Error in opening PDF attachment sent using SO_DOCUMENT_SEND_API1

Hi all,
I am converting script to PDF using FM 'SX_OBJECT_CONVERT_OTF_PDF'. Using this table i am trying to send it as a attachment to mail id. I am able to send the attachment successfully, but not able to open the attachment.
It is giving error as 'Adobe Reader could not open file because it is either not supported file type or because the file has been damaged'.
I tried seaching on SDN, but did not get useful answer.
Can you please help me in resolving this error?
Thanks,
Archana

Good day Archana,
This is the same problem we have encountered, this has started after adding a patch.
After doing so much R & D we could not do it. We have written a mail to SAP and they
have instructed the basis consultant to follow certain procedure and finally the issue is
solved.
I suggest you to consult basis consultants.
Regards and Best wishes.

Similar Messages

Error while opening PDF attachment sent via mail

Hi,
I am attaching PDF file to PO in me22n and sending the same file as attachment in the mail to the vendor using class CL_BCS.
The mail is sent to the vendor successfully and they are able to successfully open the PDF attachment. But in some cases the mail is successfully received but while opening the attachment it is giving the error as file is corrupted.
Please help me to resolve this issue.
Thanks and regards,
Jayashree

Hi,
I would like to know what font type, you are using in the forms.
Ideally it should be HELVETICA .
If you are using any other font in your style/form,try changing it to HELVETICA & Test.
Also Check the OTF data at the call of gen. FM,before converting it to PDF.
Regds,
AS
Edited by: abheesawant on Oct 12, 2011 7:48 AM

Error while openeing PDF attachment sent thru smartform

Hi,
I have tried all the options and also gone thru all the quries and replies in SDN but could not find answer for this.
I have developed a smart from with some table fetch data from PAYR. Now i have written an ABAP code to sent the output of a smartform as PDF in the email.
Im getting an error "There was an error openeing htis doc and file is damaged and coul dnot be repaired".
Here is my code.
CLEAR WA_BUFFER.
LOOP AT I_TLINE.
TRANSLATE I_TLINE USING '~'.
CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
CLEAR: I_RECORD. REFRESH: I_RECORD.
DO.
I_RECORD = WA_BUFFER.
APPEND I_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
I_OBJBIN] = I_RECORD[.
I_OBJPACK-TRANSF_BIN = 'X'.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 1.
I_OBJPACK-BODY_START = 1.
DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
READ TABLE I_OBJBIN INDEX V_LINES_BIN.
I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
I_OBJPACK-DOC_SIZE = ( v_lines_bin - 1 ) * 255 + strlen( i_objbin ).
I_OBJPACK-BODY_NUM = V_LINES_BIN.
I_OBJPACK-DOC_TYPE = 'PDF'.
I_OBJPACK-OBJ_NAME = 'smart'.
I_OBJPACK-OBJ_DESCR = 'test'.
APPEND I_OBJPACK.
I_RECLIST-RECEIVER = 'ABC.gmail.com'.
I_RECLIST-REC_TYPE = 'U'.
APPEND I_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
Pls help me in sloving out this.
Thanks.

Sounds familiar but not sure. Have you tried using OTF format in stead of PDF and in the file name use document.pdf??

