Error in ora designer 10g

i have an error:
"could not find an installed JDK,SCM java tools may not work until registry is updated"
during installation oracle designer 10g , but i have jdk
1.4.2 !!!
is it want another version?

You have it in the wrong place.
Or you didn;t tell it where to find the JDK.
Either way, you probably have a difference between your procedure and the install manual. Suggest you re-read the install manual and evaluate your differences.

Similar Messages

Can't Install Oracle Designer 10g on Windows 7

When I try to install Designer 10g on Windows 7, the installer starts up, it asks me where to install the product, I choolse C:\DevSuiteHome_1. When it asks what to install, I choose "Complete". It then asks for the e-mail server; I leave this field empty and press Next. Then the installer aborts without any error message.

Which Designer 10g? Tell us the full name of the file from which you are installing. Some versions are available on OTN that cannot be installed stand-alone - they are upgrade packs for a previous version. Designer comes as part of the Oracle Developer 10g Suite, and you must install the entire suite. Oracle Reports is particularly important, because this is the tool that Designer's reports use.
Finally, give us your entire sequence of steps, what you did, what you saw on the screen, including error messages.

Weird error when trying to log in Designer 10g in Windows XP Prof. SP2

Hello,
I'm having a problem to log in because the software responds with the following messages:
ORA-12560: TNS: error in protocol adapter
Cause: A generic protocol adapter error occurred.
Action: Check addresses used for propel protocol specification. Before reposting this error, look at the error stack and check for lower level transport errors. For further detais, turn on tracing and reexecute the operation. Turn off tracing when the operation is complete.
RME-00220: Failed to connect to Repository
Cause: The msg file 'c:\oracle\product\oracle10gds\repadm61\meplus.msg' for product "RMMSGS61", utility "RME" could not be found.
I believe it is important to declare that I have installed Developer Suite 10g afeter the database 10g and this problem happens only wit Designer... All other packages JDeveloper and the others for instance work with no problem at all. Any help will be greatly appreciated. Thank you very much indeed...
Sincerely yours,
AndrÃ© Luiz

Hello,
Following the suggestion I copied the tnsnames.ora from the DB folder to the DES10G folder. The Developer Suite 10g was installed last. The contents of the tnsnames.ora in both oracle homes are the same now. Its contents are:
# tnsnames.ora Network Configuration File: C:\oracle\product\10.1.0\Db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
PHD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = andreltr)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PHD)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
The listener.ora file is the following:
# listener.ora Network Configuration File: C:\oracle\product\10.1.0\Db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = andreltr)(PORT = 1521))
I modified it from its original configuration which was (the only change was in the HOST field):
# listener.ora Network Configuration File: C:\oracle\product\10.1.0\Db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 200.176.28.172)(PORT = 1521))
The sqlnet.ora file is the following:
# sqlnet.ora Network Configuration File: C:\oracle\product\10.1.0\Db_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
When I try to login now the software responds with the following error:
Message
ORA-12560: TNS:error of the protocol adapter
Cause
A generic protocol adapter error occurred.
Action
Check addresses used for proper protocol specification. Before
reporting this error, look at the error stack and check for lower level
transport errors.For further details, turn on tracing and reexecute the
operation. Turn off tracing when the operation is complete.
Message
RME-00220: Failed to connect to Repository
Cause
Failed to connect to the requested Repository.
Action
Examine other reported errors for specific details.
What is the proper action please for I really need to use Designer. Thank you very much indeed.
Sncerely yours,
AndrÃ© Luiz

Error Designer 10g with DB10g XE

Hi!!!
I have installed Oracle Developer Suite 10g and DataBase 10g XE in the same machine.
I have created repository (accord instructions of the manual), but when i try make a relationship give me the following error:
Message
RME-00020: Internal API error - ORA-01652: no se ha podido ampliar el segmento temporal con 128 en el tablespace REPOS_TEMP
Cause
The API has detected an internal inconsistency.
Action
Check the detail of the associated Oracle Server error message
(ORA-xxxxx) and resolve it.
Message
RME-00011: Operation 'ins' on RELATIONSHIP_END has failed
Cause
An API operation request has failed for some reason.
Action
Examine other reported errors for specific details.
Message
RME-00222: Failed to dispatch operation to Repository
Cause
Requested operation failed because of other errors.
Action
Examine other reported errors for specific details.
Please help me... i'm newbie in database....
Thanks a lot!!!
pd: apologies for my english... but i speak spanish.

