Error in new infotype creation

hi,
i m copying a infotype and create a new infotype, in this all structures are copied in my program but only one structure q0002 is not copied as q9002 .
tell me how to do this

Hi
Just copy the Qnnnn structure for yourself via SE11,
I think it is not automatically copied, because it is not part of IT 02. It is only part of the display dynpro.
regards,
karl

Similar Messages

About new infotype creation ?

Hi Experts,
I want to create new infotype in PD.
Will any one help me how to start with.
Before creating infotype whether we need to create structure.
How to create the structure HRI9xxx.
*Please give the step by step procedure and t-code to create theHRI9xxx structure,Pxxxx,any tables like T777 etc.
*Suggest some links to create these things.
*Give step by step procedure to create structure and Infotypes.
Helpfull answers are rewarded for sure.
Thanks,
Sakthi C

Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Enhancement of Infotype
Check the following
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
Infotype Enhancement overview screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
Reward points if uesful.

Error in New Models Creation - Loadbalancing /Single Server locally

Is there any possibility of below error when Creating New Models with Single Server and but NOT Working with Load balancing Option.
The same code worked when connecting to Single Server locally but doesn't work when New models were created by selection of loadbalancing Option on Remote Server..during development on source from DTR Server(SLD)..
I get below error when New Model created with loadbalancing option
Error - com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Error connecting using JCO.Client: null
Edited by: Raghu v on Jan 26, 2008 1:27 PM

Hi,
In EAS, I am getting some for Planning Outline(Essbase outline is working fine), While starting the Planning service through start menu, it throwing error as
Query Failed: SQL_SYSDB_DELETE_EXPIRED_EXTERNAL_ACTIONS:[100]
java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00932: inconsistent datatypes: expected INTERVAL DAY TO SECOND got NUMBER
     at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
     at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
     at hyperion.jdbc.oracle.OracleImplStatement.execute(Unknown Source)
     at hyperion.jdbc.base.BaseStatement.commonExecute(Unknown Source)
     at hyperion.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source)
     at hyperion.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source)
     at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
     at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
     at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unknown Source)
     at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source)
Error encountered with Database connection, recreating connections.
Nested Exception: java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00932: inconsistent datatypes: expected INTERVAL DAY TO SECOND got NUMBER
Thanks,
CP

Error of New report creation in BAM Active Studio

I just installed Oracle BAM. I entered in WEB-interface and selected Active Studio.
Then I pressed "Create a New report" Button. I've had the following message report:
The Data Object was deleted.
What shall I do to fix this problem? The error details see below.
Exception Message:
The data object "_Custom_Parameters" does not exist.
Stack Trace:
at Oracle.BAM.ActiveDataCache.DatasetSchema.Load()
at Oracle.BAM.ActiveDataCache.DatasetSchema.Get(Dataset oDataset, Boolean bCache)
at Oracle.BAM.ActiveDataCache.Dataset.LoadSchema(Boolean bCache)
at Oracle.BAM.ActiveDataCache.Rowset..ctor(Context oContext, Modifier oModifier, Boolean bReadOnly, Row oLooksertRow, Boolean bIncludeAllColumns)
at Oracle.BAM.ActiveDataCache.Rowset..ctor(Context oContext, Modifier oModifier)
at Oracle.BAM.Middleware.Persistence.Parameters.CustomParameter.GetAllCustomParameterIDs(Context oContext)
at Oracle.BAM.Middleware.ImportExport.ReportExporter.GetParametersXML(Int64 lReportId, Context oContext, IncludeCustomParameters eIncludeCustomParameters)
at Oracle.BAM.ActiveStudio.ReportEditor.EditReport()
Debugging Information:
The data object "_Custom_Parameters" does not exist. [ErrorSource="ActiveDataCache", ErrorID="ADCDataSetNotFound"] Debugging information: Oracle.BAM.ActiveDataCache.Common.Exceptions.DataObjectNotFoundException: The data object "_Custom_Parameters" does not exist.
at Oracle.BAM.ActiveDataCache.DatasetSchema.Load()
at Oracle.BAM.ActiveDataCache.DatasetSchema.Get(Dataset oDataset, Boolean bCache)
at Oracle.BAM.ActiveDataCache.Dataset.LoadSchema(Boolean bCache)
at Oracle.BAM.ActiveDataCache.Rowset..ctor(Context oContext, Modifier oModifier, Boolean bReadOnly, Row oLooksertRow, Boolean bIncludeAllColumns)
at Oracle.BAM.ActiveDataCache.Rowset..ctor(Context oContext, Modifier oModifier)
at Oracle.BAM.Middleware.Persistence.Parameters.CustomParameter.GetAllCustomParameterIDs(Context oContext)
at Oracle.BAM.Middleware.ImportExport.ReportExporter.GetParametersXML(Int64 lReportId, Context oContext, IncludeCustomParameters eIncludeCustomParameters)
at Oracle.BAM.ActiveStudio.ReportEditor.EditReport()
Assembly: ActiveStudio
State: Oracle.BAM.ActiveStudio.ReportEditor
Event: EditReport
xmlReportDef:
<Report type="tiled"><Layout maximize="true"><View id="view1" top="0.0%" left="0.0%" width="100.0%" height="39.5%" /><View id="view2" top="40.5%" left="0.0%" width="100.0%" height="59.5%" /></Layout><Views><View id="view1" /><View id="view2" /></Views></Report>

