Error in NW2004S / EP7 installation (AIX & Oracle)

Hi,
I'm getting an error when installing EP7 / NW2004S on AIX 5.3, Oracle 10.2.0.2.... the installation is failing at step "Install software units" when it tries to deploy the online SDAs. The error in the log is:
 Caught exception while checking the login credentials for SAP J2EE
 Engine. Check whether the SAP J2EE Engine is up and running.
 com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot
 connect to Host: [<hostname>] with user name: [Administrator]
 Check your login information.
 Exception is:
 com.sap.engine.services.jndi.persistent.exceptions.NamingException:
 Exception while trying to get InitialContext. [Root exception is
 com.sap.engine.services.security.exceptions.BaseLoginException: Cannot create new RemoteLoginContext instance.]
 (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
I've discovered that I also get this message when I try to log into Visual Administrator ("com.sap.engine.services.security.exceptions.BaseLoginException: Cannot create new RemoteLoginContext instance"). However the SAPJ2EE engine is running, and the password is correct - I can log into the j2ee websites with it (http://<hostname>:50000/useradmin, http://<hostname>:50000/sap/monitoring/SystemInfo etc.).
I've looked up this error on SAP notes & SDN and tried the solutions suggested - checking the Administrator password is correct in the Secure Store and checking the Login Modules but with no success. SAP note 701654 says that the error suggests a connection problem rather than a password problem, but I can telnet to port 50004 from other servers so not sure what the issue is.
Any suggestions gladly welcome!
Many thanks & regards
Jane

The problem might be (it appears to me), that the system itself is running but name resolution (DNS or /etc/hosts) is not working.
Can you ping your machine using the NAME?
Markus

Similar Messages

JSPM error in NW2004s SR1 installation

Hi,
I have just freshly installed NW2004s Application Server SR1. Then I tried to run JSPM to patch it up. When logging onto SDM as the first screen in JSPM, I got the following error:
The execution ended in error.
com.sap.sdt.util.diag.DevelopmentSupportRequiredException: Assertion failed for (Could not parse version string content. For input string: "${SP-Patchlevel}") at com.sap.sdt.util.diag.SDT.check(SDT.java:36).
More information can be found in the log file C:\usr\sap\JAV\JC01\j2ee\JSPM\log\log_20060727155309\JSPM_PROCESS_1_01.LOG.
When I looked at the JSPM_PROCESS_1_01.log, I found the followings at the bottom of the log:
#1.5#C000C0A801650000000000AE0037FB1E000419908952E9A0#1154008476740#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_PROCESS##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:796)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:796)#Java###Phase status is .#1#aborted#
I've already had my JAVA_HOME and PATH set already, and they both point to the same JDK (which is the only JDK I have in the machine). SDM doesn't seem to have problems as I can logon with the remoteGUI in SDM. Does anyone have any idea what's wrong or what I'm missing?
Thanks,
Marc

Hello Marc,
I ran into the same issue. After a lot of trial and error I eventuelly found out, was the problem was...
I had to do two things to resolve this:
1. Download the XML file containing the SP stack definition:
-You'll find the instructions for downloading this file on the Support Package Stacks Download Page for NW2004s in the box 'Additional information'.
-Put the XML file in the JSPM inbox (Folder '/usr/sap/trans/EPS/in' on a standard installation).
2. Update the SDM:
-Download the file with the description 'SP07 for SAP SOFTW. DELIV. MANAGER 7.00' from the Support Package Stacks Download Page
-SAP Note 860939 explains how to update the SDM
Hope this helps...
Regards,
Bjoern