Error while Opening PDF attachment from Mail

Hi,
We two Output Types created ZNEU and ZAUF. Two Smartforms are created for the same Output Types. The Issue now is, When ZNEU triggers and send a mail the document is properly decoded and gets opened but for ZAUF it doesn't. It says File damaged.
This is the code we have used for sending mail.
CONSTANTS:
          co_pdf(3) TYPE c VALUE 'PDF',
          co_raw(3) TYPE c VALUE 'RAW'.
DATA:
        it_objbin TYPE STANDARD TABLE OF solisti1,
        wa_objbin TYPE solisti1.
DATA:
         lv_filesize TYPE i.
DATA:
        it_lines TYPE STANDARD TABLE OF tline.
DATA:
        wa_mail_body TYPE solisti1,
        wa_receipients TYPE somlreci1.
DATA:
       document           TYPE REF TO cl_document_bcs,
       content            TYPE solix_tab,
       wa_content         TYPE solix,
       send_request       TYPE REF TO cl_bcs,
       sender             TYPE REF TO if_sender_bcs,
       recipient          TYPE REF TO if_recipient_bcs,
       requested_status   TYPE REF TO bcs_rqst,
       status_mail        TYPE bcs_stml,
       bcs_exception      TYPE REF TO cx_bcs,
       lv_rec             TYPE adr6-smtp_addr.
DATA:
         wa_attachx TYPE solix,
         l_pdf_len TYPE i,
         l_con_len TYPE i,
         l_pdf_pos TYPE i,
         l_con_pos TYPE i.
FIELD-SYMBOLS: <fs_con> TYPE x.
CLASS cl_cam_address_bcs     DEFINITION LOAD.
CLASS cl_abap_char_utilities DEFINITION LOAD.
* Get the PDF version of the OTF
CALL FUNCTION 'CONVERT_OTF'
   EXPORTING
     format                      = 'PDF'
   IMPORTING
     bin_filesize                = lv_filesize
    TABLES
      otf                         = job_output_info-otfdata
      lines                       = it_lines
   EXCEPTIONS
     err_max_linewidth           = 1
     err_format                  = 2
     err_conv_not_possible       = 3
     err_bad_otf                 = 4
     OTHERS                      = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Convert the PDF format to the table type required for the attachment.
CALL FUNCTION 'QCE1_CONVERT'
    TABLES
      t_source_tab         = it_lines
      t_target_tab         = it_objbin
    EXCEPTIONS
      convert_not_possible = 1
      OTHERS               = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Convert the data which is in text to binary
l_con_pos = 0.
DESCRIBE FIELD wa_objbin LENGTH l_pdf_len IN BYTE MODE.
DESCRIBE FIELD wa_attachx LENGTH l_con_len IN BYTE MODE.
LOOP AT it_objbin INTO wa_objbin.
    ASSIGN wa_objbin TO <fs_con> CASTING.
    CHECK sy-subrc EQ 0.
    DO l_pdf_len TIMES.
      l_pdf_pos = sy-index - 1.
      IF l_con_pos = l_con_len.
        APPEND wa_attachx TO content.
        FREE wa_attachx.
        l_con_pos = 0.
      ENDIF.
      MOVE <fs_con>+l_pdf_pos(1) TO wa_attachx-line+l_con_pos(1).
      ADD 1 TO l_con_pos.
    ENDDO.
ENDLOOP.
IF l_con_pos > 0.
    APPEND wa_attachx TO content.
ENDIF.
TRY .
*     -------- create persistent send request ------------------------
      send_request = cl_bcs=>create_persistent( ).
*     -------- create and set document with attachment ---------------
*     create document from internal table with text
      document = cl_document_bcs=>create_document(
                    i_type    = 'RAW'
                    i_text    = mail_body_tab
                    i_subject = email_subject ).
*     add attachment to document
      CALL METHOD document->add_attachment
        EXPORTING
          i_attachment_type    = 'PDF'
          i_attachment_subject = attachment_name
          i_att_content_hex    = content.
*     add document to send request
      CALL METHOD send_request->set_document( document ).
*    Set sender
      sender = cl_cam_address_bcs=>create_internet_address( sender_id ).
      CALL METHOD send_request->set_sender
        EXPORTING
          i_sender = sender.
*     Receipients
      LOOP AT receipients_tab INTO wa_receipients .
        lv_rec = wa_receipients-receiver.
        recipient = cl_cam_address_bcs=>create_internet_address( lv_rec ).
*       Add recipient with its respective attributes to send request
        CALL METHOD send_request->add_recipient
          EXPORTING
            i_recipient = recipient.
      ENDLOOP.
* Set that you don't need a Return Status E-mail
      status_mail = 'N'.
      CALL METHOD send_request->set_status_attributes
        EXPORTING
          i_requested_status = 'N'
          i_status_mail      = status_mail.
* set send immediately flag
      send_request->set_send_immediately( 'X' ).
* Send document
      CALL METHOD send_request->send( ).
*      COMMIT WORK.
    CATCH cx_bcs INTO bcs_exception.
      RAISE EXCEPTION bcs_exception.
ENDTRY.
This is in a Class which is been used in the print program for both the Output Types.
Can somebody throw light upon this.
Note: I tried using
but it is not working properly.
Thanks,
Prashanth
Edited by: Prashanth KR on Jan 5, 2010 6:20 AM

Hi,
Please paste the part of code where you are getting error.
And if you are not clear about where the error is, try searching sdn or google with the error message that you are getting as this issue has been discussed many times earlier.
Check this link.
Error while opening PDF in mail attachment
Hope it helps.
Regards,
Raj

How To Open PDF Attached file use CLIENT_HOST 11 g forms

How to open pdf file on client side at 11 g forms ?
when i open any attached (PDF )file on client side is not open those file open on server side plz guide me how to open those file on client machine using client host?
thanks

Where is the pdf you are trying to open? Is it on the server or the client? If the file is stored on the server then you can access it using WEB.SHOW_DOCUMENT assuming it is stored in a place that has a virtual mapping. For example:
WEB.SHOW_DOCUMENT ('http://server/someLocation/file.pdf','_blank');If the file is on the client then you need to configure your application to use WebUtil. Then you can do what Francois suggested.

