Error in operation mapping

I have been receiving an error when I try to test the operation mapping, regarding the attribute "schemaLocation".
This error occurs after importing an xsd file which name contains character "." (dot). No error message if I substitute the
character "." by "_" (underscore). Removing the attribute "schemaLocation" from the xsd file and keeping the "." within the xsd name file, no error occurs launching the test.
Any help will be well appreciated.
Many thanks in advance for your kind support.
Regards,
Giovanni

Hi
Refresh CPA cache using user PIDIRUSER.
Look Note 951318 for Mapping Cache Refresh.

Similar Messages

Error in Operation Mapping for Idoc to File Scenario

Hi Experts,
I am doing Idoc to File Scenario for Timesheet IDoc "HRSM_C" and following step are through,
Sender agreement --> Receiver Determination --> Interface Determination
got stuck in Operation mapping, it sahows error
"Unable to find resource 193c0e01-bd37-11dd-850c-d879ac131b1f in the following software component versions: http://clarityPOCcom/sap/xi/tf/_MM_Timesheets_iDocToFile_.class-1"
Also not all the fields of IDoc HRSM_C are transferred to the XI server as I am unable to see all the fields in xml file using transaction idx5, as I suppose the reason behind may be there are no values in those fields.
Please suggest how to resove the issue and transfer all the fields from R3 to XI in Idoc eventhough it doesn't contain any value.

Hi
Refresh CPA cache using user PIDIRUSER.
Look Note 951318 for Mapping Cache Refresh.

Error while executing operation mapping

Hi All,
I am getting the below the error , while executing the Operation mapping, whereas the same payload
working fine with message mapping. Please suggest.

Hi Chandra,
Please refer to mark's comment provided in below thread:
Unable to display tree view
Regards,
Akshay

Error in Automated activity of BPM using the PI operation mapping.

Dear Experts,
We have a BPM process, where we have imported Operation Mapping, to use it in an automated activity. We have created the service reference with localhost and checked the local provider system check box and with type WS.
While running the scenario the process stops at the automated activity (having the Operation mapping), with error:
A technical error during invocation: Could not invoke service reference name
I have tried to recreate the step couple of times but it is always the same error.
Could you please share your expertise in how to over come the error.
Thank you,
Best Regards,
Ajay

Hi Ganesh,
Thanks for your response.
SOAP and Mail scenario are also using the same inbound proxy structure , and the proxy is working fine in both cases.
For FTP scenario we are reusing the same inbound proxy but we are facing error .
SAP is getting
"XML to ABAP Conversion error with error id as "CX_ST_MATCH_ELEMENT " System expected the element 'Namespace of the inbound service interface' .
Please guide.
Thanks,
Ruchi

Linkage Error in Mapping and Operation mapping testing for Synchronous in NWDS

Dear Experts,
Hope you all are doing fine..
I am working in a synchronous scenario Proxy via SAP PI 7.4 to JAVA Application supporting JSON.I wrote JAVA program to convert JSON to XML and while performing test for the JAVA mapping in response structure at Operation Mapping,I am receiving following error..
LinkageError at JavaMapping.load(): Could not load class: json2xml/bin/pack/EsrJson2Xml
java.lang.NoClassDefFoundError: json2xml/bin/pack/EsrJson2Xml (wrong name: pack/EsrJson2Xml) at
java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClassCond(ClassLoader.java:735)
at java.lang.ClassLoader.defineClass(ClassLoader.java:716) at java.lang.ClassLoader.defineClass(ClassLoader.java:537)
at com.sap.aii.ib.server.mapping.execution.MappingLoader.findClass(MappingLoader.java:195)
at java.lang.ClassLoader.loadClass(ClassLoader.java:372) at java.lang.ClassLoader.loadClass(ClassLoader.java:313)
I followed some of discussions for the Linkagae error http://scn.sap.com/thread/1418477 but could not help..
Following are details of my NWDS and PI server:
SAP NetWeaver Developer Studio
SAP Enhancement Package 1 for SAP NetWeaver Developer Studio 7.3 SP10 PAT0000
Compiled the project with JAVA SE-1.6 as well as 1.5
SAP PO 7.4 Java Only , Release: NW731CORE_10_REL
SP: 05 JDK: jdk16 Latest Change: 353688
I have taken care to export all the Jar files used in NWDS to be exported and then imported as Archived files in PI server.
But could not see the 5 jar files in ESR. I hope there is some issue with name as can see in the log.Can the issue be solved?
How to test the Operation mapping for Synchronous Message in NWDS?
Regards
Rebecca

