Error in Odata & SFSF Receiver Adapter
hello Experts,
i have configured a end to end scenario between PI(7.3.1)->Success Factors
IN ESR i have created the data structure according to Success factors RestFul webservices.
i have used a SOAP sender channel and a tried with ODATA & SFSF adapter at the receiver side,
i have the following doubts & Errors
1. what do we have to enter in Resource path field in both the adpaters, I have read about the HCI(HANA Cloud Integration), but dont have a clear idea it,
can we use something else in place of it for configuring the RESOURCE PATH field, please through some light on this.
2. the error that i am facing for both the adapters in the channel monitoring is as follows :
Connection to the OData endpoint was not successful.The error is com.sap.aii.adapter.lib.component.odata.exception.OsciException: Request processing not possible, problme in getting edmx file
i am testing the scenario from test tab in RWB in PI
regards,
sushant
Hi,
you can refer the recently released blog
OData Adapter and SFSF Adapter (extensions) for SAP Process Integration
ask your query in the blog.
Hope this solve your question.
reg, avinash M
Similar Messages
-
Error while using Jdbc receiver adapter
Hi,
Iam using a receiver jdbc adapter to update a table in my database.Here iam using 'UPDATE' as my action in the mapping.It is giving the foowing error....
Error while parsing or executing XML-SQL document: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)
Can Please anybody tell me what may be the problem with my scenario...
Thanks & Regards,
Radhika.Hi ,
action type should be attribute . Please go through the following structure for update .
<b>
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_RESPONSE xmlns:ns1="http://com/Test">
<STATEMENT_NAME>
<TABLENAME action="UPDATE">
<TABLE>Utility</TABLE>
<access>
<Updated_On/>
</access>
<key>
<TrnHisID/>
</key>
</TABLENAME>
</STATEMENT_NAME>
</ns1:MT_RESPONSE></b>
query for above we may say as
<b>UPDATE Utility set Updated_On='' where TrnHisID =''</b>
Hope it helps
Regards.,
V.Rangarajan -
Error Calling Stored Procedure Receiver adapter
Hi Guys,
I am trying to send data to a stored procedure SQL server R2 2008 from SAP PI7.11.
Transport Protocol: JDBC2.0
Message Protocol : XMLSQLFORMAT
I am able to read from same database using sender adapter.
Name of SP: InderTest
Paramters in SP : @Carrier Varchar(20), @Location Varchar(20), @Product Varchar(20), @Zone Varchar(20),
@dteStart date, @dteEnd date, @strType Varchar(1), @intRate Float
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_FreightPricing xmlns:ns0="http://na.holcim.com/pi/o2c/pricingmaster">
- <StatementName1>
- <InderTest action="EXECUTE">
<table>InderTest</table>
<Carrier isInput="true" type="VARCHAR">4000004</Carrier>
<Location isInput="true" type="VARCHAR">3600</Location>
<Product isInput="true" type="VARCHAR">3553</Product>
<Zone isInput="true" type="VARCHAR">Zone1</Zone>
<dteStart isInput="true" type="DATE">20110704</dteStart>
<dteEnd isInput="true" type="DATE">20120704</dteEnd>
<strType isInput="true" type="VARCHAR">A</strType>
<intRate isInput="true" type="FLOAT">10.00</intRate>
</InderTest>
</StatementName1>
</ns0:MT_FreightPricing>
Error in JDBC Receiver
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'InderTest' (structure 'StatementName1'): java.lang.IllegalArgumentException
Any clue...
I was reading this help document. They have mentioned 5 configuration step, i have worked on JDBC earlier but never did anything like that.... Any idea ?
http://help.sap.com/saphelp_nw70/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm
Regards
Inder<table> element is optional in the structure. In that case you can try:
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:MT_FreightPricing xmlns:ns0="http://na.holcim.com/pi/o2c/pricingmaster">
<StatementName1>
<InderTest action="EXECUTE">
<Carrier isInput="true" type="VARCHAR">4000004</Carrier>
<Location isInput="true" type="VARCHAR">3600</Location>
<Product isInput="true" type="VARCHAR">3553</Product>
<Zone isInput="true" type="VARCHAR">Zone1</Zone>
<dteStart isInput="true" type="DATE">20110704</dteStart>
<dteEnd isInput="true" type="DATE">20120704</dteEnd>
<strType isInput="true" type="VARCHAR">A</strType>
<intRate isInput="true" type="FLOAT">10.00</intRate>
</InderTest>
</StatementName1>
</ns0:MT_FreightPricing>
Regards
Raj -
JMS receiver Adapter - Weblogic
Hi,
Could you please help us.
