Error in OHW Configuration when accessing OCS help from OCS Admin Page

Hi.
Getting "Error in OHW Configuration OHW configuration file error detected. Please contact the system administrator." when i try to access help info from the OCS Adminsitration Page.
Any feedback on what's wrong is welcomed ...!
Regards, Luis ...!

http://dbatoolz.orapros.com/tp/3125.how-to_recreate_corrupted_ohwconfig-xml.html

Similar Messages

DBIF_RSQL_SQL_ERROR: SQL error in the database when accessing a table

Hi Gurus,
Im getting DBIF_RSQL_SQL_ERROR: SQL error in the database when accessing a table error while I was importing support pack in the system. This is ERP 6.0 with EHP4 with MS SQL in back ground and I was applying the BASIS SP 04. It was in the TEST scenario and in the SPDD_SPAU_CHECK phase it threw the error.
Short text
    SQL error in the database when accessing a table.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
How to correct the error
    Database error text........: "[601] Could not continue scan with NOLOCK due to
     data movement."
    Internal call code.........: "[RSQL/FTCH/E071 ]"
    Please check the entries in the system log (Transaction SM21).
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
    "SAPLSVRT" or "LSVRTU01"
    "TR_LAST_IMPORT_OF_OBJECT"
SPAM is ending with the above short dump. I have checked the space availability and it is OK.
Kindly help.
Renju Aravind.

Hi,
this error is very often seen in case of a database corruptions. Please follow note 142731 and perform a complete database check. Send the results when they show errors.
Best regards
Clas

Root cause of "SQL error in the database when accessing a table. "

Dear experts,
I meet this dump "SQL error in the database when accessing a table" when executing a sql.
Sql:
    SELECT sesssessno poscrm_serplan_id poscrm_ser_h_id poscrm_ser_i_id
           possolution_id sessbundle_id sessdbid sessinstno pos~crm_ordered_prod
           sessdbid sessinstno
      INTO CORRESPONDING FIELDS OF TABLE et_sess_list
      FROM dsvassessadmin AS sess JOIN service_posn_sm AS pos
        ON possession_id     = sesssessno
      FOR ALL ENTRIES IN lt_contractno
      WHERE sess~contractno = lt_contractno-contract_no
       AND sess~status IN lt_status_range
       AND bundle_id IN lt_bundle_id
       AND pos~solution_id GT 0
This sql works well in dev system SD7, however, it causes dump in another dev system "SMV".
Can anyone give me any ideas?
Thanks

Hi Jovito,
This is info from ST22
Short text
    SQL error in the database when accessing a table.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
How to correct the error
    Database error text........: "SQL0101N The statement is too long or too
     complex. SQLSTATE=54001"    Internal call code.........: "[RSQL/OPEN/DSVASSESSADMIN ]"
    Please check the entries in the system log (Transaction SM21).
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
    "CL_AGS_SERVICE_SERV===========CP" or "CL_AGS_SERVICE_SERV===========CM018"
    "GET_OVS_SESSION_LIST"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    The exception must either be prevented, caught within proedure
    "GET_OVS_SESSION_LIST" "(METHOD)", or its possible occurrence must be declared
     in the
    RAISING clause of the procedure.
    To prevent the exception, note the following:
It seems that after translation the native sql is too long. But I think this can be solved.

Inbound-Queue SYSFAIL: SQL error in the database when accessing a table

Hi,
we send around 80 IDoc simultaneously, there 15 are stuck.
They all have SYSFAIL in SMQ2 with message: SQL error in the database when accessing a table
I already unlocked the queues and try to resend. Nothing happend!
I ran RSQIWKEX for the single queus but now there are new queues in Status SYSFAIL.
I already checked some entries in forum and blogs, but nothing worked out yet!
Can someone help?! it's urgent!!
br

Hi, well as mentioned i searched and found this already.
But in ST22 i got error concerning
Laufzeitfehler DBIF_RSQL_SQL_ERROR
Ausnahme CX_SY_OPEN_SQL_DB
So i guess it's something more serious.
Any more ideas?!
Can i simply delete the stucked queues and reporcess them?!
br

SQL error in the database when accessing a table.

