Error in Notification Tab

Hi All,
In Portal Employees are not receiving the Notifications. When they click on the notification tab its giving some warning message.
as shown below.
SAP_ECC_Humanresources SomProviderConnector Jul 26, 2009 11:48:50 AM Exception occured
Exception type:com.sap.netweaver.bc.uwl.connect.ConnectorException Message:Sun Jul 26 11:48:50 EAT 2009
(Connector) :com.sap.uwl.som.provider.SomInboxProviderException:Exception on USER:com.sapportals.connector.ConnectorException: No User mapping set up for user USER.R3_DATASOURCE.KOALAS system :SAP_ECC_Humanresources, No User mapping set up for user USER.R3_DATASOURCE.KOALAS system :SAP_ECC_Humanresources
Please guide me in this issue.
Thanks & Regards.
Steffler.

Similar Messages

Error "the notification doesn't exists" when use BAPI_ALM_ORDER_MAINTAIN

Hi gurus, I have a problem with a BAPI_ALM_ORDER_MAINTAIN.
My order has 3 notifications on the tab "Objects" and I want to remove one. But when i called the BAPI, i get the error message "Notification 100047495 does not exist".
The content of the tables is:
IT_METHOD:
REFNUMOBJECTTYPE-METHOD-----OBJECTKEY
000001---HEADERCHANGE----000010009721
000001---OBJECTLIST-DELETE-----000010009721000100047495
000001--SAVE--
000010009721
IT_HEADER:
Data of the order.
IT_OBJECTLIST: The fields that have data are...
COUNTER -
3
FUNCT_LOC -
UR DE TEST
NOTIF_NO -
100047495
FUNCLDESCR ---UR DE TEST COMPAS
Any help?
Thanks in advance.

Can you try the following?
instead of this
000001---OBJECTLIST-DELETE-----000010009721000100047495
use
Ref # should be the item number in the object list
and key should be just the order number 000010009721
sample: 000002 -
OBJECTLIST---DELETE----000010009721

Notification tab

Hai everybody
I am learning P to P cycle through a pdf.
I am trying to create a Notification Tab on my APPS personal home page,
for that i have click worklist and in that i have to go in Customize.
when i click that it is asking for User Name and Password.
I am getting the error message like this
ERROR:WF_PLUG.EDIT_WORKLIST_DEFINITION: requires a username and password.
How to find the user name and password .
can anybody suggest me with a solution.
Thanks and regards

I am facing exactly the same problem !!! any answer ???

How to view iCal all day events in notifications tab?

First of all I really don't like the new iCal app in ios7 but for now I am dealing with it and am contemplating getting a new app to use for my calendar. However I am trying to make this one work first. One of the problems I have is if I have iCal events that are scheduled as "all day" events, and when I swipe down to view my notifications tab it says I have no events even when I have an event for that day. However it shows up if I have a time for that event, ex: 8:00 am to 10:00am.
Is this a bug or is there a way to get them to show up? I have everything turned on in settings for the notifications tab settings.
My other issue with iCal is I have two calendars (one for work and one for home) and when I view my month, I want to be able to see the color of the event i have planned on certain days, instead it just shows me a grey dot for the days i have something planned. My ipad with ios7 shows me the view I want my iphone doesn't, just grey dots. This forces me to actually click on the day and then try to scroll through the day timeline to find my event.....any help?

Did you ever get an answer on this? I can see everything in the DAY view but need to see the all day events in the week view. I have events that start on say the 15th and run to the 21st. I've started putting the end date in the location field but it was so much nicer when the all day even portion expanded to allow you to see all of them without having to scroll. Having to use the DAY view makes it really hard to schedule. Any chance this will change in the new version?

How can I get recent notifications to show up in UWL notification tab?

Hello,
Is it possible to get items that appear in the recent notification iView to show up under the Universal Worklist Notification tab.
For example, when I subscribe for documents in the KM document repository the subscriptions and any changes appear in the recent notification tab. How can I get them to show up in the UWL notification inbox? I've changed the subscription service channnel to add the variable Null on top of e-mail and it does not work.
Your help would be greatly appreciated.
Thanks in advance
Rabih

Location services can run the battery down, so i'd like to know as well, with location disabled.
I have location on for Find My iPhone only, and i'd prefer to keep it that way.
I don't know why they had to mess with the weather in notification center, it was totally great the way it was.
I also have 4s with iOS7.