We are sending messages from XI to Weblogic server with the help of JMS Adapter. The Queue is available in Weblogic we are able to ping the Weblogic server from XI Server. The port is right one.
Our configuration of JMS receiver Adapter is
JNDI Lookup Name of Queue Connection Factory: javax.jms.QueueConnectionFactory
JNDI Lookup Name of JMS Queue:com.nyc.OmsQueue
Name of JNDi Initial Context Factory: weblogic.jndi.WLInitialContextFactory
JNDI Server Address:http://nyc-d01:7001
JNDI Logon User: (Emty)
JNDI Password: (Emty)
There is no User Name and Password
Could you please help us. this is very urgent.
The Error message as follows
Error during channel initialization; exception trace: javax.naming.CommunicationException [Root exception is java.rmi.UnmarshalException: failed to unmarshal class java.lang.Object; nested exception is:
java.io.OptionalDataException]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:83) ...
Regards
RamidiHi,
>>Error during channel initialization; exception trace: java.lang.ClassCastException
at com.sap.aii.af.service.jms.WorkerJMSSender.init(WorkerJMSSender.java:419)
at com.sap.aii.af.service.jms.WorkerHandlerImpl.run(WorkerHandlerImpl.java:369)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
The error u posted is from Weblogic server side, not from XI side.
The problem is that the channel created in weblogic server is not opened. For this you have specific setting while creating channels and queues in weblogic server.
Contact the concerned weblogic server guys in ur team to help you in this issue.
I faced the same error while configuring JMS receiver adapter.
Ravi. -
Error while updating database using jdbc receiver adapter
Hi All,
I am trying to update a single record using jdbc receiver adapter.
This is my the message that is getting created..
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Data xmlns:ns0="urn:Test">
- <STATEMENT>
- <TABLENAME ACTION="UPDATE_INSERT">
<TABLE>ORDERS</TABLE>
- <ACCESS>
<OrderID>99999</OrderID>
<CustomerID>VICTE</CustomerID>
<EmployeeID>3</EmployeeID>
<ShipAddress>VICTE</ShipAddress>
</ACCESS>
- <KEY>
<OrderID compareOperation="EQ">99999</OrderID>
<ShipAddress compareOperation="EQ">VICTE</ShipAddress>
</KEY>
</TABLENAME>
</STATEMENT>
</ns0:Data>
But in Adapter Monitoring i am getting the following error..
<i>Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ORDERS' (structure 'STATEMENT'): java.sql.SQLException: [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near 'VICTE'.</i>
Regards,
RahulRahul,
> In this case i believe the interface has to be synch.
> So what will the response message type be like..
Not necessary. UPDATE can be asynch as well.
Can you turn the trace on like pointed by Michal and then you can see the Query in the Audit Log of the adapter montioring. Try to execute the same query from your DB Client like TOAD and see what is the Syntax error you are getiing.!
The problem looks like some field has some dataype / column name mismatch.
Regards
Bhavesh -
Error in file receiver adapter (Directory does not exist / cannot be create
I have a NFS reiceiver file NFS adapter with target directory:
10.128.68.38\arbo2000\UploadPinfos\arbodev
if I run this line in windows, windows access to this folder.
Full Error log:
Receiver Adapter v2123 for Party '', Service 'BS_0000_ARBO_DEV':
Configured at 2006-04-06 18:08:26 CEST
History:
- 2006-04-06 18:08:35 CEST: Error: Message processing failed: Exception: Message processing failed - configuration error in file receiver adapter (Directory does not exist / cannot be created)
Can somebody help me please??Hi Alvaro,
If your XI server is running on Unix platform then you'll get the access only after mounting 10.128.68.38 this system as a drive. This is equivalent to the windows network mapping.
Next thing is that once that is done then you can access the path /arbo2000/UploadPinfos/arbodev by mentioning it in your directory path.