Your basic problem is lack of space in tablespace REPOS_TEMP:
ORA-01652: unable to extend temp segment by string in tablespace string
Cause: Failed to allocate an extent of the required number of blocks for a temporary segment in the tablespace indicated.
Action: Use ALTER TABLESPACE ADD DATAFILE statement to add one or more files to the tablespace indicated.
I think the other errors are results of the first error.
By the way Designer needs a lot of resources, so I'm not sure whether XE willl fulfil these requirements.
Werner

Designer 9i dmp file import error to Designer 10g

I have installed Designer 9i R2 and Designer 10g on two separated Windows XP.
I exported a dmp file of an application system from Designer 9i R2. I copied the dmp file to the other Windows XP.
I imported the dmp file to Designer 10g and the following errors appear:
RME-02105: Oracle error occurred
ORA-01986: OPTIMIZER_GOAL is obsolete
Does any one know how to resolve this problem?

Hi,
This issue has been reported with Designer Releases prior to 9.0.4.4 against 10g database.
Please upgrade to the latest Designer Release 9.0.4.5 the import will work fine.
HTH,
Wilson.

Oracle Designer 10g R2 Designer Gives Error on Windows 7

Can anyone suggest ?
Tried re installation and checked registry.,, All seems to be perfect as well as on the installed location.
Please suggest.
Thanks in Advance

Can you tell more about what you installed? On what version of Windows 7 did you install your designer version on? Did you only install designer or did you install any patches?
There is a doc id on oracle support: Designer 10g Compatibility with Windows 7 (Doc ID 1333750.1)
Regards,
Mark

Foreign Key Error Message ORA - 01430

I have a table name LSU_INTER_RESOURCES_T. I would like to add a foreign key constraint with the following command:
alter table lsu_inter_message_t
add constraint inter_message_id_fk
inter_request_id REFERENCES lsu_inter_requests_t(inter_request_id) ON DELETE CASCADE;
The system returned the error message:
ORA - 01430: column being added already exists.
if I drop the column inter_request_id I will lose data and when I create the constraint it places the column at the end of the table. Losing data is not an issue now because the table has no data but down the line I can see that this will be a real real hassle.
I would like to have the foreign key column defined in the sequence I chose when I designed the table layout. That is to say I want all of the key columns placed at the begining of the table row layout.
Can I move the column after I define it and how is this done? Is this a 10g feature?
Thank you, Ned

Try
alter table lsu_inter_message_t
add constraint inter_message_id_fk
foreign key(inter_request_id ) REFERENCES lsu_inter_requests_t(inter_request_id) ON DELETE CASCADE;

Oracle Online Library's dmp cannot be imported to Designer 10g

I am member of Oracle Online Libray. I have studied the module "Oracle9i Designer New Features".
I download the zip file "Des9iNFeClassSetup.zip" and unzip the files.
I follow th instruction to import dmp file "nfRepository.dmp" but I encounter the following error after I import the dmp file:
RME-02105 Oracle error occurred
ORA-01986: OPTIMIZER_GOAL is obsolete
Any help is appreciated.

I tried to import the dmp file to Designer 9i Version 9.0.2.91.9 Release 9.0.2.4 and the import is successful after enabling Version Support.
I did the same using Designer 10g but with the import error.
I am going to export the repository from Designer 9i after import from the dmp file and see if the re-export dmp file can be imported into Designer 10g.

Problem logging into Oracle Designer 10G

Hello developers,
I've downloaded and installed Oracle Designer 10G on my computer. I've installed it using the installation wizard. I wanted to login. I have my username and password but not the connect string. I don't know what my connect string is now.
During the installation, I've encountered such a message:
Oracle Designer and Oracle8i client import and export tools need to be installed into different Oracle homes. You can use the LOCAL and TNS_ADMIN registry variables(set under both Oracle Homes in the registry) to save having to maintain multiple copies of your TNSNAMES.ORA file. Please enter any information you wish to be set and click OK to continue."
So under this message, a default entry of "C:\orant\net80\admin" appears whilst for field Local, I've entered "orahome" which I assume to be my database alias.
Later on, I found out about 10G so I removed the copy of 6i I've installed using Universal Installer and proceeded to download and install 10G. Now the error message Im getting when I tried to login without giving a connect string is that "The user does not have an installed Repository. Invoke the Repository Administrator Utility. " So from the start menu, I choose Repository Administration Utility but nothing happened.
Could anyone that have experience with this installation let me know what should I do? Im really looking forward to using 10G Designer.If this is not solved, then I'll resort back to using 6i. Maybe from there things are easier. Thanks in advance.

