Error in OBN configuration Transport in SAP HR Portal
Dear All
We have configured flexible performance management in SAP ECC 6.04 with new webdynpro interface.The issue is that OBN settings which are required to be done are not getting transported from dev to quality.Also i do not see any way to copy the original object and replace it with object from dev portal.
Pls suggest
regards
<< Do not post the same question across a number of forums >>
Similar Messages
-
Hello.
Recently, I Add a New Server Node on Java Central Instance.
And Java Program Upload on Portal, then following error occured.
Error in the listener class com.sap.ip.portal.admin.portalanywhere.QueryHandler during the process of
handleTopic
Original server node can upload successfully.
But, An error happens in New Additional node.
Please tell me way to resolve the error.
Regards.
Edited by: Masashi Fujita on Dec 24, 2008 5:29 AM
Edited by: Masashi Fujita on Dec 25, 2008 7:20 AMHi Masashi Fujita,
Check this Link for Uploading and Downloading files using Web Dynpro Java.
[Uploading and Downloading Files in Web Dynpro Java|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00062266-3aa9-2910-d485-f1088c3a4d71]
[Upload Files Using Web Service in Web Dynpro Java Application|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0d9336b-b4cf-2910-bdbf-b00d89bd2929]
[Uploading and Downloading Files in Web Dynpro Tables|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0e10426-77ca-2910-7eb5-d7d8982cb83f]
Thanks & Regards,
Sharma Kvbk. -
OBN configuration not transported to QA
I am using standard iViews which have OBN configuration. OBN configuration was missing so i had to add it manually as per an SAP note.
teh issue I am having is that, after transporting the iViews to QA, my OBN configuration is not available in QA.
how can I transport my OBN configuration? is there is specific transport setting for OBN?
We are using SAP Portal 7 EnhP1 with ECC 6 EnhP4.
regards,
Tiberiu
Edited by: Tiberiu Sasu on Mar 28, 2011 4:39 PMHello Tiberiu,
For the missing OBN -> did you add iViews under Navigation Node in the Role where it was missing.
If the added iViews were part of the standard collection - no need to transport iViews. If not add the custom iViews and modified Role to the content transport. This should solve the issue.
Cheers Dhanz -
Error in the configuration for sap logon tickets
Hi Forum,
I use Tcode crmd_order_bp to see the BP cockpit and the error message displays as
<b>Error in the configuration for SAP logon tickets</b>
But if I click "Yes", system displays cockpit.
How can I avoid this error.
Thanks in advance
Regards
ShridharYou will still need to configure SSO (either by logon ticket or username/password). The data source access is done using the username/password configured in the UM Config dialog box.
I can see where you're coming from with your thinking, however logon-ticket-based SSO is probably the best approach.
Cheers,
Darren. -
Error Destination in JMS Transport Configuration page (Proxy Services)
Hi, Can anybody provides me the sample of Error Destination in JMS Transport Configuration page (Proxy Services) .I need to know the format. I am using "jms://<host:port[,host:port]*/factoryJndiName/destJndiName>", but it does not work.
From Oracle webstie, http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/interopjms/transport.html, the detail description of Error Destination is " In this field you can configure the name of the target destination for the messages, which have reached the maximum number of retry count. "Can you provide the JNDI name of the error destination alone there ?
-
Error: Test call of transport control program (tp) ended with return code 0
Hi Experts,
When we are trying to transport Request.
Error: Test call of transport control program (tp) ended with return code 0208
in STMS what are the steps to fallow to just back up the code.
Any Solutions is Greatly Appreciable...
Thanks in Advance,
Ram,Hi,
a)If your system is UNIX check /usr/sap/trans is mounted or not?
b)After configuring TMS did you save and activate?that can be one reason.
c)tp might be corrupted.u need to upgrade your tp. (or you can upgrade to the latest kernel)
Please check the below link
could not start transport control program tp
However as suggested by NIbu, you should restart the server once before doing any other checks
Thanks
Debdeep
Edited by: Debdeep Ray on Jul 13, 2009 4:28 PM -
ABAP Trial Version SP12:Error while setting up transport environment
Hi Folks,
I have successfully installed ABAP trial SP12 on my notebook(XP) and have been able to create some objects.
Thanks to very effective blogs by Manfred Lutz .
Now, I'm trying to set up the transport environment as per the blog but face the following error when I execute the step 'Distribute and Activate TMS Configuration'
Appreciate any help in solving the issue. I'm detailing below the error and the checks I had done.
******ERROR*************************************************************
ERROR:
Could not start transport control program tp
LONG TEXT:
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
I did the following based on the long text and after searching the forum:
*(1)*
Run program RSTPTEST to localize error.
The program gave the following result for the RFC destination 'CALLTP_WindowsNT':
********RESULT OF RSTPTEST***********************************************
"timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'#Timeout during connection setup (check that partner exists)"
*(2)*
Run the connection test in SM59 for destination 'CALLTP_WindowsNT':
The results were inconsistent. The connection test failed often but it was ok a few times.
