Error in Oracle 10g Express Edition

Hi Guys,
While am start the Database in Oracle 10g Express Edition, it showing error like process has been already started
Can anyone give the advice to resolve this problem
Thanks in advance
Dhiva

While am start the Database in Oracle 10g Express EditionHow ?
it showing error like process has been already startedWell, so it works ? Did you try to connect ?

Similar Messages

Installation errors with Oracle 10g Express Edition client.

Hi,
I want to use the Oracle 10g XE client on my Ubuntu (Lucid) laptop. I am following the installation instructions as mentioned at Installing Database Oracle XE Client. When I run the .sh file for my bash shell, I keep getting this error message:
root@machine:/usr/lib/oracle/xe/app/oracle/product/10.2.0/client/bin# . ./oracle_env.sh
/usr/lib/oracle/xe/app/oracle/product/10.2.0/client/bin/nls_lang.sh: 112: [[: not found
/usr/lib/oracle/xe/app/oracle/product/10.2.0/client/bin/nls_lang.sh: 112: [[: not foundAnd, when I look up nls_lang.sh at around line 112, I see this:
# Detertmine the LANGUAGE_TERRITORY part of NLS_LANG
# we derive it from the current locale by inspecting the LC_ALL and
# the LANG environment variable. Other LC_* environment variables
# are not inspected.
if [[ -n "$LC_ALL" ]]; then
locale=$LC_ALL
elif [[ -n "$LANG" ]]; then
locale=$LANG
else
locale=
fiHow do I get the client working ?

So, I have been searching around to look for a method to enable the client installed on my laptop to connect to the database. Granted that, the server is not installed on my local machine. But, I am simply, unable to find any clues as to how do I specify the database name that the client should connect. The ORACLE_SID parameter needs to hold a database name; but, where are the IP address and port number mentioned for the database ? One site recommended that tnsping be used to check for database existence; whereas, tnsping is not installed. Then, the commonest hint that I keep bumping into - TNSNAMES.ORA file. Since I have only the client installed, I don't even see the network/admin folder (or whatever the path is to the .ora file) under /usr/lib/oracle/xe/app/oracle/product/10.2.0.
It can't be this hard to connect to an Oracle server with only a itsy-bitsy Oracle installed on my local machine, hmmm ?

Error accessing table on Oracle 10g Express Edition

I am unable to access tables uploaded after Oracle 10G express edition installation.
The error message is ""ORA-00942: table or view does not exist"
Meanwhile, the table is in existence when viewed via object browser.
Pls can anybody help out.

Hi;
Which user you try to query? Table under which schema?
You can query as follows:
SELECT
TABLE_NAME
FROM
ALL_TABLES
WHERE
TABLE_NAME LIKE '%xxx%'
ORDER
BY TABLE_NAME;
Regard
Helios

Can't uninstall or reinstall oracle 10g express edition in w/server 2003

Hi,
I need help from all of you, i already install oracle 10g express edition in
windows server 2003 in D drive. but i can't remove because the oracle not in
the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the
database but can't go to the database home page.The error message (the install
cannot proceed as service OracleServiceXE is present on the system. Remove the
service , reboot the systemand retry the installation) can any one guide me to use
command prompt to remove.
My email address [email protected]
Thanks