Error handling notification type=Platform...

The message below occurs in our logs in batches of 7 or 8 occurrences over a few ms and separated by a gap of 4-20s. It's been happening for days. The erroring storage node is not the senior node. There is no noticeable service impact. This is a dev cluster consisting of has 8 storage, 4 proxy , 1 MBean server and 4 other process nodes. There is very little load on it. The platform is SunOs 5.10 on x86.
What does it mean?
2013-01-31 19:05:36,514 [Logger@9240084 3.7.1.5] DEBUG Coherence 2013-01-31 19:05:36.514/636281.198 Oracle Coherence GE 3.7.1.5 <D5> (thread=Invocation:Management, member=11): Error handling notification type=Platform,Domain=java.lang,subType=GarbageCollector,name=PS Scavenge,nodeId=2

Hi,
The log message implies that parallel eden/surivor space collector is running on member with id =2. I don't think it implies any immediate issues but I would recommend to check you heap space graph for the node and also spit gc logs using -Xloggc:<file_location> -verbose:gc and see if the GC is tuned correctly.
HTH
Cheers,
NJ

Error viewing variables tab after running edit UI

Hi,
I have a problem that seems to be somewhat like this:
http://forums.ni.com/t5/NI-TestStand/Error-viewing-variables-tab-in-Runtime-Operator-Interface/m-p/1...
The VI I am trying to run is an edit substep of a step type. LabVIEW checks to see if the "Step.Setup.ReadMeasName" property exists, populates a listbox with it if it does. Another listbox with all the available measurement names also appears on the UI. The user has an Add and Remove button to remove measurements from the "ReadMeas" listbox or add them to it from the "MeasNames" listbox. Multiple names can be added/removed at once depending on whats selected when the buttons are pressed. Once "Done" is clicked the VI writes the"ItemNames" property of the "ReadMeas" listbox to "Step.Setup.ReadMeasName", using a Set Property Value node which is passed the TestStand Sequence Context. If the property doesn't exist it creates it.
The only time I have any problem is when I try to remove items from the property after it is already initialized (i.e. not empty). In other words, if I run the VI from teststand, put several measurement names into "ReadMeas" click done, run the VI again (the names already added appear in the box when the UI comes up, LabVIEW reads "Step.Setup.ReadMeasName" ), and then remove some of the names. IF I had "ThisContext.Step.Setup.ReadMeasNames" opened in the step "Variables" tab when trying to remove the names this message appears in the Variables tab: "One or more errors have occurred. Please Save your work and restart the application." If I make sure not to have "ThisContext" expaded in the variables tab, but check the property before and after removing names from the list it does work properly and there is no error.
This isn't a big deal becuase I doubt the end-user will be checking to see that the property actually got populated, but I still would like to fix the bug if possible. I've installed the patch for TestStand 2010, and the .Net framwork 4.0. Anyone have any idea what could be going on here?
Thanks,
-Josh
Solved!
Go to Solution.

Josh -
It looks like you're running into a Known Issue 193751, which is documented in the TestStand 2010 and 2010 SP1 Known Issues List. This is an issue that we intend to fix in a future version of TestStand.
I hope this helps and am sorry for any inconvenience this issue may be causing you.
Manooch H.
National Instruments

Error in Analyse Tab

Hi
I have received following error after analyse tab from db13
SAPDBA: Error - in analyzing index SAPR3.DSYAD~0
        of table DSYAD!
30.12.06 09:50     ORA-08100: index is not valid - see trace file for
                   diagnostics
Please suggest a solution.
Regards
Pankaj

Pankaj
This Error is very strange error, Have a look on trace file which is generated at user_dump_dest and alert<sid>.log file.
Reasons may be index might be corrupted or invalidated.Or may be due to block corruption.And there are some bugs on specific platforms for this error.
Try to drop and recreate index and analyze or better contact customer support with trace file.
Regards
Vinod

Error formatting Cross-Tab table

Hello!
My CR2008 reports include many cross-tab tables and till now, everything went smoothly.
...till I got the message "Error formatting Cross-Tab table" while viewing the print preview.
Technically the error comes up while clicking one of the groups itemized on the left.
The database hasn't changed. Besides it happened with two different reports associated with two different data bases.
Any idea ?
Any help would be appreciated as I've been lost for a while.
Thib'