I cannot open PDF filkes sent via email. I used too. nHow do I fix.

Cannot open PDF files sent via email. The open via Word in encripted jinerish. This has not happend until now.
Ciro

I had the same problem. My version of RoboHelp is pretty old (x5) and the problem was with pdfs made up in version 9. Some pdfs would open and some would not. It depended on the version used to make the pdf. Got error messages and corrupted file messages.
I solved the problem by using the full version of Acrobat and using the pdf Optimizer to make compatible with version 5( just to make sure).
Another option is to "print" to the pdf printer when the file is open.
Both then can be imported into RoboHelp without a problem
Hope this helps. It ruined many days at work for me while I tried to figure out what on earth I was going to do.
Holly

Error opening PDF attachment (via email)

Hello,
I've problems to send a PDF file with the function:
'SO_DOCUMENT_SEND_API1'
At first a small overview of my process:
- 'SCMS_DOC_READ'                 -> to read the file from the archive
- 'SCMS_BINARY_TO_FTEXT'     -> to convert from bin. to pdf
- 'SO_DOCUMENT_SEND_API1' -> to send the email
My pdf result:
% P D F - 1 . 4 % â ã Ï Ó 1   0   o b j < < / T y p e
Project scope:
%PDF-1.4%âãÏÓ1 0 obj<</Type
As a result, by opening the PDF file an error occured.
Further information:
objpack-transf_bin = 'X'.
call function 'SO_DOCUMENT_SEND_API1'
    exporting
      document_data              = doc_data
      put_in_outbox              = ''
      commit_work                = 'X'
    tables
      packing_list               = objpack
      object_header              = objhead
      contents_bin               = data          <- PDF content
      contents_txt               = objtxt
      receivers                  = reclist
    exceptions

most possible reason has been discussed in:
Error in opening PDF attachment

Can't open PDF attachment in e-mail sent from Outlook, says I need to save first, how?

Cannot open PDF attachment in webmail sent from Outlook, says I need to save first; how do I save the link?

Looks like another user asked similar question with over 600 views and no replies ... hmmm. When I click on the attachment, it says I must save it to my disk; with one button mouse just click once and save? I've tried dragging and saving the attachment to word doc but opened up with a page of garbled words/symbols,etc. Any ideas are welcome.

Cannot open pdf attachment in my e-mail

Cannot open pdf attachment in my e-mail I can open pdf files on the hard drive
I am using Windows Internet Explorer 9, Microsoft Vista
When I receive an e-mail with a pdf attachment a box pops up
What do you want to do with
get attachment __ aspx ? file =
size: 3.11 kb
from: blu166.mail.live.com
open
the file won't be saved automatically
save
save as
cancel
Your help will be appreciated

Hi Pat
Microsoft upgraded Hotmail e-mail accounts to Outlook.com
The Print Screen key has no function.....when the 2 boxes mentioned above appear on the monitor (which I have detailed) they require action or I cannot proceed to another screen or function.
Maybe my problem should also be sent to Microsoft Customer Service...your thoughts.
I note there has been 106 views hard to believe that no one else has had this problem.
Appreciate your time

'Failed to create object' when trying to open PDF attachment in Dynamics GP 10 OLE notes

Microsoft Dynamics GP 10 users who updated to Adobe Reader X are getting errors when trying to open or create an OLE attachment on a note.
They get 'Failed to create object' when trying to open an existing and getting 'Failed to connect.
And " Link may be broken" when trying to create a new one.
PDF attachments work pretty fine with previous version of Acrobat reader 7,8,9 up tp 9.4
Now that we install Acrobat X, something has changed.
It only does this for PDF attachments, Other file types work fine.
I was able to remove Adobe Reader X and install a prior version to work around the issue.
Has Adobe developed any Fix for the integration of X and OLE objects.
regards,

Hi Gestis,
What version of Adobe Reader are you using?
If its less that 10.1.2, please update it to 10.1.2 and then try to open PDF attachment inDynamcs GP OLE notes.

Problem while opening PDF attachment in Inbox

Hi all,
I am sending PDF attachment through email to inbox.
When am trying to open PDF attachment i am getting error-
'There was an eror opening this document.The fuile changed and couldnt be open'
When i click on attachment some bytes are getting transfere essage is displayed in lower toolbar.
Please guide to resolve this problem.