After some heavy googling the problem is solved.

Peformance issues during Designer 10g R2 migration

Hi
Following a successful pilot migration from Designer 6.0 to Designer 10g R2, I'm running the real world migration.
The pilot took about 3 hours (using the migration wizard in the RAU), but the real one is taking much longer and I keep encountering tablespace errors, specifically ORA-01653 and ORA-01654. Our DBA is fixing these on the fly.
The DB is running ok, but in Windows Task Manager the RAU status is 'Not Responding' (which I'm used to for Designer Reports) and it's hanging on the screen for ages. When it does come back to life, I seem to get another tablespace error. It's hard to tell how much progress is actually being made.
After the pilot, we dropped the repository owner and recreated the repository (to clean it). We had some additional content in 6.0 which we needed to include as it wasn't in the pilot migration, but I don't think the size of the actual data we're migrating has increased significantly.
I'm not sure if I should perservere with the migration or abort it and restart - any suggestions? I don't know how far we have got (from the RAU) - is there a way for my DBA to check this perhaps?
Thanks, Antony

I am not very worried about the tablespace extension problems.
Designer seems to wait well for the tablespaces to be enlarged and then it will continue on without any issue.
the CDD-22300 has a Note on it:
Note 176738.1
Generating Package, Procedure or Function Hangs or Fails with CDD-22300
* fact: Oracle Designer 6.5
* fact: Server generator
* symptom: Generating a package, procedure or function hangs
* symptom: 100% CPU used
* symptom: Generating a package, procedure or function fails
* symptom: CDD-22300 An internal application error occurred. Contact Customer Support.
* cause: This problem can have several causes and is documented in the following bugs: Bug 1733476: PLSQL GENERATION DOESN'T RELEASE MEMORY USAGE Bug 1569508: GENERATION OF A PACKAGE USES ALL CPU AND MEMORY Bug 1940918: DESIGN EDITOR HANGS/NOT RESPONDING WHEN GENERATING PROCEDURE
fix:
There are a number of workarounds for this problem:
Workaround 1:
Close and restart the Design Editor.
Workaround 2:
Set the Server Generator preference PARSER=NO.
Workaround 3:
Move the cursor declarations to the Procedure property "Private
Declaration"

Portability between Designer 9i r2 and Designer 10g r2, and deployment?

I have some questions to ask...
I have been given the job of adding Oracle to the reportoire of databases available to be used for a commercial Delphi application. The idea is to create a database in 10g that this application can talk to.
I wish to develop the database, constraints and triggers etc using Oracle Designer (not because I think it's best, but simply I know how to use it, and don't know JDeveloper yet, and time is of the essence).
Here's where the problem lies: The last application I developed was on 9i r2 and was going to a 9i r2 platform, and I generated DDL for the database tables stuff, and also for the table API, ending up with two sets of script files to run on the target system. Two of the lines of code in the table API script were:
@ C:\oracle\9iDSHome\cgens72\sql\cdsaper.PKS
@ C:\oracle\9iDSHome\cgens72\sql\cdsaper.PKB
Of course the pathnames weren't right, but when I fixed them I managed to get the system installed correctly. However the clients for the application I am working on now should not have to have developer installed... I want them to be able to just run the script files into a 10g database and not worry about designer/developer at all.
The other issue is just as serious. Although clients shouldn't have to have designer installed, I want the application developer/company owner to be able to fiddle with the designer if he wants to. I have 9i where I work, and he will have 10g. Will I be able to do a repository export/dump from my 9i r2 and import it to his 10g r2? With the previous project I did, I couldn't even import the designer export from my 9i r2 to the 9i r2 at the workplace... it said "Incorrect header file" - it was lucky I had the DDL script files or I would never have got it in the database at all! If they had had a different version of oracle then I don't know what would have happened when trying to run those package files from developer (the comments say something about an error package or some such)!
Eventually I'm going to upgrade to 10g for database development but I don't want to just yet.
So my questions are:
1. Can I develop the system using 9i r2 DB and 9i r2 DS and then create DDL scripts to be run on 10g client databases without having to have developer installed on the client machines? could my "boss" distribute those two developer package files with the DDL scripts to the clients without breaking some kind of copyright?
2. Will I be able to import a Designer 9i r2 export into a Designer 10g r2 repository for my "boss" to make adjustments and produce refined DDL scripts himself later on?
If the only thing holding me back is having 10g installed where I work then tell me now and I'll take the plunge. If there's other issues I need to find a way around them.
I thank you in advance for any advice you can give
Thanks
Adam Sawyer