Before I received your answer (thanks a million by the way), I have been installing/un-installing subreports in the main report 'til the 'Error formatting Cross-Tab table' stops.
The Error stopped occurring when I added a small Group Footer in the subreport : apparently the Error had begun when I had put it to a zero-height.
Having said that, an hour later and many changes here and there, I have just put a zero-height again and no Error anymore...
> Check in the main report design tab to see if the width of the subreport fits within the page of the main report.
> If it doesn't try shrinking the subreport to fit.
Within 'an hour later and many changes here and there', I did the opposite : I widened a subreport which did not fit in the main report. And the Error isn't raised anymore.
> What happens if you drill into the subreport?
You mean if I double-click the subreport to edit it ?
If that is your question, no Error has ever been raised in the subreport : always in the Preview tab of the Main Report.
Sorry for describing such an irrational behavior.
I will categorize my question as answered but if you have any idea, I'd be delighted : I feel like this can happen again and I'd be less under stress to know what detail/ 'parameter' makes CR raise this Error. But your hint about the subreport fitting or not within the main report might be a clue.
Thank you again
Thib'

Receiving an 'Error formatting cross-tab object' error when paging through preview

I have a report with two subreports in the group footer. One of the subreports contains a cross-tab report. When I preview the report as a whole, occasionally I get an error formatting cross-tab object and then no more pages of the report are displayed. If instead I choose to export the report to pdf, Crystal Reports crashes. Any ideas on what might be causing these problems?

Actually, you can search for them by entering the KBA number in the search box in the top right corner of this web page. KBA 1214209 comes up fine. KBA 1212875 does not, but it's not really applicable.
While we are at the search box, see if a search term like 'crystal cross tab' (or something like that) bring up other KBAs.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

My notification tab isn't pulling down and the tab on the bottom isn't pulling up either?? Please help

So I was typing something and out of nowhere this thing comes up and I accidentally hit a button and did something. I don't know what I did or how I did it but now my notification tab and the bottom tab aren't pulling up/down

I don't think you can disable either Notification Center (top of screen) nor Control Center (bottom of screen). You might try resetting your phone...it's been known to cure many odd quirks:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

Not display notification in Notification tab

Hi All,
I would like to have an only "Notification" Tab in UWL.
So, I went to System Admin> System Config > Universal Worklist Admin
Then went to Universal Worklist Content Configuration
Then Click to Configure Item Types and Customize Views Using a Wizard
Edit Main page by removed all tab except "Notification" tab.
then I created a subcription for one document in KM.
For user1 whom has existing notifications, the new notification (above one) displayed fine.
But for user2, tested notification doesn't display in UWL iView.
Any configuration that I missed?
Many thanks for all comments.
Regards,
Kanok-on K.

Hi,
maybe you have some cache to clean.
You can also try to close your browser, clear your local and portal cache and relogging again.
Fabien.

Missing notifications tab mavericks

Okay so I have a bit of a bug where my mac wont show the little notifications tab on the side beside the search pls help

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Clicking assign in Notification tab get empty list of Email Name

I make Email Definitions:
First - Provisioning Related
Second - Request Related
screenshot:
http://img28.imageshack.us/img28/8513/emaildefinition.png
Then I make a process task "MAIL" in provisioning process of resource. I try to assign email in notification tab, but get empty list.
screenshot:
http://img248.imageshack.us/img248/5773/mailprocess.png
Maybe, there is some customization else?

Hey,
Just check the value of User Language and User Region attributes in System Confirguration through design console.
Verify both the values are same like en and us.
Regards
Alabhya Goel
Edited by: Alabhya Goel on Jul 21, 2010 5:14 AM

Notifications tab in UWL not working

Hi,
I have created a task of type Send Notification in UWL and send it to a user. This user didn't receive any notification in his Notifications tab in UWL.
I noticed that I have problems with the Notifications tab at various types of tasks.
Do you know what might be the problem? Please help me.
Thank you in advance.

Hi Ashutosh,
I have found the reason. The user <b>WF - Batch</b> in sap erp, which is using the RFC Destination for workflow, was locked. Well, it is a a little bit strange for a cummunication user that he becomes locked. Unlocked him, now all works.
Thanks for your support.
Regards,
Frank

Error in Notification Tab

Similar Messages

Maybe you are looking for