Error in ODS data load
Hi,
I am trying to load data to ODS from CSV file but one of the field is not getting updated.
Although, that field has data in PSA. Why is it happening???
Hi,
Is the request loaded without errors to the ODS? Check the mapping for the field in the update rules, if you are doing it in 3.x or check the Tranformations.
Hope it helps.
Veerendra.
Similar Messages
-
Hi Gurus
I am extracting data from R/3 which as Material movement.
every thing i am using standard objects only.
now i am loading 2lis_03_bf to ODS, i got error as
" <b>InfoOject SOLD_TO does not contain alpa-conforming value 104090</b>...
How can i change standard SOLD_TO_PARTY
detailed Analysis as follows
<b>Diagnosis
The system checked whether the loaded InfoObject value conforms to the
conversion exit.The check failed.
For example:
The value '1' was loaded into an InfoObject with alpha exit, even thoug
the value '0000000001' was expected.
System Response
The load process has failed or the erroneous records are displayed in
the monitor. This does not depend on how error handling is set up.
Procedure
Find out why the data does not conform to the conversion exit, and, if
possible, correct the cause. Possible causes are errors in BI Content or
an error in a customer exit in the source system.
If you cannot correct the problem, you have the option of removing the
conversion exit on the InfoObject. However, since the system has already
been converted, duplicates appear in the system again.</b>
Immediate Reply highly appreciatable
Thanks in AdvanceHi Sudheer,
Go to your transfer rule.
in the right-hand side.
Select 0SOLD_TO and move the horizontal scrollbar till end..you find one conversion..check that..
Hope i m clear.
Regards,
San! -
How to rectify the errors in master data loads & transactional data loads?
hy,
please any one tell me
How to rectify the errors in master data loads & transactional data loads?
thnQ
RaviHi,
Please post specific questions in the forum.
Please explain the error you are getting.
-Vikram -
Error in Master data load because of ###
Hello,
I am getting an error in master data load.
The problem is ####### symbols are encountered in few records.
We have defined a formula to replace the ### with S in transfer structure.
But still it does not replace the #### symbols and gives error.
But when I insert the ####### symbols manually in PSA and try to load it is replaced with the formula definition and loads the data.
Suggestions required urgently
Thanks in advance
RamHello srikanth,
Check the code below.
I have used it in the update rule to replace the #### symbol with A.
But when i check in debug mode it is not recognizing this symbol and sy-subrc ia always 4.
GV_STRING = COMM_STRUCTURE-/BIC/XXX
FIND '#' in R_STRING.
IF SY-SUBRC = 0.
REPLACE ALL OCCURRENCES OF '#' in R_STRING with 'A'.
ENDIF.
result value of the routine
RESULT = R_STRING
Thanks
Ram -
Error Message after data load (error is "1130610")
We load data using a data load rule. The data seems to load fine except we get the error message "ERROR - 1241101 - Unexpected Essbase error 1130610" on last line below? Any thoughts? Is there a guide somewhere that explains in details all the various error codes and what they refer to? We're using Essbase 6.5.1. Thanks!======================================= OK/INFO - 1003037 - Data Load Updated [364875] cells. OK/INFO - 1003024 - Data Load Elapsed Time : [428.323] seconds. ERROR - 1241101 - Unexpected Essbase error 1130610.=======================================
The explanation of error 1130610 is the following:Possible Problems - Essbase cannot open a file. Possible Solutions - If you are using an error file, make sure that the error file is being created in a directory that already exists. Make sure you are using the ESSCMD IMPORT command correctly. Put all files the ESSCMD script needs in the $ARBORPATH\APP\applicationName\databaseName directory. Run the ESSCMD script from the $ARBORPATH\APP\applicationName\databaseName directory. Check the ESSCMD script for invalid paths. Make sure every folder that the script is pointing to exists. If you are using an error file, make sure that the error file is being created in a directory that already exists.
-
Error while starting data loading on InfoPackage
Hi everybody,
I'm new at SAP BW and I'm working in the "Step-By-Step: From Data Model to the BI Application in the web" document from SAP.
I'm having a problem at the (Chapter 9 in the item c - Starting Data Load Immediately).
If anyone can help me:
Thanks,
Thiago
Below are the copy of the error from my SAP GUI.