No reply.

After Downloading, Error while opening PDF : PDF has no pages

After Downloading, Error while opening PDF : PDF has no pages
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
      SRC_SPOOLID              = L_SPOOLNO
      NO_DIALOG                = SPACE
      DST_DEVICE               = MSTR_PRINT_PARMS-PDEST
    IMPORTING
      PDF_BYTECOUNT            = MI_BYTECOUNT
    TABLES
      PDF                      = MTAB_PDF
    EXCEPTIONS
      ERR_NO_ABAP_SPOOLJOB     = 1
      ERR_NO_SPOOLJOB          = 2
      ERR_NO_PERMISSION        = 3
      ERR_CONV_NOT_POSSIBLE    = 4
      ERR_BAD_DESTDEVICE       = 5
      USER_CANCELLED           = 6
      ERR_SPOOLERROR           = 7
      ERR_TEMSEERROR           = 8
      ERR_BTCJOB_OPEN_FAILED   = 9
Thanks in advance
Monika
      ERR_BTCJOB_SUBMIT_FAILED = 10
      ERR_BTCJOB_CLOSE_FAILED = 11
      OTHERS                   = 12.
Transfer the 132-long strings to 255-long strings
LOOP AT MTAB_PDF.
TRANSLATE MTAB_PDF USING '~'.
CONCATENATE WA_BUFFER MTAB_PDF INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
it_attach = WA_BUFFER.
APPEND it_attach.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
****GET THE FILE NAME TO STORE....................
v_path = 'C:\PD Form\' .
CONCATENATE v_path p_pernr-low '.pdf' into v_name.
    create object v_guiobj.
    call method v_guiobj->file_save_dialog
      EXPORTING
        default_extension = 'pdf'
        default_file_name = v_name
        file_filter       = v_filter
      CHANGING
        filename          = v_name
        path              = v_path
        fullpath          = v_fullpath
        user_action       = v_uact.
    if v_uact = v_guiobj->action_cancel.
      leave to current transaction.
    endif.
..................................DOWNLOAD AS FILE....................
    move v_fullpath to v_filename.
    call function 'GUI_DOWNLOAD'
      EXPORTING
        bin_filesize            = MI_BYTECOUNT
        filename                = v_filename
        filetype                = 'BIN'
      TABLES
        data_tab                = it_ATTACH
      EXCEPTIONS
        file_write_error        = 1
        no_batch                = 2
        gui_refuse_filetransfer = 3
        invalid_type            = 4
        no_authority            = 5
        unknown_error           = 6
        header_not_allowed      = 7
        separator_not_allowed   = 8
        filesize_not_allowed    = 9
        header_too_long         = 10
        dp_error_create         = 11
        dp_error_send           = 12
        dp_error_write          = 13
        unknown_dp_error        = 14
        access_denied           = 15
        dp_out_of_memory        = 16
        disk_full               = 17
        dp_timeout              = 18
        file_not_found          = 19
        dataprovider_exception = 20
        control_flush_error     = 21
        others                  = 22.
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
          with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.

