Error in ODS

Hi All,
I created a generic datasource in R/3 and the data is pulled in R/3 successfully. After replication of the datasource, I created a ODS. While monitoring the Info Package, it is showing error. But data is there in the New data.
Can u pls help me to solve the problem...
Regards,
Yokesh.

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) SM58 and BD87 for pending tRFCs and IDOCS.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - System log can also be helpful.
Thanks,
JituK

Similar Messages

Error reading 'ods' passwd from wallet!!!!!

I did:
c:\>oidmon connect=hahldap start
(No errors).
C:\>oidctl connect=hahldap server=oidldapd host=192.168.1.100 instance=1 start
gsluwpwaGetWalletPasswd: Opening 2 file failed with error 11005
[gslusw]:Error reading 'ods' passwd from wallet
[gsdsiConnect]:Error reading 'ods' passwd from wallet
Could not connect to the Database.
What could be the reason??? I am running on WinXP Is it the problem?
Installation went fine for both Metadata repository and for the Oracle Internet Directory.
Note: I couldn't find the service OracleDirectoryService_xxx at all, does that mean the installation is incorrect?
thanks.

Any resolution here :
My listener is up
My DB is up and accessible, but when issuing the following command I get following error .
Any chance you can offer some advice ?
oidmon start
2006/03/01:12:58:32 * gsluwpwaGetWalletPasswd: Opening 3 file failed with error 11005
2006/03/01:12:58:32 * [gslusw]:Error reading 'ods' passwd from wallet
2006/03/01:12:58:32 * [gsdsiConnect]:Error reading 'ods' passwd from wallet
2006/03/01:12:58:32 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
Im on Unix

Error activating ODS object.

Hi Experts,
None of the ODS objects gets activated and following are the error messages that i get when i try to activate a ODS object :
Object ZRSMODS could not be activated

"
Message no. R7I028
Transfer structure prefix for source system T90CLNT090 is not defined
Message no. RSAR325
Diagnosis
A prefix is defined for the source system for determining cross-system unique transfer structure names. This prefix is not defined between your source system T90CLNT090 and Warehouse T90CLNT090. There was probably an error when creating the source system.
Procedure
If you have not yet loaded data from this source system, delete the source system and then recreate it.
If the problem occurs again, check the SAP Support Portal. Create a new problem message, if necessary.
Error when creating the export DataSource and dependent Objects
Message no. RSDODSO169
"
Pls send a solution asap. Thank you for the same.

Hi Aravind,
Have a look on the following points and see if they are satisfied in your case:
Check all characteristics involved as described below:
1. Check the Compounding and Attributes tabs in the characteristics maintenance.
2. All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
3. After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.
Because of this you may sometimes get the same error while activating the ODS object.
Hope it helps...
Best Regards,
DMK
*Assign points if it helps...

Invalid characters error while ODS activation

I have 2 queries regarding Invalid characters
1) I got following error while activating ODS.
Value 'HYDERABAD - IV COMMISSIONERATE ' (hex. '485944455241424144202D204956A020434F4D4D495353494F') of characteristic ZEXCRG contains invalid characters
 I added space (ALT+255) in RSKC as suggested in other threads and activated the ODS.('-' is already there in RSKC).
Above record did not give any error but got the same error for another record.
Value 'SURAT II ' (hex. '53555241542096204949 ') of characteristic ZEXCRG contains invalid characters
 Can anybody tell me why there is difference between in representation(HEX) of same char and which char should I add to RSKC to solve the error?
2) RSKC_ALLOWED_CHAR_GET lists the space as default allowed char, so why do I need to add the same again?

Hi Vikram:
go to RSKC: do a ALL_CAPITAL. then do the permitted charcters in BW(do a F1 and copy all and paste). also, please be advised that add ~ (tilda) and take a closer look at the error you got and insert that there.
hope it should fix the issue.
assign points if helpful
kalyan

SID Error while ODS activation

Hi,
I am getting the Invalid charcterisitc error while Activating ODS. This ODS consists 0vendor as attribute of 0material.
Now I have checked the entires for this 0vendor with respective 0material and there is no entires found for Vendor. Then where should I change invalid char for vendor.
regards,
Venkat

Hi Harish,
I am getting the following error while activating the DSO (we are using BI 7.0).
Value 're1090' (hex. '007200650031003000390030') of characteristic 0VENDOR contains invalid characters
I could not find Invalid char in PSA as 0Vendor is an attribute for 0material.
My concerns are:
1) If 0vendor is having Invalid Char the load should fail when we are loading data for 0Material.
2) As per the error message I could not find any Invalid char to find out.
3) Where should I change this Invalid char (0Vendor / 0materail).
Regards,
Venkat

Error in ODS Update Rules.

