ERROR in MR8M - The acquisition value is negative in the area 02

Hello,
I am not able to reverse by MR8M a document released in MIRO, of an error: "The acquisition value is negative in the area 02 - AA617 message. "
Can anyone help me?
Thank you in advance,
Luiz Henrique

Hi,
The reason wold probably be that the Asset master would have been already capitalized or it would have been de-activated. Kindly check with your finance team before processing MR8M.
Regards,

Similar Messages

Acquisition value is negative in area 15

hi ,
there is a gr dated 30.11.2010 .
IR-L dated 21.12.2010
ir-L reverse doc dated 31.03.2011
now when i m trying to cancel gr document using tcode migo's cancellation doc m getting error "acquisition value is negative in area 15"
So how i can solve this problem .
Thanks in advance
shikha

HI,
As per the above error message, I hope you are doing a GR reversal for an asset.
So its better to take the help of your FI consultant.
If you search in Google/SDN forum with the above error message, you will get a lot threads for your reference.
Thanks & Regards,

Error when reversing MIRO - "Acquisiton value is negative in area 40"

Hello, consultants!
I am trying to rever a MIRO (posted in june 27) in teh current period (june is still open), but I receive the following message: "Acquisition value is negative in area 40".
I believe this are is the deprciation area. However there are no depreciation postings to that material (which is an asset that was entered 3 days agoa and we have not yet run the depreciation program).
What could be the reasonf for that message?
Thank you all,
Naej

HI,
a) Your area 40 is probably in a different currency - Make sure that for the reversal the Posting Date/Document date & Asset value date are the same.
b) SInce posting the invoice the APC of the asset has been reduced by another posting.
Kind regards

Job scheduling error : The return value was unknown. The process exit code was -1073741819. The step failed.

I am working in Sqlserver 2008 R2, SSIS 64 bit version
I am getting the below error while scheduling the job in the development server Database.
The return value was unknown. The process exit code was -1073741819. The step failed.
The SSIS front end execution runs fine.
Have anyone faced this issue before?

Hi Venkat,
If you already changed to 64bit and still doesn't work then create proxy account..
To create a proxy account
In Object Explorer, expand a server.
Expand SQL Server Agent.
Right-click Proxies and select New Proxy.
On the General page of the New Proxy Account dialog, specify the proxy name, credential name, and
description for the new proxy. Note that you must create a credential first before you create a proxy if one is not already available. For more information about creating a credential, see How
to: Create a Credential (SQL Server Management Studio) or CREATE CREDENTIAL (Transact-SQL).
Check the appropriate subsystem for this proxy.
On the Principals page, add or remove logins or roles to grant or remove access to the proxy account.
Thanks

Error «The entered value is not on the list of valid values» in the hierarchy of mss web dynpro abap

Hello Experts
The error «The entered value is not on the list of valid values» in the hierarchy of mss web dynpro abap occurs after manager’s following actions:
selected detailed Team View ;
selected hierarchy;
changed style of the hierarchy to any other (for example, the vertical);
the error occurs after attempting to do any action.
Our system is EHP7.
If someone faced with this error, please give me advice how can i resolve this problem.

Hi John,
Sorry for the delay in replying. No, we do not have the same problem if we understand you correctly.
"We have bypassed the MSS Home Page and just embedded the Detailed Team View as a standalone application in our MSS portal role" - we also made for the our customer. BUT we have error «The entered value is not on the list of valid values» in our standard system.
Regards,
Andrey

Error the entered value does not match the specified field type

Hi,
When I try to insert a null value to a field of the User Defined Table I am getting the error "The entered value does not match the specified field type" in SAP Business One version 2007 PL 42.
Any help would be appreciated.
Thanks in advance.
Sudha.

Hi Sudha,
It probably have to do with how you defined the field.
Is Null value allowed?
What are the field definitions?
Thanks,
Jesper

SQL 2012 - SSIS Error -The step did not generate any output. The return value was unknown. The process exit code was -1073741819. The step failed.