The details of the connection failure are as follows:
*******CONNECTION FAILURE RESULTS******************************************************
Cancel
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' Timeout during connection setu
ERROR: timeout during allocate
LOCATION: SAP-Gateway on host JayNB / sapgw00
DETAIL: no connect of TP D:\SAP\NSP\SYS\exe\run\tp.EXE from host JayNB after 2
COMPONENT: SAP-Gateway
COUNTER: 22
MODULE: gwr3cpic.c
LINE: 5873
RETURN CODE: 242
SUBRC: 0
RELEASE: 700
TIME: Sun Mar 23 11:07:53 2008
VERSION: 2
*(3) I then went to STMS and regenerated the RFC destinations and then ran the connection test. The result was OK.
Now, I again execute the 'Distribute and Activate TMS Configuration' step . It still gives the same error.
When I run the connection test in SM59, it results in error.
Further checks:***********************
(a) The permissions for folder SAP in the local directory were done as instructed in the blog.
(b) the directory path /SAP/trans/bin had the following files:
*TP_DOMAIN_NSP.PFL* : the last modified date changes every time I execute 'Distribute and Activate TMS Configuration'.
*DOMAIN* :The last modified date is in the past. It does not change.
Please inform how do I set up transport.
Jay
Code Formatted by: Alvaro Tejada Galindo on Apr 1, 2008 4:43 PMHi Krishna ,
Thank you for the suggestion.
I did as you suggested by inserting the mapping of ip and host in the hosts file.
and restarted the server,but I still get the same error "could not start transport control program tp".
Any other step that I'm missing.
Thanks again
Jay -
Hi All,
i am getting an error in JDI configuration in the step importing MSS.sca file in CMS transport studio/development.
error description as follows
Fatal:the compartment sap.com_SAP_MSS_1 contains dirty DCs after the CBS build process:
Info:dirty DC in compartment sap.com_SAP_MSS_1 (dcname=mss/ecm dcvendor=sap.com)
Info:dirty DC in compartment sap.com_SAP_MSS_1 (dcname=mss/rec dcvendor=sap.com)
Info:the compartment sap.com_SAP_MSS_1 contains broken DCs after the CBS build process:
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/budget dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/equ dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/ewa dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/finutils dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/lpa dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/mas dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/mol dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/mov dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/pcr dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/per dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/pla dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/qtp dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/qtt dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/rec/cand dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/rec/req dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/rpt dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=mss/tmv dcvendor=sap.com)
Info:broken DC in compartment sap.com_SAP_MSS_1 (dcname=temp/testforisrlpd dcvendor=sap.com)
Fatal:communication error: CBS error: dirty DCs in buildspace after the CBS build process
Info:Step CBS-make ended with result 'fatal error' ,stopping execution at 2007-02-26 04:52:23.0586 +1:00
please help me.
thanks in advance.
Srinivas.Hi ...
Maintain one more characterictic like Zprice and in Addl data give table as SDCOM and field as VKOND and no values, this is characteristics for variant price and include it in the class which u have created earlier.
goto CT04 and goto values .... there select one value eg RED and then goto object dependency and give code as
$self.Zprice = 'A1'
and for all values give it like that..
Now goto VK11 and give VA00 .....
then enter varaitn as A1 and give price
give A2 and give price
like all variants 'A1' etc etc etc which u maintained in object dependency ....
now u can create profile in Cu41 and then run sales order
so what ever u select ...red, blue green etc in order for eg color characterictics .. u have maintained for each value in characteristics .. object dependency .... as $self.Zprice = 'A1', so A1 price maintained in VK11 so if u select Red ... then price from A1 comes ..
same procedure u follow for all values in other characterictics .. with only one characteristics Zprice ... i.e $self.Zprice = 'B1' etc .. and maintain values for B1 etc in Vk11 in Va00.
Reward if useful
Krishna -
Configuring transport for calendar
Hello together!
I have problems with my calender in portal. Error message occurred: "No transport has been configured for calendar".
Can anybody give me a hint to solve the problem?
I am looking forward for your comments!
Thanks a lot!
DominikHi,
Check the SAP notes here:
[805483|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_ep_km/~form/handler]
https://forums.sdn.sap.com/thread.jspa?threadID=72396
Regards,
Praveen Gudapati -
Error: ORA-16778: redo transport error for one or more databases
Hi all
I have 2 database servers"Primary database and physical standby" in test environment( before going to Production)
Before Dataguard broker configuration , DG setup was running fine , redo was being applied and archived on phy standby.
but while enabling configuration i got "Warning: ORA-16607: one or more databases have failed" listener.ora & tnsnames.ora are updated with global_name_DGMGRL
Please help me how can i resolve this issue .Thanks in advance.