<><><><><><><><><><<><><><><><><><><><><><><><><><><><><><><><>
Runtime Errors MESSAGE_TYPE_X
Date and Time 19.01.2009 14:41:22
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Batch - Manager for BW Processes ***********
Long text of error message:
Technical information about the message:
Message class....... "RSBATCH"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLRSBATCH" or "LRSBATCHU01"
"RSBATCH_START_PROCESS"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 701
Application server... "sun"
Network address...... "174.16.5.194"
Operating system..... "Windows NT"
Release.............. "5.1"
Hardware type........ "2x Intel 801586"
Character length.... 8 Bits
Pointer length....... 32 Bits
Work process number.. 2
Shortdump setting.... "full"
Database server... "localhost"
Database type..... "ADABAS D"
Database name..... "NSP"
Database user ID.. "SAPNSP"
Terminal.......... "sun"
Char.set.... "English_United State"
SAP kernel....... 701
created (date)... "Jul 16 2008 23:09:09"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQLDBC 7.6.4.014 CL 188347 "
Patch level. 7
Patch text.. " "
Database............. "MaxDB 7.6, MaxDB 7.7"
SAP database version. 701
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 8112
EM...... 11498256
Heap.... 0
Page.... 65536
MM Used. 6229800
MM Free. 1085264
User and Transaction
Client.............. 001
User................ "THIAGO"
Language key........ "E"
Transaction......... "RSA1 "
Transactions ID..... "CD47E6DDD55EF199B4E6001B782D539C"
Program............. "SAPLRSBATCH"
Screen.............. "SAPLRSS1 2500"
Screen line......... 7
Information on where terminated
Termination occurred in the ABAP program "SAPLRSBATCH" - in
"RSBATCH_START_PROCESS".
The main program was "RSAWBN_START ".
In the source code you have the termination point in line 340
of the (Include) program "LRSBATCHU01".
Source Code Extract
Line
SourceCde
310
endif.
311
l_lnr_callstack = l_lnr_callstack - 1.
312
endloop. " at l_t_callstack
313
endif.
314
315
*---- Eintrag für RSBATCHHEADER -
316
l_s_rsbatchheader-batch_id = i_batch_id.
317
call function 'GET_JOB_RUNTIME_INFO'
318
importing
319
jobcount = l_s_rsbatchheader-jobcount
320
jobname = l_s_rsbatchheader-jobname
321
exceptions
322
no_runtime_info = 1
323
others = 2.
324
call function 'TH_SERVER_LIST'
325
tables
326
list = l_t_server
327
exceptions
328
no_server_list = 1
329
others = 2.
330
data: l_myname type msname2.
331
call 'C_SAPGPARAM' id 'NAME' field 'rdisp/myname'
332
id 'VALUE' field l_myname.
333
read table l_t_server with key
334
name = l_myname.
335
if sy-subrc = 0.
336
l_s_rsbatchheader-host = l_t_server-host.
337
l_s_rsbatchheader-server = l_myname.
338
refresh l_t_server.
339
else.
>>>>>
message x000.
341
endif.
342
data: l_wp_index type i.
343
call function 'TH_GET_OWN_WP_NO'
344
importing
345
subrc = l_subrc
346
wp_index = l_wp_index
347
wp_pid = l_s_rsbatchheader-wp_pid.
348
if l_subrc <> 0.
349
message x000.
350
endif.
351
l_s_rsbatchheader-wp_no = l_wp_index.
352
l_s_rsbatchheader-ts_start = l_tstamps.
353
l_s_rsbatchheader-uname = sy-uname.
354
l_s_rsbatchheader-module_name = l_module_name.
355
l_s_rsbatchheader-module_type = l_module_type.
356
l_s_rsbatchheader-pc_variant = i_pc_variant.
357
l_s_rsbatchheader-pc_instance = i_pc_instance.
358
l_s_rsbatchheader-pc_logid = i_pc_logid.
359
l_s_rsbatchheader-pc_callback = i_pc_callback_at_end.Hi,
i am also getting related this issue kindly see this below short dump description.
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Variant RSPROCESS0000000000705 does not exist
Long text of error message:
Diagnosis
You selected variant 00000000705 for program RSPROCESS.
This variant does not exist.
System Response
Procedure
Correct the entry.