Hi,
I got below error at production server. Please suggest how to reslove this error.
 
 
 
Runtime Errors DBIF_RSQL_SQL_ERROR
 
Exception CX_SY_OPEN_SQL_DB
 
Date and Time 02.01.2011 15:55:06
 
 
 
 
 
Short text
 
SQL error in the database when accessing a table.
 
 
 
How to correct the error
 
Database error text........: "[10054] TCP Provider: An existing connection was
 
forcibly closed by the remote host.
 
[10054] Communication link failure"
 
Internal call code.........: "[RSQL/INSR/SWFCNTBUF ]"
 
Please check the entries in the system log (Transaction SM21).
 
 
If the error occures in a non-modified SAP program, you may be able to
 
find an interim solution in an SAP Note.
 
If you have access to SAP Notes, carry out a search with the following
 
keywords:
 
 
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
 
"CL_SWF_CNT_FACTORY_SHMEM======CP" or "CL_SWF_CNT_FACTORY_SHMEM======CM001"
 
| "ADD_INSTANCE"
 
 
 
Information on where terminated
 
Termination occurred in the ABAP program "CL_SWF_CNT_FACTORY_SHMEM======CP" -
 
in "ADD_INSTANCE".
 
The main program was "SAPMSSY1 ".
 
 
In the source code you have the termination point in line 16
 
of the (Include) program "CL_SWF_CNT_FACTORY_SHMEM======CM001".
 
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
 
procedure "ADD_INSTANCE" "(METHOD)", but it was neither handled locally nor
 
declared
 
in the RAISING clause of its signature.
 
 
The procedure is in program "CL_SWF_CNT_FACTORY_SHMEM======CP "; its source
 
code begins in line
 
1 of the (Include program "CL_SWF_CNT_FACTORY_SHMEM======CM001 ".
 
 
 
 
Source Code Extract
 
 
Line
SourceCde
 
 
1
METHOD add_instance .
 
2
 
3
data: ls_id type swfcntbuf.
 
4
 
5
check buffer method - store in local buffer if necessary
 
6
retcode = cl_swf_cnt_factory=>add_instance( ibf_por = ibf_por instance = instance ).
 
7
 
8
CHECK m_buffer_method EQ mc_buffer_shared.
 
9
 
10
append key to list of tasks to add stored in database table SWFCNTBUF
 
11
will be evaluated by build process for shared memory area (UPDATE_BUFFER method)
 
12
 
13
ls_id-mandt = sy-mandt.
 
14
ls_id-id = ibf_por.
 
15
 
>>>>>
INSERT swfcntbuf CONNECTION r/3*wfcontainer
 
17
FROM ls_id.
 
18
 
19
IF sy-subrc EQ 0.
 
20
Commit seems to be necessary always, even if INSERT has failed, to get rid of
 
21
database locks
 
22
COMMIT CONNECTION r/3*wfcontainer.
 
23
ENDIF.
 
24
 
25
ENDMETHOD.
 

duplicate here SQL error in the database when accessing a table.
Do not post the same question in more than on forum.

DBIF_RSQL_SQL_ERROR with SQL error in the database when accessing a table.

dear all,
i have done a system copy from production server into quality server. quality was scrapped and freshly installed with SAP then used the DB flush method to carry out the system copy. i had to change the DBS_ORA_SCHEMA in environment variables to SAP<SOURCE SID> from SAPSR3. the sap version is ECC6.0,DB is ORACLE10.2 on WIN NT.
after MMC opened, i get "SQL error in the database when accessing a table" error is coming. in SM21, I am getting "Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000 )
Database error 8103 at SEL access to table TBTCO
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
Database error 8103 at FET access to table TBTCP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
Delete session 001 after error 023
Database error 8103 at DEL access to table TMSALOGAR
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Database error 8103 at FET access to table SNAP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Transaction Canceled SY 002 ( SQL error in the database when accessing a table. )
Database error 8103 at FET access to table TSP02"
please find the st22 DUMP:
ow to correct the error |
Database error text........: "ORA-08103: object no longer exists"
Internal call code.........: "[RSQL/READ/TBTCO ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPMSSY2" or "SAPMSSY2"
"INITIATE_JOB_START"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"INITIATE_JOB_START" "(FORM)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
|
please do me this favor if you know to avoid this problem..
thanks a lot..