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys
Password:
Connected.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database
show database
^
Syntax error before or at "end-of-line"
DGMGRL> remove configuration
Warning: ORA-16620: one or more databases could not be contacted for a delete operation
Removed configuration
DGMGRL> exit
[oracle@PRIM ~]$ connect sys/sys@prim as sysdba
bash: connect: command not found
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 08-OCT-2006 19:52:48
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PRIM_DGMGRLL" has 1 instance(s).
Instance "PRIM", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:46
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:59
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect /
Connected.
DGMGRL> create configuration test as
primary database is PRIM
connect identifier is PRIM
;Configuration "test" created with primary database "prim"
DGMGRL> add database STAN as
connect identifier is STAN
maintained as physical;Database "stan" added
DGMGRL> show configuration
Configuration
Name: test
Enabled: NO
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
DISABLED
DGMGRL> enable configuration
Enabled.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database verbose prim
Database
Name: prim
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
PRIM
Properties:
InitialConnectIdentifier = 'prim'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
LogFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'PRIM'
SidName = 'PRIM'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/PRIM/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "prim":
Error: ORA-16778: redo transport error for one or more databases
DGMGRL> show database verbose stan
Database
Name: stan
Role: PHYSICAL STANDBY
Enabled: YES
Intended State: ONLINE
Instance(s):
STAN
Properties:
InitialConnectIdentifier = 'stan'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
LogFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'STAND'
SidName = 'STAN'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=STAND)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/STAN/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
DGMGRL>This:
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
says that your network setup is not correct. You need to resolve that first.
As for Broker setup steps how about the doc or our Data Guard 11g Handbook?
It's 3 DGMGRL commands so I am not sure what 'steps' you need?
Larry -
E-Commerce Catalog error and log configurator probelm?
Hello,
I am trying to browse a B2B shop (http://server:port/b2b/b2b/init.do) in CRM 5.0 and getting following error message:
The catalog that you have selected is currently unavailable; try again later
I am using CRM 5.0 System (IDES Client) and basically trying to setup a E-Commerce development environment.
Following are the steps i have done so far for E-Commerce configuration:
1. Configured ISADMIN (http://server:port/isauseradm/admin/xcm/init.do).
1.1 Changed following params for Start->General Application Settings->Customer->isauseradm->isauseradmconfig:
>> SSLEnabled: false
>> appinfo: true
>> show start.jsp: true
>> AddUserToPartner: true
>> AcceptExistingUser: true
1.2 Created a new JCo connection under Start->Components->Customer->jco and entered my back end CRM System details and saved it as CRM_800_JCO. I also did Run Test which was successful.
1.3 Created a new JCo connection under Start->Application Configurations->Customer and entered following params and saved it with name CRM_800_ISAUSERADMSTD:
>> Base configuration: isauseradmStandard
>> default configuration: X
>> active configuration: X
>> jcodata: CRM_800_JCO
>> backendtype: crmdefault
>> usertype: CRM_Standalone
>> uidata: default
2. Configured B2B (http://server:port/b2b/admin/xcm/init.do).
2.1 Changed following params for Start->General Application Settings->Customer->b2b->b2bconfig:
>> SSLEnabled: false
>> appinfo: true
>> show start.jsp: true
2.2 Created a new JCo connection under Start->Components->Customer->jco and entered my backend CRM System details and saved it as CRM_800_JCO. I also did Run Test which was successful.
2.3 Created a new JCo connection under Start->Application Configurations->Customer and entered following params and saved it with name CRM_800_B2BCRMSTD:
>> Base configuration: b2bcrmstandard
>> default configuration: X
>> active configuration: X
>> jcodata: CRM_800_JCO
>> usertype: CRM_Standalone
3. I was really not sure if ShopAdmin config is required or not but i did it. Configured SHOPADMIN (http://server:port/shopadmin/admin/xcm/init.do).
3.1 Changed following params for Start->General Application Settings->Customer->shopadmin->shopadminconfig:
>> SSLEnabled: false
>> appinfo: true
>> show start.jsp: true
3.2 Created a new JCo connection under Start->Components->Customer->jco and entered my backend CRM System details and saved it as CRM_800_JCO. I also did Run Test which was successful.
3.3 Created a new JCo connection under Start->Application Configurations->Customer and entered following params and saved it with name CRM_800_CRMSHOP:
>> Base configuration: crmshop
>> default configuration: X
>> active configuration: X
>> jcodata: CRM_800_JCO
4. Restarted CRM J2EE.
5. Setup TREX 7.0.
5.1 From TREX Administration, created a new connection (Type A, i.e., using System Number and Application Server Host) for CRM System and also RFC Dest. (sm59) in CRM System.