Hi,
We have an abap routine in an ODS Update rules to get FISC YEAR (type NUMC 4) with a field FISCPER(numc 7) from a table. This routine worked fine. But now we moved the abap routine to cmod program in r/3, and when I am doing a direct mapping of fiscper to fiscyear, I am getting this error message 'Fiscal year variant missing for time conversion of characteristic 0FISCYEAR'. I already did a direct mapping of Fiscal year variant in the update rules.
Am I missing some thing here?
Thanks!

Yes, I am getting fiscvar as V6 from cmod program in r/3, and did a direct mapping in update rules.

Runtime Error during ODS Activation: UNCAUGHT_EXCEPTION, Exception - CX_PARAMETER_INVALID_RANGE

Hi,
I was trying to activate an ODS while loading the data from a FlatFile using SAP BW 7.4.
The Data was loaded completely in correct format in the PSA and also into the New Data and Change log tables in the ODS.
But when trying to activate the ODS, it shows me an error.
The description of the RunTime exception is :
"An exception has occurred which is explained in more detail below. The exception is assigned to class 'CX_PARAMETER_INVALID_RANGE' and was not caught
in procedure "GET_NEXT_PACKAGE" "(METHOD)", nor was it propagated by a RAISING clause. Since the caller of the procedure could not have anticipated this exception, the current program was terminated.
The reason for the exception is: Parameter has invalid value: Parameter IM_TEMPERATURE has invalid value 01011900."
Can you please help me solving this issue?
Thanks,
Bhaskar

Hi Bhaskar,
The message seems to be soft clear, and near of a bad value format, a parameter bad informed.
"Parameter has invalid value: Parameter IM_TEMPERATURE has invalid value01011900" Try to pass a "0" in order to know if this is the parameter or field. And check the Data Type spected.
Regards

Error in ODS data load

Hi,
I am trying to load data to ODS from CSV file but one of the field is not getting updated.
Although, that field has data in PSA. Why is it happening???

Hi,
Is the request loaded without errors to the ODS? Check the mapping for the field in the update rules, if you are doing it in 3.x or check the Tranformations.
Hope it helps.
Veerendra.

Process chains:error in ods

Hi, I am experimenting and learning how to create process chains on my own.
I took ODs as process type and ran it. The last processcame out as red. The error says,
Delete init. request REQU_4N73RNLEHQ5F9CW523WV7OUN9 before running init. again with same selection
Can you please tell me what the meaning of this is. Also, how do I find out where this request number is? is ther any table which shows all the request numbers and to which target it belongs?
Thanks,
Sam

Hi Radha
Can you please email me ASAP the documents for step by step process chain creation
Thank You in Advance.
My Mail id is [email protected]
Regards
Edited by: vanjani_b on Feb 13, 2008 11:34 AM

Error in ODS Activation

Hi Friends,
I got error when the ODS activating in Process Chain.
The Error Messages are
1. Inconsistent aggregation behavior - activation will be terminated.
2 Activation of M records from DataStore object 0PUR_DS03 terminated
in the data target (ODS) the request are in Red but activated as it is showing Request For Reporting Available flag having Query symbol..means the requests are available for reporting.
What should be the possible reason
How should i rectify it.
Thanks&Regards
Anand

hi,
I have activated ODS manually yesterday. the chain ran today.
But today i got the below error while data is loading into ODS.
Error Message Below.
Runtime Errors         RAISE_EXCEPTION
Date and Time          07.04.2009 03:43:06
Short text
     Exception condition "NOT_EXIST" raised.
What happened?
     The current ABAP/4 program encountered an unexpected
     situation.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     A RAISE statement in the program "SAPLRSSM" raised the exception
     condition "NOT_EXIST".
     Since the exception was not intercepted by a superior
     program, processing was terminated.
     Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Please sugeest to resolve the problem
Regards
Anand

Error activating ODS-Inconsistency DD - DB ?

Hi BW Gurus,
My requirement is to change the field length of one InfoObject used in ODS object(ODS_T) from Numeric 3 to Numeric 4. When doing the activation of ODS, the system prompt for continue with Activate and Adjust Database in SE14. However, some error occurred during adjusting the databse. After i corrected the error, i resume the adjustment of databse but still ended with error in Step 6. Therefore i delete the ODS Object(ODS_T) and recreate a new ODS using the same name.
When i try to activate the ODS, ODS Object couldn't be activated, below error returned:
The dictionary activation module could not activate all objects.
/BIC/AODS_T00: Inconsistency DD <-> DB (check table with analysis tool)
A table called /BIC/AODS_T00 exists in the database
No active nametab exists for /BIC/AODS_T00
Termination due to inconsistencies
Table /BIC/AODS_T00 (Statements could not be generated)
DDIC Object TABL /BIC/AODS_T00 hast not been activated
Error when activation ODS Object ODS_T
How can I correct this error? Please advice.
Thanks in advance.