Hi,
Perform the following steps, this will solve your problem and can go with new installation. :-)
(Only perform the steps 7.2 section and here is the link : http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABDJDCD
Manually Removing Oracle Database XE
If the deinstallation is interrupted, follow these steps to manually remove Oracle Database XE from your computer:
Step 1: Stop the Oracle Database XE Services
Step 2: Remove the Oracle Database XE Registry Editor Settings
Step 3: Update the System Variable Path
Step 4: Remove Oracle Database XE from the Start Menu and Desktop
Step 5: Remove the Oracle Database XE Directories
Step 6: Install and Run the Windows Installer CleanUp Utility
7.2.1 Step 1: Stop the Oracle Database XE Services
Follow these steps:
1. Open the Windows Services utility: From the Start menu, select All Programs, then Administrative Tools, and then Services.
2. If any of the following Oracle services exist and have the status Started, then select each of the services, and click Stop:
OracleXE
OracleXETNSListener
OracleJobSchedulerXE
OracleXEClrAgent
OracleMTSRecoveryService
3.
Exit Services.
See also the Microsoft online help for more information on stopping services.
7.2.2 Step 2: Remove the Oracle Database XE Registry Editor Settings
Follow these steps:
1.
Log on to Windows with Windows administrative privileges.
2.
Ensure that you followed the instructions under "Step 1: Stop the Oracle Database XE Services" to stop the Oracle Database XE services.
3.
Start the Registry Editor at a command prompt:
SYSTEM_DRIVE:\> regedit
4.
Go to HKEY_CLASSES_ROOT.
5.
Delete the following keys:
NEED TO CONFIRM THE XE-SPECIFIC ONES.
6.
Go to HKEY_CURRENT_USER\Software.
7.
Under Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start Menu\Programs, delete the Oracle Database 10g Express Edition key.
8.
Go to HKEY_LOCAL_MACHINE\SOFTWARE and search for the ORACLE group key.
9.
Expand the ORACLE group key and then delete the KEY_XE and OracleMTSRecoveryService keys.
10.
Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI.
11.
Expand the ODBCINST.INI key and remove the Oracle in XE key.
12.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
13.
Delete the following keys:
OracleServiceXE
OracleXEClrAgent
OracleXETNSListener
14.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application.
15.
Delete the Oracle.xe key.
16.
Exit the Registry Editor.
17.
Restart your computer.
Thanks,
Rams...
Edited by: user10888288 on May 3, 2010 5:58 AM

Oracle 10g express edition can support forms 6i & reports

I have installed oracle 10g express edition and installed forms 6i. while connecting forms 6i into ora 10g express edition it is not connecting in windown xp platform.
It is showing only "dont send error". I want to know oracle 10g express edition can support forms & reports.
Please give me solution.
Thanks
Govindarajan

this is from metalink :(https://metalink.oracle.com/metalink/plsql/f?p=140:1:8190633972492825) for windows 2003
Application Tier Certifications
OS      Product      Server      Status      Addtl.      Info.      Components      Other      Issues
2003      6.0.8.26.0 Patch 17      9.2      Desupported      Yes      Yes      N/A      N/A
2003      6.0.8.26.0 Patch 17      10g      Desupported      Yes      Yes      N/A      N/ASeems you are right, but if you filter only certified version result is NONE!
And anther link is prooving that:
https://metalink.oracle.com/metalink/plsql/f?p=200:27:8190633972492825::::p27_id,p27_show_header,p27_show_help:609971.992,1,1
Nice start to read is:
http://www.oracle.com/technology/products/forms/htdocs/FormsSOD.html

Oracle 10g Express Edition Limitations

hi,
i want to know the limitations of Oracle 10g Express edition ,, yesterday i got a problem when reconfiguring SGA of one of our client's Oracle Express edition database. i was resizing it from 140MB to 800MB,, n got errors.. plz gimme some links which can state the limitations of memory usage for Oracle Express ed...
Thanx
Muhammad Umar Liaquat

How about this link?
http://download-uk.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABIECJA
And for comparison:
http://www.oracle.com/database/product_editions.html
C.

Oracle 10g express edition installation file corrupt?

Hi
I have now tried at least 5 times. I downloaded the beta Windows version of Oracle 10g express edition. The download is successful each time but every time I try to run the installer, it says "Error in installation file". Anybody else facing this problem?

