Error in MSS-Create Requisition Request, form ISR_MSSRCF_SRQ3

Hi,
We are trying to configure MSS app, create requisition request using standard adobe form ISR_MSSRCF_SRQ3.
We have configured standard HCM process HR_MSSRCF_REQUISITION for it. When entering all
the mandatory fields in the form and clicking on 'check and send' , it displays an error
"you must enter a requisition title'
although we have already entered req. title in the field.
Anyone faced this issue before?
Please provide your inputs...
regards,
Smit

Hello smit ,
You can find out the enhancement ( BADI defnition ) that corresponds to MSS Requisition request .
Debugging the same will let you know why the error is coming .
You could also be due to config done under MSS -> recruitment.
hope this helps.
thanks,sahiba

Similar Messages

MSS-Create Requisition Request -Error in Adobe Form

Hi all,
We are trying to configure MSS -> create requisition request using standard adobe form ISR_MSSRCF_SRQ3.
We have configured standard HCM process HR_MSSRCF_REQUISITION for it. When entering all
the mandatory fields in the form and clicking on 'check and send' , it displays an error
"you must enter a requisition title'
although we have already entered req. title in the field.
Anyone faced this issue before?
Please provide your inputs...

What was the solution finally? Would be glad if you could share.
Many thanks.

E-recruiting under MSS create requisition request EHP4

Dear Team,
We are facing the following problem.
when manager with the role (SAP_RCF_MANAGER) is trying to create the requisition request in back end it is always showing no data available (select employee->select processes). Edit button has been disabled due to "no data available" error.
System details backend EHP4
service pack 13 EAHR 604
in our system we do not have manager groupings related nodes as it is EHP4.
Plesae suggest the solution. thanks in advance.
regards,
badarinarayana.

dear Team
Any body worked on MSS for E-rec.
Request you to please let us know any solution for the mentioned problem .
regards
Badarinarayana

Problem in MSS - Create Requisition

Hi All,
We implementing E Recruitment on EHP4 sp4. we are facing a strange issue in the MSS-Create requisition request scenario.
We are using standard HCM process HR_MSSRCF_REQUISITION.
MSS user is able to create a requisition and send to his manager for approval. His manager can also approve it. But once the requisition is finally approved, the recruiter cannot see
the requisition in the recruiter dashboard
We have checked the workflow log, its finishing without errors.The e-rec infotype table HRP5131 does not have any new entries for Otype NB, But Manager can see his requisitions from MSS-Requisition Overview iview as completed.
Pls let me know if any config is missing? Do we need to run any background job to update the e-rec tables? There's no error message in any stage of process..still recruiters can't see the new requisition.
Regards,
Smit

Dear Smit,
We are implementing E-recruitment in our Project. We are facing problems with Manger creating requisition page. Its always displaying NO data available.
Can you please let us know if any configuration is to be done for it?
Thanks a lot in advance,
Regards,
Sai

E-REC EHP5 - Prerequisites for MSS user for Create Requisition request

We are implementing E-REC EHP5. As a MSS user when line manager tries to create requisition request on portal, although it takes on a new page called "Stat Processes" we are getting error "no data available" and hence can not proceed on that page. We have assigned R3 role "SAP_RCF_REQUISITION_REQUESTER" to the line manager and on portal we have assigned him MSS user role.
Is there any other prerequisite for the said functionality of Create Requisition request.

Hi,
In the IMG, navigate to :
Personnel Management -> HR Administrative Services -> Configuration of Forms/Processes -> Process Configuration
-> IMG activity "Test Process"
Enter the process name "HR_MSSRCF_REQUISITION" and execute (F8). You should see the form scenario data in table view. Use the F4 help in the "Field Value" column for those entries where the "Value Help" column is checked. You should get a pop-up with the field values. If not you need to make sure that HR_MSSRCF_REQUISITION iis linked to form scenario S_HRMSSRCF_REQUISITION in table T5ASRPRSCFORM. Also make sure that you have the last SP for the ERP common parts BP 1.51 installed in your portal. Finally assign role SAP_RCF_RECRUITER_ERC_CI_2 and SAP_RCF_MANAGER to your recruiter.
Hope it helps,
Kind Regards
Christine

Process group R001 does not exist in MSS for Create Requisition Request.

Hi All
In MSS Under Recruiting we have a link called Requisition Request under this we have Create Requisition Request.
On clicking on this link Create Requisition Request link
i am getting "Process group R001 does not exist "
Pls provide me your input
Regards
Karthi D.

A "Process Group" is part of HCM Processes and Forms....it is how you define which processes can be started/initiated by which Processor Roles. This is done under the configuration under HCM Processes and Forms which is within "HR Administrative Services" (HRAS). In your case, the "manager" processor role would have that process available as part of their process group. Check there.