Dear Hareesh and Experts,
I resolved the issue by doing the below steps.
1. Downloaded the JDK5 and updated the Java console i.e. JRE 15.
2. I had created this project using the JAVA Compiler with JAVA SE1.6 initially. Changed this to 1.5 in the Properties of the Project.
3. Uploaded the project again in ESR Imported Archive.
The issue is solved.
Thanks a lot for all your inputs.

Operation Mapping Error

Hi Gurus,
Anyone familiar with the error below? this occur during the test configuration in integration builder (integration directory)
"Operation Mapping
OM_DESADV_DELVRY03_ZDELVR0X_TO_ED_InterfaceToConex
Runtime error
Runtime exception occurred during application mapping com/sap/xi/tf/_MM_DESADV_DELVRY03_ZDELVR0X_TO_ED_~; com.sap.aii.utilxi.misc.api.BaseRuntimeException:The processing instruction target matching "[xX][mM][lL]" is not allowed."
Thanks

Hi,
Quoting XML Bible:
The first line is the XML declaration:
<?xml version=u201D1.0u201D standalone=u201Dyesu201D?>
This is an example of an XML processing instruction. Processing instructions begin
with <? And end with ?>. The first word after the <? is the name of the processing
instruction, which is xml in this example.
So that means, in your Operation Mapping, you are using "xXmMlL" which is not a processing instruction that is known e.g XSLT, CSS, HTML or XML
Hope this helps,
Mark

Operation Mapping Error while testing Configuration in ID

Hi Experts,
We are configuring a B2B interface using RNIF adapter to XI adapter. The RNIF adapter is the Sender adapter , which send data using XML format. XI adapter is the Receiver adapter for ECC. Message Mapping and Operation Mapping tests in ESR are running without any errors. But while testing Configuration Test in ID, we are getting the following error:
Interface Determination
| PIPP21_V020201_Seller | eInvoice_seller_RNIF | | PIPP21_V020201_Buyer
Sender
Communication Party
Communication Component
PIPP21_V020201_Seller
Outbound Interface
eInvoice_seller_RNIF
Namespace
http://ongc.co.in/xi/RosettaNet/PIPP21_V020201
Receiver
Communication Party
Communication Component
PIPP21_V020201_Buyer
RuntimeException during appliction Java mapping com/sap/xi/tf/_MM_SLB_XSD2AProxy_ Thrown: com.sap.aii.utilxi.misc.api.BaseRuntimeException: The processing instruction target matching "[xX][mM][lL]" is not allowed. at com.sap.aii.mappingtool.tf7.Transformer.checkParserException(Transformer.java:172) at com.sap.aii.mappingtool.tf7.Transformer.start(Transformer.java:141)
please do needful
Thanks
Laxman

Hi,
this means that you didn't copy the message correctly to the test tab in ID
try doing it once more - if it worked in ESR it has to work in ID in the same operation mapping
so it has to be a copy&paste error
Regards,
Michal Krawczyk