Hi,
This issue has been reported with Designer Releases prior to 9.0.4.4 against 10g database.
Please upgrade to the latest Designer Release 9.0.4.5 the import will work fine.
HTH,
Wilson.

Error while installing Oracle 10g on Solaris 9 x86

Hi all,
I got several error after install oracle 10g. After I run the root.sh. It prompt :
Starting Oracle CSS service under init(1M)
Expecting the CRS daemons to be up within 120 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
and when I start sqlplus, it prompt:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Intel SVR4 UNIX Error: 2: No such file or directory
and following the error message prompt every minutes.
"oracle: (Oracle CSSD will be run out of init)"
"root: Failure in CSS initialization opening OCR."
I don't think reinstall oracle will solve my problem if I don't figure out what going wrong. Could anyone tell me what I need to do? Thanks very much for helping.
Cheers,
Alex

Check also if the t-bit is set:
[root@vtl1g121 ~]# ls -dl /tmp
drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
This is needed to mark the filesystem/directory as temporary.
Sometimes this can cause such problems also
Command: chmod +t /tmp

While creating a simple VIEW Error comes ORA-00604,ORA-00001

I am using
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Prod
a simple view statement gives an error.
ORA-00604: error occurred at recursive SQL level 1
ORA-00001: unique constraint (SYS.I_COL1) violated
what may be the reason

Hi,
It seems that SHORT_NAME cause problem.
SQL> CREATE OR REPLACE FORCE VIEW V_META_IMAGELIST
2 AS
3 SELECT A.SEQ_NUM, A.SHORT_NAME, A.DESCRIPTION, A.MULTISELECT, A.ENTITY_SEQ_NUM, A.SECTION_TYPE_
SEQ_NUM,
4 B.SHORT_NAME, A.ACTIVE, A.ENTERED_BY,
5 A.ENTRY_DATE, A.IMAGELIST_LEVEL, A.STARTINGSENTENCE, A.SEPARATOR, A.CONJUNCTION, A.ENDINGSENTEN
CE,
6 A.META_IMAGELIST_ELEMENT_SEQ_NUM
7 FROM meta_imagelist A, SECTION_TYPES B
8 WHERE A.SECTION_TYPE_SEQ_NUM = B.SEQ_NUM(+) ;
B.SHORT_NAME, A.ACTIVE, A.ENTERED_BY,
ERROR at line 4:
ORA-00604: error occurred at recursive SQL level 1
ORA-00001: unique constraint (SYS.I_COL1) violated
SQL> ed
Wrote file afiedt.buf
1 CREATE OR REPLACE FORCE VIEW V_META_IMAGELIST
2 AS
3 SELECT A.SEQ_NUM, A.SHORT_NAME, A.DESCRIPTION, A.MULTISELECT, A.ENTITY_SEQ_NUM, A.SECTION_TYPE_
4 B.SHORTNAME, A.ACTIVE, A.ENTERED_BY,
5 A.ENTRY_DATE, A.IMAGELIST_LEVEL, A.STARTINGSENTENCE, A.SEPARATOR, A.CONJUNCTION, A.ENDINGSENTEN
6 A.META_IMAGELIST_ELEMENT_SEQ_NUM
7 FROM meta_imagelist A, SECTION_TYPES B
8* WHERE A.SECTION_TYPE_SEQ_NUM = B.SEQ_NUM(+)
SQL> /
Warning: View created with compilation errors. --this is because I haven't any tables
SQL> show error
No errors.
SQL> Try to rename SHORT_NAME to an other word.
Nicolas.

