Error in MR8M transaction
Hi,
When I try to do cancel invoice in MR8M we are encountering error as mentioned below,
Balance in Currency USD, currency type 10
Message No M8285
Please guide me to resolve this issue.
Cheers,Kumar.S///
As the meesage type starts with M it is related to MM.
The transaction is starting with M, so it is MM
the transaction where you get the error is in the MM menu path, so it is MM.
of course this is a kind of a shared area, even it is a MM transaction, it is often performed in a FI department.
And FI module has as well transactions to post invoices - that are not PO related. And they are using as well most of the common customizing and master data tables. Because of this you can still discuss your problem with an FI/CO collegue. Maybe he knows the root cause right away.
Similar Messages
-
Error when trying to Cancel an invoice document via MR8M Transaction
Greetings Everyone,
l am having an issue when trying to cancel an invoice document via MR8M transaction. It gives me the following error message;
SYSTEM ERROR: error in routine MRM_DRSEG_CR_CREATE
Message no.M8008
Procedure:
Contact your system administrator.
This invoice was related to a check payment. The check has been voided already and there is no clearing document for the accounting document. So, the item remains open. However when l try to reverse, it display the error message above.
Thanks in advanceread notes 449277 and 750455, your solution is probably there.
-
Hi All,
While cancelling an invoice in MR8M Transaction, i am getting an error in the first screen as 'Acquisition value negative in area 81.
What could be the reason???
Regards
Pavan SanganalHi,
you can go to you assets records AS02 - Depreciation Area (F8). Hit twice in Dep. Area 81 and check "Negative values allowed". If you have no displayed field you can customize this field status. Go to AS02 menu: Environment -> Screen Layout -> Depreciation Area. Set as optional for main number and sub-number.
Test again and let me know how was processed. -
Error while executing transaction in logic editor
Hi all,
When i try to execute a transaction in logic editor in my system i get the following error.
[DEBUG]: Transaction Complete.
[ERROR]: Error executing transaction Status (403):ok
But when i try to exectue the same in a different system,the transaction is sucessfully executed.could anyone help me out with is issue!U better try to clear the cache enteries and try this.it may help
-
Error while sending transaction
Hi All,
We are facing below error while sending transactions,
We are able to send successfully OAGIS file to supplier using custom documnet over internet, but in the reports after couple of sceond it showing one blank error.
EX:
Machine Info: (usstlz-pinfwi11)
Description: Unable to identify the document protocol of the message
StackTrace:
Error -: AIP-50083: Document protocol identification error
at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3245)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2384)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1827)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:976)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
at java.lang.Thread.run(Thread.java:534)
If I check the payload it showing empty and wire message is below
Date=Tue, 23 Feb 2010 11:59:38 GMT
Server=Microsoft-IIS/6.0
X-Powered-By=ASP.NET
Content-Length=0
We are ableto receiving a MDN back from them.
Could you please tell what we need to set in below for both inbound and outbound transactions
Functional acknowledgement required?
Is acknowledgement handled by Integration B2B?
for custom document over internet...