Operation Mapping issue in PI 7.1

Hi there,
I am working on PI 7.1 sp7, and have lots of interfaces running on it.
There is something strange regarding Operation Mapping in Interface Determination, the thing is that when i try to assign a IM to the Interface Determination i could see it from the display table BUT i am not able to get it to the I.Det screen, so the mapping between sender and receiver interface is lost.
However, if i import any scenario from other XI system and navigate to the IDet, i could see the operation mapping with the IM in it.
Do you guys have ever experienced something similar? Could this be something related to caches?
FYI:
Cache notif in ESR and ID is ok (green)
SXI_CACHE is ok
CPACache is ok
Cache connectivity test is in yellow status ("Cache notification from Integration Directory not yet started or being edited")
INTEGRATION_DIRECTORY_HMI destination test throws 500 error but the response body is 'The WebApplicationException log ID is [26D8F0DDA80400560000015D000DA0E801028B1CD8907B66].
and i think it should be ReqID not found.
Could you please help me on this?
Thanks in advance and best regards,
David

Hi David
I think this error is documented in note #1286212 Binding rec0 is not found in the brick error in mapping.
The solution is as following:
(http://<server>:<port>/rep)
-> Administration.
-> Repository (tab)
-> Java Web Start Administration
-> Re-initialization
Repeat this action on the Directory tab.
Regards
Mark

Runtime error in message mapping.

Hi experts.
My scenario is File --> PI --> File.
During the message mapping there are a few RFC lockups.
I have configured an communication component for the RFC destination, and a Receiver communication channel to the RFC system.
When I am trying to check the message mapping and the operation mapping from the integration builder every thing works just fine.
In the interface determination i have configured the rfc parameter for the mapping.
When I am trying to run the hole process i receive an error saying:"Runtime exception from: java.lang.nullPointerException:
null at com.sap.guid.GUID.parsHEXguid(guid.java:1015)
reguars Max

Hi.
As i have already said when I am trying to test the same operation mapping directly in the integration builder with the same message, it passes the mapping without any exceptions.
I think the catch may be in the fact that there are a few rfc calls inside the graphical mapping.
Any suggestions?
Regards Max.

How to avoid Linkage Error in JAVA Mapping

Dear Experts,
I am trying to test the JAVA mapping compiled in NWDS but receiving the error
"LinkageError at JavaMapping.load(): Could not load class".
java.lang.NoClassDefFoundError: JSONXMLProject/bin/com/sap/json/ConvJson2Xml (wrong name: com/sap/json/ConvJson2Xml)
at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClassCond(ClassLoader.java:735)
at java.lang.ClassLoader.defineClass(ClassLoader.java:716) at java.lang.ClassLoader.defineClass(ClassLoader.java:537)
at com.sap.aii.ib.server.mapping.execution.MappingLoader.findClass(MappingLoader.java:195)
Following are the details:
SAP PO 7.4
SP Stack Number 05
JDK Version jdk16
NWDS
SAP Enhancement Package 1 for SAP NetWeaver Developer Studio 7.3 SP10 PAT0000
1.Created the Project , Package and then class (Included the logic)
2. Included 1 JSON Jar file into my project and the Added to build path.
3.Exported the project as Archive File and saved in desktop
4.Imported into SAP PO system as Imported Archive
5.Could not observe the JSON jar file which i used as referenced JAR in NWDS
6.Tested in OM after referencing the JAVA class and found the above error.
I have JDK 5, 6 and 7 present in my local desktop and I am trying to export the compiled code using both JAVA SE 1.6 and 1.5 in NWDS seperatly after going several discussions.
Can any one hep me with the screenshots and tell me how to include all the reference jar files in exported project..
Regards..

Dear Anand,
I did exactly as you shared. As the JSON jar has number of classes, then in OM all the Classes had to be assigned. Then the linkage error went.
But in execution , it shows a new error that all the classes of the JSON jar has to be implemented with interface StremTransformation or AbstractTransformation.
I assume in the Operation Mapping I will use only 1 class as JAVA Class. Anyway I am attaching the document with navigation.
Do we have any other alternative??
Please rename the extension of the document by remove .txt
Regards

Basic Settings in Operation Mapping

Hi Experts,
I am working on SAP PI7.1 and have some doubts regarding the options available in Operation mapping.
We need to use SAP XML Toolkit option for older versions of XSLT mappings, while for the newer versions we need not use the option. The newer version of XSLT is based on JDK 5. Now my question is how to make the XSLT mapping compatible to JDK 5? What is the procedure/ tool to be used?
I have already referred:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/8c/447891e999478f8a4394ab566bc343/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/EN/73/f61eea1741453eb8f794e150067930/content.htm
And also some of the replies by Stefan Grube on SDN for similar questions, but still unable to know how to make XSLT compatible to JDK 5
Thanks.