5.2 Restarted TREX and connected this connection.
5.3 Following are the visible column values for this connection in TREX Administration:
>> Connection Status: <connected>
>> Configuration Satus: Green
>> SAP System: CRM
>> RFC Destination: TREX_DEFAULT
>> Gateway: local
>> RfcServer Instances: 1 (no automatic changes)
>> TREXRfcServer Processes: 1
>> Workprocesses: 6 (4 DIA, 2BGD)
5.4 Did a RFC Connection test in CRM System using SM59 which was successful as well.
5.5 Using Transaction SRMO (Retrieval : Search Server Relation Monitor) in CRM System changed the RFC Destination for Search server ID DRFUZZY (for both I and S type RFC Server destination action) to TREX_DEFAULT. Did a connection test for this and it was successful.
6. Initiated Replication using transaction COMM_PCAT_IMS_INIT with following params:
>> Product Catalog: PCSHOP
>> Variant: VAR_EN
>> Search Server Relation: DRFUZZY
>> Publishing Computer ID:
>> Allows Parallel Processing:
>> Publish Documents via HTTP:
>> Transfer Document Content: X
>> Package Size of Indexing: 5,000
>> Processing Existing Indexes: Overwrite Index Only When OK
>> Behavior when Error Messages Occur: Cancel Variant Replication
7. Logged into ISADMIN User Config (http://server:port/isauseradm/useradmin/init.do) and created a new user using the option New User and New Contact Person with an existing company of type Sold-To Party and which belongs to the sales area that is linked with PCSHOP Product Catalog (from IDES data).
Now, when i log into B2B Page (http://server:port/b2b/b2b/init.do) using the newly created user and click on the shop PC4BIZ_EN i get following error message:
The catalog that you have selected is currently unavailable; try again later
I also created a new Product Catalog and did the Initial Replication still getting the same above error message.
Can anyone please tell me what am i missing or what mistake i have done?
I even restarted CRM System, but the result is still the same.
Also, how do i check the log files for B2B? I checked the E-Commerce Admin Console (http://server:port/b2b/admin/index.jsp) and clicked on the logging link, but i get the following message:
Logging is now configured centrally in the J2EE Engine Visual Administrator (server service: Log Configurator)
How exactly do i configure and what is the right path for B2B Logging in J2EE Visual Administrator? And where will the log files for B2B be stored on the server?
I would really appreciate (and of course award points) for your help on this.
thanks and regards,
VasuThanks for the Note reference. I will go through it now and try to check the log files.
And regarding the error message i don't think it could be because of The Catalog variant is not set right in the Shopadmin application as all the values in Shopadmin seem to be correct. Anyhow following are the current values selected for the custom Product Catalog I created:
Shop Id: ZTEST
General Information
--> Usage
> Business Scenario: Internet Sales B2B
--> Authorizations
> Authorization Group: <blank>
--> User Administration
> Partner Function Contact Person: 00000015
> Country Group: <blank>
--> Billing Documents
> Display of Billing Documents: No Billing Documents
--> Store Locator
> Display Store Locator: <blank>
Catalog
--> Product Catalog
> Catalog Search: <blank>
> Catalog: ZTEST
> Catalog Variant: VAR_EN
> Catalog View: <blank>
> Hide Internal Catalog: <blank>
> Controlling Price Determination in the Catalog: via IPC
> Profile group for pricing related attributes for exchange products: <blank>
Transactions
--> General
> Allow transaction management for other business partners in hierarchy: <blank>
> Large Documents: Display All Items
> Document type can be chosen late: <blank>
> Batch Processing Permitted: <blank>
> Display product determination information: X
--> Order
> Choose Order Types: Order Type
> Order Type: ISBB
--> Order Template
> Order Templates Allowed: X
> Order Type: ISBB
--> +Quotations
> Creating a Quotation: No Quotation
--> Contracts
> Contract Determination: <blank>
--> Contract Negotiations
> Allow Contract Negotiations: <blank>
Marketing
--> Global Product Recommendation
> Display Global Product Recommendation: <blank>
--> Personalized Product Recommendation
> Display Personalized Product Recommendation: <blank>
--> +Product-Related Proposals +
> Display Product-Related Proposals: <blank>
--> +Campaigns +
> Allow manual entry of campaigns: <blank>
Auction
--> Auction
> Auctions allowed: <blank>
Regarding the reason "The Catalog was not replicated properly and is hence unavailable on TREX", is there any way to verify this? When i ran Initial Replication (transaction COMM_PCAT_IMS_INIT with the values i said in my first post) everything was green.
Also, how do i clear the Catalog Cache? Is it the same as clearing the Catalog Cache Statistics in E-Commerce Administration Console (http://server:port/b2b/admin/index.jsp)?
Thanks and Regards, -
FJS-00012 ERROR while executing script in start SAP system
Hi experts,
I am getting error in the Oracle preload actions while installing the SAP 4.7 using the ORacle 9.2.0.1..