To check whether the above mentioned is the problem then pls do try by doing it with FTP protocol. If it works then for acting as a local directory for NFS you need to mount the drive.
Cheers
JK -
I'm using Variable substitution for the Directory I determine dynamically using UDF. I'm gettig following error. Would someone clarify how to wrok around this error.
2006-09-28 14:43:38 EDT: Message processing failed: Error during variable substitution: java.text.ParseException: Security violation encountered during variable substitution: Content of variable var2 is not safe: /sales/tempDoss,
for Directory I was using variable substitution.
for example %var2% and then Var1 Iam getting from the Payload ( Iam populating the payload from UDF ).
When I checked 'disable security checks' on the receiver adapter screen, I'm not getting this error anymore.
Message was edited by: Ram Krish -
Wrong port in FTP receiver adapter - no errors in message monitoring?
Hello all
We're on XI 3.0 SP16 and have created / configured a HTTP XML -> XI -> FTP Server scenario. In the receiver comm. channel (ftp) we had specified a wrong port number and always wondered, why we never got errors in message monitoring. Everything seemed to be processed correctly... but no file arrived on the FTP server (receiver) side!
After correcting the wrong FTP port number in the receiver FTP comm. channel everything went fine.
We now encountered a similar problem with a RFC receiver adapter. We're using it in another scenario HTTP XML -> XI -> RFC to SAP R/3 (4.7).
For some reason it died (red status in adapter monitor) and it was no more possible to do RFC calls from XI to SAP R/3 (normal RFC adapter, NO proxies).
In XI message monitor everything seemed to be ok but no message arrived till SAP R/3. Nothing in any queue...
After deactivating and reactivation the RFC receiver comm. channel it worked again BUT ALL PREVIOUSLY SENT messages seem to be lost.
Is it really the way it works? Does XI integration engine at runtime NOT catch whether or not a RFC or FTP receiver adapter died, thus is not able to tell somewhere in message monitor that a message could not be delivered at all?
I'm really confused here but hopefully I simply don't understand some easy principles to take into account...
Our SAP R/3 is on rel. 4.70 with Web AS 6.20. The XI 3.0 plugin is not installed. Do we need to go with server proxies there and use QOS = best effort?!?
Thanks for some suggestions.
Best regards,
RenaudHi Michal
Thanks... works great for normal XML based messages!
Now, what if I wanted to pass binary files from one ftp server via BPM to another ftp server in order to enable the transport acknowledgment?
The files polled from ftp server using the ftp sender adapter are all in binary format (ARJ). No xml data in there. How should the message format look like in BPM for the receiving step? Or: how to make sure not to loose the binary content when passing through BPMs?
I need this sort of scenario because of the tansport acknowledgment and because I need to have some sort of message splitting (send the binary file over to a second ftp server and additionally send some kind of info message to SAP R/3 regarding thin binary file).
BTW: in the MessagingSystem/monitor/monitor.jsp I do not see sender / receiver information. Is this normal? It's quite of a bad thing to look inside each message in order to find out what message I'm having in front of me...
Thanks a lot for your support and patience!
Kind regards,
Renaud -
Soap Receiver Adapter Error. Pls advice urgent
Hi All,
While using Soap Receiver Adapter for synchronous communication
*My Soap Request is:*
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:SendMessage xmlns:ns1="urn:MMWebSrvService">
<strFrom>XI</strFrom>
</ns1:SendMessage>
*My Soap Response from server is:*
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<!-- Inbound Message
-->
<tns:SendMessageResponse xmlns:tns="urn:MMWebSrvService" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<return xsi:type="xsd:int">-1</return>
<strErrorDescription xsi:type="xsd:string">String reference not set to an instance of a String. Parameter name: s</strErrorDescription>
</tns:SendMessageResponse>
How to resolve the error.
RegardsHenry,
Your xml message is not xsd compliant...see if you can generate a xml message using your wsdl with random values, compare that to your imcoming msg..and thats your issue..
Hope that helps
Regards
Ravi Raman
Reward points if helpful ! -
SOAP Receiver adapter error. SOAP CALL Failed
Hi ,
I am implementing scenario R/3->RFC adapter->XI->SOAP REceiver adapter->Web Service (Synchronous). I am getting the error.
SOAP: call failed
SOAP: error occured: java.net.ConnectException: Connection timed out
Message log is as below.