Technical information about the message:
Message class....... "DB"
Number.............. 612
Variable 1.......... "&0000000000705"
Variable 2.......... "RSPROCESS"
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLRSPC_BACKEND" or "LRSPC_BACKENDU05"
"RSPC_PROCESS_FINISH"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 701
Application server... "CMCBIPRD"
Network address...... "192.168.50.12"
Operating system..... "Windows NT"
Release.............. "6.1"
Hardware type........ "16x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "CMCBIPRD"
Database type..... "MSSQL"
Database name..... "BIP"
Database user ID.. "bip"
Terminal.......... "CMCBIPRD"
Char.set.... "C"
SAP kernel....... 701
created (date)... "Sep 9 2012 23:43:54"
create on........ "NT 5.2 3790 Service Pack 2 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 196
Patch text.. " "
Database............. "MSSQL 9.00.2047 or higher"
SAP database version. 701
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0, Windows NT 6.1, Windows NT 6.2"
Memory consumption
Roll.... 16192
EM...... 4189840
Heap.... 0
Page.... 16384
MM Used. 2143680
MM Free. 2043536
User and Transaction
Client.............. 001
User................ "BWREMOTE"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "9C109BE2C9FBF18BBD4BE61F13CE9693"
Program............. "SAPLRSPC_BACKEND"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "BIP"
Database Release.... 701
Kernel Release...... 701
Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "asynchron without reply and transactional (emode 0, imode
0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Information on where terminated
Termination occurred in the ABAP program "SAPLRSPC_BACKEND" - in
"RSPC_PROCESS_FINISH".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 75
of the (Include) program "LRSPC_BACKENDU05".
Source Code Extract
Line SourceCde
45 l_t_info TYPE rs_t_rscedst,
46 l_s_info TYPE rscedst,
47 l_s_mon TYPE rsmonpc,
48 l_synchronous TYPE rs_bool,
49 l_sync_debug TYPE rs_bool,
50 l_eventp TYPE btcevtparm,
51 l_eventno TYPE rspc_eventno,
52 l_t_recipients TYPE rsra_t_recipient,
52 l_t_recipients TYPE rsra_t_recipient,
53 l_s_recipients TYPE rsra_s_recipient,
54 l_sms TYPE rs_bool,
55 l_t_text TYPE rspc_t_text.
56
57 IF i_dump_at_error = rs_c_true.
58 * ==== Dump at error? => Recursive Call catching errors ====
59 CALL FUNCTION 'RSPC_PROCESS_FINISH'
60 EXPORTING
61 i_logid = i_logid
62 i_chain = i_chain
63 i_type = i_type
64 i_variant = i_variant
65 i_instance = i_instance
66 i_state = i_state
67 i_eventno = i_eventno
68 i_hold = i_hold
69 i_job_count = i_job_count
70 i_batchdate = i_batchdate
71 i_batchtime = i_batchtime
72 EXCEPTIONS
73 error_message = 1.
74 IF sy-subrc <> 0.
>>> MESSAGE ID sy-msgid TYPE 'X' NUMBER sy-msgno
76 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
77 ELSE.
78 EXIT.
79 ENDIF.
80 ENDIF.
81 * ==== Cleanup ====
82 COMMIT WORK.
83 * ==== Get Chain ====
84 IF i_chain IS INITIAL.
85 SELECT SINGLE chain_id FROM rspclogchain INTO l_chain
86 WHERE log_id = i_logid.
87 ELSE.
88 l_chain = i_chain.
89 ENDIF.
90 * ==== Lock ====
91 * ---- Lock process ----
92 DO.
93 CALL FUNCTION 'ENQUEUE_ERSPCPROCESS'
94 EXPORTING
If we do this
Use table RSSDLINIT and in OLTPSOURCRE: enter the name of the data source
And in the logsys enter the name of the source system and delete the entry for that info package. what will happen is process chain will run suceesfully and short dump will not come or what kindly give the detail explanation about this RSSDLINIT.
Regards,
poluru -
BW ERROR while doing data loading
1)while doing data load error--Processing data packet- No Data,
2)Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished.
3) Also in some cases there are 0 from 0 records and request is still Yellow i can't delete that too .what option are there to resolve such request.