Hi guys
Trying to run this package on SQL 2012 agent and getting below error . No more details I could find so far.
The step did not generate any output. The return value was unknown. The process exit code was -1073741819. The step failed.
About Package - Its connecting to different version (2000,2005,2008,2008R2,2012) servers and putting Jobs information into one Database table.
Any workaround or fix ?
Thanks
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

New package or one that used to work? Connecting how? How does it poll?
On the surface it is an error from a memory space of the binary/non-managed code, so nothing can be really concluded based on what you decided to share with us.
Arthur My Blog
So Same package is working fine from my local machine which has SQL 2008 R2 and SQL 2012 installed. I am trying to push the package on server which has sql server 2012 Installed .
I don't see any error .
I ran package manually from server using SQL Data tools and ran successfully...
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

Checkbox error "The Entered Value is Not on the List of Valid Values".

Hi All,
I have a check box attribute inside a node which is bounded to a field of type CHAR 1. I have given the property and value for the attribute as follows:
Attribute Name     ZCHECK
Type assignment     Type
Type                          ZTABLE-ZCHECK
Read-only                         0
Default Value
Null Value                           0
Input Help Mode     Automatic
Determined Input Help     ZCHECK
Type of Input Help     Fixed values for domains
Formatting
Compression     Default Value
I have created an onToggle Event for it.
Now when i execute my component i do the following.
First i click on a button called 'EDIT'. Now the check box comes to edit mode. Now when i click on the checkbox i get the following error. "The Entered Value is Not on the List of Valid Values".
When i try to debug, there is no problem in the 'INIT' method. The error is throw even before going inside the onToggle Event for check box.
Please explain how to over come this.

Hi,
Check your field ZTABLE-ZCHECK, if it is of type CHAR1 then only possible values for checkbox should be 'X' and ' '.
May be your domain has some other values in Fixed Value List.
its better to bind checkbox with attribute of type boolean
Also, the input help for attribute bound to checkbox doesn't makes any logic.
Regards
Manas Dua
Edited by: Manas Dua on Feb 26, 2010 3:11 PM

How can I get the default value of a particular preference programatically. I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.

<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [tiki-view_forum_thread.php?comments_parentId=702631&forumId=1]
Thanks - c</blockquote>
== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
How can I get the default value of a particular preference in FireFox?.
I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.
I see some that there are values for preferences in firefox.cs but I am not certain that these are being used as the default values for preferences. prefs.js in user's profile only has the updated values and not the default values.
Any help towards acheiving this programtically is greatly appreciated.
If the default values are stored in a file, kindly let me know the format in which it is stored for me to parse it programatically.
== User Agent
==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

Dear Friend,
Here when you have the callableSattement as ?=proc(?), the first ? is an output parameter. So you should register it as out parameter using registeroutparameter.
Then you can get the value from the outparameter using callablestatement.getXXX().
Try that way.
For free tral versions of JDBC Drivers go to www.Atinav.com

How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0, How to get Basic salary amo

How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0, How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0

Hi,
Is your formula attached to basic salary element or some other element? You need to make sure that basic salary element has some value and is processed before this formula is called. Are you able to see value for basic salary element after payroll run?
Regards,
Pawan

Ho to Generate the Numeric Values Automatically before saving the records

Hello to everybody,
I have a data block naming “BILL” consisting of the following 3 field.
1. Sr_No
2. Bill_Amount
3. Description
This Data Block consist 10 records at a time.
I want that whenever I insert records in the above data block.
Serial No should automatically be generated.
For this I have applied the following code in “WHEN-NEW-ITEM-INSTANCE” trigger.
<CODE>
SELECT NVL(MAX(Sr_No),0)+1 INTO :BILL.Sr_No FROM BILL;
</CODE>
Whenever I insert records in the BILL data block, the first row automatically generates the “Sr_No”, but when I move to the next record, (remember currently I have not saved the record), the same value which appeared in the previous record appears in the Sr_No field.
For example, when I insert records for the first time in the BILL, the Sr_No field automatically generates value “1”, but when I move to the next record while not saving the first record the next row still generating value “1”, while it should be value “2” and so on.
Note that I want that before saving the previous record when I move to the next row, the Sr_No should generate the next continuous value like in example.
Please help me to solve out this problem.

You have practically scratched you left ear with your right foot while jumping on the left foot :-)
Seriously, you guys don't need to go to all this trouble.
If you want a serial number incrementation, all you need to do is to either select the max value + 1 from the table or select the next value from a sequence in an PRE-INSERT trigger on block level, and that's it!!!!
Tony

The default value as "None" for the report filter which is Value List type?