Any clue ?
Thanks & Regards,
Mathew
2005-10-31 18:59:58
Success
output
1130810398454
The message was successfully received by the messaging system. Profile: XI URL: http://host:Port/MessagingSystem/receive/AFW/XI
2005-10-31 18:59:58
Success
output
1130810398458
Using connection AFW. Trying to put the message into the request queue.
2005-10-31 18:59:58
Success
output
1130810398458
Message successfully put into the queue.
2005-10-31 18:59:58
Success
output
1130810398459
The message was successfully retrieved from the request queue.
2005-10-31 18:59:58
Success
output
1130810398459
The message status set to DLNG.
2005-10-31 18:59:58
Success
output
1130810398460
Delivering to channel: CC_CALCULATOR
2005-10-31 18:59:58
Success
output
1130810398564
SOAP: request message entering the adapter
2005-10-31 19:03:07
Success
output
1130810587497
SOAP: call failed
2005-10-31 19:03:07
Error
output
1130810587497
SOAP: error occured: java.net.ConnectException: Connection timed out
2005-10-31 19:03:07
Error
output
1130810587498
Exception caught by adapter framework: Connection timed outHi Mathew,
Check if the webservice is availble??? Based on the error below, it looks like the message is timing out at the Adapter Engine level waiting for the connection to make the webservice call...
Prasad -
No SOAP Envelope error in SOAP Receiver Adapter
Hello Friends,
Informaiton:-
I have configured one Synchronous scenarion for SAP R/3 to PI 7.1 to Java based web applicaiton.
On the Receiver/Outbound side, i have configured the SOAP Receiver Adapter with the Target URL and SOAP Action.
Outbound and Inbound service interfaces have Request/Response and Fault messages.
Issue:-
While sending the Message, Below error is noticed in ABAP stack SXMB_MONI during the Call Adapter Stage and also in RWB (Channel Monitoring) .
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: No SOAP Envelope but 1 {}RESPONSES; HTTP 200 OK
I also found that Request message is not reaching to the Java Web server.
I am taking the Same message Payload (found at Call Adapter Stage) and ussing it in XML Altova SPY Web client tool. There it is running scuccessfully and getting the Response message.
please suggest.
Thanks & Regards
JageshHi,
Yesterday i consumed the same WSDL file in Altova XML SPY and there it is working, getting the Response.
Now comparing the SOAP Request message reaching to the Third party Web server (which fall within the same Lane network)
from SAP PI and Altova XML SPY tool. I used TCP Gateway for the below scenarios.
(1)First i sent the SOAP message from PI and observed the RESPONSE message without the SOAP Envelope in TCP Gatway Trace and hence i am getting the No SOAP Envelope Error in PI.
(2)I consumed the same WSDLfile in Altova XML SPY and sent the SOAP message, here i got the Proper SOAP Response message and hence success in this case. (Used the same Data Payload as used in point 1)
(3)Now to identify the issue in the SOAP Request message being sent from PI, i used the same SOAP message sent in step 1 here, that means copy the entire SOAP ENvelope from the TCP gateway Trace and pasted it in Alota Spy and sent, there it is found running (got the response message from Third Party server).
One difference i found in HTTP Protocol statements in SOAP Request message in Point no 1 and Point no 2 above.
HTTP Protocols in Point 1 (Through PI).
POST HTTP/1.0
Accept: /
Host: 172.24.138.142:4544
User-Agent: SAP-Messaging-com.sap.aii.af.sdk.xi/1.0505
CallingType: SA
content-id: <soap-00306EEAC2051ED1839136CEE8564900 sap.com>
Content-Type: text/xml; charset=utf-8
Content-Length: 1195
SOAPACTION: "Action1"
HTTP Protocols in Point 2 (Through Altova).
POST / HTTP/1.1
Content-Type: text/xml
User-Agent: XML Spy
SOAPAction: "Action1"
Host: 172.24.138.142:4544
Content-Length: 1195
Connection: Keep-Alive
Cache-Control: no-cache
Thanks to Mr. Stefan Grube for writting such a nice blog.
Troubleshooting SOAP, HTTP and Mail Adapter Scenarios with TCPGateway
Experts, please suggest me further.
