Error in my I pad during charging

Dear Apple support team,
Kindly need your assist to check the error in my I pad during charging,
The attached shown the power volume is 17% and the charging is complete( with Arabic languages),
What's make the I pad can't starting up.
Your checking will be highly  appreciated.

Most of the people on here are fellow users, not Apple.
I can't see your screenshot, but have you tried a soft-reset to see if it charges and/or the indicator updates after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

  • I pad not charging

    When i plug charging cord to I pad not charging or takes a long time to charge.not making full connetion,no sound when connecting to I pad.

    Are you using the wall charger?
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    And this - Unplug the charger from the iPad and then replug. May resume charging.
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • HT4060 my new pad is charging upto 2% and then it not charging... looking for a solution

    my new pad is charging upto 2% and then it not charging... looking for a solution

    Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
    http://support.apple.com/kb/TS2802
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • My IPad tries to boot automatically during charging.

    My IPad tries to boot automatically during charging. The booting progress ends at the 'Apple' page by switching the pad off due to a low power status. After a few seconds the progress starts from the beginning. The Pad is charged by the power adapter and i already tried a recovery with itunes

    Hey there Abare7,
    It sounds like you unable to boot your iPad successfully as it keeps turning off with the battery life screen. I recommend the troubleshooting in the article named:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue is persists, please contact Apple Support.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Error when starting parser: timeout during allocate / CPIC-CALL:'TfSAPCMRC'

    Hello experts.
    When I try to preview or refresh a Crystal Report document built on a BEx query I get the following error msg:
    Database connector error: BAPI Error #0. Error when starting parser: timeout during allocate / CPIC-CALL: 'TfSAPCMRCV'.
    We have done as suggested in "SAP Note 1032461 - MDX parser does not start", but without success.
    This is what we've tried so far:
    replaced the file "librfc32.dll" (in C:\Windows\System32 and C:\Windows\SysWOW64)  with the new version mentioned in Note 413708.
    tested the connection in SM59 - non successful
    tested the report query with transaction MDXTEST - non successful
    tried to start the mdxparser manually on server - non succesful, error msg: "The application failed to initialise.."
    We have the following config:
    MS server 2003 SP2 x64 ed.
    SAP logon 7.20
    MS SQL server 2005
    CR 2008
    new librfc32.dll version 7200.1.39.6461
    Any ideas on what to try next would be highly appreciated!
    Cheers, IngA

    Hi Ingo.
    We have only one application server.
    I registered the new version of the file C:\windows\SysWOW64\librfc32.dll with regsvr32.exe successfully. I've also tried to copy the new file to the same directory as the mdxsvr.exe-file is located, but it made no difference.
    Should I remove all other copies of librfc32.dll and only keep the one in folder C:\Windows\SysWOW64, or maybe register them all with regsvr32.exe?
    --IngA
    Edited by: Ingeborg Andreassen on Nov 5, 2010 10:36 AM

  • BP 6M BATTERY HEATING DURING CHARGING

    N73 BATTERY BP 6M BATTERY HEATING DURING CHARGING AND DISCHARCHING WITH IN HOURS FROM CHARGING ITS SIZE IS ALSO INCREASED

    If the batteries size has increased you should stop using it immediately. You are putting the phone at risk by using it.
    You should take it to a nokia care point as soon as possible.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.

  • Hard drive error: Some information was unavailable during an internal lookup

    I tried upgrading my hard drive on my 13" MacBook Pro (mid-2010)  to a solid state drive.  When I did, I encountered a problem where I could not boot from my internal drive.
    It boots fine from the external drive that I used to clone my old HHD.
    When I run repair disk in disk utility I get an error:
    Problems were encountered during repair of the partition map
    Error: Some information was unavailable during an internal lookup.
    Running repair disk on the external drive returns no errors.
    My first thought was I have a bad SATA cable.  After replacing the SATA cable, I am still having the problem.
    Anyone have any ideas on what could be the problem?  SATA Connector on the motherboard failed?
    Thanks in advance.

    I formatted it a Mac OS Extended (Journaled) using the Erase function in Disk Utility then copied the contents of my HD using Restore in Disk Utility.  It seemed to copy all of the contents correctly.  It boots from the external drive.
    The problem starts when I put it in the computer and try to boot internally.  It will not boot.  Also, my old HD will also not boot internally now either.

  • Firefox is very slow to respond when opening and nearly always stops responding altogether even refusing to react to Task Manager "End Program@ command. The "not responding@ error message also comes up during navigation on line.

    Firefox is very slow to respond when opening and nearly always stops responding altogether, even refusing to react to the Task Manager "End Program" command. The "not responding" error message also comes up during navigation on line. Several attempt have to be made to get on line. A loss of stability seems to be endemic at the moment.

    Try following the instructions here: [[Firefox hangs]]

  • Oracle ODBC  - Internal Error - unable to initialize NLS during driver load

    I'm having some trouble with my ODBC connections which I hope someone can please help me with!
    About 6 weeks ago all was working as normal.
    As far as I know there have been no updates to the ORacle DB, the Windows XP operating system or the ODBC Drivers.
    Today when I opened access and visual case 2 to connect to Oracle I was at first greeted with a:
    unable to connect SQLState=IM004 SQL_HANDLE_ENV
    error. ODBC also kept crashing.
    I restarted the computer and was confronted with a different error:
    odbc SQLSTate 08004 ORA 12154 TNS could not resolve the connect identifier specified
    I was able to fix this error by setting the environment variable TNS_ADMIN in windows xp environment variables. I'm extremely confused about how this happened though as it was working and I don't think anything has changed.
    I was then able to connect to the database via Microsoft Access but when I opened Visual Case 2 and tried to make an update, I was confronted with the following error:
    Oracle ODBC Driver - internal error - unable to initialize NLS during driver load
    I looked in the registry at:
    HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraClient10g_home1
    HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraClient10g_home2
    HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraDb10g_home1
    and NLS_LANG was set to "AMERICAN_AMERICA.WE8MSWIN1252" in all 3 places.
    (Though KEY_OraClient10g_home2 only had 4 entries as opposed to KEY_OraClient10g_home1's 13 entries)...
    Since I made those changes I can no longer connect through Access.
    I just receive a ODBC - connection to 'xxx' failed
    Advice greatly appreciated!!!!
    Edited by: user11150264 on Aug 25, 2009 10:21 PM

    Actually it sort of does...
    I switched the ODBC connection to use instant client and now it's all working again.
    The biggest mystery is what changed to make it suddenly stop working the old way...

  • ORA-01403: no data found Error in PLSQL code raised during plug-in processing.

    Hello OTN community,
    We are having the access to APEX problem. a New user was setup to access the APEX application. When I test to login as a new user, I get the message "ORA-01403: no data found Error in PLSQL code raised during plug-in processing.". When click OK to the disply message, the application will take me out of the sstem. I need help to even understand what is happening. I didn't develop the application, there is no documentation for this application, I am just supporting the application whenever there is a problem and I am new to APEX. As you can see I need help to figure this thing out. Your help is dearly appreciated.
    Thank you OTN

    Try to check the query that is executed and check if there is data or not

  • Error in backup of C:\ during read: Error [0x80070057] The parameter is incorrect.

