Error in native SQL while inserting data into CORP table

HI all,
I am getting an exception while inserting records using native SQL into CORP table.
PFB the code.
LOOP AT gi_hrp1001 INTO wa_hrp1001.
TRY.
        EXEC SQL.
          INSERT INTO misuser.Table_4
          VALUES (wa_hrp1001-otype , wa_hrp1001-objid ).
        ENDEXEC.
      CATCH cx_sy_native_sql_error.
        MESSAGE 'Connect - Error ' TYPE 'E'.
    ENDTRY.
ENDLOOP.
Please help.
Thanks & Regards
Nitesh

I see two issue with your Insert. 1) you need to specify the field names in the table, for example otype and objid. 2) You need to indicate in the VALUES that you're using host variables by using the prefix :.
I think the correct syntax is:
        EXEC SQL.
          INSERT INTO misuser.Table_4
         (otype, objid)
          VALUES (:wa_hrp1001-otype, :wa_hrp1001-objid)
        ENDEXEC.
Good luck.

Similar Messages

Error while inserting data into a table.

Hi All,
I created a table.While inserting data into the table i am getting an error.Its telling "Create data Processing Function Module".Can any one help me regarding this?
Thanx in advance
anirudh

Hi Anirudh,
Seems there is already an entry in the Table with the same Primary Key.
INSERT Statement will give short dump if you try to insert data with same key.
Why dont you use MODIFY statement to achieve the same.
Reward points if this Helps.
Manish

Error while Inserting data into flow table

Hi All,
I am very new to ODI, I am facing lot of problem in my 1st interface. So I have many questions here, please forgive me if it has irritated to you.
========================
I am developing a simple Project to load a data from an input source file (csv) file into a staging table.
My plan is to achieve this in 3 interfaces:
1. Interface-1 : Load the data from an input source (csv) file into a staging table (say Stg_1)
2. Interface-2 : Read the data from the staging table (stg_1) apply the business rules to it and copy the processed records into another staging table (say stg_2)
3. Interface-3 : Copy the data from staging table (stg_2) into the target table (say Target) in the target database.
Question-1 : Is this approach correct?
========================
I don't have any key columns in the staging table (stg_1). When I tried to execute the Flow Control of this I got an error:
Flow Control not possible if no Key is declared in your Target Datastore
With one of the response (the response was - "FLOW control requires a KEY in the target table") in this Forum I have introduced a column called "Record_ID" and made it a Primary Key column into my staging table (stg_1) and my problem has been resolved.
Question-2 : Is a Key column compulsary in the target table? I am working in BO Data Integrator, there is no such compulsion ... I am little confused.
========================
Next, I have defined one Project level sequence. I have mapped the newly introduced key column Record_Id (Primary Key) with the Project level sequence. Now I am got another error of "CKM not selected".
For this, I have inserted "Insert Check (CKM)" knowledge module in my Project. With this the above problem of "CKM not selected" has been resolved.
Question-3 : When is this CKM knowledge module required?
========================
After this, the flow/interface is failing while loading data into the intermediar ODI created flow table (I$)
1 - Loading - SS_0 - Drop work table
2 - Loading - SS_0 - Create work table
3 - Loading - SS_0 - Load data
5 - Integration - FTE Actual data to Staging table - Drop flow table
6 - Integration - FTE Actual data to Staging table - Create flow table I$
7 - Integration - FTE Actual data to Staging table - Delete target table
8 - Integration - FTE Actual data to Staging table - Insert flow into I$ table
The Error is at Step-8 above. When opened the "Execution" tab for this step I found the message - "Missing parameter Project_1.FTE_Actual_Data_seq_NEXTVAL RECORD_ID".
Question-4 : What/why is this error? Did I made any mistake while creating a sequence?