Hi,
Have you checked for any errors in log file....????
Can you connect via SQL*PLUS ... , for example...????
Regards,
Simon

Oracle 10g express edition ..ampersand substitution variable

when i enter the ampersand substitution variable and run the script in the oracle 10g express edition it is giving me the error of (ORA-01008: not all variables bound)...can someone please indicate what the problem is..
thank you

i am running the script in the browser but when i run it it does not give me the possibility to enter the value and that error which i mentioned before comes instantly
reuben

Oracle 10g Express edition,can't visit database homepage

I have installed Oracle 10g Express edition without error meggage, It seems goes well ,but when I want to visit my database_homepage on http://127.0.0.1:8080/apex, I see this:
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
Please try the following:
Click the Refresh button, or try again later.
Open the Web site home page, and then look for links to the information you want.
If you believe you should be able to view this directory or page, please contact the Web site administrator by using the e-mail address or phone number listed on the Web site home page.
10061 - Connection refused
Internet Security and Acceleration Server
Technical Information (for support personnel)
Background:
The server you are attempting to access has refused the connection with the gateway. This usually results from trying to connect to a service that is inactive on the server.
ISA Server: csscisaser
Via:
Oracle is installed on my own computer.I think ISA should do nothing with it.And I have removed proxy setting in Internet exploer,but the error still happed.
I used netstat-a,and can find this:
proto :tcp
local address: myxxxxxx:8080
foreign address myxxxxxx:0
state : listening
does it mean my oracle http listener is started?

Open a command line and
- enter ping 127.0.0.1 ... should tell whether
connectivity is possible. If not, something is
blocking, and that something is usually a firewall.ping 127.0.0.1. I can connect to 127.0.0.1,very fast.but when I ping 127.0.0.1:8080 ,Can't get response.
enter ipconfig /all
enter and post output of lsnrctl status
There are so many output content.And you may see some #^$*#*&^$#@&* because I'm using Chinese version Oracle and OS.
IPconfig
Windows IP Configuration
        Host Name . . . . . . . . . . . . : cjis-e89f34e63f
        Primary Dns Suffix . . . . . . . :
        Node Type . . . . . . . . . . . . : Hybrid
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : xxxx.wan
Ethernet adapter 本地连接:
        Connection-specific DNS Suffix . : xxxx.wan
        Description . . . . . . . . . . . : Broadcom NetXtreme 57xx
roller
        Physical Address. . . . . . . . . : xx-13-72-7D-67-8B
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
        IP Address. . . . . . . . . . . . : 172.18.9.30
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : 172.18.9.252
        DHCP Server . . . . . . . . . . . : 172.18.18.9
        DNS Servers . . . . . . . . . . . : 172.18.18.9
        Primary WINS Server . . . . . . . : 172.18.18.9
        Lease Obtained. . . . . . . . . . : 2007年7月16日 15:51:15
        Lease Expires . . . . . . . . . . : 2007年7月24日 15:51:15
LSNRCTL status
正在连接到 (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
LISTENER 的 STATUS
别名                      LISTENER
版本                      TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Prod
ction
启动日期                  20-7月 -2007 11:19:13
正常运行时间              0 天 2 小时 17 分 10 秒
跟踪级别                  off
安全性                    ON: Local OS Authentication
SNMP                      OFF
默认服务           XE
监听程序参数文件          C:\oraclexe\app\oracle\product\10.2.0\server\network\
dmin\listener.ora
监听程序日志文件          C:\oraclexe\app\oracle\product\10.2.0\server\network\
og\listener.log
监听端点概要...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=cjis-e89f34e63f)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation
HTTP)(Session=RAW))
服务摘要..
服务 "CLRExtProc" 包含 1 个例程。
例程 "CLRExtProc", 状态 UNKNOWN, 包含此服务的 1 个处理程序...
服务 "PLSExtProc" 包含 1 个例程。
例程 "PLSExtProc", 状态 UNKNOWN, 包含此服务的 1 个处理程序...
服务 "XEXDB" 包含 1 个例程。
例程 "xe", 状态 READY, 包含此服务的 1 个处理程序...
服务 "XE_XPT" 包含 1 个例程。
例程 "xe", 状态 READY, 包含此服务的 1 个处理程序...
服务 "xe" 包含 1 个例程。
例程 "xe", 状态 READY, 包含此服务的 1 个处理程序...
['/pre']
Display contents of
C:\windows\system32\drivers\etc\hosts.['pre']
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host
127.0.0.1       localhostMessage was edited by:
sailfish83