    Hi,
    Im trying to backup a system state in windows server 2008 R2 HAPP02 using DPM 2010 and im recieving the following error.
    Source: Backup, Event ID 5
    The backup operation that started at '‎2011‎-‎09‎-‎19T06:08:29.143748400Z' has failed with following error code '2155347997'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
    I tried to run WBADMIN START SYSTEMSTATEBACKUP -backupTarget:c: and then i recieve the following error
    Creating a shadow copy of the volumes specified for backup...
    Creating a shadow copy of the volumes specified for backup...
    Please wait while system state files to back up are identified.
    This might take several minutes...
    Found (1113) files.
    Found (6575) files.
    Found (10393) files.
    Found (13356) files.
    Found (16175) files.
    Found (27117) files.
    Found (30612) files.
    Found (34342) files.
    Found (36966) files.
    Found (40656) files.
    Found (41935) files.
    Found (45428) files.
    Found (48639) files.
    Found (51805) files.
    Found (57721) files.
    Found (64792) files.
    Found (72735) files.
    Found (77340) files.
    Found (81183) files.
    Found (81254) files.
    Found (81254) files.
    Found (81254) files.
    The search for system state files is complete.
    Starting to back up files...
    The backup of files reported by 'Task Scheduler Writer' is complete.
    The backup of files reported by 'VSS Metadata Store Writer' is complete.
    The backup of files reported by 'Performance Counters Writer' is complete
    The backup of files reported by 'IIS Config Writer' is complete.
    Overall progress: 0%.
    Currently backing up files reported by 'System Writer'...
    Overall progress: 1%.
    Currently backing up files reported by 'System Writer'...
    Overall progress: 2%.
    Currently backing up files reported by 'System Writer'...
    Overall progress: 4%.
    Currently backing up files reported by 'System Writer'...
    Overall progress: 5%.
    Currently backing up files reported by 'System Writer'...
    Overall progress: 7%.
    Currently backing up files reported by 'System Writer'...
    Overall progress: 8%.
    Currently backing up files reported by 'System Writer'...
    Overall progress: 9%.
    Currently backing up files reported by 'System Writer'...
    Overall progress: 11%.
    Currently backing up files reported by 'System Writer'...
    Overall progress: 12%.
    Currently backing up files reported by 'System Writer'...
    Overall progress: 13%.
    Currently backing up files reported by 'System Writer'...
    Overall progress: 15%.
    Currently backing up files reported by 'System Writer'...
    Summary of the backup operation:
    The backup of the system state failed [2011-09-19 09:42].
    Log of files successfully backed up:
    C:\Windows\Logs\WindowsServerBackup\Backup-19-09-2011_09-36-37.log
    Log of files for which backup failed:
    C:\Windows\Logs\WindowsServerBackup\Backup_Error-19-09-2011_09-36-37.log
    The operation ended before completion.
    The parameter is incorrect.
    When i check the backup_error log file i found the following error
    Error in backup of C:\ during read: Error [0x80070057] The parameter is incorrect.
    Any ideas about the error?
    Thanks in advnace,
    Laith.