How to hide "Create Requisition Request" link in MSS

Hi All
How to hide "Create Requisition Request" link which is in Recruiting services in MSS?
Rgrds
Sri

Hello,
Create Requisition Request is triggered by Home Page framework service MSS_HCM_RECRUITING_NEWREQ_REQUEST.
In order to deactivate it, in customizing:
SPRO-IMG:
Cross-Application Components
Homepage Framework
    Services
      Assign Services to Subareas
On the entry :
MSS_HCM_RC_REQREQUEST     MSS_HCM_RECRUITING_REQ_STATUS_OV     20
You can set the position as blank, so it will not show up. You can also delete this entry.
Regards,
Bentow.

Create Requisition Request - MSS (Start Process Grey Out-No Data available)

Hello All
We are using SRQ2 extended requesition request. Currentlt i am on Devlopment system and just want to see the standard requistion request from MSS so that later i can make a Z copy and customize
Now when i logged in as a Manager and click on the "Create Requisition Request" from recruiting role it's opening and showing me the Start Process window and everything is non editable and showing me that No Data Avaialble
Is there any config missing for this
Also when is see the SRQ2 from SPRO "Define Own Scenarios for Request to Change Master Data" node i made the SRQ2 application as H and aslo tried. But nothing useful.
Can any one tell me any configuration missing or any other things

Solved.
Problem was in MSS the Ehp4 links for erecruiting refers to SRQ3. So i had to pull the iviews from MSS 1.31 BP which will be Webdynpro Java

Error message while creating Appropriation Request

Hey there,
I am getting Error message while creating Appropriation Request.
I have done all the confiig according to SAP Best Practices U30 Investment Management.
When going into transaction IMA11(Create an AR) I can full in all fields but as soon as I click on the Control Tab I get a Run time error. Also when attempting to save the AR without clicking on the Control tab I get this message.
Any help would be greatly appreciated
RAISE_ exception
Runtime Errors         RAISE_EXCEPTION
Date and Time          18.07.2011 07:15:07
ShrtText
Exception condition "ERROR_IN_STATUS" raised.
What happened?
The current ABAP/4 program encountered an unexpected
     situation.
Error analysis
A RAISE statement in the program "SAPLAIA_TOOL" raised the exception
     condition "ERROR_IN_STATUS".
     Since the exception was not intercepted by a superior program
     in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
     Transaction SE37 (Function Library). You can take the called
     function module from the display of active calls.
Trigger Location of Runtime Error
     Program                                 SAPLAIA_TOOL
     Include                                 LAIA_TOOLU11
     Row                                     119
     Module type                             (FUNCTION)
     Module Name                             AIA_TOOL_GET_STATUS
Source Code Extract
Line SourceCde
89 *                TYPE       = SY-MSGTY
    90 *                CL         = SY-MSGID
    91 *                NUMBER     = SY-MSGNO
    92 *                PAR1       = SY-MSGV1
    93 *                PAR2       = SY-MSGV2
    94 *                PAR3       = SY-MSGV3
    95 *                PAR4       = SY-MSGV4
    96 *           IMPORTING
    97 *                RETURN     = ls_return.
    98 *   endif.
    99 *   if not ls_return is initial.
   100 *      append ls_return to return.
   101 *      raise error_in_status.
   102 *   endif.
   103 *
   104 * Füllen der Ausgabetabellen
   105    perform fill_output_tables tables lt_status
   106                                      lt_jsto
   107                                      et_appreq_status
   108                                      et_appreqvarnt_status
   109                                      et_appreq_user_status
   110                                      et_appreqvarnt_user_status
   111                                      lt_objnr
   112                                      lt_objnr_varnt
   113                                      lt_return
   114                               using i_language
   115                                      i_with_text.
   116
   117    if not lt_return[] is initial.
   118       append lines of lt_return to return.
>>>>>       raise error_in_status.
   120    endif.
   121
   122
   123 ENDFUNCTION.

Hi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB

Create Requisition Request

Hi everybody!
We are trying to find the way to complete the iimplementation for the process of the iView Create Requisition Request. Does somebody have a customizing manual for the ECC System?
Thanks in advance.
Jesús.