Hello Anuj,
This is because the COUNT(*) is returning a value which is longer than the INT4 data type it is expecting. If you restrict the selection by introducing a WHERE clause, then you won't get the dump:
DATA: dyn_from TYPE string,
 dyn_where TYPE string,
 gx_sql_err TYPE REF TO cx_sy_open_sql_error,
 gv_text TYPE string.
dyn_from = `DD01L INNER JOIN DD02L ON DD02L~AS4LOCAL = DD01L~AS4LOCAL AND DD02L~AS4VERS = DD01L~AS4VERS`.
dyn_where = `DOMNAME LIKE 'Z%'`.
TRY .
 SELECT COUNT(*) FROM (dyn_from) WHERE (dyn_where).
 WRITE: / sy-dbcnt NO-GROUPING.
CATCH: cx_sy_open_sql_db INTO gx_sql_err,
 cx_sy_dynamic_osql_semantics INTO gx_sql_err,
 cx_sy_dynamic_osql_syntax INTO gx_sql_err.
ENDTRY.
IF gx_sql_err IS BOUND.
gv_text = gx_sql_err->get_text( ).
WRITE: / gv_text.
ENDIF.
BR,
Suhas

Error: Object Required apperas when accessing Content Admin Portal Content

After installing Ep 7.0 sp16 Portal and logging in as Administrator we get
Error: Object Required apperas when accessing Content Admin >Portal Content
The same error appears when trying to access System Admin > permissions.
Anything to do with catolog search is throwing Error: Object Required popup.
Appreciate feedback in resolving this.
Rajesh.R.

I have just started to get this error as well... On my computer I get the "Error: Object Required" when accessing the Portal Content page but if I log in on someone elses computer using the same browser, OS, etc The error does not appear and I am able to browse the Portal Content.
Any more insight on the resolution to this issue would be appreciated.

Getting error "SQL error in the database when accessing a table."

Hi All,
We are getting Dump Error SQL error in the database when accessing a table for the batch job EISSD/REQUISITION 14 / which includes program AQ20FD==========A2============. Please reply. The Dump error details are as follows
Short text
    SQL error in the database when accessing a table.
How to correct the error
    Database error text........: "ORA-01555: snapshot too old: rollback segment
     number 21 with name "_SYSSMU21$" too small"
    Internal call code.........: "[RSQL/FTCH/VBRK ]"
    Please check the entries in the system log (Transaction SM21).
Thanks
Padmakar Kudtarkar
Edited by: Rob Burbank on May 19, 2011 9:38 AM