FJS-00012 Error when executing script in start SAP system(post processing)
My comp configuration is as follows:
160 gb hard disk
RAM 1GB
OS: win 2003 server enterprise edition
oracle 8.1.7
During the Database Load (post processing) section of the
installation, i get an error and the installation fails.
I am giving all the logs here including the trace log and the
Sapview.log file ans sapinst.
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: START OF LOG: 20070511002459
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#5 $ SAP
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\ESA\SYS\exe\run/R3load.exe -ctf I E:\db3\EXPORT3/DATA/SAPVIEW.STR C:\SAPinst ORACLE KERNEL/DDLORA.TPL C:\SAPinst ORACLE KERNEL/SAPVIEW.TSK ORA -l C:\SAPinst ORACLE KERNEL/SAPVIEW.log -o D
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: job completed
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: END OF LOG: 20070511002500
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: START OF LOG: 20070511070423
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#5 $ SAP
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\ESA\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst ORACLE KERNEL/SAPVIEW.cmd -l C:\SAPinst ORACLE KERNEL/SAPVIEW.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=D:\oracle\ora81 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPESA's password
DbSl Trace: Connecting as /@ESA on connection 0 ...
DbSl Trace: Attaching to DB Server ESA (con_hdl=0,svchp=002BD418,svrhp=002BD224)
DbSl Trace: Starting user session (con_hdl=0,svchp=002BD418,srvhp=002BD224,usrhp=00304E94)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=002BD418,usrhp=00304E94)
DbSl Trace: Now I'm disconnected from ORACLE
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPESA/<pwd>@ESA on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=002BD418,srvhp=002BD224,usrhp=00304E94)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Database instance esa is running on MALTI with ORACLE version 8.1.7.4.1 since 20070511
(DB) INFO: connected to DB
(DB) INFO: /SAPTRX/A_CONDF4 created
(DB) INFO: /SAPTRX/VDASFEV created
(DB) INFO: /SAPTRX/VDASFPAR created
(DB) INFO: /SAPTRX/VD_AOMIL created
(DB) INFO: /SAPTRX/VD_AOPAC created
(DB) INFO: /SAPTRX/VD_AOPAE created
(DB) INFO: /SAPTRX/VD_AOPAI created
(DB) INFO: /SAPTRX/VD_AOPAR created
(DB) INFO: /SAPTRX/VD_AOTD1 created
(DB) INFO: /SAPTRX/VD_AOTD2 created
(DB) INFO: /SAPTRX/VD_AOTDD created
(DB) INFO: /SAPTRX/VD_AOTYP created
(DB) INFO: /SAPTRX/VD_ASPAR created
(DB) INFO: /SAPTRX/VD_CONDL created
(DB) INFO: /SAPTRX/V_AODD02 created
(DB) INFO: /SAPTRX/V_DD03 created
(DB) INFO: /SAPTRX/V_DD03X created
(DB) INFO: /SDF/SMODICOMP created
(DB) INFO: /SDF/SMODIDEVC created
(DB) INFO: /SDF/UMOD_COMP created
(DB) INFO: ACEPSOIT_UPD created
(DB) INFO: ADJV_TRANS_DIF created
(DB) INFO: AFFWV0 created
(DB) INFO: AFKO_LAUFN created
(DB) INFO: AFSPLIT created
(DB) INFO: AFVCP created
(DB) INFO: ALM_ME_T003O_IS created
(DB) INFO: ALM_ME_T350I created
(DB) INFO: ALM_ME_TQ80_T created
(DB) INFO: ANEKPV created
(DB) INFO: APOUPD created
(DB) INFO: APPL_DEVC created
(DB) INFO: APPL_DIAL created
(DB) INFO: APPL_DOMA created
(DB) INFO: APPL_DTEL created
(DB) INFO: APPL_ENQU created
(DB) INFO: APPL_FUGR created
(DB) INFO: APPL_FUGRG created
(DB) INFO: APPL_FUNC created
(DB) INFO: APPL_INDX created
(DB) INFO: APPL_MCOB created
(DB) INFO: APPL_MENU created
(DB) ERROR: DDL statement failed
(CREATE VIEW "APPL_MODS" ( "NAME" , "TYP" , "MEMBER" , "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X')
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=002BD418,usrhp=00304E94)
DbSl Trace: Detaching from DB Server (con_hdl=0,svchp=002BD418,srvhp=002BD224)
DbSl Trace: Now I'm disconnected from ORACLE
(DB) INFO: disconnected from DB
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: END OF LOG: 20070511070433
SAPINST
INFO 2007-05-10 23:59:05
Processing of host operation t_HostInfo_SHARED succeeded.
INFO 2007-05-10 23:59:16
The 'saploc' share exists at directory 'D:\usr\sap'. Choosing drive D: as SAP System drive.
INFO 2007-05-10 23:59:21
Copying file E:/KERNEL/NT/COMMON/OraVolatileDatabaseParameters.xml to: OraVolatileDatabaseParameters.xml.