p[lease help me to resolve this
Regards
cnu
Edited by: B2B_GoToGuY on Feb 23, 2010 4:36 AMAnuj ,
here is the log and i send it ur ID also
Parameters
-- listing properties --
http.sender.timeout=0
2010.02.22 at 10:03:53:844: Thread-20: B2B - (DEBUG) scheme null userName null realm null
2010.02.22 at 10:03:57:590: Thread-20: B2B - (DEBUG)
Protocol = HTTP
Version = HTTP/1.1
Transport Header
Date:Mon, 22 Feb 2010 16:03:57 GMT
X-Powered-By:ASP.NET
Server:Microsoft-IIS/6.0
Content-Length:0
2010.02.22 at 10:03:57:594: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send Message Successfully Transmitted
2010.02.22 at 10:03:57:597: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Send Successful!, Request Message sucessfully Transmitted
2010.02.22 at 10:03:57:600: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Calling postTransmit to do post transmit processing of request message
2010.02.22 at 10:03:57:602: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.02.22 at 10:03:57:605: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2010.02.22 at 10:03:57:607: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.02.22 at 10:03:57:610: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:postTransmit Enter
2010.02.22 at 10:03:57:613: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:postTransmit AckMode is SYNC
2010.02.22 at 10:03:57:615: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Enter
2010.02.22 at 10:03:57:657: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Exit
2010.02.22 at 10:03:57:660: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:postTransmit Update the Message Table Row with message state Wait for Incoming Acknowledgment
2010.02.22 at 10:03:57:679: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:postTransmit Commit
2010.02.22 at 10:03:57:683: Thread-20: B2B - (DEBUG) DBContext commit: Enter
2010.02.22 at 10:03:57:690: Thread-20: B2B - (DEBUG) DBContext commit: Transaction.commit()
2010.02.22 at 10:03:57:693: Thread-20: B2B - (DEBUG) DBContext commit: Leave
2010.02.22 at 10:03:57:695: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.02.22 at 10:03:57:697: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2010.02.22 at 10:03:57:699: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.02.22 at 10:03:57:702: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Enter
2010.02.22 at 10:03:57:711: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Identify Business Protocol
2010.02.22 at 10:03:57:713: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:identifyExchange Enter
2010.02.22 at 10:03:57:715: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:identifyExchange Exit
2010.02.22 at 10:03:57:718: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Do Unpack using the BP specific package class
2010.02.22 at 10:03:57:721: Thread-20: B2B - (DEBUG) MimePackaging:unpack:Enter
2010.02.22 at 10:03:57:723: Thread-20: B2B - (DEBUG) MimePackaging:doUnpack:Enter
2010.02.22 at 10:03:57:726: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Enter
2010.02.22 at 10:03:57:728: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:encoding = UTF-8
2010.02.22 at 10:03:57:731: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:oracle.tip.adapter.b2b.packaging.Component@7cb44d
2010.02.22 at 10:03:57:733: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Exit
2010.02.22 at 10:03:57:735: Thread-20: B2B - (DEBUG) MimePackaging:unpack:Exit
2010.02.22 at 10:03:57:738: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Decode the Incoming Message into B2B Message
2010.02.22 at 10:03:57:740: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Enter
2010.02.22 at 10:03:57:743: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Number of Components = 1
2010.02.22 at 10:03:57:746: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage Transport Protocol = {HTTP}
2010.02.22 at 10:03:57:749: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage remote host name = null
2010.02.22 at 10:03:57:752: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage host name = null
2010.02.22 at 10:03:57:754: Thread-20: B2B - (DEBUG) calling setInitiatingPartyId() changing from null to TPName: null Type: Generic Identifier Value: 127.0.0.1
2010.02.22 at 10:03:57:757: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage fromParty = 127.0.0.1
2010.02.22 at 10:03:57:760: Thread-20: B2B - (DEBUG) calling setFromPartyId() changing from null to TPName: null Type: Generic Identifier Value: 127.0.0.1
2010.02.22 at 10:03:57:762: Thread-20: B2B - (DEBUG) calling setToPartyId() changing from null to TPName: null Type: Generic Identifier Value: 127.0.0.1
2010.02.22 at 10:03:57:764: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage security info NULL
2010.02.22 at 10:03:57:767: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Exit
2010.02.22 at 10:03:57:770: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Enter
2010.02.22 at 10:03:57:772: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage toTP 127.0.0.1
2010.02.22 at 10:03:57:775: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage hubUrl null
2010.02.22 at 10:03:57:777: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Exit
2010.02.22 at 10:03:57:779: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage ProtocolCollabId = null
2010.02.22 at 10:03:57:781: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage CollaborationName null
2010.02.22 at 10:03:57:784: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Enter