    sorry for the delay.
    This error condition has been found with Anti-virus software. 
    Use Msconfig to disable all antivirus services and Startup items [or uninstall temporarily] and test.
    Reviewing logs.
    [0]0ED8.124C::09/22/2011-14:05:02.204 [usa]HardWrite: NtWriteFile failure: 0xc000009d, 0xbb9ee000, 0x10000
    [0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::SetFormatStatus
    backup.cpp@4817] ERROR:Format was unable to complete successfully, final result: 57
    [0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::FormatMedia
    backup.cpp@4740] ERROR:Format on
    \\?\Volume{d841345f-e505-11e0-bb05-00155d646a25} failed.
    [0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::FormatMedia
    backup.cpp@4746] INFO:Format done
    [0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::MountVHD
    backup.cpp@15683] ERROR:FormatMedia
    \\?\Volume{d841345f-e505-11e0-bb05-00155d646a25} failed, hr: 0x80780046
    [0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
    BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
    [0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils CBlbImpersonationHelper::Revert
    BlbSecurityUtils.cpp@1215] INFO:No revert needed.
    [0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
    BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
    [0]ed8.124c 09/22/2011-14:05:02.208 [service
    backup.cpp@15702] EXIT: CBlbBackupAsync::MountVHD
    [0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::CreateVHD
    backup.cpp@9127] ERROR:MountVHD failed for
    \\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963}\WindowsImageBackup\HEIAPP02\Backup 2011-09-22 135901\9f1ea685-a26b-11de-bbc7-806e6f6e6963.vhd failed hr=0x80780046
    [0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
    BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
    [0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils CBlbImpersonationHelper::Revert
    BlbSecurityUtils.cpp@1215] INFO:No revert needed.
    [0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
    BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
    [0]ed8.124c 09/22/2011-14:05:02.208 [service
    backup.cpp@9138] EXIT: CBlbBackupAsync::CreateVHD
    [0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
    BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
    [0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils CBlbImpersonationHelper::Revert
    BlbSecurityUtils.cpp@1215] INFO:No revert needed.
    [0]ed8.124c 09/22/2011-14:05:02.208 [blbengutils
    BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
    [0]ed8.124c 09/22/2011-14:05:02.208 [service
    backup.cpp@9592] EXIT: CBlbBackupAsync::PrepareTargetVolumesForSSB
    [0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::BackupToMediaForSSB
    backup.cpp@10379] ERROR:SSB call failed with hr=0x807800c5, detailed hr=0x80780046
    [0]ed8.124c 09/22/2011-14:05:02.208 [blbsrv
    restoresystemstate.cpp@131] ENTER: CBlbsrvSystemStateRestore::StopFileLogging
    [0]ed8.124c 09/22/2011-14:05:02.208 [blbsrv
    restoresystemstate.cpp@138] EXIT: CBlbsrvSystemStateRestore::StopFileLogging
    [0]ed8.124c 09/22/2011-14:05:02.208 [service
    backup.cpp@10449] EXIT: CBlbBackupAsync::BackupToMediaForSSB
    [0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::PerformSystemStateBackup
    backup.cpp@17287] WARNING:SSB operation unsuccessful with hr=0x80780046
    [0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbSystemStateBackupAsync::SetState
    systemstatebackup.cpp@1061] INFO:ENGINE STATE:BACKUP SYSTEM STATE:5
    [0]ed8.124c 09/22/2011-14:05:02.208 [service CBlbBackupAsync::PerformSystemStateBackup
    backup.cpp@17300] INFO:Backup has system state = 0
    [0]ed8.124c 09/22/2011-14:05:02.208 [service
    backup.cpp@17306] EXIT: CBlbBackupAsync::PerformSystemStateBackup
    [0]ed8.124c 09/22/2011-14:05:02.208 [service
    backup.cpp@17331] ENTER: CBlbBackupAsync::UpdateBackupInfoIfRequired
    [0]ed8.124c 09/22/2011-14:05:02.208 [service
    backup.cpp@17379] EXIT: CBlbBackupAsync::UpdateBackupInfoIfRequired
    [0]ed8.124c 09/22/2011-14:05:02.208 [componenthelper
    componentbackuphelper.cpp@1456] ENTER: CBlbComponentBackupHelper::BackupComplete
    [0]ed8.124c 09/22/2011-14:05:02.208 [componenthelper CBlbComponentBackupHelper::BackupComplete
    componentbackuphelper.cpp@1460] INFO:bIsBackupFailed: 0
    [0]ed8.124c 09/22/2011-14:05:02.208 [componenthelper
    componentbackuphelper.cpp@1261] ENTER: CBlbComponentBackupHelper::BuildSppBackupCompleteStateArray
    [0]ed8.124c 09/22/2011-14:05:02.208 [componenthelper
    componentbackuphelper.cpp@1323] EXIT: CBlbComponentBackupHelper::BuildSppBackupCompleteStateArray
    [0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]ENTER: CVssAsrAPIBackup::GetVolumeComponents
    [0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]ENTER: AsrGetSystemVolumeDevPath
    [0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]EXIT: AsrGetSystemVolumeDevPath
    [0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]ENTER: BootGetWinREVolGuid
    [0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]ENTER: _GetElementData
    [0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn][WPP_ASR_ERROR] NT STATUS ERROR 0xc0000225(STATUS_NOT_FOUND) [status]: (bootlib.cpp:497)
    [0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]EXIT: _GetElementData
    [0]0F3C.0EE0::09/22/2011-14:05:02.427 [asrcmn]EXIT: BootGetWinREVolGuid
    [0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
    [0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrsys][WPP_ASR_INFO]Disk
    \\?\Volume{9f1ea685-a26b-11de-bbc7-806e6f6e6963} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
    [0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
    [0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
    [0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrsys][WPP_ASR_INFO]Disk
    \\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
    [0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
    [0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
    [0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrsys][WPP_ASR_INFO]Disk
    \\?\Volume{d513444f-a276-11de-b33e-00155d663512} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
    [0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
    [0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrwriter][WPP_ASR_INFO]cComponents = 3 , cMaxComponents = 5 (asrwriterbackup.cpp:602)
    [0]0F3C.0EE0::09/22/2011-14:05:02.428 [asrcmn]EXIT: CVssAsrAPIBackup::GetVolumeComponents
    [0]0F3C.0EE0::09/22/2011-14:05:02.429 [asrcmn]ENTER: CVssAsrAPIBackup::GetDiskComponents
    [0]0F3C.0EE0::09/22/2011-14:05:02.429 [asrcmn]ENTER: DiskListInitialize
    [0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: GetDriveTypeByHandle
    [0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: GetDriveTypeByHandle
    [0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
    [0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrsys][WPP_ASR_INFO]Disk
    \\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
    [0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
    [0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: GetDriveTypeByHandle
    [0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: GetDriveTypeByHandle
    [0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: AsrVhd::GetDeviceDependencyInformation
    [0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrsys][WPP_ASR_INFO]Disk
    \\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} is not a virtual device. Status=3225026581 (asrvhd.cpp:436)
    [0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: AsrVhd::GetDeviceDependencyInformation
    [0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: DiskListInitialize