INFO 2007-05-10 23:59:21
Creating file C:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.xml.
INFO 2007-05-11 00:01:52
Copying file E:/db1/EXPORT1/DB/ORA/DBSIZE.XML to: DBSIZE.XML.
INFO 2007-05-11 00:01:52
Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.XML.
INFO 2007-05-11 00:01:52
Copying file system node E:\db1\EXPORT1/DB/ORA/DBSIZE.XML with type NODE to DBSIZE.XML succeeded.
INFO 2007-05-11 00:01:52
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2007-05-11 00:01:52
Copying file E:/db1/EXPORT1/DB/DDLORA.TPL to: DDLORA.TPL.
INFO 2007-05-11 00:01:52
Creating file C:\SAPinst ORACLE KERNEL\DDLORA.TPL.
INFO 2007-05-11 00:01:52
Copying file system node E:\db1\EXPORT1/DB/DDLORA.TPL with type NODE to DDLORA.TPL succeeded.
INFO 2007-05-11 00:01:52
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2007-05-11 00:01:57
Moving file C:/SAPinst ORACLE KERNEL/DDLORA.TPL to: orig_ddl_ora_tmp.tpl.
INFO 2007-05-11 00:01:57
Moving file C:/SAPinst ORACLE KERNEL/changed_ddl_ora_tmp.tpl to: DDLORA.TPL.
INFO 2007-05-11 00:01:57
Removing file C:/SAPinst ORACLE KERNEL/orig_ddl_ora_tmp.tpl.
INFO 2007-05-11 00:03:00
Package table created
PHASE 2007-05-11 00:04:15
SAP R/3 Enterprise 4.70 for Oracle
PHASE 2007-05-11 00:04:15
SAP Web Application Server
PHASE 2007-05-11 00:04:15
Request common parameters of SAP System
PHASE 2007-05-11 00:04:15
Create operating system accounts
INFO 2007-05-11 00:04:15
Copying file C:/SAPinst ORACLE KERNEL/keydb.xml to: C:/SAPinst ORACLE KERNEL/keydb.1.xml.
INFO 2007-05-11 00:04:15
Creating file C:\SAPinst ORACLE KERNEL\keydb.1.xml.
INFO 2007-05-11 00:04:15
Copying file C:/SAPinst ORACLE KERNEL/OraVolatileDatabaseParameters.xml to: C:/SAPinst ORACLE KERNEL/OraVolatileDatabaseParameters.1.xml.
INFO 2007-05-11 00:04:15
Creating file C:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.1.xml.
INFO 2007-05-11 00:04:15
Copying file C:/SAPinst ORACLE KERNEL/DBSIZE.XML to: C:/SAPinst ORACLE KERNEL/DBSIZE.1.XML.
INFO 2007-05-11 00:04:15
Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.1.XML.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1004 ACCOUNTNAME=malti\SAP_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1005 ACCOUNTNAME=malti\SAP_ESA_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1006 ACCOUNTNAME=malti\SAP_ESA_GlobalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Global Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1007 ACCOUNTNAME=ORA_ESA_DBA ACCOUNTTYPE=GROUP CONDITION=YES DESCRIPTION=Database Operator Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1008 ACCOUNTNAME=ORA_ESA_OPER ACCOUNTTYPE=GROUP CONDITION=YES DESCRIPTION=Database Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Processing of all account operations of table t_SAPComponent_Accounts_Accounts_SHARED succeeded (operation CREATE).
INFO 2007-05-11 00:04:18
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1009 ACCOUNTNAME=malti\esaadm ACCOUNTTYPE=USER DESCRIPTION=SAP System Administrator MEMBERSHIP=malti\SAP_ESA_GlobalAdmin,malti\Users,Administrators,ORA_ESA_DBA,ORA_ESA_OPER,malti\SAP_LocalAdmin,malti\SAP_ESA_LocalAdmin MEMBERSHIPSEPARATOR=, OPMODE=CREATE USERPASSWORD=*... succeeded.
INFO 2007-05-11 00:04:18
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1010 ACCOUNTNAME=malti\SAPServiceESA ACCOUNTTYPE=USER CONDITION=YES DESCRIPTION=SAP System Service Administrator MEMBERSHIP=malti\SAP_ESA_GlobalAdmin,Administrators,ORA_ESA_DBA,ORA_ESA_OPER,malti\SAP_LocalAdmin,malti\SAP_ESA_LocalAdmin MEMBERSHIPSEPARATOR=, OPMODE=CREATE USERPASSWORD=*... succeeded.
INFO 2007-05-11 00:04:18
Processing of all account operations of table t_SAPComponent_Accounts_Accounts_SHARED succeeded (operation CREATE).
PHASE 2007-05-11 00:04:18
Request operating system user information
PHASE 2007-05-11 00:04:18
Request operating system user information
PHASE 2007-05-11 00:04:18
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
INFO 2007-05-11 00:04:20
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1488183395-3813774055-1856681103-500' on host 'malti'!