Hi,
If in it case it throws some error, you may post here. I believe that such compatibility procedure won't be required all the time.
As per the guidelines older versions of XSLT mapping wont work without the mentioned option being checked.
Post PI7.1 and PI7.1 EHP1, all the XSLT mappings should be compatible with JDK5 and none of the earlier XSLT versions will work then.
So as of now we can make the Mappings work by selecting the SAP XML Toolkit option but the future versions wont have this option.
Thanks.

PI 7.1 - Operation Mapping stays blank after applying a value

Hello,
I am trying to recreate an interface that I had in XI 3.0 in my development PI 7.1 system. But every time I try to add an Operation Mapping (Interface Mapping in XI 3.0) it shows me a "value list" I select the correct mapping and then hit accept. But the operation mapping does not appear and there is no error message telling me anything.
I'm having a look at installing patch 1307777 but I'm not too confident that is the issue because although one of my mappings is a split mapping the others are not.
Any ideas?
Thanks,
Matt

Hello Matt,
I was facing the same problem. I can sugest you temporary suggestion, Like goto Interface determination - > From where you select the OM just right click on the square then select Input Help -> value list from there it will show the selected OM and you can see that in column.
PLease verify and let me know if this works or not.
Edited by: Siddhesh Pathak on Apr 13, 2009 4:45 PM

PO7.31 and BPM: Using Operation Mapping within BPM

Hello everyone!
I am facing an issue while trying the import/execute an Operation Mapping within a BPM. Have a PO 7.31SP07 installation (NWDS also on 7.31 SP07), and the process already have some working interface calls to PI, however still having issue while trying to execute the Operation Mapping:
1. After deploying the process, going to NWA -> SOA tab -> Application and Scenario Communication -> Application Communication -> select the process -> check the "localhost"/WS group for "Local System". The "Processing State" shows the error below:
Configuration for service group [localhost] failed. Error details:
[No endpoints found. Check if the service is configured and if its
endpoints are available in the . Service:
[{http://fusionconsultoria.com.br/sales_order_create}fusionconsultoria_salesord_om_SalesOrderSplit_ServicePortType]
Assigned Provider: [Local System]
Service Group: [localhost]
Service Group application: [fusionconsultoria/salesord]
Service Reference application: [fusionconsultoria/salesord]
2. During runtime, when trying to execute the OM automated step, on log viewer:
Error during SCA Processing
[EXCEPTION]
com.sap.engine.interfaces.sca.config.exception.ESBConfigurationException:
Could not process message for operation om_SalesOrderSplit_Service in
web service plugin module.
at com.sap.engine.services.sca.plugins.ws.WebServiceImplementationInstance.accept(WebServiceImplementationInstance.java:223)
at com.sap.engine.services.sca.das.SCADASImpl.invokeReference(SCADASImpl.java:314)
Caused by: com.sap.esi.esp.lib.mm.config.exceptions.ObjectNotExistsException:
Configuration not found for application:
fusionconsultoria/salesord,serviceRefId:{http://www.sap.com}salesord_fusionconsultoria~salesord~BPMcomponent_29768b4e-f59a-4ba3-a2ff-dee594b01ecf_WS.
Please check the configuration details from the NWA. You may have not
assigned the Service Group to a Provider System, or the generation of
the configuration has failed.
3. Carried out the steps from the referenced links below. They are quite similar to each other, however still facing the issue:
Reuse PI Operation Mapping as a service in SAP NetWeaver BPM
Using Operation Mappings (PI) in a BPM Process - Process Orchestration - SAP Library
Using NetWeaver PI’s Mapping in NetWeaver BPM
- Marked as "local provider" and WS;
4. Tried deleting, creating the automated step aswell reimporting the Operation Mapping.
5. Already reviewed the input/output mapping of the automated activity;
6. On ESR, the mapping works correctly.
7. Tried changing the outbound and inbound Service interfaces for the OM from stateless to stateless XI3.0, as well from synchronous to asynchronous.
At this moment I've completely ran out of ideas. Appreciate if anyone could give any insights, since I am running out of time with this project!
Thanks in advance to all and
Best regards,
Lucas Santos