    [0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: DiskListMarkClusteredDisks
    [0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]EXIT: DiskListMarkClusteredDisks
    [0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: DiskListPopulateLayoutInfo
    [0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrsys][WPP_ASR_INFO]Getting disk info:
    \\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} (asrbkup.cpp:1415)
    [0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: AsrpGetDiskLayout
    [0]0F3C.0EE0::09/22/2011-14:05:02.478 [asrcmn]ENTER: DiskForceDriversSync
    [0]0F3C.0EE0::09/22/2011-14:05:02.709 [asrcmn]EXIT: DiskForceDriversSync
    [0]0F3C.0EE0::09/22/2011-14:05:02.709 [asrcmn]ENTER: AsrpGetMorePartitionInfo
    [0]0F3C.0EE0::09/22/2011-14:05:02.709 [asrcmn]ENTER: GetRdisk0DeviceNumber
    [0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]EXIT: GetRdisk0DeviceNumber
    [0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]ENTER: AsrGetSystemVolumeGlobalRootPath
    [0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]ENTER: AsrGetSystemVolumeDevPath
    [0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]EXIT: AsrGetSystemVolumeDevPath
    [0]0F3C.0EE0::09/22/2011-14:05:02.710 [asrcmn]EXIT: AsrGetSystemVolumeGlobalRootPath
    [0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: DiskBuildDevicePartitionPath
    [0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: DiskBuildDevicePartitionPath
    [0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: MtMgrGetSymbolicNames
    [0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: MtMgrGetMountPoints
    [0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: MtMgrOpen
    [0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: MtMgrOpen
    [0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: MtMgrGetMountPoints
    [0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: MtMgrGetSymbolicNames
    [0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: AsrpGetMorePartitionInfo
    [0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]EXIT: AsrpGetDiskLayout
    [0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrsys][WPP_ASR_INFO]Disk device number=1 (asrbkup.cpp:1495)
    [0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrsys][WPP_ASR_INFO]Getting disk info:
    \\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} (asrbkup.cpp:1415)
    [0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: AsrpGetDiskLayout
    [0]0F3C.0EE0::09/22/2011-14:05:02.711 [asrcmn]ENTER: DiskForceDriversSync
    [0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]EXIT: DiskForceDriversSync
    [0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]ENTER: AsrpGetMorePartitionInfo
    [0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]ENTER: GetRdisk0DeviceNumber
    [0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]EXIT: GetRdisk0DeviceNumber
    [0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]ENTER: AsrGetSystemVolumeGlobalRootPath
    [0]0F3C.0EE0::09/22/2011-14:05:02.756 [asrcmn]ENTER: AsrGetSystemVolumeDevPath
    [0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: AsrGetSystemVolumeDevPath
    [0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: AsrGetSystemVolumeGlobalRootPath
    [0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: DiskBuildDevicePartitionPath
    [0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: DiskBuildDevicePartitionPath
    [0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrGetSymbolicNames
    [0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrGetMountPoints
    [0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrOpen
    [0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: MtMgrOpen
    [0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: MtMgrGetMountPoints
    [0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: MtMgrGetSymbolicNames
    [0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: DiskBuildDevicePartitionPath
    [0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: DiskBuildDevicePartitionPath
    [0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrGetSymbolicNames
    [0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrGetMountPoints
    [0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]ENTER: MtMgrOpen
    [0]0F3C.0EE0::09/22/2011-14:05:02.757 [asrcmn]EXIT: MtMgrOpen
    [0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: MtMgrGetMountPoints
    [0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: MtMgrGetSymbolicNames
    [0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: AsrpGetMorePartitionInfo
    [0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: AsrpGetDiskLayout
    [0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrsys][WPP_ASR_INFO]Disk device number=0 (asrbkup.cpp:1495)
    [0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: DiskListPopulateLayoutInfo
    [0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]ENTER: DiskListMarkOfflineDisks
    [0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrsys][WPP_ASR_INFO]Getting Online/Offline disk:
    \\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.1.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} (asrsys.cpp:233)
    [0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrsys][WPP_ASR_INFO]Getting Online/Offline disk:
    \\?\ide#diskvirtual_hd______________________________1.1.0___#5&35dc7040&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b} (asrsys.cpp:233)
    [0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: DiskListMarkOfflineDisks
    [0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]EXIT: CVssAsrAPIBackup::GetDiskComponents
    [0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]ENTER: CVssAsrAPIBackup::GetBcdComponent
    [0]0F3C.0EE0::09/22/2011-14:05:02.758 [asrcmn]ENTER: AsrGetSystemVolumeDevPath
    [0]0F3C.0EE0::09/22/2011-14:05:02.759 [asrcmn]EXIT: AsrGetSystemVolumeDevPath
    [0]0F3C.0EE0::09/22/2011-14:05:02.759 [asrcmn]ENTER: GetVolumeNameFromDeviceName
    [0]0F3C.0EE0::09/22/2011-14:05:02.759 [asrcmn]EXIT: GetVolumeNameFromDeviceName
    [0]0F3C.0EE0::09/22/2011-14:05:02.759 [asrcmn]EXIT: CVssAsrAPIBackup::GetBcdComponent
    [0]ed8.f68 09/22/2011-14:05:03.228 [service
    backup.cpp@3149] ENTER: CBlbBackupAsync::QueryStatus
    [0]ed8.f68 09/22/2011-14:05:03.228 [service
    backup.cpp@3209] ENTER: CBlbBackupAsync::QueryVolumeBackupStatus
    [0]ed8.f68 09/22/2011-14:05:03.228 [componenthelper
    componentbackuphelper.cpp@1850] ENTER: CBlbComponentBackupHelper::FillComponentConsistencyStatus
    [0]ed8.f68 09/22/2011-14:05:03.228 [componenthelper
    componentbackuphelper.cpp@1944] EXIT: CBlbComponentBackupHelper::FillComponentConsistencyStatus
    [0]ed8.f68 09/22/2011-14:05:03.228 [service
    backup.cpp@3342] EXIT: CBlbBackupAsync::QueryVolumeBackupStatus
    [0]ed8.f68 09/22/2011-14:05:03.228 [service
    backup.cpp@3359] ENTER: CBlbBackupAsync::QuerySystemStateBackupStatus
    [0]ed8.f68 09/22/2011-14:05:03.228 [service
    systemstatebackup.cpp@740] ENTER: CBlbSystemStateBackupAsync::QueryStatus
    [0]ed8.f68 09/22/2011-14:05:03.228 [service
    systemstatebackup.cpp@874] EXIT: CBlbSystemStateBackupAsync::QueryStatus
    [0]ed8.f68 09/22/2011-14:05:03.228 [service
    backup.cpp@3399] EXIT: CBlbBackupAsync::QuerySystemStateBackupStatus
    [0]ed8.f68 09/22/2011-14:05:03.228 [service
    backup.cpp@3192] EXIT: CBlbBackupAsync::QueryStatus
    [0]ed8.124c 09/22/2011-14:05:03.742 [componenthelper
    componentbackuphelper.cpp@1518] EXIT: CBlbComponentBackupHelper::BackupComplete
    [0]ed8.124c 09/22/2011-14:05:03.742 [service
    backup.cpp@6290] ENTER: CBlbBackupAsync::WriteBackupComponents
    [0]ed8.124c 09/22/2011-14:05:03.742 [blbengutils
