Error in ODS Update Rules.
Hi,
We have an abap routine in an ODS Update rules to get FISC YEAR (type NUMC 4) with a field FISCPER(numc 7) from a table. This routine worked fine. But now we moved the abap routine to cmod program in r/3, and when I am doing a direct mapping of fiscper to fiscyear, I am getting this error message 'Fiscal year variant missing for time conversion of characteristic 0FISCYEAR'. I already did a direct mapping of Fiscal year variant in the update rules.
Am I missing some thing here?
Thanks!
Yes, I am getting fiscvar as V6 from cmod program in r/3, and did a direct mapping in update rules.
Similar Messages
-
"Error when activating update rule" after changing ODS key
Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
and ODS/CUBEs correct, this means that also these objects need
to be of the same version in the source system of the transport as in
target system.
2- Please ensure all infoobjects in the cube are active.Please
reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
with the grouping option "only necessary objects" and then transport
those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete -
Error while transporting update rule.
Hi experts
I am trying to transport one update rule to production..
But it is ending with error code 8 n it is giving me following error :
Errors when activating update rule XXX
IC=0PP_DS03 IS=0CO_OM_OPA_6 error when checking update rules
Kindly tell me what need to be done now.
Regards
SwatiHi Swati,
Before transporting the update rule, in the present scenario, you have to transport the infosource which contains the corresponding "0recordmode".
Whenever you transport anything into the quality or production, the list should be as followed in the given manner :
Seq No Objects in Request
1 Package(DEVC), InfoArea(AREA), Application Component(APCO)
2 Function Modules
3 Keyfigure Catalog(IOBC), Keyfigures(IOBJ), Units(IOBJ)
4 Characteristic Catalog(IOBC), Characteristic Infoobjects(IOBJ)
5 Infosources (ISCS, ISTD, ISMP, ISTS, ISFS, ROUT) and
Generic Data Sources(DataSrce Active Version(OSOA), ISMP, ISTS,DataSourceReplica (ISFS)
and Tables (TABL)
6 Infoproviders(ODS(ODSO), Cube(CUBE), Infoset(ISET))
7 Update Rules(UPDR, ROUT)
8 Infopackages(ISIP)
9 Queries(ELEM)
10 Webtemplates(TMPL, BLTM, BPTM)
Just transport all your things in the above sequence, and it will be done successfully.
Also, remember there should not be any data in the corresponding infoprovider while you transfer the update rule, else it will fail.
Hope it helps,
Regards,
Neha. -
Error when activating update rule after transporting to QA
Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
VijayHi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini -
Error in Transporting Update Rules
Hi,
I am transporting ODS, Info package and UPdate Rule from Dev to QA.
I request seems to be fine, but transport ended in error.
ODS, IP and UR got transported , but the UR is inactive.
and i dont havr the permission to activate that in QA system.
What could be the reason for inactive UR in QA.I have done that also,
But it is giving error as :
Error when activating update rule 49U3N0VD2IJOOELH5APVBBIP1
Activation of the update rules for ZFY6_SDT ZIB_SHIPDAILY_TRAN
IC=ZFY6_SDT IS=ZIB_SHIPDAILY_TRAN error when checking the update rules
Start of the after-import method for object type R3TR UPDR (Delete Mode)
Update rules 49U3N0VD2IJOOELH5APVBBIP1 read in version M
Errors occurred during post-handling RS_AFTER_IMPORT for UPDR L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Please help me out, all the dependent objects are present in the QA
Dependent Objects:
Info Objects
ODS
Info Source
Transfer and comm str
Info pacakge -
'L_CHAVL_IN' Error while Activating Update Rules.
Hi All,
when i am tring to activate my update rules, it is giving error, field "L_CHAVL_IN' in unknown. I dont have that field in my objects.
i found that field in 'Progarm' for the update rules. that field is used in the exit of one of the feild in the update rules.
Please give me a solution how to solve this.
Regards,
Ramana.Check the following SAP Note (# 782858)
<b>Symptom</b>
When you activate the update rules, the system issues a syntax error: 'Syntax error: Field "L_CHAVL_IN" is unknown'.
<b>Other terms</b>
Syntax error; generation; l_chavl_in; update rules
<b>Reason and Prerequisites</b>
This is a program error. The error only occurs under the following circumstances:
You generate an optimized update rule;
An alpha conversion is required.
