due to single sign on.
    chk the forum
    [URL http://server:8000/SAP/BW/BEX is not accessible|URL http://server:8000/SAP/BW/BEX is not accessible]
    [/message/5063236#5063236 [original link is broken]|/message/5063236#5063236 [original link is broken]]
    Jansi

  • Production performance report against work center.

    Hi PP Gurus,
    There is a requirement to develop a production line (work center) performance report in BI which is comprising of Planned setup time, Actual setup time and their variance against a production plant and work center. Input parameters will be Material, Plant, Work center, Date/Week/Month. The scenario is PP Discrete Manufacturing.
    Could anyone please tell me how to fetch data from different tables and how to interlink them?
    Thanks & Regards,
    Abu Arbab

    Hi Brijesh,
    Thanks for reply
    As I told in my first post that I need tables,fields/infostructure that should contain Planned setup time, Actual setup time. I got some infostructure like S022, S024, S281, S282, but I'm not getting exact link between one of them related to input criteria.
    If anybody worked on such requirement please reply
    Thanks & Regards,
    Abu Arbab

  • Budget and performance report

    Hi,
    I'm new to webi.
    Please tell me the most suitable approach for comparing budget and performance on webi report.
    Each approach has good points and bad points?
    Environment : BO XI 3.1 webi
    Requirement : Comparison of budget and performance on one report.
    Precondition : Data granularities of budget and performance are different. Budget is monthly data. Performance is daily data.
                   Comparison is executed with budget and summarized monthly performance data.
    Approach1:
    DB layer
      create each fact table of budget and performance
    Universe layer
      create one universe from above fact tables.
    Report layer
      create webi report from universe  (summarize performance to monthly data)
    Approach2:
    DB layer
      create each fact tables of budget and performance on database
      create view or one table from above fact tables on database (summarize performance to monthly data)
    Universe layer
      create universe from above view or table
    Report layer
      create webi report from universe
    Approach3:
    DB layer
      create each fact tables of budget and performance on database
    Universe layer
      create derived table from budget and performance  (summarize performance to monthly data)
    Report layer
      create webi report from universe
    Thanks,
    Hiroyasu

    It depends. The simple way is to create universe against the fact tables. And make the Webi do all the analysis work.
    Some customers have concerns on performance, they chose to create additional tables to store the aggregated data based on different granularities. And make universes to connect corresponding tables to any given granularity.
    So there is not absolute answer to your question.

Maybe you are looking for

  • How do i change primary smtp server?

    How do I change my primary smtp server? I can delete all the old accounts I no longer use as email accounts, but the primary smtp server for the accounts I still use is still set as that for the old server. Not only is there nowhere to delete it, I c

  • T430 minidispla​y port no sound

    Hi all, I tried to connect my T430 to a LCD TV through mini-display port. I used a mini-display to hdmi adaptor and a HDMI cable. The problem is I only got the picture and the audio cannot be transmitted to TV. The mini-display to hdmi adaptor works

  • Help - Edit cell of a multicolumn listbox at run time

    Hi All, I am populating rows and columns of a multicolumn listbox from a file at run time. However, after the data is loaded in the listbox I want to have the option of changing cell value. Can I do that? If so, how? I appreciate your time and help.

  • Many application problems

    I have unexpectdly quit, keyboard command issues, can't open applications, etc issues with Quark, Illustrator, QuickBooks, Photoshop, and more. I talked to Apple, they had me run tests and re-install, I still have issues and do not know what to do. I

  • $ sign in code of designer

    hello, I have a fundamental question, in evry form or report created by Designer, it creates objects ad triggers using some prefix and a "$", is this for standards or is there a typical reason behind this Vishnu Vadla null