Everyone is new and starts somewhere. And the community is there to help you.
1.) What is the idea of moving data from stg_1 and then to stg_2 ? Do you really need it for any other purpose other than move data from SourceFile to Target DB.
Otherwise, its simple to move data from SourceFile -> Target Table
2.) Does your Target table have a Key ?
3.) CKM (Check KM) is required when you want to do constraint validation (Checking) on your data. You can define constraints (business rules) on the target table and Flow Control will check the data that is flowing from Source File to Target table using the CKM. All the records that donot satisfy the constraint will be added to E$ (Error table) and will not be added to the Target table.
4.) Try to avoid ODI sequences. They are slow and arent scalable. Try to use Database sequence wherever possible. And use the DB sequence is target mapping as
<%=odiRef.getObjectName( "L" , "MY_DB_Sequence_Row" , "D" )%>.nextval
where MY_DB_Sequence_Row is the oracle sequence in the target schema.
HTH

Access issues while inserting data in a table in same schema

Hi All.
I have a script that at first creates and then populates a table. My script used to run fine in production environment till few hours back. But all of a sudden, it is popping up error while inserting data into the table .
Error message - "Insufficient Previlages".
Please suggest me what may be the reasons for this kind of error.
Thanks in advance

Sonika wrote:
Hi All.
I have a script that at first creates and then populates a table. My script used to run fine in production environment till few hours back. But all of a sudden, it is popping up error while inserting data into the table .
Error message - "Insufficient Previlages".
Please suggest me what may be the reasons for this kind of error.
1) something changed
2) you are hitting a bug

Error while inserting data into BFILE datatype

Dear Experts,
I am trying to insert data into resume table, but it is throwing error:
create table resume(resume blob);
declare
f_lob bfile;
b_lob blob;
begin
insert into resume(resume) values(empty_blob())
return documents into b_lob;
f_lob := bfilename( 'RESUME_SAVE', 'Pawan-resume.doc' );
dbms_lob.fileopen(f_lob, dbms_lob.file_readonly);
dbms_lob.loadfromfile
( b_lob, f_lob, dbms_lob.getlength(f_lob) );
dbms_lob.fileclose(f_lob);
commit;
end;
return documents into b_lob;
ERROR at line 8:
ORA-06550: line 8, column 10:
PL/SQL: ORA-00904: "DOCUMENTS": invalid identifier
ORA-06550: line 7, column 2:
PL/SQL: SQL Statement ignored
Please help
Regards
Sunil Kumar

Thank you very much Mihael................... It works
But I think there is a mistake in oracle documentation, please check following link:
http://docs.oracle.com/cd/B10501_01/appdev.920/a96591/adl14cas.htm
Thanks & Regards
Sunil Kumar

Error while loading data into External table from the flat files

HI ,
We have a data load in our project which feeds the oracle external tables with the data from the Flat Files(.bcp files) in unix.
While loading the data, we are encountering the following error.
Error occured (Error Code : -29913 and Error Message : ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04063: un) while loading data into table_ext
Please let us know what needs to be done in this case to solve this problem.
Thanks,
Kartheek

Kartheek,
I used Google (mine still works).... please check those links:
http://oraclequirks.blogspot.com/2008/07/ora-29400-data-cartridge-error.html
http://jonathanlewis.wordpress.com/2011/02/15/ora-29913/
HTH,
Thierry

Inserting Data into nested table

I am exploring the differences between OBJECT & RECORD.
As i am still in process of learning, I found that both are structures which basically groups elements of different datatypes or columns of different datatypes, one is used in SQL and other is used in PL/SQL, please correct me if I am wrong in my understanding.
Below i am trying to insert data into an table of type object but i am unsuccessful can you please help.
CREATE OR REPLACE type sam as OBJECT
v1 NUMBER,
v2 VARCHAR2(20 CHAR)
---Nested Table---
create or replace type t_sam as table of sam;
--Inserting data----
insert into table(t_sam) values(sam(10,'Dsouza'));
Error Message:
Error starting at line 22 in command:
insert into table(t_sam) values(sam(10,'Dsouza'))
Error at Command Line:22 Column:13
Error report:
SQL Error: ORA-00903: invalid table name
00903. 00000 - "invalid table name"
*Cause:
*Action:

Ariean wrote:
So only purpose of equivalent SQL types concept of nested tables is to use them as one of the data types while defining an actual table?
Sort of - you can definitely use them for more than just "defining an actual table". (I'm fairly certain you could pass a nested table into a procedure, for example - try it, though - I'm not 100% sure on that - it just "makes sense". If you can define a type, you can use it, pass it around, whatever.).
Ariean wrote:
And that nested table could be a record in SQL or an Object in PLSQL or just simple datatype(number,varchar etc)?
Nested tables are just like any other custom data type. You can create a nested table of other data types. You can create a custom data type of nested tables.
It could get stupidly .. er, stupid O_0
CREATE TYPE o_myobj1 AS object ( id1   number, cdate1 date );
CREATE TYPE t_mytype1 AS table of o_myobj1;
CREATE TYPE o_myobj2 AS object ( id2   number, dumb t_mytype1 );
CREATE TYPE t_dumber AS table of o_myobj2;
O_0
Ok, my brain's starting to hurt - I hope you get the idea
Ariean wrote:
Secondly is my understanding correct about OBJECT & RECORD?
I can't think of any benefit of describing it another way.