What can be possible solution.Hi
First the data is come to PSA?If yes then u r problem is from PSA to Data Target.In this case Manually change the request status to red and then delete load the data.
Second If the data not at come to PSA also then check in RSA3 whetehr Data avialble or Not.If it is Delta load then check the entries in RSA7.
Regards
Ram. -
Sql loader error in offline data load
Hi,
I have done an offline schema creation using existing tablespace.
I am trying to do an offline data load using sql loader.The CTL and DAT file are generated by the work bench.
This is my CTL file code generated by workbench.
load data
infile 'Import.dat' "str '<EORD>'"
into table IMPORT
fields terminated by '<EOFD>'
trailing nullcols
When I am running the ctl file with DAT file in sql loader I am getting the following error
SQL*Loader-350: Syntax error at line 4.
Expecting single char, found "<EOFD>".
fields terminated by '<EOFD>'
^
My Sql Loader version is Release 8.0.6.3.0
Please help if anyone has came across this issue.
Thanks in advance.
Regards
Saravanan.BSaravanan,
Its a long time since I have seen 8 sql loader. Check the doc. Is it resrticted to a single character delimter??
Barry -
Error is Master Data load.
Hi Experts,
From last 1 month the ( 0MAT_UNIT ) master data load is getting failed. Its a full load. So the the target is not updated from last one month( August)
Now the problem is , when I am checking a report. The materials which are new or changed are not getting the data properly. It is because of the master data got stucked at PSA level.And I cant rectify at PSA level because, There is 673 errorneous record in 1 package.
I tried to find the invalid character , but didn't get anything.
Please suggest.
Thanks,
TapuKumarHi Anand,
This is the long text msg
Data records in the PSA were marked for data package 1 . Here there were
673 errors. The system wrote information or warnings for the remaining
data records.
System response
The data package was not updated.
Procedure
Correct the incorrect data records of the data package (for example by
manually editing them in the PSA maintenance). You can find the error
message for each of the records in the PSA by double-clicking on the
status of the record.
Note
Note that you are only allowed to edit and manually update the request
if it is contained in the request list in the data target. Where
necessary, first delete it from the data target.
And it is a master data load( Full ), The data target is a INFO OBJECT.
Please suggest, I can't rectify each and every reecord. Because the number of record id very high..
Thanks,
Tapu Kumar.
Edited by: NewToBW on Sep 2, 2010 1:42 PM -
Error in SQL Statement (ODS data loading Error)
Hello Gurus...
I am trying to loading the data Info Source To ODS in my ODS Key Figure Z_IVQUA (Invoice Quantity)
is getting the Error Message Data shows 0 from 0 Records.
I was Remove the Key Field from ODS Then try to load the data but i am getting same Error..
Error in SQL Statement: SAPSQL_INVALID_FIELDNAME F~/BIC/Z_INVQUA
Errors in source system
Please Suggest....
Thanks
PrakashHello All...
Really appreciate if you can give me some advise. Thanks.
Prakash
Edited by: Prakash M on Jan 14, 2009 2:14 PM -
Error in Data activation for ODS data load
We were succesfully loading data (delta load) so far for a CRM ODS. Suddenly, yesterday we are getting am error while trying to activate the data. - "No data packet numbers could be determined for request REQU_48C2T4S91I6GSJ4FNUE727M1Y- Message no. RSAODS119".
We could not even see the data in PSA.
Any clues why this would have happened? tRFC issue?
Thanks for your ideas/
Regards
RajHi,
What happens is data packets gets distributed across different Instances/Application Servers.
To distribute users equally on SAP Instances check SMLG Transaction and to distribute RFCs equally on SAP Instances check transaction RZ12
To assign specific BW Instance enter the instance in target system settings. In different source systems different fixed target instances can be assigned.
Check Transaction RSCUSTA2 for load balancing for activation of ODS Object data.
Hope it helps.
Mona -
Hi All
One infopackage is loading data to two ODS. It is taking long time and failed with short dump. But if we goto st22 it is not displaying any short dump. I have deleted the red requests from both the data targets and scheduled the infopackage. it is giving the same error.Hi,
The normal procedure to correct this error will first to identify if you have the data in PSA between ODS and cube. In that if you have all the data in PSA u can update it to target.