The query where we are getting error in Standard program AQ20FD==========A2============ for Job
EISSD/REQUISITION 14 / is as follows:
select VBRKBUKRS VBRKFKART VBRKFKDAT VBRKFKTYP VBRKGJAHR VBRKKUNAG VBRKKUNRG VBRKKURRF VBRKVBELN VBRKWAERK VBRP~AUBEL
       VBRPAUPOS VBRPFKIMG VBRPKVGR2 VBRPKZWI1 VBRPMATNR VBRPMWSBP VBRPNETWR VBRPPSTYV VBRPVBELN VBRPVGBEL VBRP~VGPOS
       VBRPVKBUR VBRPVKGRP VBRPVRKME VBRPWAVWR
into (VBRK-BUKRS , VBRK-FKART , VBRK-FKDAT , VBRK-FKTYP , VBRK-GJAHR , VBRK-KUNAG , VBRK-KUNRG , VBRK-KURRF , VBRK-VBELN
     , VBRK-WAERK , VBRP-AUBEL , VBRP-AUPOS , VBRP-FKIMG , VBRP-KVGR2 , VBRP-KZWI1 , VBRP-MATNR , VBRP-MWSBP , VBRP-NETWR
     , VBRP-PSTYV , VBRP-VBELN , VBRP-VGBEL , VBRP-VGPOS , VBRP-VKBUR , VBRP-VKGRP , VBRP-VRKME , VBRP-WAVWR )
from ( VBRK
       inner join VBRP
       on VBRPVBELN = VBRKVBELN )
       where VBRK~BUKRS in SP$00004
         and VBRK~FKDAT in SP$00001
         and VBRK~KUNAG in SP$00002
         and VBRK~VBELN in SP$00006
         and VBRP~MATNR in SP$00003.
%dbacc = %dbacc - 1.
if %dbacc = 0.
    stop.
endif.
check SP$00004.
check SP$00001.
check SP$00002.
check SP$00006.
check SP$00003.
add 1 to %count-VBRK.
%linr-VBRK = '01'.
extract %fg01.
%ext-VBRP01 = 'X'.
    extract %fgwrVBRP01.
endselect.

My Apple Macbook hard drive crashed and I had to replace. Now trying to reload CS5 and having issues. When I click download from Adobe download page, a screen pops up saying "Access Denied". I have serial number, but don't even get to a page to enter. Ple

My Apple Macbook hard drive crashed and I had to replace. Now trying to reload CS5 and having issues. When I click download from Adobe download page, a screen pops up saying "Access Denied". I have serial number, but don't even get to a page to enter. Please help…Thanks!!

Make sure you have cookies enabled and clear your cache. If it continues to fail try using a different browser.
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY . Looking for solution.

Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY . Looking for solution.

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash, if possible.
Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ 2>&- | wc -l | pbcopy
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
The Terminal window doesn't show the output. Please don't copy anything from there.

Account search F4 Help from BP Relationship page restricts the search

Hi ,
Account search F4 Help from BP Relationship page restricts the search to corporate accounts.
The business partner category maintained for the relationship type in Tcode buba is organization and person.But the search is restricted to corporate accounts only.
Thanks & Regards,
Sanila

Hi Shobhi,
Can you provide some more details about the system ?
Are you using transaction BP or CRM Web UI ? Also, which BBPCRM SP are you on ?
This problem does not exist in higer SPs of CRM, and a related problem existed in Web UI that the F4 search did not consider the role based customizing. This has been corrected in SAP note 1297760.
My guess is that everything is working fine in your system. Probably, you have also maintained some role based restrictions in BUBA customizing. Now, possibly, the allowed roles are only valid for corporate accounts, that's why you only see organizations in the search.
E.g : say u have a relationship category ZBUP03 - Employee rel
Now, you have a role restriction that partner 2 must be only role BUP003 = employee.
Now, according to role customizing, employee can only be person.
Thus, when you search for BP's to assign to rel category ZBUP03, you will only see persons.
Probably, this is the scenario in your system.
Hope this helps.
Cheers,
Rishu.

How do I set a new account as default in safari when I send emails from a web page

how do I set a new account as default in safari when I send emails from a web page
thanks in advance

In the Composing pane of Mail's preferences window, look for the pop-up menu labeled "Send new messages from." Select the desired account there.
Note, though, that this won't change the behavior when replying to a message... in that case, the reply will be sent from the account that received the message, unless you specify differently at that time.