Thansk & Regards
Jagesh -
Hello,
when trying to send a message using Seeburger AS2 Receiver Adapter I get the following error (strange thing is that it worked before we made some changes, now we changed back and the error occurs):
Description: AS2 Adapter failure MessageId entry with secondaryId <xxxxxxxxxxxxxxxxxxxxxxxx> does not exist! com.seeburger.as2.AS2Plugin.execute
The error message is not meaningful to me. I tried all possible combinations but with no result. What could be the reason for this?Hi,
Is your issue solved? Can you check the connection without using Certificates. Looks like issue with Certificates.
>> When I uncheck the button the flag "SIGN" in the as2 receiver comm channel. The message is sent out to the partner and we get back a negative acknowledgement (also there is an error MIC not verified in comm chan. ). So maybe it is a problem with digital signature? I have checked the receiver agreement, everything there should be fine
Is your scenario is AS2>XI>AS2 and using Certificates to exchange the messages?
please deactivate the use of dynamic attributes in the AS2 receiver channel. The dynamic attributes are set in the sender channel, there-fore the receiver channel overwrites the data given in the commchannel configuration with the data from the sender channel. Therefore, this is an issue specific for AS2 -> XI -> AS2 scenarios. Your partner might use the wrong certificate or not find the certificate because of the wrong payload name that was initially set in the sender channel.
Can you please check the Message Subject and Content Type how it is going using certificates and without using Certificates.?
-Deepthi. -
JDBC Receiver Adapter -- Synch Select. ERROR
Hello,
We have implemented the scenario described by Bhavesh Kantilal in blog 3928:
JDBC Receiver Adapter -- Synchronous Select Step by Step
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
but modified to our requirements.
An Idoc is coming in, mapped to a sync receiver jdbc as described to collect data from a jdbc table.
Result when connecting the oracle database with the jdbc receiver adapter:
Error processing request in sax parser: Error when executing statement for table/stored proc. 'T_ST_MAINDRIVER' (structure 'STATEMENT'): java.sql.SQLException: ORA-00942: table or view does not exist
Oh, like to complete the information by the payload from the jdbc rec. connect:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_JDBC_LOOPUP_ID xmlns:ns0="http://www.xxx.org/excel">
- <STATEMENT>
- <TABLENAME ACTION="SELECT">
<TABLE>T_ST_MAINDRIVER</TABLE>
<ACCESS />
- <KEY>
<MAINDRIVER compareOperation="=">Optomechanical</MAINDRIVER>
</KEY>
</TABLENAME>
</STATEMENT>
</ns0:MT_JDBC_LOOPUP_ID>
The table exists on the database. So, what is our mistake? Do you have any ideas?
Best regards
Dirk
Message was edited by:
Dirk Meinhard
Message was edited by:
Dirk MeinhardHi Anil,
I am back on my JDBC problem and I am one step further!
Thank you for this hint. Looks like this is the solution.
So I like to add my next question !
My new error is resulting from my query command.
I have set "=" to find a specific entry as compare operation.
Error when executing statement for table/stored proc. 'IRIS.T_ST_MAINDRIVER' (structure 'STATEMENT'): java.sql.SQLException: FATAL ERROR document format in structure 'TABLENAME': unexpected value '=' for attribute 'compare' found
Looks like this is not ok .
This is my xml of this query:
<ns0:MT_JDBC_LOOPUP_ID xmlns:ns0="http://www.xxx.org/excel">
<STATEMENT>
<TABLENAME ACTION="SELECT">
<TABLE>IRIS.T_ST_MAINDRIVER</TABLE>
<ACCESS/>
<KEY>
<MAINDRIVER compareOperation="=">Optomechanical</MAINDRIVER>
</KEY>
</TABLENAME>
</STATEMENT>
</ns0:MT_JDBC_LOOPUP_ID>
Can you, or anybody else, give the helping idea?
regards
Dirk -
Hi All,
I am executing SP by using JDBC Receiver Adapter.