    BlbSecurityUtils.cpp@1146] ENTER: CBlbImpersonationHelper::ImpersonateCaller
    [0]ed8.124c 09/22/2011-14:05:03.742 [blbengutils CBlbImpersonationHelper::ImpersonateCaller
    BlbSecurityUtils.cpp@1178] INFO:No impersonation done.
    [0]ed8.124c 09/22/2011-14:05:03.742 [blbengutils
    BlbSecurityUtils.cpp@1183] EXIT: CBlbImpersonationHelper::ImpersonateCaller
    [0]ed8.124c 09/22/2011-14:05:03.743 [util
    systemutils.cpp@709] ENTER: BlbutilRegReadDWORD
    [0]ed8.124c 09/22/2011-14:05:03.743 [util BlbutilRegReadDWORD
    systemutils.cpp@731] WARNING:RegQueryValueEx NoTargetSnapshot unsuccessful, hr:0x80070002
    [0]ed8.124c 09/22/2011-14:05:03.743 [util
    systemutils.cpp@749] EXIT: BlbutilRegReadDWORD
    [0]ed8.124c 09/22/2011-14:05:03.755 [blbengutils
    BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
    [0]ed8.124c 09/22/2011-14:05:03.755 [blbengutils CBlbImpersonationHelper::Revert
    BlbSecurityUtils.cpp@1215] INFO:No revert needed.
    [0]ed8.124c 09/22/2011-14:05:03.755 [blbengutils
    BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
    [0]ed8.124c 09/22/2011-14:05:03.755 [service
    backup.cpp@6444] EXIT: CBlbBackupAsync::WriteBackupComponents
    [0]ed8.124c 09/22/2011-14:05:03.755 [service
    backup.cpp@8946] ENTER: CBlbBackupAsync::UpdateLocalCatalogAfterbackup
    [0]ed8.124c 09/22/2011-14:05:03.755 [service
    backup.cpp@7790] ENTER: CBlbBackupAsync::GetComponentsList
    [0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
    componentbackuphelper.cpp@249] INFO:Component 'TasksStore' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
    [0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
    backup.cpp@7856] INFO:Adding component (0) <NULL>\TasksStore.
    [0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
    componentbackuphelper.cpp@249] INFO:Component 'WriterMetadataStore' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
    [0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
    backup.cpp@7856] INFO:Adding component (1) <NULL>\WriterMetadataStore.
    [0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
    componentbackuphelper.cpp@249] INFO:Component 'PerformanceCounters' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
    [0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
    backup.cpp@7856] INFO:Adding component (2) <NULL>\PerformanceCounters.
    [0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
    componentbackuphelper.cpp@249] INFO:Component 'WMI' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
    [0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
    backup.cpp@7856] INFO:Adding component (3) <NULL>\WMI.
    [0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
    componentbackuphelper.cpp@249] INFO:Component 'IISMETABASE' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
    [0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
    backup.cpp@7856] INFO:Adding component (4) <NULL>\IISMETABASE.
    [0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
    componentbackuphelper.cpp@249] INFO:Component 'COM+ REGDB' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
    [0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
    backup.cpp@7856] INFO:Adding component (5) <NULL>\COM+ REGDB.
    [0]ed8.124c 09/22/2011-14:05:03.755 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
    componentbackuphelper.cpp@249] INFO:Component 'IISCONFIG' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
    [0]ed8.124c 09/22/2011-14:05:03.755 [service CBlbBackupAsync::GetComponentsList
    backup.cpp@7856] INFO:Adding component (6) <NULL>\IISCONFIG.
    [0]ed8.124c 09/22/2011-14:05:03.768 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
    componentbackuphelper.cpp@249] INFO:Component 'System Files' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
    [0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::GetComponentsList
    backup.cpp@7856] INFO:Adding component (7) <NULL>\System Files.
    [0]ed8.124c 09/22/2011-14:05:03.768 [componenthelper CBlbComponentBackupContext::GetComponentVolumeInfo
    componentbackuphelper.cpp@249] INFO:Component 'Registry' has data on volume '{9f1ea685-a26b-11de-bbc7-806e6f6e6963}'
    [0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::GetComponentsList
    backup.cpp@7856] INFO:Adding component (8) <NULL>\Registry.
    [0]ed8.124c 09/22/2011-14:05:03.768 [service
    backup.cpp@7917] EXIT: CBlbBackupAsync::GetComponentsList
    [0]ed8.124c 09/22/2011-14:05:03.768 [service
    backup.cpp@7943] ENTER: CBlbBackupAsync::AddComponentsToLocalCatalog
    [0]ed8.124c 09/22/2011-14:05:03.768 [service
    backup.cpp@7961] EXIT: CBlbBackupAsync::AddComponentsToLocalCatalog
    [0]ed8.124c 09/22/2011-14:05:03.768 [service
    backup.cpp@11835] ENTER: CBlbBackupAsync::SetVolumesInLocalCatalog
    [0]ed8.124c 09/22/2011-14:05:03.768 [service
    backup.cpp@1557] ENTER: CBlbVolumeBackupContext::GetOriginalAccessPath
    [0]ed8.124c 09/22/2011-14:05:03.768 [service
    backup.cpp@1585] EXIT: CBlbVolumeBackupContext::GetOriginalAccessPath
    [0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::SetVolumesInLocalCatalog
    backup.cpp@11894] INFO:Not adding volume C: to catalog since it failed
    [0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::SetVolumesInLocalCatalog
    backup.cpp@11943] ERROR:Backup of all the source volumes failed.
    [0]ed8.124c 09/22/2011-14:05:03.768 [service
    backup.cpp@11970] EXIT: CBlbBackupAsync::SetVolumesInLocalCatalog
    [0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::UpdateLocalCatalogAfterbackup
    backup.cpp@8986] ERROR:CBlbBackupAsync::SetVolumesInLocalCatalog failed with hr=0x80780049
    [0]ed8.124c 09/22/2011-14:05:03.768 [blbengutils
    BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
    [0]ed8.124c 09/22/2011-14:05:03.768 [blbengutils CBlbImpersonationHelper::Revert
    BlbSecurityUtils.cpp@1215] INFO:No revert needed.
    [0]ed8.124c 09/22/2011-14:05:03.768 [blbengutils
    BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
    [0]ed8.124c 09/22/2011-14:05:03.768 [service
    backup.cpp@9050] EXIT: CBlbBackupAsync::UpdateLocalCatalogAfterbackup
    [0]ed8.124c 09/22/2011-14:05:03.768 [service
    backup.cpp@15335] ENTER: CBlbBackupAsync::RemoveESPCache
    [0]ed8.124c 09/22/2011-14:05:03.768 [service CBlbBackupAsync::RemoveESPCache
    backup.cpp@15338] INFO:No esp cache created, so not freeing up
    [0]ed8.124c 09/22/2011-14:05:03.768 [service
    backup.cpp@15345] EXIT: CBlbBackupAsync::RemoveESPCache
    [0]ed8.124c 09/22/2011-14:05:03.768 [service BlbBackupThreadFunc
    backup.cpp@19732] INFO:BlbBackupThreadFunc took 363232 ms to complete
    [0]ed8.124c 09/22/2011-14:05:03.768 [service
    backup.cpp@15795] ENTER: CBlbBackupAsync::DismountAllVHDs
    [0]ed8.124c 09/22/2011-14:05:03.768 [service
    backup.cpp@15723] ENTER: CBlbBackupAsync::DismountVHD
    Unknown( 70): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
    Unknown( 68): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
    Unknown( 69): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
    Unknown( 77): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
    Unknown( 78): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
    Unknown( 74): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
    Unknown( 79): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
    Unknown( 80): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
    Unknown( 71): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
    Unknown( 72): GUID=7a2b0bca-701d-904a-c23d-62f5e0f26656 (No Format Information found).
    [0]ed8.124c 09/22/2011-14:05:03.769 [service CBlbBackupAsync::DismountVHD
    backup.cpp@15744] ERROR:CBlbVhdHelper::Dismount failed for '\\?\Volume{d841345f-e505-11e0-bb05-00155d646a25}', hr: 0x80070490