Hi,
Try Tcode RSRV.
Run RSRV check on the DSO. If you found any error repair it.
RSRV is a diagnostic tool in BW, System will automatically corrects if there are any inconsistencies with the BW objects
It is used for Analysis and Repair purpose of BW objects like:
1. Master Data Consistency Checks
2. Transaction Data Consistency Checks
3. Size of Dimensio tables
4. Checking SID values
5. PSA duplicate record check
6. Checking Aggregates
7. Partitions of Info cuses etc...
You can check everything.
Just expand it > drag n drop the required test to the right panel and give the object > execute.
thanks,
JituK

Error in ODS loading

Hi Friends,
While loading data into the ODS throgh i am getting short Dump Error.
Could you please suggest what might be the reason and please provide me the solution....
The is not arriving into PSA Also.............
in the monitor it is Showing ( 0 from 11234)
Here i am sending the Short Dump Error message....
Short text
    Exception condition "NOT_EXIST" raised.
What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    A RAISE statement in the program "SAPLRSSM" raised the exception
    condition "NOT_EXIST".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
   For detailed documentation of the exception condition, use
   Transaction SE37 (Function Library). You can take the called
   function module from the display of active calls.
How to correct the error
   If the error occures in a non-modified SAP program, you may be able to
   find an interim solution in an SAP Note.
   If you have access to SAP Notes, carry out a search with the following
   keywords:
   "RAISE_EXCEPTION" " "
   "SAPLRSSM" or "LRSSMU55"
   "RSSM_CONVERT_ODSSID_RNRSID"
   or
   "SAPLRSSM" "NOT_EXIST"
   or
   "SAPMSSY1 " "NOT_EXIST"
Thanks&Regards
Anand Reddy

Hi,
Please give me the code part of the log.
The select statement is failed to get the record which is having Higher Request ID then the current one! I have code for fix that error. But before that I just want to see the code Part of the log.
Thanks,
Saru

Load error in ODS

Hi all,
We are doing unit testing.For this i am trying to load the data psa then into ODS.There are three info packages we have created for full,init and delata.One week back we have loaded the data using delta and it was successful.
Now to day i am trying to load the data using it is giving 0 records.
When i am trying to load the data using full it is giving the following error
(Full 2.146 has overlapping selections with init. 0000002056 : No updates into ODS ZXXX )
Please help me out to find the solution for this.
Thanks to all

Hi,
You have to amke your FULL infopackage...as.."Repair full request".
Go to that full infopackage-in menu-Schedule-> Repair full request.
Save.
check out this...
ODS Object switch from Delta to Full Upload
Hope i m clear.
Regards,
San!
Message was edited by: San!

Error in ods activation due to lack of roles

Hi Experts,
When i am trying to actvate ods its failed due to lack of roles in my server so which role i need to create for this?
David

activate ods may cause to create new master data , so I think you may need to check sm37 and st22 to check which infoObject cause this error.
RL

Error while ODS activation

Hi Every body,
I got this error while activation of data in an ODS. The data is avaliable in the New dta atable , but while activation it is giving the errors of Invalid characters and error when assigning SID. Can anyone help.
Thnaks in advance,
Raj.

I am facing similar problem in the 0FIAP_O03 ODS.
One particular value 'CC ·µÐ¼þ' for field 0REF_DOC_NO gives error in Activation.0REF_DOC_NUM does not have any masterdata but the SID table is exists. We have ALL_CAPITAL in RSKC.
One strage observation was when I tried loading this value[value copied from the error message in a PSA] in Developement Box it was successfull.
I Do not understand if I am missing some setting in Production.
The Errors are
BRAIN 60 Value 'CC ·µÐ¼þ' (hex. '434320B7B5D0ADBCFE') of characteristic 0REF_DOC_NO contains invalid charact
RSDRO 303 Error when assigning SID (details in long text)
The SID did not get created in Prod but was created in Dev. ODS is available for reporting and it has to remain such.
If you have any Insights please help me as well.

Activation error in ODS:URGENT

Hi All !
The data was loaded successfully to ODS but there was activation failure due to Communication error ( RFC call ) occured .
Moreover , it is saying ..Request REQU_1W740A2GOY7338IOPKOF2VC4F , data package 000001 incorrect with status 9 .
Could tell me the reason ? And some more details about status . Sometimes it is giving Status1 , 2 , 9 . What does this mean ?

Hi Rajib Goon
Just rerun the Activation Job Since its succesfull up to loading . If not just make
the Qm status in to manuall red though its in red and then just reschedule the
INfopak .Be fore rescheduling make just have a check reg RFC connectivity from u
r Basis Team.
Thanks & Regards
R M K
**Winners dont do different things,they do things differently**
> Hi All !
>
> The data was loaded successfully to ODS but there was
> activation failure due to Communication error (
> RFC call ) occured .
>
> Moreover , it is saying ..Request
> REQU_1W740A2GOY7338IOPKOF2VC4F , data package 000001
> incorrect with status 9 .
>
> Could tell me the reason ? And some more details
> about status . Sometimes it is giving Status1 , 2 , 9
> . What does this mean ?

Error in ODS

Similar Messages

Maybe you are looking for