Oracle 10g express edition browser login problem

Hi
I installed oracle 10g express edition and after installing successfully logged in browser , unlocked hr login and also created one form then I shutdown the database and rebooted my pc and since then when I try to login to "go to Database Home page" after starting database , I get a cookie 127.0.0.1 with username and password, First of all I am not sure what username/password it is expecting, I believe it requires my Windows XP username and password , I tried to enter couple of times my pc login username which has administrator privileges, I also checked it has ora_dba group but after entering pc username , password browser opens saying "unauthorized". I created another os user and tried with that still same. I tried entering oracle password "SYSTEM" and password for it but still could not login, I tried HR username password still nothing.
I tried disabling firewall but still same issue. I tried to re-install two time but still same .
Start database dos prompt does show all the process are started successfully .
I also did ping for 127.0.0.1 and it does ping.
I tried everything what I knew.
Can anyone please help me ..to resolve this issue .

Hi
This is how I resolved the browser login problem .
I checked the listener log
C:\OracleXE\app\oracle\product\10.2.0\server\NETWORK\log
And found the error
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
I have another version for oracle installed on my pc .
I ended both the oracle process (Oracle.exe) through the Task Manager
Then manually started OracleServiceXe service through Component Services
Control Panel Performance & Maintenance Administrative Component Services
Then did following
Programs Oracle Database10g ExpressEdition Start Database
Programs Oracle Databse10g ExpressEdition Go to Database Homepage
Enter username SYSTEM
Enter password xxxxxx whatever given at the time of installing.
And I did successfully login to the browser .
Hope this will help to those of you who have run into similar problem which I faced
Good Luck .
A. Patil

Oracle 10g Express Edition installation problem in windowsXP

while installing the Oracle 10g Express Edition in windows XP ,
it is showing an error like this ,
the cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error.
If anybody knows solution to this problem plz mail me to this email id
[email protected]

I think you should probably download the file again, it might be corrupt.
~Jer

Uploading photo in oracle 10g express edition

Hi,
I want to upload photo in my database running on oracle 10g express edition.This process must handle simultaneous uploading and with minimum error. Problem is the site is online and anyone can upload garbage,etc.so i am planning to collect images through email and then photo would be uploaded by some data entry operator. please suggest me some process
Thanks

878927 wrote:
How can use these loader tools? and what will be the advantage by going through these tools?please explain.Another Condition is i have to scan the photos before uploading it to databaseThere are instructions on how to use SQL*LOADER in the on-line documentation. I meant to say that you have to decide the best way to load the data. I just listed some examples on possible ways it can be done.
Apex is a database application that can be used to generate web pages based on database tables. It can also load files from clients. You can read about Apex in the Apex forums here on OTN or in the on-linedocumentation

Oracle 10g Express Edition / 64-bit client

hi all,
I have Oracle 10g express edition installed on a remote Vista/32-bit machine. I installed the XE Client on a Vista/64-bit and got the following error:
UnsatistifiedLinkError: ocijdbc10.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform.
So, I tried installing the Instant Client (64-bit) and I'm getting a similiar error:
UnsatistifiedLinkError: ocijdbc10.dll: Can't load IA 64-bit .dll on a AMD 64-bit platform.
Using the XE Client, I'm able to login using sqlplus. Anyone have any ideas ??
thanks jim
Message was edited by:
user584351

Hi Jim, unless something has changed recently - the installation instructions for XE specifically state it is for a 32-bit windows operating system. Also, it does not mention using Vista. If you have access to the 10g Express forum they may have more information there for you.
Michael W. Cunningham

Oracle 10g Express edition on Open Suse 10.2 mahine Insatllation vows !