INFO 2007-05-11 00:04:20
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1488183395-3813774055-1856681103-500' on host 'malti'!
INFO 2007-05-11 00:04:20
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1488183395-3813774055-1856681103-500' on host 'malti'!
INFO 2007-05-11 00:04:20
Evaluating all 'tNT_RegistryEntries' table rows succeeded.
INFO 2007-05-11 00:04:21
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-05-11 00:04:22
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esa_16 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata1\esa620_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata1\esa620_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata2\esa620_2.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata2\esa620_2 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata3\esa620_3.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata3\esa620_3 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata4\esa620_4.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata4\esa620_4 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata4\esa620_5.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata4\esa620_5 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata5\esa620_6.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata5\esa620_6 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata5\esa620_7.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata5\esa620_7 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata6\esa620_8.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esa620_8 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata6\esa620_9.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esa620_9 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata6\esausr_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esausr_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata2\roll_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata2\roll_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata3\temp_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata3\temp_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata1\system_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata1\system_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-05-11 00:05:40
Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
INFO 2007-05-11 00:05:40
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-05-11 00:05:41
Creating file D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:05:42
Creating file D:\oracle\ora81\database\initESA.sap.
INFO 2007-05-11 00:05:43
Copying file E:/KERNEL/NT/COMMON/INSTALL/INITSID.DBA to: D:\oracle\ora81/database/initESA.dba.
INFO 2007-05-11 00:05:43
Creating file D:\oracle\ora81\database\initESA.dba.
INFO 2007-05-11 00:05:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:05:45
Moving file D:/oracle/ora81/database/initESA.ora to: orig_init_ora_tmp.txt.
INFO 2007-05-11 00:05:45
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:05:45
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-05-11 00:05:46
Creating file C:\SAPinst ORACLE KERNEL\oradim.log.
INFO 2007-05-11 00:05:51
See 'D:\oracle\ora81/bin/oradim -new -sid ESA -STARTMODE auto' output in 'C:\SAPinst ORACLE KERNEL\oradim.log'.
INFO 2007-05-11 00:05:51
'D:\oracle\ora81/bin/oradim -new -sid ESA -STARTMODE auto' returned with '0'.
INFO 2007-05-11 00:05:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:05:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:51
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:54
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:21
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:31
Moving file D:/oracle/ora81/database/initESA.ora to: orig_init_ora_tmp.txt.
INFO 2007-05-11 00:07:31
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:07:31
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-05-11 00:07:32
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:34
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:09:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:09:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:04
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:42
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:11:20
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:11:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:11:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:12:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:12:35
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:12:37
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:13
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:15
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:51
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:53
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:14:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:14:31
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:11
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:16:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:16:28
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:04
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:45
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:18:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:18:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:03
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:39
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:42
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:20:21
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:20:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:45
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:22:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:22:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:08
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:47
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:54
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:56
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:15
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:41
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:46
Moving file D:/oracle/ora81/database/initESA.ora to: orig_init_ora_tmp.txt.
INFO 2007-05-11 00:24:46
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:24:46
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-05-11 00:24:46
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-05-11 00:24:47
See 'D:\oracle\ora81/bin/lsnrctl stat' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-05-11 00:24:47
'D:\oracle\ora81/bin/lsnrctl stat' returned with '3'.
INFO 2007-05-11 00:24:47
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-05-11 00:24:48
See 'D:\oracle\ora81/bin/lsnrctl start' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-05-11 00:24:48
'D:\oracle\ora81/bin/lsnrctl start' returned with '0'.
INFO 2007-05-11 00:24:49
Copying file E:/KERNEL/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
INFO 2007-05-11 00:24:49
Creating file C:\SAPinst ORACLE KERNEL\oradbusr.sql.
INFO 2007-05-11 00:24:49
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
PHASE 2007-05-11 00:24:54
Database Load
INFO 2007-05-11 00:24:56
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:00
Task files created
INFO 2007-05-11 00:25:00
Command files created
INFO 2007-05-11 00:25:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2007-05-11 02:18:03
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPAPPL1.log
INFO 2007-05-11 02:18:03
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2007-05-11 02:44:07
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSEX2.log
INFO 2007-05-11 02:44:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 03:55:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:25:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:42:08
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:47:08
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:55:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:57:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:59:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:01:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:03:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:04:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:05:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 07:04:33
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2007-05-11 07:04:33
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPVIEW.log
ERROR 2007-05-11 07:04:33
FJS-00012 Error when executing script.
THANKS ALLL IN ADVANCE,
Regards,
Maltino space left on devices...
==> "<b>MOS-01109 Needed space on mountpoint F:/ is 5.248e07 KB, but got only 4.26433e07 KB.</b>"
and others...