Pin_setup script error during BRM software installation on Oracle 11g

Hello experts,
Please help me fix the following error that occurs during Billing and Revenue Management software installation.
After I installed Third-Party, SNMP and BRM base package softwares, I edited the /opt/portal/7.4/setup/pin_setup.values file as recommended in installation guide and when I run pin_setup script, I get the following error message:
PATH variable IS O.K...
LD_LIBRARY_PATH variable IS O.K...\n
You are the pin user
You are in the pin group\n
Starting setup.\n
+#===========================================================+
+# Installation started at Wed Mar 23 10:48:02 2011.+
+#===========================================================+
User: pin
Password: pin
Alias: pindb
NLS_LANG environment variable: American_America.UTF8
Unable to connect to the database ( Oracle Error ).
Please make sure you entered the correct 'user', 'password', and 'alias'
for MAIN_DB in pin_setup.values, and that the NLS_LANG environment variable
is correct. Then run this install program again.
I'm able to access database using sqlplus pin/pin@pindb, listener is working fine, database is up, tnsping pindb also works fine
Please, which symptoms do you need in order to figure out where the issue is? How ot can be fixed?
Thank you,
Adrian

hello,
Error fixed.
Thank you,
Adrian

DISPLAY issue Oracle Database 11gR2 Installation On Oracle Linux 6

Hello All,
I am trying to install Oracle 11gR2 on Oracle Linux 6. I get the below error when running the installer.
[oracle@oelinux database]$ pwd
/home/oracle/install/database
[oracle@oelinux database]$ ls
doc install response rpm runInstaller sshsetup stage welcome.html
[oracle@oelinux database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 38234 MB Passed
Checking swap space: must be greater than 150 MB. Actual 3023 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Appreciate your help in advance. Thanks.

Dude wrote:
VNC certainly has it's beauty and advantages. I was under the impression though that the OP is trying to run OUI on a local server console that is runnig a graphical desktop. If that wasn't the case, VNC was certainly a preferable option.I have not done a local GUI console installation of Oracle in years. In fact, I'm known to start foaming at the mouth when discovering a server running X on the console, disabling it interactively, preventing initlevel 5 from ever loading X again, and leave comments of my disgust in inittab. ;-)
If I'm not mistaken then the vncserver does not need to have the X server running since the necessary support is built-in. The installation of X libraries is probably still required, but I'm not sure.It needs a X display manager. And xterm. twm does fine as display manager. Small and minimalistic. Not the greatest of ideas loading an entire Gnome desktop in VNC.
Btw, Apple Mac OS X provides seamless X11 support and uses VNC for screen sharing and even for installing a system remotely. If you use Apple Mac to access a remote Linux system, using ssh with X forwarding is very convenient as it works right out of the box without having to configure the remote Linux server.Nice. OS/X has come a long way the last few years. I recall a time when they pretended there was no "stinking" command line. :-)

Installation Of Solman 7.1 aix Oracle failed with Java Error

Dear All,
We are doing SOLMAN Installation 7.1 SR1 AIX Oracle.
Now the installation stopped at the 19th phase "IMport ABAP"as in the attached screenshot.
OS : AIX 6100-07-02-1150
Database: Oracle 11.2.0.3
Java Version currently maintained: java version "1.4.2"
When i checked in log File import_monitor.java.log ( /tmp/sapinst_instdir/SOLMAN71/SYSTEM/ORA/CENTRAL/AS) ,
[root@solmantrg: /tmp/sapinst_instdir/SOLMAN71/SYSTEM/ORA/CENTRAL/AS] cat import_monitor.java.log
java version "1.6.0_45"
Java(TM) SE Runtime Environment (build 6.1.051)
SAP Java Server VM (build 6.1.051 23.5-b02, May 30 2013 05:04:21 - 61_REL - optU - aix ppc64 - 6 - bas2:197575 (mixed mode))
Required system resources are missing or not available:
Import directory '/cddumps/Solman_Export_Cds/51042607_1/DATA_UNITS/EXP1' does not exist;
Import directory '/cddumps/Solman_Export_Cds/51042607_1/DATA_UNITS/EXP2' does not exist;
Import directory '/cddumps/Solman_Export_Cds/51042607_2/DATA_UNITS/EXP3' does not exist;
Import directory '/cddumps/Solman_Export_Cds/51042607_2/DATA_UNITS/EXP4' does not exist.
[root@solmantrg: /tmp/sapinst_instdir/SOLMAN71/SYSTEM/ORA/CENTRAL/AS]
Also i checked all the above import Directories [
'/cddumps/Solman_Export_Cds/51042607_1/DATA_UNITS/EXP1'
'/cddumps/Solman_Export_Cds/51042607_1/DATA_UNITS/EXP2'
'/cddumps/Solman_Export_Cds/51042607_2/DATA_UNITS/EXP3'
'/cddumps/Solman_Export_Cds/51042607_2/DATA_UNITS/EXP4'
] and all the above import directories are present in my system.
Later from the above log, i compared the Java Version of our System
[root@solmantrg: /tmp/sapinst_instdir/SOLMAN71/SYSTEM/ORA/CENTRAL/AS] java -version
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142ifx-20110630 (SR13 FP10) (JIT enabled: jitc))
[root@solmantrg: /tmp/sapinst_instdir/SOLMAN71/SYSTEM/ORA/CENTRAL/AS] which java
/usr/java14_64/jre/bin/java
Kindly clarify the below Queries.
1)Is the above Solman installation error was due to Java version? If so, do we need to install java version "1.6.0_45" in Solman Server to proceed with the installation.
2)Cant we proceed the Solman installation with the current Java version (java version "1.4.2") of our System .
3) What is the actual Prerequistes to be maintained for JAVA. I have downloaded the Installtion guide from SMP.
but in the installation guide, The exact java version to be maintained to proceed with the Solman Installation 7.1 SR1 is not mentioned anywhere.
4)If we install the Java 1.6, do we need to start Solman installation from the scratch . Any reboot required after installing java 1.6?
5)Because of the inconsistencies in java version in our System, The installation shows the Error " Import directory does not exist "?
6)Please tel the cause of the Error
Kindly assist to proceed with the installation
Regards,
Gayathri.K