Insert data into linked table

Problem when you try to insert data into linked table.
I made the view with all linked table columns (field1 is PK, field2, field3......) plus new primary key field "field1_PK" for tabular form wizard primary key field definition. After submit data on tabular form appears:
"Error in mru internal routine:ORA-2001:Error in MRU: row=1,ORA-00957: duplicate column name ORA-02063:preciding line from "SHEMA_NAME", insert into "field1","field1_PK","field3",........) values (:b1,:b2,:b3.........)
Error Unable to process update.
Is it bug too?

Hi,
Have you tried to do your updates using an INSTEAD OF TRIGGER on your view? An INSTEAD OF TRIGGER allows you to update a non-updateable view.
The following book contains an excellent introduction to this topic.
"Oracle PL/SQL for Dummies"
written by Rosenblum and Dorsey
published by Wiley Publishing Inc.
The following book is also excellant reference that deals with INSTEAD OF TRIGGERS.
"Oracle PL/SQL programming
written by Steven Feuerstein
published by O'Reilly
Hope this helps.
Cheers,
Patrick Cimolini

ORA-1013 when trying to insert data into the table

Hi,
While inserting record into a table, we are getting the following error:
ORA-1013
01013, 00000, "user requested cancel of current operation"
I could not find any information in alert log also.
We have a bitmap index on this table. However, we never got this error till now.
Also i found that the tablespace who stores data has lot of space and tablespace which consists of the indexes is close to 90% full today ( i dont know what was the space available yesterday when there was error).
I know that information i provided might be very less, but i gave as much information as i can provide.
Can you please help me in trouble shooting this problem.
Thank you
Giridhar

Sorry. i forgot to give version information
Oracle version: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
OS: SunOS 5.10
we got it only once yesterday. only for one table. not for any other tables.
Thanks aalap for your quick response.
Giridhar

How to insert date into a table by selecting form sysdate

Hi
My Table format is like this
SQL>desc log;
Name Null? Type
EMP_ID VARCHAR2(30)
LOGIN DATE
LOGOUT DATE
now when ever an employee logs in i w'd like to insert date into the table.
i put up the following query
SQL> insert into log(emp_id,login)
2 values
3 ('Ed_01',
4 select
5 sysdate
6 from dual
7 );
select
ERROR at line 4:
ORA-00936: missing expression
I got the above error how can i rectify that plz suggest me very urgently as i have to submit my project very early to my boss.

try this :
insert into log(emp_id,login) values ('Ed_01', sysdate);

How to insert data into a table from an xml document

using the XmlSql Utility, how do I insert data into a table from an xml document, using the sqlplus prompt.
if i use the xmlgen.insertXML(....)
requires a CLOB file, which i dont have, only the xml doc.
Cant i insert directly from the doc to the table?
the xmlgen examples I have seen first convert a table to a CLOB xmlString and then insert it into another table.
Isnt there any other way?

Your question is little perplexing.
If you're using XML SQL Utility from
the commandline, just use putXML.
java OracleXML putXML
null

Insert data into multiple tables

Hi all,
I've a requirement where i need to insert data into multiple tables using PL/SQL procedure
Procedure should have two parameters
1. Table Name (parameter1)
2. Data (parameter2)
Based on these two parameters i need to insert data into table (parameter1) using data (parameter2)
ex:
Procedure insert_data (p_table IN VARCHAR2
,p_data IN -- what should be the datatype?
IS
l_statement VARCHAR2(2000);
BEGIN
-- insert data into tables
INSERT INTO p_table
values (....);
END insert_data;Thanks in advance!!