2010.02.22 at 10:03:57:786: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate check non-RosettaNet Message
2010.02.22 at 10:03:57:800: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Exit
2010.02.22 at 10:03:57:803: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Protocol Collaboration Id : null
2010.02.22 at 10:03:57:805: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument Enter
2010.02.22 at 10:03:57:893: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument errcode = SetData failed - CECToolsException thrown - HRESULT[30005], description[The size of blob is wrong: must be greater then zero]
2010.02.22 at 10:03:57:897: Thread-20: B2B - (ERROR) com.edifecs.shared.jni.JNIException: SetData failed - CECToolsException thrown - HRESULT[30005], description[The size of blob is wrong: must be greater then zero]
at com.edifecs.shared.jni.xdata.INativeToXData.SetDataNative(Native Method)
at com.edifecs.shared.jni.xdata.INativeToXData.SetData(Unknown Source)
at com.edifecs.shared.jni.xdata.INativeToXData.SetData(Unknown Source)
at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.identifyIncomingDocument(EDIDocumentPlugin.java:367)
at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3226)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2384)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1827)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:976)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
at java.lang.Thread.run(Thread.java:534)
2010.02.22 at 10:03:57:900: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument Enter
2010.02.22 at 10:03:57:956: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument non-XML Payload
2010.02.22 at 10:03:57:958: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument iDoc ECS = null
2010.02.22 at 10:03:57:961: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument continuing
2010.02.22 at 10:03:57:964: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument non-XML Payload
2010.02.22 at 10:03:57:967: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument iDoc ECS = null
2010.02.22 at 10:03:57:970: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument could not get start pos
2010.02.22 at 10:03:57:972: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument could not get end pos
2010.02.22 at 10:03:57:975: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument non-XML Payload
2010.02.22 at 10:03:57:978: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument iDoc ECS = null
2010.02.22 at 10:03:57:981: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument continuing
2010.02.22 at 10:03:57:983: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument non-XML Payload
2010.02.22 at 10:03:57:986: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument iDoc ECS = null
2010.02.22 at 10:03:57:988: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument could not get start pos
2010.02.22 at 10:03:57:990: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument could not get end pos
2010.02.22 at 10:03:57:993: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument Exit
2010.02.22 at 10:03:58:000: Thread-20: B2B - (ERROR) Error -: AIP-50083: Document protocol identification error
at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3245)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2384)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1827)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:976)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
at java.lang.Thread.run(Thread.java:534)
2010.02.22 at 10:03:58:004: Thread-20: B2B - (ERROR) Error -: AIP-50083: Document protocol identification error
at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3245)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2384)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1827)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:976)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
at java.lang.Thread.run(Thread.java:534)
2010.02.22 at 10:03:58:006: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Enter
2010.02.22 at 10:03:58:009: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Enter
2010.02.22 at 10:03:58:011: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error message is Error -: AIP-50083: Document protocol identification error
2010.02.22 at 10:03:58:013: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired Enter
2010.02.22 at 10:03:58:016: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired {Date=Mon, 22 Feb 2010 16:03:57 GMT, X-Powered-By=ASP.NET, Server=Microsoft-IIS/6.0, Content-Length=0}
2010.02.22 at 10:03:58:018: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired returning false
2010.02.22 at 10:03:58:021: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException FA not required
2010.02.22 at 10:03:58:024: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Error Message: Error -: AIP-50083: Document protocol identification error
2010.02.22 at 10:03:58:027: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2010.02.22 at 10:03:58:030: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message found
2010.02.22 at 10:03:58:032: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
2010.02.22 at 10:03:58:036: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState enum0 not null
2010.02.22 at 10:03:58:040: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message error information
2010.02.22 at 10:03:58:054: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message protocol message id