Error when accessing Tuxedo Services from Weblogic

Hi,
I have a stateless session bean deployed on Weblogic 10.3.5 . I have a WTC Server configured to connect to my Tuxedo server.I have all the local and remote AP's set on this server also.
Now I am trying to access Tuxedo server from a method in my deployed EJB. Method looks like this
========================================================================================
Context ctx;
     TuxedoConnectionFactory tcf;
     TuxedoConnection myTux; // For now we get it via NEW until the Factory works
     TypedString myData;
     Reply myRtn;
     int status;
     System.out.println("getData called, converting " + toConvert);
     try {
     ctx = new InitialContext();
     tcf =
     (TuxedoConnectionFactory) ctx.lookup("TuxedoConnectionFactory");
     } catch (NamingException ne) {
     // Could not get the tuxedo object, throw TPENOENT
     throw new TPException(TPException.TPENOENT,
     "Could not get TuxedoConnectionFactory : " + ne);
     myTux = tcf.getTuxedoConnection();
     myData = new TypedString(toConvert);
     System.out.println("About to call tpcall");
     try {
     myRtn = myTux.tpcall("TOUPPER", myData, 0);
     } catch (TPReplyException tre) {
          System.out.println("tpcall threw TPReplyExcption " + tre);
     throw tre;
     } catch (TPException te) {
          System.out.println("tpcall threw TPException " + te);
     throw te;
     } catch (Exception ee) {
          System.out.println("tpcall threw exception: " + ee);
     throw new TPException(TPException.TPESYSTEM, "Exception: " + ee);
     System.out.println("tpcall successfull!");
     myData = (TypedString) myRtn.getReplyBuffer();
     myTux.tpterm(); // Closing the association with Tuxedo
========================================================================================
I get following error when i call the above method from my client for EJB.
========================================================================================
TPENOENT(6):0:0:TPED_MINVAL(0):QMNONE(0):0:Could not get TuxedoConnectionFactory : javax.naming.NameNotFoundException: Unable to resolve 'TuxedoConnectionFactory'. Resolved ''; remaining name 'TuxedoConnectionFactory'
     at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
     at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
     at sfsb3.ReplicableSFSB_6ri454_ReplicableSFSRemoteIntfImpl_1035_WLStub.getData(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
     at $Proxy0.getData(Unknown Source)
     at test.TestDemoClient.main(TestDemoClient.java:37)
========================================================================================
I need to resolve this quickly please.
Thanks for any help
Regards,
Awais

I'm not very familiar with Tuxedo unfortunately.
I recommend that you post here:
Could not get TuxedoConnectionFactory, setting up AP's incorrectly?
You could also start with the code here:
Where to Download weblogic.wtc.jatmi Library/Package
And follow the instructions here:
http://download.oracle.com/docs/cd/E21764_01/web.1111/e13756.pdf

401 Unauthorized Error when accessing a task from REST API which contains Role or Privilege in Access Control definition

Hi Team,
As of IDM 7.2 SP8 patch2, when we use Enterprise role or Privilege in the access control definition of a task, accessing this task from UI5 i.e REST API is giving unauthorized error even though user is already having the required role or privilege.
But the task is working fine if we use fixed user ID or keeping blank value in allowed users field.
Attached the current access control definition of the task we configured & the error message info for reference
Regards,
Venkata Bavirisetty

Hi Ralitsa,
Thanks for your response and sorry for late reply.
The XXXX in role is not used as a wild card. the name itself is in that format. I have searched the role and then selected from search list.
Let me know if you need any clarifications?
Refards,
Venkata Bavirisetty

"Unable to read file" error in Excel 2010 when downloading .xls file from IE11

We have lots of reports that have links for our users to be able to download report results in Excel format. We accomplish this by using the Excel mime type in our .asp pages. Sporadically, we are seeing "Unable to read file" errors in Excel 2010
after choosing Open from the IE11 save dialog. Choosing Save/Save As and the file will open just fine.
Also, we can sometimes cause the error to occur more frequently by switching windows during the time when the file is downloading.
If the file is opened directly from /Temporary Internet Files then it opens just fine.
Window 7 64-bit
Thanks in advance!

Hi,
I found you replied in a similar thread, did you try the workaround (Reset the IE) that provided there? Did you change a browser to test?
Then, I suggest we use Process Monitor to do further troubleshooting. Please collect all the actions of IE.exe and Excel.exe, and check the if there are some
error message/code during you open XLS file from IE 11.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Error in OHW Configuration when accessing OCS help from OCS Admin Page

Similar Messages

Maybe you are looking for