My strcture is follows
<STATEMENT2>
<SP_CREATE_T_BATCH action="EXECUTE">
<spName type="VARCHAR">SP_CREATE_T_BATCH</spName>
<IN_Control_Recipe hasQuot="No" type="Integer">100000000001723850</IN_Control_Recipe>
</SP_CREATE_T_BATCH>
</STATEMENT2>
The below error I am getting
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SP_CREATE_T_BATCH' (structure 'STATEMENT2'): java.lang.NumberFormatException: For input string: "100000000001723850"
Any help on thisHi Ram,
Since you mentioned that your SP has one input parameter and one output parameter, the structure of the XML message at the JDBC receiver side should be:
<STATEMENT2>
<SP_CREATE_T_BATCH action="EXECUTE">
<IN_Control_Recipe isInput="true" hasQuot="No" type="BIGINT">100000000001723850</IN_Control_Recipe>
<Output_Parameter isOutput="true" type="SQLDataType"></Output_Parameter>
</SP_CREATE_T_BATCH>
</STATEMENT2>
Here, i have assumed the following:
SP_CREATE_T_BATCH - The name of the Stored Procedure to be executed
IN_Control_Recipe - Input parameter of the SP and its SQLDataType is BIGINT as suggested by Stefan.
Output_Parameter - Output parameter of the SP. You may enter the SQL data type as per the output of your Stored Procedure.
The following SQL data types are supported:
INTEGER, BIT, TINYINT, SMALLINT, BIGINT, FLOAT, REAL, DOUBLE, NUMERIC, DECIMAL, CHAR, VARCHAR, STRING, LONGVARCHAR, DATE, TIME, TIMESTAMP, BINARY, VARBINARY, LONGVARBINARY, BLOB (input and output),CLOB (input and output), CURSOR (output; only in conjunction with the Oracle JDBC driver).
Hope this will surely solve your problem.
Regards, Gaurav. -
A wierd error of JDBC Receiver adapter
Dear Expert,
I got stuck by the JDBC receiver adapter with PI 7.11, the log is
'JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'null' (structure 'SYSTEM'): java.lang.IndexOutOfBoundsException: Index: 1, Size: 1'
explanation :
(1)SYSTEM is the first element in my XML sent to PI and I guarantee it has value, and there is no mapping with this field in the target table.
(2)I tested mapping and comminucation channel -> successfully
(3)db is oracle and the key field is mapped with value
Looking forward to your insight. Thanks very very much
RayDear Expert :
Thanks for your reply, but I still could not figure out what had happened, it is so desperate.......
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'null' (structure 'BOOK'): java.lang.IndexOutOfBoundsException: Index: 1, Size: 1
The Oracle DB table has many fields and I mapped the key and other fields which could not be null.
I tried to create a very simple example to test like this , but still it pops up the error like before,
you can see the error message just replaces the text 'SYSTEM' to 'BOOK'.
'null' (structure 'SYSTEM'): (yesterday) -> 'null' (structure 'BOOK'): (today). What could I do????
Thanks so much for your help
<?xml version="1.0" encoding="UTF-8" ?>
<MT_RM_TEST>
<BOOK>17-1627-15</BOOK>
<NAME>Ray</NAME>
</MT_RM_TEST>
-> the XML above is my simple test XML sent (book and name are mapped to the key field and other fields which could not be nulll)
Maybe you are looking for
-
Hi, I'm newbie to the Server side of Macs, so if anyone can help with this problem, please speak in lay-man's terms. The problem I have is with my Lacie 1Tb Bigger disk which I use to store the backup catalogues etc from Retrospect. Everything was fi
-
Hi All, I have SAP MI 7.0 Installed with OS MS Windows 2003, DB MS SQL 2005. I want to Install SAP Solution Manager SR 3 on same System. Please help me to know how can i do this ? what are changes required on existing server so that both SAP server c
-
I'm still having connectivity issues
And now, an Iphoto update was interupted while downloading and is now corrupted. Can someone please help me fix the connectivity issue once and for all and guide me to correcting Iphoto. Appreciate your help. Cheers, MK James
-
XA Datasource on J2SDKEE1.3 RI server
All, trying to setup an Oracle XA datasource on the RI server. Used the j2eeadmin tool to create the DS, but when starting the server I get: Binding DataSource, name = jdbc/xa/rob9i, url = jdbc/xa/rob9i__xa java.lang.NoSuchMethodException at java.lan
-
I'm unsuccessful in my attempts to find documentation that details how to enable SSL for URL (context) in Apache. I currently have https secured communication enabled between clients and the oracle http server, but i would like to also extend this se