Hi Lucus
I'm facing the same type of problem.
Why would re-creating the BPM fix this issue ?.    I fear I would spend all this effort for nothing.
What does your operation mapping wsdl:service > soap:address look like ?   What does your NWA BPM application Communication Configuration look like now - before you had that red light - like I have now.
The WSDL that is generated from the imported Operation Mapping : what end point is expected here. My wsdl:service > soap:address location has a port of 50500 - which does not even exist!. How can it work Does this get automatically deployed onto the Service Registry?.
I have built and deployed this but I get a run time error when it executes the operation mapping.   A technical error during invocation: Could not invoke service reference name.
I have seen in the deployed BPM's Application Configuration against the Consumed Service Groups an error against the associated service group
Configuration for service
group [SG_localhost] failed. Error details: [No endpoints found. Check if the service is configured and if its endpoints are available in the . Service
It almost seems that it wants me to publish the end point on the service registry - no idea how....but I none of the blogs and post indicate that I need to fiddle with this at all.
I have this question in SDN too if you care to take a look.

Error loading operating system (windows 7)

Macbook pro 8,2 (early 2011)
Samsung SSD 850 evo primary drive
OWC electra 3G secondary drive in place of the original DVD drive (with disk doubler).
My original HDD was removed for the two SSD configuration.
It contains two partition (OS X and Win 7 pro) and everything works fine.
I use Winclone to clone Win 7 partition to the new OWC drive.
My OS X partition was placed on the primary Samsung drive.
OS X works fine.
Win 7 works fine when i use Parallels Desktop (virtualization).
But when i try to boot with Win 7, i have the " error loading operating system" black screen.
I cannot repair Win 7 with the installation disc because when i try to boot with the DVD, i have à black screen with a white cursor and nothing happend. (original DVD drive is used in usb, inside a dedicated external cradle).
Here are some of terminal commands :
Last login: Sat Feb 14 17:26:06 on console
MacBook-Pro-de-Guillaume:~ Home$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Mac                     499.2 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *120.0 GB   disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:       Microsoft Basic Data Windows 7               119.8 GB   disk1s2
MacBook-Pro-de-Guillaume:~ Home$ sudo gpt -vv -r show /dev/disk1
Password:
gpt show: /dev/disk1: mediasize=120034123776; sectorsize=512; blocks=234441648
gpt show: /dev/disk1: PMBR at sector 0
gpt show: /dev/disk1: Pri GPT at sector 1
gpt show: /dev/disk1: Sec GPT at sector 234441647
      start       size index contents
          0          1         PMBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640       2008
     411648 234029056      2 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
234440704        911
234441615         32         Sec GPT table
234441647          1         Sec GPT header
MacBook-Pro-de-Guillaume:~ Home$ sudo fdisk /dev/disk1
Disk: /dev/disk1 geometry: 14593/255/63 [234441648 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 - 234441647] <Unknown ID>
2: 00    0   0   0 -    0   0   0 [         0 -          0] unused
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused
MacBook-Pro-de-Guillaume:~ Home$ sudo gpt -vv -r show /dev/disk1
gpt show: /dev/disk1: mediasize=120034123776; sectorsize=512; blocks=234441648
gpt show: /dev/disk1: PMBR at sector 0
gpt show: /dev/disk1: Pri GPT at sector 1
gpt show: /dev/disk1: Sec GPT at sector 234441647
      start       size index contents
          0          1         PMBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640       2008
     411648 234029056      2 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
234440704        911
234441615         32         Sec GPT table
234441647          1         Sec GPT header
MacBook-Pro-de-Guillaume:~ Home$
Thank you for your help !