<b>Solution</b>
BW 3.0B
Import Support Package 25 for BW 3.0B (BW3.0B Support Package 25 or SAPKW30B25) into your BW system. The Support Package will be available once note 0723254 with the short text, "SAPBWNews BW3.0B Support Package 25", which describes the Support Package in more detail, is released for customers.
BW 3.10 Content
Import Support Package 19 for BW 3.10 (BW3.10 Support Package 19 or SAPKW31019) into your BW system. The Support Package will be available once note 0723261 with the short text, "SAPBWNews BW 3.1 Content Support Package 19", which describes the Support Package in more detail, is released for customers.
BW 3.50
Import Support Package 10 for BW 3.5 (BW3.50 Support Package 10 or SAPKW35010) into your BW system. The Support Package will be available oncenote 0763336 with the short text, "SAPBWNews BW Support Package 10 NetWeaver'04 stack 10", which describes the Support Package in more detail, is released for customers.
Assign pts if helpful.<b></b> -
Error when activating update rule
HI BI Expert,
The original transfer rule for 2LIS_11_VAITM was deleted accidently and I created new one and mapped with the existing infosource. The system always generates the following error at the time of transport to another client.
Error when activating update rule D1GOAPD9O0P9CFOY8KBSOUDFA
Activation of the update rules for ZO_SOP_1 ZT_SOP_SALO_ITM
IC=ZO_SOP_1 IS=ZT_SOP_SALO_ITM error when checking the update rules.
Would you kindly be able to suggest me what steps I need to take so as to correct this issue?
Thanks.Hi,
When you say that update rule was accidently deleted, was that attached to transport request and transported to your QA & PRD at that time.
Because it may happen that, your old rules are still there in QA & PRD and the new rules are failing to overwrite that.
If it is the case, then you may have to open the client for QA & PRD and delete the existing update rule (doesnt sound good practice though), and then create a fresh update rule and transport.
Rgds,
Vikram.
Rgds,
Vikram. -
Error while activating update rule in Inventory
I was working with migration of datasource 2LIS_03_BF from 3.x to 7.0 in MM module.
Recieved an error while activating update rule 0RT_C17 2LIS_03_BF in Inventory module.
When I checked the routine ,it shows the following error.
Errror:E:The Dictionary structure or table "/BI0/PMAT_SALES" is either not active or does not exist.
I am not usre how to resolve this.
Kindly reply asap.1. Activate the master data infoobject for 0MAT_SALES at info object level of RSA1
2. Replicate and Activate the data source once again by using the program > SE38 : RS_TRANSTRU_ACTIVATE_ALL
3. Then try to migrate you datasource and activate you update rules.
it may help you
Regards.
Rambabu -
Error when transpotring Update Rules
Dear colleagues.
When transporting an update Rules into our Quality enviroment the system pops up the following error:
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS syntax error: rows 0.
I've verified the Update Rules on the Quality System and everything is correct but it remains inactive due to the transport fails.
I would appreciate your feedback.
Thanks in advance.Dear khaja.
I send you the transport log as well as the Return Code.
Error when activating update rule 5MYASZMBOIQZSRR60674OBKJ3
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS error when generating InfoCube Update program
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS syntax error: rows 0 (When generating the update program for data target ZWEPP_C02, InfoSource ZWE_BOM_RMX_IS, a syntax error occured in row 0. Message no. RSAU466)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
Please, let me know if you need anything else.
Thanks. -
Error when copying update rules!!!
Hello All,
I am trying install 0SD_C03 from business content, however I am getting following error. Cube got installed properly.
Error when copying update rules
Patch levels are
SAP_BW - 0014
BI_CONT - 0005
Please help me in solving this error.
Regards,
PNKHi,
The error message show as below. There is no longtext
Error when copying update rules
Message no. RSAU457
But, when I installed FI-AP cubes, update rules are installed without any error. Is there any settings differs from FI to logistics datasources?
Regards,
PNK -
ASSERTION FAILED error while migrating update rules
Hi all,
We are migrating the 3.x datasource for sd - lo cockpit.
Migration steps are as follows...
1. Make a copy of the infosouce. Activate it.
2. Migrate transfer rules. Activate it.
3. Migrate datasource.
4. Migrate Update rules for the respective info providers.
But while migrating update rules ASSERTION_FAILED runtime error occurs.
the assert condition was violated.
CL_RSTRAN_TEMPLATE========CP or CL_RSTRAN_TEMPLATE======CM003
Please help i tried all the means to rectify but none succeds.
It is occuring for each datasource .