BEDE wrote:
Amen to that!
So, I believe a better approach would be the following...
Suppose you have N datafiles with the same structure, and you wish to insert into the database the data from all those files.
For that, you should have a single table, named, say incoming_file_data, which should be structured more or less like below:
create table incoming_file_data (
filename varchar2(250) not null -- name of the file inserted from
,file_time timestamp -- timestamp when the data was inserted
,... -- the columns of meaningful data contained in the lines of those files
);And you will insert the data from all those files in this table, having normally one transaction for each file processed, for otherwise, when shit happens, some file may only get to be partially inserted into the table...
Maybe one good approach would be to create dynamically an external table for the file to be loaded, and then execute dynamically insert select into the table I said, so that you will have only one insert select for one file instead of using utl_file... RTM on that.If the file structures are the same, and it's just the filename that's changing, I would have a single external table definition, and use the alter table ... location ... statement (through execute immediate) to change the filename(s) as appropriate before querying the data. Of course that's not scalable if there are multiple users intenting to use this, but generally when we talk about importing multiple files, it's a one-user/one-off/once-a-day type of scenario, so multi-user isn't a consideration.

Insert data into fact table from source database tables

here i try to insert data into fact table from source database tables here is the query
ALTER procedure [dbo].[facttable]
as
insert into [pp dw].dbo.Dimfact(Prod_ID,Production_ID,Material_ID,Equip_ID,WC_ID,Recipe_ID,Quantity,costprice)
select Products.[Product ID],[Production ID],Materials.[Material ID],[Equipment ID],[Work Centre ID],[Recipy ID],Quantity,[cost price]
from
[PRODUCTION PLANNING 2].dbo.[Products],
[PRODUCTION PLANNING 2].dbo.[Production Detail],
[PRODUCTION PLANNING 2].dbo.[Material category],
[PRODUCTION PLANNING 2].dbo.[Materials],
[PRODUCTION PLANNING 2].dbo.[Equipment],
[PRODUCTION PLANNING 2].dbo.[Working Centre] ,
[PRODUCTION PLANNING 2].dbo.[Recipies]
where
Products.[Product ID] in (13, 14, 15, 16, 17) and
[Production Detail].[Production ID] in (1, 2, 3) and
[Materials].[Material ID] in (1, 2, 3, 4, 5) and
[Equipment].[Equipment ID] in (1, 2, 3, 4) and
[Working Centre].[Work Centre ID] in (1, 2, 3) and
[Recipies].[Recipy ID] in (1, 2, 3) and
[Material category].[Category ID] in (8, 9, 10, 11, 12, 13)
and when i execute query it shows me error
The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Dimfact_Dimproduct". The conflict occurred in database "pp dw", table "dbo.Dimproduct", column 'Prod_ID'.
ERD IS
HOW TO SOLVE THIS PROBLEM?

I cant see any join conditions in your query posted. Whats the purpose of the query above. It will just bring you a cartesian product (cross join) of tables involved subjected to filters. Are you sure this is the correct query?
The error you're getting may be because you've not yet populated DimProduct or may be because of logic you used in popultaing DimProduct causing it to miss some records which is what query is referring to in above case.
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

How to insert data into two tables at once using XSJS

Hello Experts,
My requirement is to insert data into two tables at once. I have a XS JS app and want to update these tables via xsjs. How can I do this ?
Is there any mechanism like sql 'transactions' also in Hana ? If yes, how can I call it via xsjs ? If not, what are the ways to populate two different tables at once.
Please advice. Any help is really appreciated.
Thanks !

There is nothing special about inserting into two tables at once in XSJS. Just issue two separate SQL Statements. Don't execute the COMMIT until after both commands. That way they are all one transaction.

Inserting data into multiple tables in jdbc

I am doing on file to jdbc. Now I got a requirement to insert data into multiple tables on the receiver side. How can I do this ?

Hi,
you are going to insert data into 4 tables in a sequence one after another , I see three options.
1) Stored procedure and 2) creating 4 statement data structure (one for each table)
The third option is writing a SQL with join for the 4 tables and use action command = SQL_DML. Example as follows....
Write SQL code and place it in access tag. Pass values for the columns using key tag...
<stmt>
    <Customers action="SQL_DML">
      <access> UPDATE Customers SET CompanyName=u2019$NAME$u2019, Address=u2019$ADDRESS$' WHERE CustomerID='$KEYFIELD$u2019
      </access>
      <key>
        <NAME>name</NAME>
        <ADDRESS>add </ADDRESS>
        <KEYFIELD>1</KEYFIELD>
      </key>
    </Customers>
</stmt>
Refer this http://help.sap.com/saphelp_nwpi71/helpdata/en/44/7b7855fde93673e10000000a114a6b/content.htm
Hope this helps ....

Error in native SQL while inserting data into CORP table

Similar Messages

Maybe you are looking for