    [0]ed8.124c 09/22/2011-14:05:03.769 [service
    backup.cpp@15775] EXIT: CBlbBackupAsync::DismountVHD
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
    BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils CBlbImpersonationHelper::Revert
    BlbSecurityUtils.cpp@1215] INFO:No revert needed.
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
    BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
    [0]ed8.124c 09/22/2011-14:05:03.769 [service
    backup.cpp@15819] EXIT: CBlbBackupAsync::DismountAllVHDs
    [0]ed8.124c 09/22/2011-14:05:03.769 [service BlbBackupThreadFunc
    backup.cpp@19738] WARNING:DismountAllVHDs unsuccessful with hr=0x80070490
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
    BlbBackupTargetUtils.cpp@3225] ENTER: BlbDeleteOldBackupLogFiles
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
    BlbFsUtils.cpp@1258] ENTER: BlbDeleteOldLogFiles
    [0]ed8.124c 09/22/2011-14:05:03.769 [util
    blbtrace.cpp@637] ENTER: GetBlbTracingDirectory
    [0]ed8.124c 09/22/2011-14:05:03.769 [util
    blbtrace.cpp@589] ENTER: GetWindowsLogsDirectory
    [0]ed8.124c 09/22/2011-14:05:03.769 [util
    blbtrace.cpp@618] EXIT: GetWindowsLogsDirectory
    [0]ed8.124c 09/22/2011-14:05:03.769 [util
    blbtrace.cpp@693] EXIT: GetBlbTracingDirectory
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
    BlbFsUtils.cpp@1151] ENTER: BlbFindFiles
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbFindFiles
    BlbFsUtils.cpp@1208] INFO:Found '3' log files in path 'C:\Windows\Logs\WindowsServerBackup\Backup-*'
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
    BlbFsUtils.cpp@1232] EXIT: BlbFindFiles
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbDeleteOldLogFiles
    BlbFsUtils.cpp@1303] INFO:Found '3' log files in path 'C:\Windows\Logs\WindowsServerBackup', retaining '5' logs
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
    BlbFsUtils.cpp@1336] EXIT: BlbDeleteOldLogFiles
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
    BlbFsUtils.cpp@1258] ENTER: BlbDeleteOldLogFiles
    [0]ed8.124c 09/22/2011-14:05:03.769 [util
    blbtrace.cpp@637] ENTER: GetBlbTracingDirectory
    [0]ed8.124c 09/22/2011-14:05:03.769 [util
    blbtrace.cpp@589] ENTER: GetWindowsLogsDirectory
    [0]ed8.124c 09/22/2011-14:05:03.769 [util
    blbtrace.cpp@618] EXIT: GetWindowsLogsDirectory
    [0]ed8.124c 09/22/2011-14:05:03.769 [util
    blbtrace.cpp@693] EXIT: GetBlbTracingDirectory
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
    BlbFsUtils.cpp@1151] ENTER: BlbFindFiles
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbFindFiles
    BlbFsUtils.cpp@1208] INFO:Found '3' log files in path 'C:\Windows\Logs\WindowsServerBackup\Backup_Error*'
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
    BlbFsUtils.cpp@1232] EXIT: BlbFindFiles
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbDeleteOldLogFiles
    BlbFsUtils.cpp@1303] INFO:Found '3' log files in path 'C:\Windows\Logs\WindowsServerBackup', retaining '5' logs
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
    BlbFsUtils.cpp@1336] EXIT: BlbDeleteOldLogFiles
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
    BlbFsUtils.cpp@1258] ENTER: BlbDeleteOldLogFiles
    [0]ed8.124c 09/22/2011-14:05:03.769 [util
    blbtrace.cpp@637] ENTER: GetBlbTracingDirectory
    [0]ed8.124c 09/22/2011-14:05:03.769 [util
    blbtrace.cpp@589] ENTER: GetWindowsLogsDirectory
    [0]ed8.124c 09/22/2011-14:05:03.769 [util
    blbtrace.cpp@618] EXIT: GetWindowsLogsDirectory
    [0]ed8.124c 09/22/2011-14:05:03.769 [util
    blbtrace.cpp@693] EXIT: GetBlbTracingDirectory
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
    BlbFsUtils.cpp@1151] ENTER: BlbFindFiles
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbFindFiles
    BlbFsUtils.cpp@1208] INFO:Found '0' log files in path 'C:\Windows\Logs\WindowsServerBackup\Backup_Operations*'
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
    BlbFsUtils.cpp@1232] EXIT: BlbFindFiles
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils BlbDeleteOldLogFiles
    BlbFsUtils.cpp@1303] INFO:Found '0' log files in path 'C:\Windows\Logs\WindowsServerBackup', retaining '5' logs
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
    BlbFsUtils.cpp@1336] EXIT: BlbDeleteOldLogFiles
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
    BlbBackupTargetUtils.cpp@3260] EXIT: BlbDeleteOldBackupLogFiles
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
    BlbSecurityUtils.cpp@1203] ENTER: CBlbImpersonationHelper::Revert
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils CBlbImpersonationHelper::Revert
    BlbSecurityUtils.cpp@1215] INFO:No revert needed.
    [0]ed8.124c 09/22/2011-14:05:03.769 [blbengutils
    BlbSecurityUtils.cpp@1220] EXIT: CBlbImpersonationHelper::Revert
    [0]ed8.124c 09/22/2011-14:05:03.769 [componenthelper
    componentbackuphelper.cpp@1456] ENTER: CBlbComponentBackupHelper::BackupComplete
    [0]ed8.124c 09/22/2011-14:05:03.769 [componenthelper CBlbComponentBackupHelper::BackupComplete
    componentbackuphelper.cpp@1460] INFO:bIsBackupFailed: 1
    [0]ed8.124c 09/22/2011-14:05:03.769 [componenthelper CBlbComponentBackupHelper::BackupComplete
    componentbackuphelper.cpp@1473] INFO:BackupComplete already attempted.
    [0]ed8.124c 09/22/2011-14:05:03.769 [componenthelper
    componentbackuphelper.cpp@1518] EXIT: CBlbComponentBackupHelper::BackupComplete
    [0]ed8.124c 09/22/2011-14:05:03.769 [service
    backup.cpp@13649] ENTER: CBlbBackupAsync::DeleteSourceSnapshotsIfNeeded
    [0]ed8.124c 09/22/2011-14:05:03.769 [service
    PerformanceManager.cpp@550] ENTER: CPerformanceManager::Initialize
    [0]ed8.124c 09/22/2011-14:05:03.769 [service
    PerformanceManager.cpp@281] ENTER: CPerformanceManager::QueryPerformanceSettings
    [0]ed8.124c 09/22/2011-14:05:03.770 [service CPerformanceManager::QueryPerformanceSettings
    PerformanceManager.cpp@382] INFO:Buffer size is 4. First line is <NULL>
    [0]ed8.124c 09/22/2011-14:05:03.770 [service CPerformanceManager::QueryPerformanceSettings
    PerformanceManager.cpp@389] INFO:Custom performance settings is empty.
    [0]ed8.124c 09/22/2011-14:05:03.770 [service
    PerformanceManager.cpp@484] EXIT: CPerformanceManager::QueryPerformanceSettings
    [0]ed8.124c 09/22/2011-14:05:03.770 [service
    PerformanceManager.cpp@560] EXIT: CPerformanceManager::Initialize
    [0]ed8.124c 09/22/2011-14:05:03.777 [util
    systemutils.cpp@709] ENTER: BlbutilRegReadDWORD
    [0]ed8.124c 09/22/2011-14:05:03.777 [util BlbutilRegReadDWORD
    systemutils.cpp@731] WARNING:RegQueryValueEx DoNotDeleteFFBSnapshot unsuccessful, hr:0x80070002
    [0]ed8.124c 09/22/2011-14:05:03.777 [util
    systemutils.cpp@749] EXIT: BlbutilRegReadDWORD
    [0]ed8.124c 09/22/2011-14:05:03.777 [service
    PerformanceManager.cpp@585] ENTER: CPerformanceManager::GetSettingsForVolume
    [0]ed8.124c 09/22/2011-14:05:03.777 [service
    PerformanceManager.cpp@620] EXIT: CPerformanceManager::GetSettingsForVolume
    [0]ed8.124c 09/22/2011-14:05:03.777 [service CBlbBackupAsync::DeleteSourceSnapshotsIfNeeded
    backup.cpp@14045] INFO:Deleting current snapshot (\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy8\)
    [0]ed8.124c 09/22/2011-14:05:03.931 [service
    backup.cpp@14082] EXIT: CBlbBackupAsync::DeleteSourceSnapshotsIfNeeded
    [0]ed8.124c 09/22/2011-14:05:03.933 [service
    backup.cpp@14432] ENTER: CBlbBackupAsync::SetSourceDiffAreasIfNeeded
    [0]ed8.124c 09/22/2011-14:05:03.933 [service
    backup.cpp@14539] EXIT: CBlbBackupAsync::SetSourceDiffAreasIfNeeded
    [0]ed8.124c 09/22/2011-14:05:03.933 [service
    backup.cpp@14737] ENTER: CBlbBackupAsync::ResetTargetDiffAreaSize
    [0]ed8.124c 09/22/2011-14:05:03.933 [service CBlbBackupAsync::ResetTargetDiffAreaSize