My Generated Spool request is PDF Spool. It contains Adobe Forms data. To Download Adobe form
             Spool (PDF Spool) into PDF format,
First,
A)     Read PDF Spool data by using u2018FPCOMP_CREATE_PDF_FROM_SPOOLu2019 Function module.
B)     Assign the Output Data to XSTRING format
C)     Convert that XSTRING data to Binary Format using 'SCMS_XSTRING_TO_BINARY' Function module.
D)     Save File on Application server using OPEN DATASET , TRANSFER , CLOSE DATASET.You can see your
                      downloaded file in Transaction AL11 in specified directory.
You can save your file on Presentation server also using GUI_DOWNLOAD.
First three steps are necessary if your spool is PDF Spool.
Basically we need this when we are downloading Adodbe forms ( which is not a SAPScript or smartforms)
Example :
DATA :
e_pdf1 TYPE fpcontent,
e_renderpagecount1 TYPE i.
CALL FUNCTION 'FPCOMP_CREATE_PDF_FROM_SPOOL'
    EXPORTING
      i_spoolid               = l_spoolno
      i_partnum               = '1'
   IMPORTING
     e_pdf                   = e_pdf1
     e_renderpagecount       = e_renderpagecount1
*   E_PDF_FILE              = E_PDF_FILE1
* EXCEPTIONS
*   ADS_ERROR               = 1
*   USAGE_ERROR             = 2
*   SYSTEM_ERROR            = 3
*   INTERNAL_ERROR          = 4
*   OTHERS                  = 5
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DATA : buffer TYPE xstring,
append_to_table TYPE c.
DATA : output_length TYPE i.
TYPES : BEGIN OF ty_binary,
            binary_field(1000) TYPE c,
          END OF ty_binary.
DATA : lt_binary TYPE TABLE OF ty_binary WITH HEADER LINE.
DATA : lv_xstring TYPE xstring.
lv_xstring = e_pdf1.
* Convert xstring to binary.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
      buffer                = lv_xstring
     append_to_table       = ' '
* IMPORTING
*   OUTPUT_LENGTH         =
    TABLES
      binary_tab            = lt_binary.
DATA : wa_binary LIKE lt_binary.
DATA: BEGIN OF itab OCCURS 0,
field(256),
END OF itab.
DATA: dsn(50000) VALUE '/usr/sap/tmp/',
length LIKE sy-tabix,
lengthn LIKE sy-tabix.
CONCATENATE '/usr/sap/tmp/' lv_pernr '.pdf' INTO dsn.
******* Save file on Application server
OPEN DATASET dsn FOR OUTPUT IN BINARY MODE.
LOOP AT lt_binary.
    TRANSFER lt_binary-binary_field TO dsn.
ENDLOOP.
CLOSE DATASET dsn.
CLEAR lt_binary.
REFRESH lt_binary.
cheers

Adobe Reader Error in Opening PDF Form

Why do I get this error message when I try to open PDF Application Form using Adobe Reader?
"Error encountered while processing node xfa[0].form[0].form1[0].#subform[5].ApplicationEligibility[0]. Unable to find suitable font for Japanese encoding."

Hi Deepak - I am a different user with the same problem as the guy above. I created a form in LiveCycle and when users open it in Reader it gives the error:
"Error encountered while processing node xfa[0].form[0].form1[0].#subform[0].#draw[2]. Unable to find suitable font for Japanese encoding."
Before I try to recreate the form from scratch, do you know how to fix this? For the record, the form was NOT built using any Japanese fonts.
Thanks,
Michael

Outlook2013 email message goes behind main Outlook window when opening PDF attachment with Reader 11

Problem statement: Outlook 2013 email message goes behind main Outlook window when opening PDF attachment with Adobe Reader 11.0.3
Environment: Windows 8 x64; Office 2013; Adobe Reader 11.0.3
Steps to reproduce bug:
1. Open Outlook 2013
2. Open email message with PDF attachment
3. Open PDF attachment (with Adobe Reader as default PDF viewer)
4. Close Adobe Reader
Results: Original email message with PDF attacment now sits behind the main Outlook window
Expected results: Original email message should be on top of main Outlook window as it was when opening the PDF attachment
Note: Adobe Acrobat Profession performs as expected - the original email is on top of the main Outlook window - This only seems to be a problem with Adobe Reader.
Has anyone else experience this problem? If so, have you found a work-around?
Thanks,
Mike

From: new window opens behind existing window - how to modify?
I had this problem happening in Outlook.
If I tried to open an email, it would open behind the main Outlook window.
The same happened if I opened a link in the email - it would open behind the mail.
The fix that was suggested to me was so simple that I still don't believe it.
Right click on the task bar and unlock the taskbar, then lock it again.
Close down Outlook and re-start it.
Problem solved! Just dont know how or why.
Proposed as answer byalfreelandTuesday, January 08, 2013 4:52 PM
It worked for me with Win 7 and OL 2003. Why? Who cares ... It is working.
Liviu 2014-09-17

Why can't I open pdf documents after using Adobe Reader security?

I have been able to open pdfs perfectly well up until I changed the security settings on Adobe Reader. As I read somewhere that Apples have an inbuilt pdf reader I trashed everything Adobe, but still can't open pdfs. Tried using Preview to no avail.
Is there some other way of opening pdfs without reinstalling Adobe?

You didn't think of mentioning that in your first post? So it's not Adobe Reader or Preview you are having problems with. It's pdf's in your browser!
For Safari, you need to remove the adobe pdf plugins which Adobe apparently screwed up. You need to remove:
/Library/Internet Plug-Ins/AdobePDFViewer.plugin
/Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
I think you can "get away with" removing just the second one. But both for sure should allow you to open pdf's in a browser (all browsers).

Error in opening PDF attachment sent using SO_DOCUMENT_SEND_API1

Similar Messages

Maybe you are looking for