2010.02.22 at 10:03:58:061: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message payload storage
2010.02.22 at 10:03:58:087: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new business message
2010.02.22 at 10:03:58:089: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
2010.02.22 at 10:03:58:129: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty name null
2010.02.22 at 10:03:58:132: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty type and value Generic Identifier127.0.0.1
2010.02.22 at 10:03:58:187: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow BusinessAction for the given name null null
2010.02.22 at 10:03:58:242: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
2010.02.22 at 10:03:58:277: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
2010.02.22 at 10:03:58:280: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Native Event Tbl Row
2010.02.22 at 10:03:58:282: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
2010.02.22 at 10:03:58:295: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateNativeEvtTblRow msgInfo.id = 0A10482B126F66BB0BC000001BE47920
2010.02.22 at 10:03:58:298: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
** DbAccess:updateNativeEvtTblRow:tip_wireMsg protocolCollabID = null
2010.02.22 at 10:03:58:307: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException notifying App
2010.02.22 at 10:03:58:311: Thread-20: B2B - (DEBUG) Engine:notifyApp Enter
2010.02.22 at 10:03:58:324: Thread-20: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0A10482B126F66BB08B000001BE47910</b2bMessageId>
<errorCode>AIP-50083</errorCode>
<errorText>Document protocol identification error</errorText>
<errorDescription>
<![CDATA[Machine Info: (usstlz-pinfwi25.dev.emrsn.org)
Description: Unable to identify the document protocol of the message
StackTrace:
Error -: AIP-50083: Document protocol identification error
at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3245)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2384)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1827)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:976)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
at java.lang.Thread.run(Thread.java:534)
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2010.02.22 at 10:03:58:344: Thread-20: B2B - (DEBUG) Engine:notifyApp Exit
2010.02.22 at 10:03:58:347: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updated the Error Message Successfully: Error -: AIP-50083: Document protocol identification error
2010.02.22 at 10:03:58:350: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Exit
2010.02.22 at 10:03:58:352: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Exit
2010.02.22 at 10:03:58:355: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:postTransmit Exit
2010.02.22 at 10:03:58:358: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Exit
2010.02.22 at 10:03:58:360: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequest Exit
2010.02.22 at 10:03:58:363: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage:
Edited by: B2B_GoToGuY on Feb 23, 2010 4:57 AM -
Settlement G/L account Error in CJ88 Transaction
Hi
i am receiving error in CJ88 transaction when I am trying to settle cost. I have created default settlement rule on WBS by enhancement, The G/L Account is also balancesheet account. Error message-- G/L account is not assigned to controlling area.
Please suggest the soulution. ThanksHi,
Can you elaborate the error in detail,
You want settle the WBS to GL right?
The GL which you are setting the same GL is getting error.
You have checked the GL in FS00 or FSP0, If you have not checked in FS00 then check in FSSo whether it is extended to Company code. -
hi,
I am getting following error in MIRO transaction ....Can anybody please fix this ?
"In company code 3000, the number range 51 is missing for the year 2008"
Regards
VijayHI,
Please check the nuber ranges whether that has been selected as external for the Invoicing.
If external then please check whether the said no range starting from 51 is included in the external no assignment or no?
If not then yiu may have to add the same no range and then check.
Hope this helps.
Regards,
Prasanna
Award pls if helpful. -
Exit\badi for check MR8M transaction BUDAT field
hello expert,
I must check the field RBKP_V-BUDAT of the MR8M transaction. there is a user-exit\badi to do it?
thanks in advance.Yes, it's custom, below is the documentation :
HY SIMGINVOICE_UPDATE
Interface name : IF_EX_INVOICE_UPDATE.
method IF_EX_INVOICE_UPDATE~CHANGE_AT_SAVE
Use
You can use the business add-in (INVOICE_UPDATE) to further process the
following functions or, if necessary, forbid them:
o Creating invoices (invoices, credit memos, subsequent debits,
subsequent credits) in Logistics Invoice Verification
o Parking documents in Logistics Invoice Verification, and making
changes to these documents, for example, deleting them
Standard settings
The business add-in is not active in the standard system. -
Error "Balance in transaction currency" using T.code J1iex
Hello all,
When i am capturing an excise invoice using T.code J1iex, the excise invoice is getting captured, but when we are trying to post the vendor using the same T.code j1iex,it is giving an error"Balance in transaction currency". Please help me and try to solve my problem asap.Hai,
1.Flag the check box for rounding duty on procurement in IMG - Logisitics general - Tax on goods & mvts - India - Basic settings - Company code settings.