You are creating a new protective MBR, not a Hybrid MBR. A protective MBR encapsulates the disk into a single entry the size of the disk so legacy partitioning tools leave it untouched to 'protect' the GPT.
In your case, since disk1 has only two partitions, GPT1 and GPT2, you should have two entries.
Here is an example, where GPT3, 4 and 5 are hybridized.
Rebuild MBR to match the new GPT information thus resetting the Hybrid MBR.
Use defaults for other questions (for example Enter an MBR hex code (default AF): AF).
Sudo gdisk /dev/disk0
P (Print list of parts)
R   (Recover)
H (chooses Hybrid)
Partitions numbers to be hybridized: 3 4 5
Y (Good for GRUB question)
N (part 3 boot flag)
N (part 4 boot flag)
Y (part 5 boot flag make NTFS bootable partition)
P (Print list of parts again)
W (Write the new MBR)
Y    (Yes! write the new MBR)
Reboot
Please ensure that the following questions get appropriate defaults or correct values for the MBR hex codes as suggested by Gdisk. These are examples using a standard, your partition numbers will have a differential of 1. Given the prior Gdisk steps, your mapping will look as follows
GPT1+2 (EFI+OSX) = MBR1 (You lose read visibility to OSX from Windows).
GPT3 = MBR2 (Recovery HD).
GPT4 (Shareddisk) = MBR3 (Shareddisk)
GPT5 (Bootcamp) = MBR4 (Bootcamp - This should be made bootable).
You can create variants of which partitions get mapped to which MBR). If you use 2 4 5, then Recovery will look like Free Disk space to Windows and can be corrupted. If you use 4 5, then EFI+OSX+Recovery HD will end up in MBR1. Try and see which works the best for you. In this configuration, I would also recommend not using any third-party NTFS tools.
The following is an example for 2 3 4
Creating entry for GPT partition #2 (MBR partition #2)
Enter an MBR hex code (default AF): AF
Set the bootable flag? (Y/N): n
Creating entry for GPT partition #3 (MBR partition #3)
Enter an MBR hex code (default AB): AB
Set the bootable flag? (Y/N): n
Creating entry for GPT partition #4 (MBR partition #4)
Enter an MBR hex code (default 07): 07
Set the bootable flag? (Y/N): y
In your case the steps will become...
Sudo gdisk /dev/disk0
P (Print list of parts)
R   (Recover)
H (chooses Hybrid)
Partitions numbers to be hybridized: 2
Y (Good for GRUB question)
Y (part 2 boot flag make NTFS bootable partition)
P (Print list of parts again)
W (Write the new MBR)
Y    (Yes! write the new MBR)
Reboot
After the reboot, check the output of sudo fdisk /dev/disk0.

Business Object creation error: The service mapping is missing

Hi developers,
In my CAF 7.1, I have my business object "maintenanceRequest" with several attributes.
Persistency is remote. Permission check is disabled.
Create operation is mapped to the external service (enterprise service) createMaintenanceRequest.
The input fields are mapped, output fields are not mapped since create operation doesn't have any.
All the other operations are not mapped.
I have exposed as web service the operation "create",
I have generated, built and deployed the app.
When I try to run it from wsnavigator I get an error in the SOAP response:
com.sap.caf.rt.exception.CAFCreateException: The service mapping is missing
Please note that the ES works ok (e.g. from Visual Compose 7.1).
The ES was imported in NWDS 7.1 from service registry.
Can anyone please help?
Thanks, regards
Vincenzo

Hi Sampath, thanks for your helpful reply.
I followed the steps from saphelp, but I get errors.
I mapped my external service destination (an R/3-based Enterprise Service published in service registry) to:
- UDDI_DESTINATION (error: objectNotExist) [but the ES is correctly published in service registry]
- wsdl address in backend R/3 system (error: Deserializing WSDL stream failed)
how should the logical destination be configured?
Thanks a lot
Vincenzo

Error in operation mapping

Similar Messages

Maybe you are looking for