-> provide more space and restart
GreetZ, AH -
Portal Runtime Error while performing User Mapping to SAP SRM
Please find below the error I received while User Mapping from Enterprise Portal to SAP SRM :
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 04:21_23/06/05_0073_8097650
See the details for the exception ID in the log fileHi,
yes, Karsten is correct. Just some background:
"User Mapping not fully available.." finally means that user mapping is configured to use strong encryption, but the main crypto key for user mapping is missing. Usually, that's because "SAP Java Cryptographic Toolkit" and/or "JCE policy files for unlimited strength encryption" are not installed (or the server hasn't be restarted afterwards). The note will most likely help
Best regards
Heiko -
Error when releasing a transport
Hello experts,
I am getting an error when releasing a transport. The error message is telling me that
Object DTPA DTP_009C8T81IIB6H4UFC7FQUVRFL was set to 'inactive'
The detailed error message isnt very helpful. The performance assistant gives the error message RSO 407.
I found another thread, scn.sap.com/thread/3428031
The answer in this thread appears to be very close to a solution for me, I just need a little more information I think. As it says, I have looked in the table RSTRAN for the transformation that this DTP processes. There are three rows, with a different OBJVERS. A and M are both set to ACT, but OBJVERS = D is set to OBJSTAT = INA.
I suspect that this is the problem with the releasing of my transport. Do you agree?
If so, how do I go about getting this activated?
Many thanks.Hi Simon,
The D version will be always inactive as it indicate SAP Delivered version of the transformation.
I will suggest just have a look at any existing transformation, you will find same status i.e D version INA also check last change it will be SAP also under content column you will find info for D version.
I still say, just go ahead and release your transport by ignoring the message, it should work. You are all set to move your transport.
Rest upto you.
I have tried releasing transport by ignoring messages many times.....and worked all time
Thank-You.
Regards,
VB -
Error in importing Configuration objects of PI 7.0 to PI 7.1
Hi All,
My server is upgraded from PI 7.0 to PI 7.1.
I am getting Error while importing Configuration objects of PI 7.0 to PI 7.1 now.
Pls see the below error
Attempt to access the 1 requested objects on 1 failed. Detailed information: com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object Adapter Metadata Mail | http://sap.com/xi/XI/System, type AdapterMetaData from application REPOSITORY on system REPOSITORY failed. Object does not exist. Detailed informatio n: Software component version with key ID: b38bcd00e47111d7afacde420a1145a5 not found
Pls suggestHi,
It seems that adapter metadata has not been loaded into integration repository and because of that when you are trying to import configuration objects in ID then you are getting the error.
The SAP adapter metadata objects are located under the namespace http://sap.com/xi/XI/System of software component SAP BASIS.
What you can do is, if you have installation dvd's then you can copy from their or you can simply [_DOWNLOAD_|https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20 ] from sap market place (refer this [thread|how to import Adapter metadata;) (you must have S-user id for this) and then after you need to do as mentioned below...
1. First unzip the file (if it is zipped) and then put it in the import directory: \usr\sap\<SID>\SYS\global\xi\repository_server\import\
2. Now login to IR and then from menu TOOLS ---> Import design objects and import it.
3. After that in ID, Environment ---> Clear SLD Data Cache
4. Now you can try to import configuration objects...
Regards,
Sarvesh
Maybe you are looking for
-
Not able to get Image dimensions
I am using this code to get the java.awt.Image object Image inImage = Jimi.getImage(inputStream, Jimi.SYNCHRONOUS); I am using Jimi because I am running my code on jdk 1.3 and cannot use JAI. For some images, when I do inImage.getHeight(null); I get
-
Hello, I am converting a LV5.1.1 llb to LV7.1 that contains serial sub VIs ("Serial Port Read.vi", "Serial Port Write.vi", and "Bytes at Serial Port.vi") that need to be replaced with the newer VISA serial sub VIs ("VISA Read.vi", "VISA Write.vi", an
-
Problem while using:RSDRC_CUBE_DATA_GET
Hi , I am extracting data from a basic infocube using fm :RSDRC_CUBE_DATA_GET . Unfortunately it is extracting the data from F-facttable only, and not extracting compressed data. Following are my selections in the function module. Please advice if
-
Interesting Sort using ORDER BY
I would like to sort by footnote names in our table which should be sorted as below: 2a,2b,2c,3a,3b,3c,8,10,15,18 When I use ORDER BY FOOTNOTE_NAME, Oracle sorts the result like this: 10,15,18,2a,2b,2c,3a,3b,3c,8 which is not what I want. Any ideas.
-
What's the exact use of GNS(Grid Naming Server) ???
Hi, I have doubt that what's the use of GNS ? What's the logic behind GNS ? Can we use DNS in stead of GNS ( I assume that probably we can use DNS in place of GNS as GNS is sub domain of DNS ). The last question : Can we use GPNP without GNS ? Regard