2. Manually round off the excise values to next value in J1IEX - Change mode - item level - excise values. -
I have an package with source , data flow and destination to execute on begin and commit.
in the below i have just used for questioning purpose with diagram removing my Data Flow task explaining my problem
on execution, i get error as
[Execute SQL Task] Error: Executing the query "COMMIT TRAN DimCompanyCode" failed with the following error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.". Possible failure reasons: Problems with the query, "ResultSet"
property not set correctly, parameters not set correctly, or connection not established correctly.
as mentioned , i have checked the ResultSet, parameters , connection establish.. all are fine.
Kindly advice on what has to be done.
ShanmugaRajTo avoid this error, the RetainSameConnection property should set to 'True' for the Connection Manager - Application_DB.
Narsimha -
Conversion error in J1IEX transaction
HI all,
We are doing upgrade from 4.6C to ECC 6.0. After upgrade, when we tried to execute the tcode J1IEX, it returns the following error.
That is, in J1IEX, we select Capture Excise Invoice -> Goods Receipt -> GR number. After entering this GR number and pressed ENTER key, we get the following error.
" Conversion error
Error analysis
The program has been interrupted and cannot resume.
Program "SAPLJ1IEX" attempted to display fields on screen 0200.
An error occurred during the conversion of this data.
How to correct the error
There was a conversion error in the output of fields to the screen.
The formats of the ABAP output field and the screen field may not match.
Some field types require more space on the screen than in the ABAP
program. For example, a date output field on the screen requires two
more characters than the corresponding field in the ABAP program. When
the date is displayed on the screen, an error occurs resulting in this
error message.
Screen name.............. "SAPLJ1IEX"
Screen number............ 0200
Screen field............. "J_1IEXITEM-AVB_CREDIT_QTY"
Error text............... "FX015: Sign lost."
Other data:
Pls help me in correcting this error.Hi all,
Is the DYNPRO_FIELD_CONVERSION error in J1IEX transaction (field conversion error in AVB_CREDIT_QTY field under "Exceise Invoice" tab) due to the negative value passed to this AVB_CREDIT_QTY screen field.
If so, how to correct the negative value problem? -
TIME_OUT Error in calling transaction IP10
Hi all,
I would like to ask help from you guys, i am currently handling an error when using transaction IP30 (RISTRA20). The program returns an error (Message No. 00341)stating that the "texts from the batch input are not output. Only a placeholder".
Hope anyone can help me figure this out.
Note: In Transaction IP30, Transaction IP10 is being called. The error arises at this point.
Thanks in advance!Hi John,
I dont know what transaction are you talking about...
But if it is TIME_OUT.... you need to check for any OSS Notes available for this problem.
If not send a product error message to SAP.
There cannot be anyother solution,,,, if it is time_out.
go ahead. -
Repository error:Error -: AIP-50143:Transaction Instance Not fo
Hi Ramesh,
The Scenario is as follows:
1. we are running a stub on WLI server(back end) which enques a message in to the JMS queue.
2.This JMS queue is used in the B2B internal delivery channel.
3.The message is coming to the B2B , however we are getting an error with the following message.
******ERROR*******
2008.10.31 at 16:29:35:289: Thread-27: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>AC1F755B11D528EE26C000001BDC0BC0</b2bMessageId>
<errorCode>AIP-50014</errorCode>
<errorText>General Error</errorText>
<errorDescription>
<![CDATA[Machine Info: (PUNIN1879164419)
Description: General Error
StackTrace:
Error -: AIP-50014: General Error: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1178)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:134)
at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:609)
at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:235)
Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3214)
at oracle.tip.adapter.b2b.msgproc.Response.outgoingResponse(Response.java:904)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1135)
... 3 more
Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:874)
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3211)
... 5 more
Caused by: Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.B2BWFEventManager.handleException(B2BWFEventManager.java:478)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.getTransactionInstance(CollabCatalogAccessor.java:364)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.setTransactionState(CollabCatalogAccessor.java:283)
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:871)
... 6 more
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2008.10.31 at 16:29:35:304: Thread-27: B2B - (DEBUG) Engine:notifyApp Exit
2008.10.31 at 16:29:35:304: Thread-27: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updated the Error Message Successfully: Error -: AIP-50014: General Error
******ERROR*******
the screnario is working when we directly put the message on to the queue.