Hello Gayathri
The import_monitor.java.log says the JRE used is 1.6 - java version "1.6.0_45"
There must be multiple JRE's installed on the system.
Run the below command and check the output
ls -lad /usr/java*
Few things I would try.
Is the '/cddumps/Solman_Export_Cds/51042607_1/DATA_UNITS/EXP1' an NFS mount ? If yes use a local file system.
Create a directory called /SMINSTALL and move all from /cddumps/Solman_Export_Cds
It should look like /SMINSTALL/51042607_1/DATA_UNITS/EXP1
Start the installation.
Try to use Java 1.4 or 1.5 and see if that helps.
You need to set the environment variable JAVA_HOME before starting the installation.
export JAVA_HOME=/usr/java14_64/jre
Are there any files/directories under 51042607_*/DATA_UNITS/EXP* ?
Regards
RB

Error in nW2004 installation -ORacle

i have to install Nw2004 Server
I installed ORacle 10.2 Server and when i proceed wiht the BW2004 installation it is giving me a message as follows
"oracle not present in the host. Please install oracle"
Please help me in this

hi,
Check installation steps ... selection oracle home ... you should select 10.2 ..
Regards
Ben

Error during the installation of ORACLE 10g for SAP MDM 5.5

Hi all,
I am installing ORACLE 10g on a SUSE LES 9 for a future MDM 5.5 system. While I launch the Installer I get the following error:
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-09-26_07-11-46AM. Please wait ...oracle@mucsapt2:/home/lrougkal/OraDb10g/database> Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2007-09-26_07-11-46AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
 at java.lang.ClassLoader$NativeLibrary.load(Native Method)
 at java.lang.ClassLoader.loadLibrary0(Unknown Source)
 at java.lang.ClassLoader.loadLibrary(Unknown Source)
 at java.lang.Runtime.loadLibrary0(Unknown Source)
 at java.lang.System.loadLibrary(Unknown Source)
 at sun.security.action.LoadLibraryAction.run(Unknown Source)
 at java.security.AccessController.doPrivileged(Native Method)
 at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
 at sun.awt.DebugHelper.<clinit>(Unknown Source)
 at java.awt.Component.<clinit>(Unknown Source)
I have installed all the required packages from SUSE :
binutils-2.15.90.0.1.1-32.10
gcc-3.3.3-43.41
gcc-c++-3.3.3-43.41
glibc-2.3.3-98.61
gnome-libs-1.4.1.7-671.1
libstdc++-3.3.3-43.41
libstdc++-devel-3.3.3-43.41
make-3.80-184.1
pdksh-5.2.14-780.7
sysstat-5.0.1-35.7
xscreensaver-4.16-2.6
Any ideas?
Thanks in advance,
Loukas