    backup.cpp@14754] INFO:Not resetting diff area
    [0]ed8.124c 09/22/2011-14:05:03.933 [service
    backup.cpp@14866] EXIT: CBlbBackupAsync::ResetTargetDiffAreaSize
    [0]ed8.124c 09/22/2011-14:05:03.963 [service BlbBackupThreadFunc
    backup.cpp@19873] ERROR:Backup operation aborted with hr=80780049
    [0]ed8.124c 09/22/2011-14:05:03.963 [service CBlbSystemStateBackupAsync::SetState
    systemstatebackup.cpp@1061] INFO:ENGINE STATE:BACKUP SYSTEM STATE:5
    [0]ed8.124c 09/22/2011-14:05:03.963 [service CBlbBackupAsync::SetState
    backup.cpp@14709] INFO:ENGINE STATE:BACKUP:12. Previous state:8
    [0]ed8.124c 09/22/2011-14:05:03.963 [util
    fileutils.cpp@1388] ENTER: BlbutilDeleteDirectory
    [0]ed8.124c 09/22/2011-14:05:03.963 [util
    fileutils.cpp@1183] ENTER: BlbutilDeleteDirectory2
    [0]ed8.124c 09/22/2011-14:05:03.970 [util
    fileutils.cpp@1344] EXIT: BlbutilDeleteDirectory2
    [0]ed8.124c 09/22/2011-14:05:03.970 [util BlbutilDeleteDirectory
    fileutils.cpp@1443] INFO:Aborting deletion of
    \\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963}\WindowsImageBackup\HEIAPP02\Backup 2011-09-22 135901 as one or more diectories or files are not getting deleted
    [0]ed8.124c 09/22/2011-14:05:03.970 [util BlbutilDeleteDirectory
    fileutils.cpp@1463] INFO:Total number of files/directories deleted in
    \\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963}\WindowsImageBackup\HEIAPP02\Backup 2011-09-22 135901 is 17
    [0]ed8.124c 09/22/2011-14:05:03.970 [util BlbutilDeleteDirectory
    fileutils.cpp@1465] INFO:Deleting
    \\?\Volume{9f1ea684-a26b-11de-bbc7-806e6f6e6963}\WindowsImageBackup\HEIAPP02\Backup 2011-09-22 135901 took 0 ms
    [0]ed8.124c 09/22/2011-14:05:03.970 [util
    fileutils.cpp@1467] EXIT: BlbutilDeleteDirectory
    [0]ed8.124c 09/22/2011-14:05:03.970 [service
    backup.cpp@12718] ENTER: CBlbBackupAsync::PublishAllBackupStopEvents
    [0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbBackupAsync::PublishAllBackupStopEvents
    backup.cpp@13047] INFO:Backup info for Volume [hr=8078001D, detailed hr = 0, Flags=1574, backupTypeDetermined = 1, IsCritical = 1]
    [0]ed8.124c 09/22/2011-14:05:03.971 [componenthelper
    componentbackuphelper.cpp@1850] ENTER: CBlbComponentBackupHelper::FillComponentConsistencyStatus
    [0]ed8.124c 09/22/2011-14:05:03.971 [componenthelper
    componentbackuphelper.cpp@1944] EXIT: CBlbComponentBackupHelper::FillComponentConsistencyStatus
    [0]ed8.124c 09/22/2011-14:05:03.971 [service
    systemstatebackup.cpp@1526] ENTER: CBlbSystemStateBackupAsync::GetSSBTimes
    [0]ed8.124c 09/22/2011-14:05:03.971 [service
    systemstatebackup.cpp@1531] EXIT: CBlbSystemStateBackupAsync::GetSSBTimes
    [0]ed8.124c 09/22/2011-14:05:03.971 [blbengutils
    BlbSqmUtils.cpp@342] ENTER: PublishBackupSqmDatapoint
    [0]ed8.124c 09/22/2011-14:05:03.971 [service
    backup.cpp@13273] EXIT: CBlbBackupAsync::PublishAllBackupStopEvents
    [0]ed8.124c 09/22/2011-14:05:03.971 [service
    backup.cpp@15016] ENTER: CBlbBackupAsync::UpdateBackupStatInRegistry
    [0]ed8.124c 09/22/2011-14:05:03.971 [service
    backup.cpp@14895] ENTER: CBlbBackupAsync::GetLastSuccessfulBackupInfo
    [0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbBackupAsync::GetLastSuccessfulBackupInfo
    backup.cpp@14960] INFO:Last successful backup stats.  utc time 0,  target name (NULL), target access path (NULL)
    [0]ed8.124c 09/22/2011-14:05:03.971 [service
    backup.cpp@14991] EXIT: CBlbBackupAsync::GetLastSuccessfulBackupInfo
    [0]ed8.124c 09/22/2011-14:05:03.971 [helper
    blbBackupStatUpdater.cpp@205] ENTER: CBlbBackupStatUpdater::SaveStatsToRegistry
    [0]ed8.124c 09/22/2011-14:05:03.971 [helper CBlbBackupStatUpdater::SaveStatsToRegistry
    blbBackupStatUpdater.cpp@233] INFO:RegOpenKeyEx was unsuccessful for HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsBackup.  hr=0x80070002
    [0]ed8.124c 09/22/2011-14:05:03.971 [helper
    blbBackupStatUpdater.cpp@368] EXIT: CBlbBackupStatUpdater::SaveStatsToRegistry
    [0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbBackupAsync::UpdateBackupStatInRegistry
    backup.cpp@15058] WARNING:pBlbBackupStatUpdater->SaveStatsToRegistry unsuccessful with hr=0x80070002. This should be fine on server skus.
    [0]ed8.124c 09/22/2011-14:05:03.971 [service
    backup.cpp@15069] EXIT: CBlbBackupAsync::UpdateBackupStatInRegistry
    [0]ed8.124c 09/22/2011-14:05:03.971 [service BlbBackupThreadFunc
    backup.cpp@19957] WARNING:UpdateBackupStatInRegistry unsuccessful with hr=80070002
    [0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
    restoresystemstate.cpp@259] ENTER: CBlbsrvSystemStateRestore::FinalRelease
    [0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
    restorefiles.cpp@162] ENTER: CBlbsrvRestoreFiles::FinalRelease
    [0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
    srvutil.cpp@139] ENTER: BlbsrvFreeRestoreFileSpecs
    [0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
    srvutil.cpp@151] EXIT: BlbsrvFreeRestoreFileSpecs
    [0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
    restorefiles.cpp@210] EXIT: CBlbsrvRestoreFiles::FinalRelease
    [0]ed8.124c 09/22/2011-14:05:03.971 [blbsrv
    restoresystemstate.cpp@312] EXIT: CBlbsrvSystemStateRestore::FinalRelease
    [0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbAsync::Done
    async.cpp@187] INFO:Marking async operation as completed
    [0]ed8.124c 09/22/2011-14:05:03.971 [service CBlbAsync::Done
    async.cpp@190] INFO:Calling CompleteAsyncOperation for parent operation
    [0]ed8.124c 09/22/2011-14:05:03.971 [service
    backup.cpp@19987] EXIT: BlbBackupThreadFunc
    [0]ed8.f68 09/22/2011-14:05:04.227 [service
    backup.cpp@3149] ENTER: CBlbBackupAsync::QueryStatus
    [0]ed8.f68 09/22/2011-14:05:04.227 [service
    backup.cpp@3209] ENTER: CBlbBackupAsync::QueryVolumeBackupStatus
    [0]ed8.f68 09/22/2011-14:05:04.227 [componenthelper
    componentbackuphelper.cpp@1850] ENTER: CBlbComponentBackupHelper::FillComponentConsistencyStatus
    [0]ed8.f68 09/22/2011-14:05:04.227 [componenthelper
    componentbackuphelper.cpp@1944] EXIT: CBlbComponentBackupHelper::FillComponentConsistencyStatus
    [0]ed8.f68 09/22/2011-14:05:04.227 [service
    backup.cpp@3342] EXIT: CBlbBackupAsync::QueryVolumeBackupStatus
    [0]ed8.f68 09/22/2011-14:05:04.227 [service
    backup.cpp@3359] ENTER: CBlbBackupAsync::QuerySystemStateBackupStatus
    [0]ed8.f68 09/22/2011-14:05:04.227 [service
    systemstatebackup.cpp@740] ENTER: CBlbSystemStateBackupAsync::QueryStatus
    [0]ed8.f68 09/22/2011-14:05:04.227 [service
    systemstatebackup.cpp@874] EXIT: CBlbSystemStateBackupAsync::QueryStatus
    [0]ed8.f68 09/22/2011-14:05:04.227 [service
    backup.cpp@3399] EXIT: CBlbBackupAsync::QuerySystemStateBackupStatus
    [0]ed8.f68 09/22/2011-14:05:04.227 [service
    backup.cpp@3192] EXIT: CBlbBackupAsync::QueryStatus
    [0]bf0.fe0 09/22/2011-14:05:04.228 [util
    blbtrace.cpp@853] ENTER: BlbStopTracing
    [0]bf0.fe0 09/22/2011-14:05:04.228 [util
    blbtrace.cpp@397] ENTER: BlbStopTracing
    [0]bf0.fe0 09/22/2011-14:05:04.228 [util
    blbtrace.cpp@51] ENTER: BlbAllocateEventTraceProp
    [0]bf0.fe0 09/22/2011-14:05:04.228 [util
    blbtrace.cpp@83] EXIT: BlbAllocateEventTraceProp
    Log Name:      Microsoft-Windows-Backup
    Source:        Microsoft-Windows-Backup
    Date:          9/22/2011 1:28:44 AM
    Event ID:      5
    Task Category: None
    Level:         Error
    Keywords:     
    User:          SYSTEM
    Computer:      HEIAPP02.heimstaden.local
    Description:
    The backup operation that started at '‎2011‎-‎09‎-‎22T06:22:24.687716500Z' has failed with following error code '2155347997'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
    Sumesh P - Microsoft Online Community Support