In ur case as u dont have a PSA you may have to force the request to red and delete it from target Cube then go to source ODS find the data mart (Tick mark) Confirm by making that the request that you deleted from Cube is the same as that you are going to reset datamart status in ODS (when you click on the tick mark in ODS a pop up will come asking if you want to reset datamart..there scroll to right it will show the request name in target).If its same delete the datamart status and then Trigger the infopackage again. But better to pull it to PSA only or to both PSA and target so that in case it fails again you can pull it from PSA.
If you had pulled it before resetting data mart and the request is successful but without data then u may have lost delta and may need to do a full repair.
this should solve your issue,
JituK -
Hi
I have a data source which is made from a excel file.
when i load the data from the datasource to the ODS the data is loaded is success full.
But when i try to activate the data it is showing error
the error is
There are more than 10 char. values that could NOT be assigned a SID
can any body help me
thanks in advanceHello ,
Change your Characteristics length size in your Info Object Char catalog.
I think Length mis-match between your Data Source and Characteristics.
Regards,
MaNo -
Hi all,
I have created an ODS from an InfoCube. Now, I am trying to
load data from InfoCube to ODS using export DataSource.
I am getting an error while defining the update rule on
ODS.
"0RECORDMODE is missing from the InfoSource"
How can I add 0RECORDMODE in this situation? Any other solutions?
With best regards, VSGo to the infosource, add 0recordmode to communication structure..
Regards
Manga -
Error while activating data loaded into DataStore Object in BI 7.0
Hi Guys,
I am facing the following problem :
When I load data into a Datastore Object, all the records get loaded but the job fails during activation of the data.
Below is the job log :
Activation is running: Data target 0RPM_DS07, from 77 to 77
Overlapping check with archived data areas for InfoProvider 0RPM_DS07
Check not necessary, as no data has been archived for 0RPM_DS07
Data to be activated successfully checked against archiving objects
SQL-END: 14.06.2007 12:33:25 00:00:00
SQL Error: ORA-20000: Insufficient privileges
Parallel processes (for Activation); 000003
Timeout for parallel process (for Activation): 000300
Package size (for Activation): 020000
Task handling (for Activation): Backgr Process
Server group (for Activation): No Server Group Configured
All data fields updated in mode "overwrite"
Resource error. No batch process available. Process terminated
Time limit exceeded. No return of the split processes
Resource error. No batch process available. Process terminated
Request you to kindly help me resolve this issue.
I am runnning the infopackage manually. Should I run it by a process chain??
If I run by process chain, I get the following error in 1st step:
You do not have authorization for InfoSource 0RPM_ITEM_FIN_PLANNING.
Awaiting your replies,
Thanks,
punkuj...Hi,
I think this problem remains unanswered.
The issue behind this problem is, during parellel activation the child jobs acknowledge the parent job about status. If the child job takes long time to read data from active data table, then it times out and fails.
Check the primary index on Active data table and it should be missing in your case. See the se11 index or db02 missing indexes. That is the reason that causes time out. Rebuild the primary index by asking your basis folks and repeat the activation. It should succeed.
Thanks,
Sri.
Maybe you are looking for
-
I got my 2GB nano last Monday. I could successfuly install it on my laptop and upload some songs to it. That done, I wrapped it again and gave it to my wife, so she and the kids could "surprise" me for my Birthday. Yesterday I got it,listened to the
-
Clone (not transfer) new iPad from backup of other iPad?
Hi, I already own a iPad 2 that is regularly backed up to iCloud. Now I got a new iPad Air 2 that should contain exactly the same music, movies, apps and so on. So I thought I would restore a backup of the old iPad to the new one and after that I jus
-
Fax (transmission confirmation) Report; how to generate.
I want to know how I can generate a Fax (transmission confirmation) Report. I am faxing MS Word documents, from an HP keyboard, using MS Word (2010), on an HP Elite and OfficeJet 6500A Plus hardware combo. I am faxing while using MS Word (from with
-
Print Original/Duplicate on Invoice/Purchase Order
Hi all, Is there anyway to identify particular invoice/purchase order printed before or not. (I want to print "Duplicate" in the document, if the document printed before.) Thank you, BK
-
Hi, I selected some records thru do query and printing that value in matrix in that no problem the records selected was printing correctly. Printing once if i select one record in a query means in matrix one row will be added and that record ll be pr