Hi Elmar,
I have checked the packages and the XFree86-libs-4.3.99 is not installed. I guess I will have to install it.
Now your question about oracle user. I am not sure if you have performed any SAP MDM installation with ORACLE RDBMS but the installation guide is totally different than the normal SAP inst guides. Indeed someone needs to install separately SAP MDM and ORACLE and in my installation I do not install NetWeaver since it is not mandatory for the testing phase of the project. You can have a look at the guide (it is very poor -no reference to ORACLE details):
https://websmp105.sap-ag.de/~sapidb/011000358700000271882007E
So the official ORACLE inst gudie says to install the ORACLE software with the oracle user.
Rgds,
Louka

SAP BOBJ XI 4.0 installation on AIX+oracle

Hi,
I want some information regarding
SAP BO xi 4.0 AIX 6.1+oracle 10g installation
Any konw how to install SAP BO Xi 4.1 on AIX+oracle.
Please give the step how to implement crystal report+tomcat... and soo many tools.
amit

Hi Waverly,
No, I have the install doc, what I can't find is the actual installation files.
Seperate sources indicate it is either already available or not available until August. I suspect the later is the case, since we aren't in ramp up.
Thanks and best regards,
Russ

Error running universall installer using Oracle 11g on Windows server 2003

Hi,
I want to uninstall Oracle 11g on Windows server 2003 and when I run universall installer I receive the following error
Checking swap space: 0 MB available, 500 MB required.
Please advise how to resolve this error and the procedure to uninstall Oracle 11g on Windows server 2003
Thanks,
Ant

Hi;
For swap problem, please check:
Swap space problem on Windows XP
http://www.pcnineoneone.com/howto/swpfile1.html
For remove process please check:
Oracle 11g on Windows Srv 2003
WIN: Manually Removing all Oracle Components on Microsoft Windows Platforms [ID 124353.1]
Regard
Helios

Error in the assistant of installation of Oracle 9ias 9.0.2 single sing-on

Install oracle 9ias 9.0.2.0, but when this in the assisting existing Oracle 9ias single singn-on the error that the host or port are not been worth appears. in the host sijita.uptc.edu.co places and in the port 7777. That it can be the error??? one doesn't also eat to pull up the Apache service because the following error appears:
$ apachectl start
Syntax error on line 6 of /u06/oracle/ora9ias/Apache/Apache/conf/mod_osso.conf:
Unable to deobfuscate the SSO server config file,
/u06/oracle/ora9ias/Apache/Apache/conf/osso/osso.conf, error Bad padding
pattern detected in the last block.
/u06/oracle/ora9ias/Apache/Apache/bin/apachectl start: httpd could not be started
WARNING!! Direct use of apachectl within Oracle9iAS is
deprecated. Using apachectl in conjunction with opmn may lead
to unexpected behavior (such as opmn automatically restarting
OHS after it has been shutdown using apachectl). Please use
dcmctl (located at ORACLE_HOME/dcm/bin/dcmctl) instead.
apachectl may not be shipped with future versions of Oracle9iAS.
$ httpd start
Ouch! ap_mm_create(1048576, "/tmp/apache/logs/mm.1262") failed
Error: MM: mm:core: failed to open memory file (No such file or directory):
OS: No such file or directory

9iAS (9.0.2.0.1) is desupported and will not be certified against any new OS releases...
Regards,
Martin

ABAP Engine Installation on AIX / Oracle

Dear Team.
We want to install the ABAP engine on the AIX / Oracle Clustered Environment on we have EP 7.0 installed.
Can anyone guide as to how this can be achieved.
Any help will be appreciated.
Thanks,
Prashant.

same as above
I suggest getting a Basis consultant on site, someone, who knows HACMP, can have a look at your current configuration (quorum, clusters filesystem et al) and can give suggestions, what´s the best and safest way to setup an additional system and if you need downtime according to your configuration or not.
Markus