Looks like one of the system dataobjects wasn't properly loaded.
I believe you have some/most tables for the Active Data Cache (populated during install) because it appears you are able to start the Oracle BAM Active Data Cache service and get to the Start Page.
Here's the xml for the system dataobject that appears to be missing.
Note: I assume you have version 10.1.2.1, the latest version of BAM.
=========================
<?xml version="1.0" encoding="utf-8"?>
<OracleBAMExport Version="862.0" Build="3.4.5109.0">
<DataObject Version="14" Name="Custom Parameters" ID="_Custom_Parameters" Path="/System/Custom Parameters" External="0">
<Layout>
<Description><![CDATA[This data object contains user defined Custom Parameters that are available across all reports.]]></Description>
<Column Name="Name" ID="_Name" Type="string" MaxSize="64" Nullable="0" Public="1" TipText="The name of the Custom Parameter that appears in reports." />
<Column Name="Value" ID="_Value" Type="string" MaxSize="1000" Nullable="0" Public="1" TipText="The value of the Custom Parameter." />
<Column Name="Description" ID="_Description" Type="string" MaxSize="1000" Nullable="1" Public="1" TipText="Optional long description." />
<Indexes />
</Layout>
<Contents />
</DataObject>
</OracleBAMExport>
===========================
Paste this into notepad and save as customparameters.xml
Then import using DOS running this command:
icommand cmd=import file=filename.xmlThen try to recreate the report again.
Check that you have all system dataobjects in Architect:
System\Alerts\External Actions
System\Alerts\History
System\Custom Parameters\Custom Parameters
System\Views\Action Form Templates
System\Views\Chart Themes
System\Views\Matrix Themes
System\Views\Util Templates
Depending if you have installed and started the Oracle Plan Monitor service, you'll see this also:
System\Plan Monitor\Oracle BAM Plan Monitor\Journal
System\Plan Monitor\Oracle BAM Plan Monitor\Lock
System\Plan Monitor\Oracle BAM Plan Monitor\Plan Status
System\Plan Monitor\Oracle BAM Plan Monitor\Service Status
====================
IF you have any missing system dataobjects, I would suggest drop the Oracle user account used to install BAM so you would delete all it's tables. Then recreate the same user account with resource and connect privileges. Then run cacheinit.exe from your OracleBAM\BAM directory. This will recreate the entire ADC for you.
Sincerely,
Michelle

Error in new plant creation

Hi,
I have created one new plant by copying a standard plant. I copied this plant by coping all the tables from standard plant only. While creating PR for that new plant I am getting the following error u201C Valuation Area not definedu201D. Here the valuation area is maintained at plant level only. If I check in Account determination(Table T001k) the valuation area for that new plant not updated.
If I check plant tables getting error " Error in foreign key dependencies.
How to solve this issue? If any one face this kind of issue please let me know.