Thanks in advance.
aravindHello
Assertion statement is like a conditional break point in ABAP. When you are trying to migrate the update rules,it is failing with Assertion statement it means there is some error with your update rules. Either the mapping is wrong or the the target to which it is mapped is in inactive state. Please check these and retry your migration.
Regards,
Krishna Tangudu -
Error while transfering update rules
Hi all,
I am trying to transfer business content for 0SRCT_DS1(Contract Management) from D to Q in BW3.5.
Everything went through except for the update rules.
I checked and rechecked if all the infoobjects are active.
But still am getting the following error:
Start of the after-import method for object type R3TR UPDR (Activation Mode)
Update rules CB1GEUI48SB210JQAYD68E74J read in version M
Error when activating update rule CB1GEUI48SB210JQAYD68E74J
Activation of the update rules for 0SRCT_DS1 2LIS_02_SCL
IC=0SRCT_DS1 IS=2LIS_02_SCL error when checking the update rules
any suggestions?Hi ,
Just check whether update rules has any routines or fomula, or constant.
If so collect that in a request and transport it.
Assign points if it is helpful.
Thanks
Shanba -
Error while Transporting Update Rules.
hi xperts,
I am getting Error while Transporting the Update rules,i already transported the INFOCUBE,INFOPACKAGE EVERYTHING.
Start of the after-import method for object type R3TR ROUT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
The errors affect the following components:
BW-WHM (Warehouse Management)
Is the error,I didn't change any thing in the Cube or changes to Update rules.
Can anybody Help me?.
thanking you,
with regards,
Narendra.Hi,
Are you still facuing the issue ?
No need to worry about the routines, once you save the update rules if there is any routines in it it will be saved in the same request. If you want to check the routines you can check in the transport connections. Transfer the update rule to the right hand side of the screen and you can see all the routines that belong to the UR.
If you know the technical names of the routines you can check in the TADIR table.
Have you transported the info-sources for this update rules ? why not you again capture the info-source and the update rule in a single request and transport again.
Hope it helps.
Thanks,
Soumya -
Getting error while activatinb update rule 2LIS_02_SCL
Hello BW gurus,
I have activated and replicated datasources for PP and activated the 0PUR_C01 infocube now I am activating the update rule 2LIS_02_SCL but while activating the update rule iam getting error message
"Object UPDR CD2NYEJKIIFCCFA9FW1OQRONE could not be found"
which is nothing but the technical name of 2LIS_02_SCL. in GROUPING TAB I have selected " only necessary objects" option.
Any help on this is greatly appreciated can you please suggest me how I can troubleshoot this.
I will assign points to all appropriate answers.
Thank you,
KrishHi Krish
Don't worry about the error message.
RSA1-> Business content-> here select the update rules from 2LIS_02_SCL to cube 0PUR_C01 and with only necessary objects option-> Install update rules with applicable routines. Then refresh RSA1 and check for update rules. If still you don't get update rules, please let me know
Regards
Pradip -
ABAP Runtime error while activating Update rules.
Hi Gurus,
Actually we are in NW 2004's SP9.
While activating the update rules of cube "0PY_PPC01" it is going to ABAP runtime error. It is giving the key words like "MESSAGE_TYPE_X"
"%_T005K2" or "INSTANTIATE". And i apply NOTEs also i am unable to fix it.
Can any one give correct NOTE number that can fix it or any suggestions.
Thanks in advance.
Thanks
Raju.kHi Sven,
Now we are also in SP11, But the thing is all the other UR are working fine Except
this UR. Even there is no perticular NOTE number for this.
Thanks
Raju.k
Maybe you are looking for
-
This just started recently and all the other suggestions did not work. So i am trying to get a more up to date solution to this problem please help.
-
One of my offsite SMEs cannot view PDFs I generate for Acrobat shared review. None of my other offsite SMEs report the same problem and all access the network using the same VPN. In her case, the PDF displays with the text blacked out (as though it's
-
I can't restore my iPhone! Help!
I tried to restore my iphone, because I was experiencing problems synching the iphone. I tried to restore it, and now the iPhone won't restore stating that the device isn't connected to iTunes, which it is. It starts connected, but as the software st
-
Trouble with socket gateway and an as3 xmlsocket connection
I succesfully set up the socket gateway and am able to conect to the CF socket gateway and send data from flash to the gateway. The error I keep getting is when I add return value to the "onIncomingMessage"... cf error always logs "Cannot send outgoi
-
Share to podcast from garage band
My Garageband "Share" menu will not let me "Create podcast." Any suggestions?