Hello,
I want to know is it possible to make the default value as "None" for the report filter which is Value List data type?
For example:The Project Classification Value List value type which have many value like "Supplier Rationalization" "Category Sourcing" "Contract Regegotiation" etc, and the value "Supplier Rationalization" is in the frist positon in the value list. When i use "Project Classification " as a report filter, the value "Supplier Rationalization" displayed as default value. And in the value list box in report filter of Project Classification , there is a value "None" which should be added automatically by system. So i manually filled the default value with "None" in Filter Prompt screen, but it does not work. After i display the report ,the Project Classification filter still use the ""Supplier Rationalization" as the default value.
My current ESO version is 5.1. I tried other ESO version like 5.15, if i manaully give a default value "None" in Filter Prompt screen for filter Project Classification, then the default value is "None". It works well.
Does anybody know if it's possible to do the same thing in ESO 5.1?
Thanks & Regards,
David
Edited by: David Gao on Aug 11, 2010 4:06 AM

Hi David -
This is possible, but the technique is not too obvious...
To make "None" be the default choice for a query definition filter parameter of type value list type, you need to set the default value of the filter parameter to the following:
<internal id of value list type>:616:NULL
For example, I believe you will see that the internal id of the Project Classification value list type is 51, so the default value of the filter parameter would be:
51:616:NULL
I hope this helps.
Regards,
Rob

What is the transaction type to reduce the acquisition value

Hello all:
I use Transaction type 100 to acquire the asset for example 100 eur.
what is transaction type to do reduction for 20 eur for example for some interest expense.
BR,
Manthana

Hi
You want to reduce the Asset value then use the Transaction Type 105 or 160 based on the Year of Acquisition.
You can simply pass a manual entry Crediting this Asset and Debiting an AUC or Expense G/L Account.
1. 70 AUC Asset TTYPE(100) 20Eur
75 Asset (105/160) 20EUR
2. 40 ExpenseG/LA/C 20EUR
75 Asset (105/160) 20EUR
Regards
Venkat

Error: Balance for transaction type group 10 negative for the area 01

Dear All,
Our enduser wants to return the capital goods after 3 years ( Purchased on May 2005) to vendor due to poor quality.
While trying to return through MIGO (Return Delivery - Mvmt Type 122) system throws the following error:
>
With the transaction entered, the balance for the transactions in group 10 in area 01 will be negative in this fiscal year. However, the balance of transaction type group 10, according to its definition, must be positive in each fiscal year.
>
Note: Depreciation posted upto May 2008.
Please guide me for the same.
Regards
Jai

Hi,
I have similar problem. The error message appears if user tried to reverse one of the documents posted incorrectly from PO to an asset. The PO has been create in the last FY, but all the posting in AA happend in this FY.
(Our FY is not equal calendar year).
So cumulated from FY start there were posting made - for:
- aquisition 150 (transaction type group 14)
amount: 428.587,73
- and the couple of credit memos have been posted 105 (with transaction type group 10)
amount: -511.162,90
- and again the aquisition posted 152 but this time form previous FY (transaction type group 19)
amount: 442.537,25
So now, is SAP checking the transaction type group exclusively and in this case would be understandable that the amount is negative already or is looking for the posting, document or entry date?
Thanks, Krysia

Calculate the total value of payments with the procedures and triggers?

Hello!
I work for a college project and I have a big problem because professor requires to do it by the examples he gives during the lecture. Here's an example that should be applied to its base, so please help!
I have three table with that should work:
Invoice (#number_of_invoices, date, comm, total_payment, number_of_customer, number_of_dispatch)
where:
number_of_invoices primary key (number),
date (date),
comm (var2),
total_payment is UDT (din - currency in my country) - in this field should be entered value is calculated
number_of_customer and number_of_dispatch (number) are foreign keys and they are not relevant for this example
Invoice_items (#serial_number, #number_of_invoices, quantity, pin)
serial_number primary key (number),
number_of_invoices primary key (number),
quantity (number),
pin foreign keys (number)
Item (#pin, name, price, tax, price_plus_tax)
pin primary key (number),
name (var2),
price, tax, UDT (din) not relevant for this example
price_plus_tax UDT (din)
These are the triggers and procedures with my calculation should be done:
trigger1:
CREATE OR REPLACE TRIGGER "trg1"
BEFORE INSERT OR UPDATE OR DELETE ON Invoice_items
FOR EACH ROW
BEGIN
     IF (INSERTING OR UPDATING)
     THEN
          BEGIN Invoice_items.number_of_invoices := :NEW.number_of_invoices; END;
     ELSE
          BEGIN Invoice_items.number_of_invoices :=: OLD.number_of_invoices; END;
     END IF;
END;trigger2:
CREATE OR REPLACE TRIGGER "trg2"
AFTER INSERT OR UPDATE OR DELETE ON Invoice_items
DECLARE
doc NUMBER := Invoice_items.number_of_invoices;
BEGIN
     entire_payment (doc);
END;procedure
CREATE OR REPLACE PROCEDURE "entire_payment" (code_of_doc IN NUMBER) AS
entire NUMBER := 0;
BEGIN
     SELECT SUM (a.price_plus_tax * i.quantity) INTO entire
     FROM Item a join Invoice_items i on (a.pin = i.pin)
     WHERE number_of_invoices = code_of_doc;
     UPDATE Invoice
     SET total_payment = entire
     WHERE number_of_invoices = code_of_doc;
END;As you can see the procedure is called from the triggers, I have a problem at the first trigger, and I think it will be even higher in procedure because UDT, field "total_payment".