Hi,
Please check at spro log- mm valuation, wheather the plant is defined as valuation area or the company code.
if not please aagain copy the tables to the plant by copying function and check.
Regards,

Error in custom infotype creation

Hi
I have created a custom infotype IT9100 .
When I am seeing the screen layout in se51 information message
Element PSPAR-ITTXT touches or overlaps other element
ITTXT stores the infotype text
Now when I am activating my screen its showing error
Collision at target location.*
Could you please let me know how to deal with such prob.
P

Hi,
please check whether in the layout set may be those fields are overlaping.
generally i didnt get those type of messages.

Errors in New Field Creation via AET

HI All,
I am facing a problem while creating new fields in the Campaign UI via AET. We are using CRM 7.0 system.
I am creating this field in the Campaign Header (MKTPL_CPG).
When I am creating a field and clicking on the 'Save and Generate' button I am getting following two error messages:
1. Error Code: E064(AXT_MODEL): Error in Registry.
2. Error Code: E404(R8): DataSource 0CRM_MKTELM5_ATTR doen not exist in version A.
Any Idea what these messages relate to and how to rectify these.
Regards
Dave
Edited by: Dave on Apr 8, 2011 10:45 AM

HI Vishal,
Thanks for the reply, I have gone through the post, but i am afraid i am getting a different kind of error. In the post, I believe major problem is "Unknown Dynpro".
any way, I tried the AXTSHOW and AXT_EXT_GENERATE but no luck.
My major problem is "DataSource 0CRM_MKTELM5_ATTR does not exist in version A". I am not able to understand it. What I came to know is that this is some how related to BI. I checked into the Table SMOXHEAD but in vain.
One more point, since this field needs to be available in BI reporting, I have selected the Check Box for the same while creating this field in the UI.
Any other Ideas to work with?
Regards
Dave

Error during New Version Creation in Controlling

Hi
I am creating new version in Controlling (tried copying from existing Versions too), and getting the given below error message. We are working on SAP R/3 4.7.
Valuation in controlling area xxxx is inconsistent -> please check
Message no. KT340
Diagnosis
The result from checking the versions for controlling area xxxx is that you want to work with multiple valuations. However, the corresponding version settings are inconsistent.
System Response
The function is not performed.
Procedure
Navigate to the version settings in controlling area xxxx, choose Check valuation and correct your settings.
Please let us know the necessary action for this.
Thanks in advance
Satish

Check Note - 541197.
[Note 541197|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=541197]
Looks like more than one actual version is maintained for Controlling Area using multple valuation approach.
You can check inconstency through Transaction OKevn.

Error "No entry in table T589A for P" while creating new Infotype

HI,
I've created a new infotype (9605). All the tables, structures, screens etc. have been created using transaction PM01 successfully. But upon execution of Infotype from PA30, the infotype screen is displayed with the following error:
"No entry in table T589A for P"
Any input will be highly appreciated.
Thank you,
Farooq.

Hi Farooq,
Untill and unless the the field PSYST-IOPER is cleared explicitly in the program MP960500 (in PBO modules), this error should not occur.
Also is this error is coming only for 9605 infotype ? Also is any other info availaible in the error message such as entry in table t589a is not available for which value of OPERA (INS, MOD, DEL, LIS etc) ?
Regards,
Shrinivas

Creation of the new infotype

Hi All,
I am using the table control for my Infotype creation. i linked the internal table with the table control wizard. I added a check box in the table control ( which is not there in the internal table). i need to access this table control check box. how can i make it.
Please Kindly help me to solve this issue
Thanks
Yogesh.