Issue installing PI 7.1 EHP1 on AIX,Oracle

Hi Friends,
I am installing PI 7.1 EHP1 on AIX,Oracle.Iam facing some issue during installation(25th phase of installation).
I have 10 Gb RAM and 20 Gb SWAP.
Do you have any idea?
sapinst.log:
13.10.2009 11:02:22
GetProcessList
FAIL: NIECONN_REFUSED (Connection refused), NiRawConnect failed in plugin_fopen()
INFO 2009-10-13 11:02:22.229
Connect to message server (s0001079/3901) succeeded.
INFO 2009-10-13 11:02:22.229
Disconnect from message server (s0001079/3901) succeeded.
WARNING[E] 2009-10-13 11:02:22.240
CJS-30087 Instance XDN/SCS01 [PARTIAL] did not stop after 2:00 minutes. Giving up.
ERROR 2009-10-13 11:02:23.421
FCO-00011 The step stopInstance with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|1|0|stopInstance was executed with status ERROR .
WARNING 2009-10-13 11:02:23.576
Could not get property IDs of the JavaScript object.
ERROR 2009-10-13 11:02:23.577
FJS-00010 Could not get value for property .

Hi Milos,
The problem is with the starting of the SCS instance by sapinst, on AIX the port that we used (SAP default) 3901 during the input step for SCS was in usage at AIX by some application
nimsh 3901/tcp # NIM Service Handler
nimsh 3901/udp # NIM Service Handler
I had to free up the port for some time, stop processes running on the port and then continued with my installation. After the installation was complete, I changed the port number of SCS to 3601 and gave the port back to AIX application.
Beaware that you have to change the port number is various places, including Config tool, all the JSPM, Configtool properties
Check if this helps to resolve your problem, else I will have to recollect if I resolved it differently.
Regards,
Nilesh

Problems with WAS 6.40 Installation on Oracle - Phase 11 of 34

Hello,
Problems with WAS 6.40 Installation on Oracle (Phase 11 of 34)
with the installation of the Web Application server 6,40 SR1 on a Oracle server I get in phase 11 of 34 (Create Oracle Database) the following error-message:
CJS-00084 - SQL statement or script failed. Diagnosis: Error message: ORA-12547: TNS:lost contact.
error while loading shared library: libodm9.so : cannot open shared object file: No such file or dirctory.
Best Reagrds,
Ralf Steffens