I was not here a few days because I was trying to get additional information related to this problem. Professor gave me the information that I need to introduce a package and variable to get this thing work. But including that I still have problem. I hope that this time is less of a problem and that someone will be able to help me.
I also noticed that it was not a smart idea to try to translate the names of tables and attributes. That make trouble for me, especially you who are trying to understand and to help me, and absolutely nothing that will change the attribute and the table name will be. So this time I will set out the problem with the original name again to avoid confusion.
So, I try to base Implement optimization technique called: Repeating Single Detail with Master (so writes the slides that I received from professor, I hope that will mean something to you)
These are the lines of code that we get on the slides and should implement in the base, again I remind you that at this time in its original form, without translation.
- First create the package variable:
create or replace
package paket
AS
sifra number(10):=0;
end;This part is ok and it works.
- Secondly, it is necessary to create the first trigger:
create or replace
TRIGGER aktuelna_cena1
BEFORE INSERT OR UPDATE OR DELETE ON cena_artikla
FOR EACH ROW
BEGIN
     IF (INSERTING OR UPDATING)
     THEN
          BEGIN paket.sifra := :NEW.sifra_artikla; END;
     ELSE
          BEGIN paket.sifra := :OLD.sifra_artikla; END;
    END IF;
END;This part is ok and working.
Now the problems begin.
- It is necessary to create another trigger that will call the procedure:
create or replace
TRIGGER aktuelna_cena2
AFTER INSERT OR UPDATE OR DELETE ON cena_artikla
DECLARE
     s NUMBER := paket.sifra;
BEGIN
     aktuelnacena (s);
END;I suppose the trigger have problem because procedure is not ok.
I will copy error that I get from the compiler:
Error(7,2): PL/SQL: Statement ignored
Error(7,2): PLS-00905: object NUMBER6.AKTUELNACENA is invalid
And finally, it is necessary to create the procedure:
create or replace
PROCEDURE aktuelnacena (SifraPro IN NUMBER) AS
aktCena artikal.aktuelna_cena%type;
BEGIN aktCena:=0;
                SELECT cena INTO aktCena
                FROM cena_artikla
                WHERE sifra_artikla=SifraPro and datum_od=
                                (select max(datum_od)
                                from cena_artikla
                                where sifra_artikla = SifraPro and datum_od<=sysdate);
                UPDATE artikal
                SET aktuelna_cena = aktCena
                WHERE sifra_artikla = SifraPro;
END;I will copy error that I get from the compiler:
Error(10,57): PLS-00103: Encountered the symbol " " when expecting one of the following: ( begin case declare end exception exit for goto if loop mod null pragma raise return select update while with << continue close current delete fetch lock insert open rollback savepoint set sql execute commit forall merge pipe purge The symbol " " was ignored.
Tables I work with are:
Artikal (sifra_artikla, naziv, aktuelna_cena),
Cena_artikla (sifra_artikla, datum_od, cena)
You will notice that this differs from the first problem, but my task is to implement the two optimization techniques and my base. Both techniques are quite similar and I hope that I now have enough information to help me. I suppose that when this problem is solved the othet one will too!
Thank in advance!

ERROR in MR8M - The acquisition value is negative in the area 02

Similar Messages

Maybe you are looking for