Dear Jesus,
can you be more specific?
For while you can try the google search bellow:
http://www.google.com/search?q=site%3Asap.comcustomizingECC+System
Please remember to evaluate the replays, this incentive the SDN to keep growing,
regards,
Fabio
Edited by: Fabio Sarmento on Feb 16, 2011 3:11 PM

SCCM 2012 Client Error Failed to create registration request body. Error: 0x80070057

Hi,
While installing sccm 2012 R2 Client on server 2008 R2 ClientManagerStartup.log shows below error
Failed to create registration request body. Error: 0x80070057
Kiran

Torsten is right, please post the entire ccmsetup.log and client.msi.log.
Daniel Ratliff | http://www.PotentEngineer.com

Hiring Manager in MSS Create Requisiton Request

Hi,
When creating a requisition request you can enter HIRING MANAGER in the pdf-form. Then after the form has been through the approval at the upper-manager and approved, the value from the field HIRING MANAGER is not transferred to the requisition's field "Hiring Mangager" under Basis Data that the Recruiter can see on the Recruiter's Dashboard: Requisitions in the Recruiter role.
My question is whether it is meant like this and HIRING MANAGER in the pdf-form is only used for finding the manager in the workflow (for the rule)? Or it is an error?
We are using BP for MSS EhP4 SP04 + ERECRUIT 604 SP04 + BP for MSS 1.41 SP04+ BP for Recruiter 1.40 SP04 + HCM_ERC_CI_3 + HCM_MSS_ERC_CI_1.
Best regards,
Beata

Hello smit ,
You can find out the enhancement ( BADI defnition ) that corresponds to MSS Requisition request .
Debugging the same will let you know why the error is coming .
You could also be due to config done under MSS -> recruitment.
hope this helps.
thanks,sahiba

Problem in Create Requisition Request E-recruitment

Hi,
I have configured the standard workflow WS45600028 for the E-recruitment process in HR administration services and able to trigger the workflow successfully when I create requisition in the portal.
But the workflow fails at the first step 'Import the form data' since the method CL_HRASR00_WF_COMPONENTS-->DATAMAPPING)raises an exception when there are no entries in table T5ASRSCENARIOS.
The case configuration is absolutely fine but yet am unable to figure out why any entries aren't created in the table T5ASRSCENARIOS.
How the first entries are created in table T5ASRSCENARIOS? Is it through customising?
Quick response will be highly appreciated.
Thanks,
Roopesh

Inputs will be highly appreciated.
Thanks,
Roopesh

How to create software request form using Info path functionality?

Hi All,
i am trying to create a Software Request Form using Info path functionality. Following are the steps:
1. Users will fill out the form with all necessary fields.
2. once they click on Submit button, it will send an email to two specific groups with a link so that they can see the form and Approve/Deny or can put comments on that.
Thanks in advanced!

Hi Rakib,
There are many ways you can achieve this.
Either by Creating a SharePoint list and then modify it using InfoPath to get all your required fields added
or
Use InfoPath application and select any template or blank form template to get all your required fields added and then publish it to SharePoint site
For the second step you can create an OOTB workflow which can send email to view an approve items using Approval workflow feature
For the advance notification you can use SPD workflows as well.
Refer this article for more on InfoPath and SPD integration - http://gallery.technet.microsoft.com/office/Step-By-Step-build-30f84363
Let us know if this helps, thanks
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Error in MSS HCM Processes and Forms Overview

Hi all,
Currently we are working on ESS/MSS from NW 7.3 portal.
When i open HCM Processes and Forms Overview from MSS, it prompt me to change the password again and again.
And on some user HCM Processes and Forms Overview not shown properly.
Error while processing your query
What has happened?
The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
Note
The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .
The error occurred on application server MUMSAP02_BEQ_00 and in work process 8 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
What can I do?
If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 8 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 350 -u: ISHAJI -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 8 -d: 20130514 -t: 133514 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF8DA00F61FBEAC0_D4AE5218F8121ED2AF8DA00F5D19EAC0_1 -x: 006DBCE20F7BF1E58AC0D4AE5218F812
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please suggest me the solution.
Regards,
Devendra

Dear Andrea,
I reset the password of backend user and gave sap_all and sap_new role.
Last time it prompt the screen in mss as to change the password. (See above screen shot).
But after reset the password...error showing instead of login screen in mss as below:
Error while processing your query
What has happened?
The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
Note
The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .
The error occurred on application server MUMSAP02_BEQ_00 and in work process 7 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
   What can I do?
If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 7 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 350 -u: IKHASU -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 7 -d: 20130514 -t: 175940 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF923E065A39EAC0_D4AE5218F8121ED2AF923E394271EAC0_1 -x: F091BCE2D132F1D58AC0D4AE5218F812
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
I checked log in ST22 as below
What happened?
    The exception 'CX_PARAMETER_INVALID_RANGE' was raised, but it was not caught
     anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_ABAP_TSTMP=================CP' has to be
    terminated.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_PARAMETER_INVALID_RANGE', was not
     caught in
    procedure "SUBTRACT_TIMESTAMPS" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Parameter has invalid value: Parameter TSTMP1 has invalid value 0.
Regards,
Devendra

Error in MSS-Create Requisition Request, form ISR_MSSRCF_SRQ3

Similar Messages

Maybe you are looking for