hi Ralf
i've found one composite note for Oracle <a href="https://websmp203.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001366932002">505630</a>
hope this solves...
Symptom
ORA-12547: TNS:lost contact
Brbackup, brarchive, brrestore or brconnect may terminate with errors similar to the following:
BR301E SQL error -12547 at location BrDbConnect-1
BR301E SQL error -12547 at location dbf_info_get-1
Sapdba returns the following error, for example:
SAPDBA: ORACLE error -12547 occurred while checking instance status!
The R/3 work processes or R3trans return the following error at Connect:
C *** ERROR => CONNECT failed with sql error '12547'
Other terms
TNS-12547, TNS-00517
Reason and Prerequisites
As part of the Net8 Connect, a program such as the R/3 kernel, R3trans, svrmgrl, sqlplus or ODMA establishes a connection to the Oracle database. If the connection terminates due to problems at the server end, it can result in ORA-12547.
Additional information for the error is often available in sqlnet.log. In many cases, other messages that are not reported by all tools precede ORA-12547. If ORA-12547 occurs when the ODMA accesses the old Oracle-Home during a database upgrade, for example, it may make sense to temporarily restart ORACLE_HOME on the old Oracle-Home for test purposes and then to execute sqlplus or svrmgrl.
Even if sapdba or the BR tools terminate with an ORA-12547 when calling sqlplus or svrmgrl recursively, you should, for test purposes, call sqlplus or svrmgrl manually with the operating system user that was used.
Hopefully, a more informative error message will appear in addition to ORA-12547, for example:
ld.so.1: oracleC11: fatal: relocation error: file
 /oracle/C11/817_64/libx8.so: symbol ksunsga_:
 referenced symbol not found
If you find accompanying error messages of this type, start a note search with the corresponding search terms since we are often aware of the problem and a solution may already be available. If you do not find any significant error messages or a suitable note, check the following possible causes for ORA-12547:
1. UNIX: Incorrectly linked Oracle tools
2. UNIX: Problems with XPG4 compliance and s-bit
3. Too many requests to the listener at the same time
4. HP-UX, Oracle 8.1: Missing OS patch
5. Use of CRYPTO parameters in sqlnet.ora
6. AIX: I/O Async is deactivated
7. Resource problems
8. The CONNECT_TIMEOUT_LISTENER parameter in listener.ora is too low
9. Activated Oracle trace
10. UNIX: Incorrect oracle executable authorization
11. SOLARIS: LD_LIBRARY_PATH set when you call ODMA
12. AIX: Problem with post/wait kernel enhancement
13. UNIX: Problems with the libobk library
14. SOLARIS: Incorrect search sequence in the path variable
15. UNIX: Conflicts between 32-bit and 64-bit files
Solution
1. Relink the Oracle software as ora<sid> with
cd $ORACLE_HOME/rdbms/lib
make -f ins_rdbms.mk install
 or
relink all
1. See Note 88884.
2. If individual work processes terminate with ORA-12547 when you start an R/3 instance, See Note 131561.
3. See Note 399610.
4. You can set security parameters that begin with SQLNET.CRYPTO_ in sqlnet.ora as part of the Advanced Security Option. Oracle releases < 8.1.7 cannot process these parameters correctly and result in ORA-12547. In this case, delete these types of parameters from sqlnet.ora.
5. If I/O is deactivated on AIX Async, the Net8 Connect fails with ORA-12547. In this case, activate I/O Async by using smitty.
6. Insufficient resources such as available memory on the database server can cause ORA-12547. For more information, see 384839.
7. In individual cases, it may make sense to increase the CONNECT_TIMEOUT_LISTENER parameter in listener.ora (for example, by 5 seconds, so from 10 to 15). Although a value of 10 seconds should usually be sufficient to establish a connection.
8. Delete the log files written by the Oracle trace in accordance with Note 92537.
9. Check to see whether the executable in $ORACLE_HOME/bin has the "rwsr-s--x" authorizations and the ora<sid> owner and correct this if necessary.
10. If you call ODMA on SOLARIS as part of a database upgrade and if LD_LIBRARY_PATH is set explicitly (on the lib directory of the target release), calling the old Oracle software through ODMA may fail with ORA-12547. If you use the old ORACLE_HOME to list sqlplus or svrmgrl, you get the following error:
ld.so.1: oracle<sid>: fatal: relocation error:
 file /oracle/<sid>/817_64/libx8.so: symbol ksunsga_:
 referenced symbol not found
ORA-12547: TNS:lost contact
 In this case, permanently delete LD_LIBRARY_PATH from the environment. This does not have any negative effects since the libraries are automatically found in the correct directories as of Oracle 8.1.
 If problems occur with the post/wait extension on AIX, the following type of errors will be displayed:
exec(): 0509-036 Cannot load program oracleC11 because of the
following errors:
 0509-130 Symbol resolution failed for oracle because:
 0509-136 Symbol pw_post (number 2524) is not exported
 from dependent module /unix.
 0509-136 Symbol pw_wait (number 2525) is not exported
 from dependent module /unix.
 0509-136 Symbol pw_config (number 2526) is not exported
 from dependent module /unix.
 0509-192 Examine .loader section symbols with the
 'dump -Tv' command.
ORA-12547: TNS:lost contact
1. If the libobk library was created incorrectly, the following type of errors may occur:
/oracle/C11/817_64/bin/oracle: /sbin/loader:
 Fatal Error: Cannot map library libobk.so
/usr/lib/pa20_64/dld.sl: Unable to find library
 '/oracle/C11/lib64/libobk.sl
exec(): 0509-036 Cannot load program oracleC11 because of the
 following errors:
0509-150 Dependent module /oracle/C11/817_64/lib/libobk.a(shr.o)
 could not be loaded.
0509-152 Member shr.o is not found in archive
ORA-12547: TNS:lost contact
 Check to see whether libobk exists and, if it is a link, that it points to a valid object. Note 142635 contains more information about this. The libobk link may point to this if a libsbtsh8.* file exists in the Oracle library directory. If you are using a third-party Backint tool, contact the relevant supplier, since libobk often has to point to a backint-specific library.
1. If an error such as
ld.so.1: ./svrmgrl: fatal: libucb.so.1: open failed:
 No such file or directory
ORA-12547: TNS:lost contact
 occurs, the PATH has probably been set incorrectly. For more information, see Note 44361.
1. If an error such as
ld.so.1: oracle<sid>: fatal: <library> wrong ELF class: ELFCLASS64
ORA-12547: TNS:lost contact
 concerning "wrong ELF class" occurs, check whether the <library> mistakenly has a different bit size than the tool that was called. You can determine this using
file <library>
file <tool>
 All the files involved must uniformly be either 32-bit or 64-bit.