Please help .
Thanks & Regards
Sachin (Infosys Team)Please refer Re: AIP-50025: Repository error ?
Regards,
Sinkar
[From Ramesh Team] -
Hi,
Hi Ramesh,
The Scenario is as follows:
1. we are running a stub on WLI server(back end) which enques a message in to the JMS queue.
2.This JMS queue is used in the B2B internal delivery channel.
3.The message is coming to the B2B , however we are getting an error with the following message.
******ERROR*******
2008.10.31 at 16:29:35:289: Thread-27: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>AC1F755B11D528EE26C000001BDC0BC0</b2bMessageId>
<errorCode>AIP-50014</errorCode>
<errorText>General Error</errorText>
<errorDescription>
<![CDATA[Machine Info: (PUNIN1879164419)
Description: General Error
StackTrace:
Error -: AIP-50014: General Error: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1178)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:134)
at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:609)
at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:235)
Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3214)
at oracle.tip.adapter.b2b.msgproc.Response.outgoingResponse(Response.java:904)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1135)
... 3 more
Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:874)
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3211)
... 5 more
Caused by: Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.B2BWFEventManager.handleException(B2BWFEventManager.java:478)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.getTransactionInstance(CollabCatalogAccessor.java:364)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.setTransactionState(CollabCatalogAccessor.java:283)
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:871)
... 6 more
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2008.10.31 at 16:29:35:304: Thread-27: B2B - (DEBUG) Engine:notifyApp Exit
2008.10.31 at 16:29:35:304: Thread-27: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updated the Error Message Successfully: Error -: AIP-50014: General Error
******ERROR*******
the screnario is working when we directly put the message on to the queue.
Please help .
Thanks & Regards
Sachin (Infosys Team)Please refer Re: AIP-50025: Repository error ?
Regards,
Sinkar
[From Ramesh Team] -
Hi Experts,
I am having errors on launch transaction in QAS. The errors I am getting are:
1) Mapped logical system KDVCLNT100 not defined. For this(I creataed a condition in class for DEV and QAS), Class created is included in zpackage and transported to QAS
2)Cannot determine logical system.
3) Launch transaction YBP_ERP_TX_IW51 not defined.
4) Launch transaction not defined Execution not possible.
Tranport done was successfull and I have checked the nav bar profile and it is ok.
Please give suggestion.
Thanks,
ShahidHi,
You need to maintain necessary settings in transaction crms_ic_cross_sys. Maintain the information for OWNLOGSYS, it needs to be maintained in every system as a manual entry.
Regards
Prasenjit
Maybe you are looking for
-
Problem when installing boXIwin_sp3
Hi, I am trying to install the patch boXIwin_sp3 In installation start good, stop the services. During the backup of the orginal files, the installation stop without any error. Can somebody help me?
-
Smartform output ( printout ) is not the same as the preview
Dear Freinds, I have developed smartform , iam able to get data very much clear font and the design . However when i running the smart form through repot to give print using the Output Device Locl or LP01. I can see the output is not coming in the pr
-
Elements 10 / Folder Mode sorts files in "file name" order; is there a way to do this in Elements 11
-
Change scaling for a graph included in an HTML report
I have an array included as a graph in a TestStand HTML report. It is a one dimesion array of 1000 elements. The array is filled by a custom 'C' code step (voltage reading from a Scope), based on the NI Example "DisplayArrayInReport". Is it possable
-
Actually, my iphone was hanged and its screen was not working at all .So, I updated its software from market but for reactivation it require icloud account but i didn't know how exactly it is and i was caught in big trouble . But i have its box and a