  • During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation.  Tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!

    During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation. 
    "An Error occured during intstallation of Assembly "Microsoft .VC80.CRT type="win32". version="8.0.50727,6195", public Key Token="1fc8b3b9a1e18e3b, processor Architecture'+x86'".  This is all followed by some more text and code HRESULT:0x80070005   
    Ive tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!
    Anne Marie

    Probably should've searched around a bit more. Just saw a similar forum post to my own in which redownloading and burning solved another user's similar issue. As of now I've redownloaded the 64-bit ISO, burned it, and so far so good (at 72% extracting files). I will repost here if it was a success in hopes that other users with a similar issue find this and benefit from it. Hope I didn't just waste anyone's time with a question that had already been answered (haha)

  • Errors in DDIC Activation phase during upgrade.

    Hi,
    Title: Errors in DDIC Activation phase during upgrade.
    During preprocessing phase (phase ACT_UPG) we got many DDIC activation errors such as:
    SAPup broke during phase ACT_UPG in module MAIN_SHDRUN / Shadow System Operations: SPDD and Activation.
    DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCI702.CPE
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1EEDO519 "Data Element" "/BI0/OICH_AT" could not be activated
    1EEDO519 "Data Element" "/BI0/OICREA_TIME" could not be activated
    1 ETP111 exit code           : "8"
    We have searched the SDN, many posts say that we have to just activate them. But my question is where - in source system OR in Shadow system?
    We assumed it is Source system (please correct if it is wrong), unlocked the system and logged in as normal user and tried to activate the Data Element. Now, it says "Search Help /BI0/OICH_AT is not active or contains no parameter".   How to go about it?
    If it is Shadow System, how can i unlock the system?
    Many thanks,
    Mohan.

    Dear Mohan,
    There are search helps configured for the dataelements in ACTUPG.ELG. These search helps were created by mistake by the system.
    The search helps can be deleted manually in the shadow instance.
    In this case you should remove these fields in se11 (in your shadow instance) as the Search help shouldn't exist.
    You should do this step for all data elements shown in the log ACTUPG.ELG:
    For example: SE11 -> /BI0/OICH_AT -> Change -> Tab "Further characteristics"
    1. Goto SE11:
    2. Select Data type and fill "/BI0/OICH_AT" and display
    3. Select the tab "Further Characteristics" and
    4. Remove the values for fields "Name" and "Parameters"
       then click on icon "Activate"
    Please do the same for the other object.
    But before performing above steps you need to unlock the shadow instance by the following command:
    SAPup unlockshd <SID>
    (if using SAPup)
    SAPehpi unlockshd <SID>
    (if using SAPehpi)
    Also do not forget to lock the shadow system again after performing the steps and continuing the upgrade by the following command:
    SAPup lockshd <SID>
    (if using SAPup)
    SAPehpi lockshd <SID>
    (if using SAPehpi)
    You can logon to your shadow system with any different user than DDIC.
    Best Regards,
    Abhishek
    Edited by: Abhishek Srivastava on Oct 17, 2011 6:26 PM

  • Server:An Error occurred in the container during the request processing

    Hi
    I am using tomcat 5.0 as for my serlvets. I get below exception when processing a request. Please let me know under what conditions do we get such exception
    2008-5-14 9:33:34 org.apache.coyote.tomcat5.CoyoteAdapter service
    Server:An exception or error occurred in the container during the request processing
    java.lang.NullPointerException
    at org.apache.tomcat.util.buf.MessageBytes.toChars(MessageBytes.java:245)
    at org.apache.tomcat.util.http.mapper.Mapper.map(Mapper.java:509)
    at org.apache.coyote.tomcat5.CoyoteAdapter.postParseRequest(CoyoteAdapter.java:279)
    at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:158)
    at org.apache.jk.server.JKCoyoteHandler.invoke(JKCoyoteHandler.java:300)
    at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:374)
    at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:743)
    at org.apache.jk.common.ChannelSocke.processConnection(ChannelSocket.java:675)
    at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:866)
    at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
    at java.lang.Thread.run(Thread.java:619)
    Thanks
    fangbinyu

    This might help (then again, it might not!):
    Here is your stack trace:
    2008-5-14 9:33:34 org.apache.coyote.tomcat5.CoyoteAdapter service
    Server:An exception or error occurred in the container during the request processing
    java.lang.NullPointerException
    at org.apache.tomcat.util.buf.MessageBytes.toChars(MessageBytes.java:245)
    at org.apache.tomcat.util.http.mapper.Mapper.map(Mapper.java:509)
    at org.apache.coyote.tomcat5.CoyoteAdapter.postParseRequest(CoyoteAdapter.java:279)
    at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:158)
    at org.apache.jk.server.JKCoyoteHandler.invoke(JKCoyoteHandler.java:300)
    at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:374)
    at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:743)
    at org.apache.jk.common.ChannelSocke.processConnection(ChannelSocket.java:675)
    at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:866)
    at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
    at java.lang.Thread.run(Thread.java:619)
    Do you see any class name in it that you created? If so, look into that class and either set breakpoints and step through it until an exception is thrown, or fill it with System.out.println() statements to see where it failed.
    If none of the items above is a class you created, I suspect its the vendor classes that failed due to them trying to configure themselves via various configuration files in the project (usually *.xml files). Check out your *.xml files for snytax error and/or incorrect configurations and/or missing configuration info. Null pointer exception means the vendor software went to call a function of a class that was not instansiated. Example: person.getName() will throw that type of error if person is null.
    If you still cant find the problem, you might try creating a simple project and add configuration info to it, get it to work, then add more configuration data, get it to work, etc until you duplicate your original project configuration setup. This way, you can isolate where the problem is.

  • SEVERE: An exception or error occurred in the container during the request

    hi
    I am using tomcat 4.0 as for my serlvets. I get below exception when processing a request. Please let me know under what conditions do we get such exception
    Aug 31, 2005 12:20:28 PM org.apache.coyote.tomcat5.CoyoteAdapter service
    SEVERE: An exception or error occurred in the container during the request processing
    java.lang.NullPointerExceptionnull at java.io.Writer.write(Writer.java:126)null at java.io.PrintWriter.newLine(PrintWriter.java:254)null at java.io.PrintWriter.println(PrintWriter.java:405)null at java.io.PrintWriter.println(PrintWriter.java:516)null at org.apache.catalina.logger.LoggerBase.log(LoggerBase.java:266)null at org.apache.catalina.core.StandardWrapperValve.log(StandardWrapperValve.java:376)null at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:279)null at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)null at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)null at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)null at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)null at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)null at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)null at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)null at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)null at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)null at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)null at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)null at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)null at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)null at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)null at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)null at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)null at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:300)null at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:374)null at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:743)null at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:675)null at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:866)null at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)null at java.lang.Thread.run(Thread.java:534)null
    Thanks
    Rajesh

    Srikanth,
    Problem is that the exception is not form any PrintWriter object i had instantiated in my servlet code. Infact, the exception comes from a class of tomcat when it is trying to log some information. The basic thing is I am contacting a Geographical positioning server from servlet. The contact is fine and I get requested information back from server. But, once the control comes back to server, I get that exception. If I dont contact the geo server, I dont get any exception.
    Thanks for your immediate reply.
    Rajesh

Maybe you are looking for