Regards
Arunkumar

IMPORT MONITOR JOBS ERROR IN ECC 6 INSTALLATION

WARNING 2014-12-18 23:54:18
Execution of the command "C:\Program Files\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "E:\ECC EXPORT 1\EXPORT_51031897-1\EXP1;E:\EXPORT 2\51031897-2\EXP2;E:\EXPORT 3\51031897-3\EXP3;E:\EXPORT 4\51031897-4\EXP4;F:\EXPORT 5\51031897-5\EXP5;F:\EXPORT 5\51031897-5\EXP6;F:\EXPORT 5\51031897-5\EXP7;F:\EXPORT 5\51031897-5\EXP8;F:\EXPORT 5\51031897-5\EXP9;F:\EXPORT 5\51031897-5\EXP10;F:\EXPORT 5\51031897-5\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe F:\usr\sap\AMC\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 103. Output: java version "1.4.2_13"Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)Import Monitor jobs: running 1, waiting 3, completed 68, failed 0, total 72.Import Monitor jobs: running 2, waiting 2, completed 68, failed 0, total 72.Import Monitor jobs: running 3, waiting 1, completed 68, failed 0, total 72.Loading of 'SAPAPPL1_14' import package: ERRORLoading of 'SAPAPPL2_2' import package: ERRORImport Monitor jobs: running 1, waiting 1, completed 68, failed 2, total 72.Import Monitor jobs: running 1, waiting 1, completed 68, failed 2, total 72.Loading of 'D010TAB' import package: ERRORImport Monitor jobs: running 0, waiting 1, completed 68, failed 3, total 72.
this is the error i'm getting
i started oracle instance through command prompt but in vain. only four jobs r not completing.
i checked virtual memory.
please help me out.
thanks
krish

Hi Krish,
Welcome to SDN.
The installation log files would help figure out the exact error.
In the below case, the log file SAPAPPL2_2.LOG might give more information. Let us if the logs have any errors mentioned.
Logs should be in the <OS drive>\Program Files\sapinst_instdir\.... folfer.
Regards,
Srikishan

Error in ECC6 During installation

Dear all
Error in ECC6 During installation , the following contents is get from sapnst_dev.log
148556: if ( componentToBeCalled == 'NW_Usage_Types_Configuration_BI_ind_ind_ind_ind')
148557:
148560: if ( componentToBeCalled == 'NW_Call_Offline_CTC_ind_ind_ind_ind')
148561:
148564: }
ERROR 2008-06-27 07:43:37 [iaxxejsbas.cpp:178]
 EJS_ErrorReporter
FJS-00003 TypeError: spStringRE.exec(labelString) has no properties (in script NW_Onehost|ind|ind|ind|ind, line 63483: ???)
ERROR 2008-06-27 07:43:37
FCO-00011 The step validateContent with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|4|0|SAP_Software_Features_GetContent|ind|ind|ind|ind|0|0|validateContent was executed with status ERROR .
TRACE
<html><head></head><body>An error occurred while processing service SAP ERP 2005 Support Release 2 > SAP Systems > Oracle > Central System > Central System Installation. You may now<ul> <li>press Retry to repeat the current step.</li> <li>press the View Log button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul>Log files are written to C:\Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS.</body></html>
TRACE [iaxxgenimp.cpp:1155]
 showDialog()
waiting for an answer from gui
INFO 2008-06-27 07:45:05 [iaxxgenimp.cpp:782]
 showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|4|0|SAP_Software_Features_GetContent|ind|ind|ind|ind|0|0|validateContent".

Up !?

Error in NW2004S / EP7 installation (AIX & Oracle)

Similar Messages

Maybe you are looking for