The Installation Oracle 10g Express edition on Open Suse 10.2 mahine,
requried the installation of libaio... i installed the package by smart ....
after that installation was fine...
but when i try to login :
following exception occurs :
oracleXE: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
I reinstalled oracle and libaio but result was same .. ..
"rpm -q libaio" prints "libaio-0.3.104-32"
I tried to install Oracle libaio package .. i downlaoded it from Oracle web site...
but it gave following exception :
checking for libaio >= 0.3... no
checking for libaio 0.1... no
configure: error:
*** libaio is required.
smart info libaio output :
Name: libaio
Version: 0.3.104-32@i586
Priority: 0
Group: System/Libraries
Installed Size: 31.3kB
Reference URLs:
Flags: new
Channels: SUSE 10.2 Repository
Summary: Linux-Native Asynchronous I/O Access Library
Description:
The Linux-native asynchronous I/O facility ("async I/O", or
"aio") has a
richer API and capability set than the simple POSIX async I/O facility.
This library provides the Linux-native API for async I/O.
The POSIX async I/O facility requires this library to provide
kernel-accelerated async I/O capabilities, as do applications that
require the Linux-native async I/O API.
Name: libaio
Version: 0.3.104-32@x86_64
Priority: 0
Group: System/Libraries
Installed Size: 31.9kB
Reference URLs:
Flags: new
Channels: RPM System; SUSE 10.2 Repository
Summary: Linux-Native Asynchronous I/O Access Library
Description:
The Linux-native asynchronous I/O facility ("async I/O", or "aio") has
a richer API and capability set than the simple POSIX async I/O
facility. This library provides the Linux-native API for async I/O. The
POSIX async I/O facility requires this library to provide
kernel-accelerated async I/O capabilities, as do applications that
require the Linux-native async I/O API.
Please help...
-jasdeep

It probably isn't visible by your oracle environment, please verify the value of your LD_LIBRARY_PATH, PATH, and ORACLE_HOME environment variables.
~ Madrid.

Installing Oracle 10G Express Edition on Linux after installing Libaio-0.3

I had got a error while installing 10G Express Edition on Redhat Fedora core 4 linux after installing libaio-0.3.104-2.i386.rpm
I had given the following command in Linux Command prompt to install the oracle database 10 G Express Edition (oracle-xe-10.2.0.1-1.0.i386.rpm)
# sudo rpm -ivh /tmp/oracle-xe-10.2.0.1-1.0.i386.rpm
The error I had got is as follows:
Preparing.....#####################[100%]
1:oracle-xe Warning:/etc/init.d/oracle-xe saved as /etc/init.d/oracle-xe.rpmorig
error:Unpacking of archive failed on file /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/ons;4698950F:cpio:MD5 Sum Mismatch

The steps I am asking is for installing oracle 10G express edition on Redhat Fedora core 4 Linux version. Now, after downloading the fresh copy of Oracle 10G express edition from the Oracle site. I have successfully installed oracle now.
I was getting the following errors - I have pasted previous query for the problem which I had faced after installing Oracle 10 G Express Edition successfully on Redhat Fedora Core 4 Linux.
The Previous Query is as follows:
Thanks For Guiding Me All of you!
Finally, I have installed Oracle 10G Express Edition on Redhat Fedora core 4 Linux.
Now, I am having the following problems:
After making the changes as per my Reference mentioned in my different messages, I had done the troubleshooting steps going to Options and setting the same.
1.When I try to load the http://127.0.0.1:8080/apex page it gives an error popup:
" The connection was refused when attempting to contact 127.0.0.1:8080 "
2. After opening the Run the SQL Command Line by clicking on applications and When I say " Connect System and when prompted for password, I have entered the password and gives another error as follows:
ORA-01034 : Oracle not available
ORA-27101: Shared Memory realm does not exist
Linux Error:2:No such file or directory
3. When I try to manually start the Listener or Services, It gives one more error:
Root Not a Member of DBA Group
I need to What is happening or What is the Problem and How will I rectify them?

Error in Oracle 10g Express Edition

Similar Messages

Maybe you are looking for