Hi
Why you are using Table control for infotype creation? do as per the steps mentioned
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
if you need table control see this
Check the below links.
http://www.planetsap.com/howdo_a.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/content.htm
http://sap.niraj.tripod.com/id25.html
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
chk the demo prog:
DEMO_DYNPRO_TABCONT_LOOP
<b>Reward points for useful Answers</b>
Regards
Anji

Creation of new Infotype Important

Hi All,
I am using the table control for my Infotype creation. i linked the internal table with the table control wizard. I added a check box in the table control ( which is not there in the internal table). i need to access this table control check box. how can i make it.
Do i need to include the check box value in it.
Please Kindly help me to solve this issue
Thanks
Yogesh.

it will be a complex logic as such... Instead try using the same in internal table so that u can use it in a simple code manner...
Award Points and close duplicate threads...

Creation of NEW Infotype

Hello Experts,
I need to create new infotype ,which will be replica of Infotype-0008(basic pay). user can enter the wage types in that custom infotype.
is it possible????
Thanks & Regards,
Saurabh

"there are some employees who works extra apart from their regular position "
questions:
1. "there are some employees "--> do they have specific characteristic?
2. "who works extra apart from their regular position"-->
is the extra salary payment will be included in their regular payroll or will be paid separately or it is only to record the "extra work"? or
"work extra" is it a form like overtime payment?
if it will be included in the salary payment, you can create new wagetype and include it in in IT0014-IT0015 depends on the regularity of the payment.
"currently in custom infotype there is only limited information ie. position and pay scale area, groups n all and cost centers.."
did u mean "currently in IT0008" there is only limited info (position, pay scale area, groups ...)
please check or consider to use IT0014 and IT0015 -- sap standard infotypes for other extra payment not included in the Basic Pay.
best regards,
dhenny muliawaty (pei pei)

Creation of new infotype 9001

am trying to create the new infotype 9001 (PM01) for license but SAP not allowing.. asking access key to proceed further.. wot to do?
Shan

and also check this
Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level

Error while creating infotype message no. pg293

Hi guys,
I am creating a new infotype after creating the PS structure when i click on generate objects i get an error saying "An internal error has occurred" message no. PG293.
kindly provide a solution.
points will be rewarded.
thanks

INFOTYPE CREATION WILL BE TAKEN CARE OF THE ABAPER AS RAO SAID
AS THE OUT PUT WILL HAVE TO SEEN IN ALL THE SERVERS THIS IS A LITTLE BIT TECHNICAL WORK
Start transaction PM01, Create Infotype, by entering the transaction code.
You access the Create Infotype screen:
2. In the Infotype no. field, enter the four-digit number of the infotype you want to create.
When you specify the infotype number, please remember to enter any leading zeros.
3. Choose IT characteristics.
This accesses the Display View Infotypes: Overview screen.
4. Choose Table view   Display   Change.
This accesses the Change View Infotypes: Overview screen.
5. Create a new entry for your infotype.
You can create new entries by
choosing Edit   New entries or
copying an infotype entry with similar characteristics.
If you want to copy an existing entry, select the entry you want to copy and choose
Edit   Copy as.
6. Check the entries in the individual fields.
Result: You have maintained the characteristics of your infotype.
Please check the above config for maintaining your infotype in PA30 and also check your entries in T582A & S.
Edited by: Sikindar on Mar 9, 2008 8:23 PM

Error on PA infotypes

Hi,
    I got some errors while doing PA infotypes creation.please help me.
Short text
    A table name, specified in an SQL command, is unknown.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPFP50P" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
     not caught in
    procedure "READ_DATABASE" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    An invalid table name "PA9667" was specified in an Open SQL command:
    Due to one of the following reasons, the error occurs only at runtime:
    - the table name was specified dynamically, or
    - the SELECT clause, WHERE clause, GROUP-BY clause, HAVING clause, or
      ORDER-BY clause was specified dynamically.

Hi
Do the creation with the following steps correctly
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Enhancement of Infotype
Check the following
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
Infotype Enhancement overview screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
Regards
Anji

Error in new infotype creation

Similar Messages

Maybe you are looking for