ORA-12514, 10g 2(beta) Oracle DBCA at install on winXP with sp2

Hello!
The error mesage ORA-12514 has appear during the instalation of 10g Release 2, at window "Configuration Assistant";
Oracle Net Configuration Assistant have status Succeeded, but during next tool name "Oracle database configuration assistant" at point "Create and start oracle...services' the I've received the ORA-12514 error!!
my pc name is: srvdzt43
my pc is: mydomain.prv
currently I'm logged with user "Administrator" on my pc, not on domain
i've installed Microsoft Loopback Adapter (ip= 10.10.10.10)
my ip addres and dns are entered by me, not automatically
my PC is an IBM thinkPad T43 at 512RAM, 2Gz, win XP with sp2
I post now, the console response and then, the tnsname.ora,listener.ora and sqlnet.ora:
C:\>tnsping srvdzt43
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 29-AUG-2
005 15:29:19
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
Used EZCONNECT adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=srvdzt43))(ADDRES
S=(PROTOCOL=TCP)(HOST=10.10.10.10)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=192.1
68.100.69)(PORT=1521)))
OK (0 msec)
C:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 29-AUG-2005 15:33
:47
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 29-AUG-2005 13:10:41
Uptime 0 days 2 hr. 23 min. 7 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\product\10.2.0\db_1\network\admin\listener.o
ra
Listener Log File C:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SRVDZT43.mydomain.prv)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
C:\>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 29-AUG-2005 15:35
:46
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
C:\>
------------sqlnet.ora--------------------------
# sqlnet.ora Network Configuration File: #C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
------------tnsnames.ora-----------------------------
# tnsnames.ora Network Configuration File: #C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
----------------listener.ora----------------------------
# listener.ora Network Configuration File: #C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = srvdzt43.mydomain.prv)(PORT = 1521))
I've select from Oracle Universal Installer the default setings (Enterprise option and orcl database name) ;
In Computer Management-> Services I have only "OracleOraDb10g_home1TNSListener"
service; The "Orcl" database services has been removed when I hit the "Abort" option (when I received ORA-12514 error);
Anyone can iluminate me with this problem?
A few months ago I've installed the 10g product version with no error!
Before I try to install 10g relese 2(beta), I read plenty of documentation about installing the new verision of 10g release 2, and I removed any trace from old 10g Oracle (directories, registry, environment variabile,etc)
The problem is that I can't install now even the old 10g version!
I've tried on another Pc (this PC, let's say "never hear before the word ORACLE" and have the same config winXP+sp2) ..and again the same ORA-12514 error appear!
Because I could install the old 10g on my T43 laptop a few mounths ago with no error, I think the only explanation is that the windows updates, which I 've upgrade my laptop in this time cause the Oracle instalation/create database services to crush!
Am I right...? what can I do? ... I realy need the ORACLE 10g to move on it, my old Oracle 9 databases, and continue my development work!
Thanks! Have a nice day!
XaM

I see your tnsnames.ora does not contain an entry for service_name srvdzt43 , so EZCONNECT (or hostname) resolution is used, this is possible because service_name and hostname are the same.
There's a known problem with EZCONNECT connections, if a connect string is provided, but no password (throws ORA-12514), maybe there's something like that in the DB creation scripts.
I recommend you add a proper connect string into tnsnames.ora and try again.

Err 62007: SQL Error: 99999 ORA-24338: Statement Handle not Executed

Hi,
I am facing a problem while adding a new parameter n my JSP Report JDBC query based on a ref-cursor from a stored procedure define in a package in database.
No problem at database level, I have added the new parameter in package specification and Package body for that procedure and compile my package, it complies without any error and warning.
but when I open the report and add parameter in the report JDBC query window, then it is generating a error message,
"Err 62007: SQL Error: 99999 ORA-24338: Statement Handle not Executed "
and I am unable to add the new parameter in report.
e.g.
Actual which was working is:
My-package.My-procedure(:P1,:P2,:P3 ,:P4,:P5,:P6,:P7)
I want to do this:
My-package.My-procedure(:P1,:P2,:P3 ,:P4,:P5,:P6,:P7,:P8)
but unable to do due to this error message:
("Err 62007: SQL Error: 99999 ORA-24338: Statement Handle not Executed ")
Reports Builder 10g:
Database 10g:
Operating system windows XP:
using JDBC Query base on ref-cursor coming from the stored procedure define in the Package.
Regards,
Khan

and compile my package, it complies without any error and warning.That doesn't mean anything in this case. You are getting a runtime error, not a compilation error. The error is coming when you execute your procedure.
Did you test your modified procedure in sqlplus or SQL Developer?

Error in ora designer 10g

Similar Messages

Maybe you are looking for