Error in ordering UCSS device

Hi,
I have to order below UCSS Products but couldn't find them in CCW. May be i am missung any top level SKU.
L-UCSS-MSG
L-UCSS-MSG
Cisco
UCSS for Messaging Products - Unity/Unity Cxn
L-UCSS-MSG-3-1
L-UCSS-MSG-3-1
Cisco
UCSS for Messaging - 3 Years - 1 User
Can anyone provide me support to find the SKU or process to order it?
Prompt response will be much helpful.
Thanks in advance.
Regards,
Manthan

What was the fix for this? I'm having it too.
CM Version: 4.1(3)sr3a
the only difference is we installed 4.1(3), and upgrade all the way to sr3a the first time.
Uninstall and Re-install did not work.

Similar Messages

Tried to update ITunes, but keep getting error: Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services". How do I get my ITunes back?

Tried to update ITunes, but keep getting error: Service "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services."
So how do I get my ITunes back?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Unable to download iTunes on my second windows computer (64 bit). I got it fine on my first one. After downloading the program and installing it, I keep getting an error message:Apple Mobile Device Failed to Start. This happens wven when my IPhone 5c is t

I am unable to download iTunes on my second Windows 8 computer (64 bit). I got it fine on my first one and have used it quite a bit. After downloading the program and installing it on the second computer, I keep getting this error message: "Apple Mobile Device Failed to Start." This happens when when my IPhone 5c is connected via Wi-Fi and I have clicked on "Trust This Computer." (I have tried to install several times-- It gets hung up when it reaches"Starting Services.")

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

HT3204 During installation of Itunes I get an error Service "Apple Mobile Device" failed to start. Verify that you have sufficient privledges to start systen servuce,

During the installation of Itunes I get the following error: Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privledges to start system service. I then have three buttons abort, retry and ignore. I have hit each button once and got no good results.

Chaps and chapesses,
I too was having the same problem when I tried to update and then unfortunately uninstall and re-install itunes. But, like Nige above me says, you need to uninstall all your Apple software and then re-install itunes.
Have a look at the response given to this forum post:
https://discussions.apple.com/thread/5819470?tstart=0
I did exactly as the turingtest2 said:
I removed all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Then I restarted my computer, and the install of itunes worked like a dream. None of this ignore, abort, cancel nonsense.
Hopefully all your respective versions of itunes will work soon. Cheers Nigel280

I have an HP Pavilion zv6000 laptop with which I have used iTunes for years. I downloaded iTunes version 11.1.4.62 and rcvd error msgs (Apple Mobile Device failed to start. Verify sufficient privileges to start system svc. Then a MSVCR80.dll not found.???

I have an HP Pavilion zv6000 laptop with which I have used iTunes for years. I downloaded iTunes version 11.1.4.62 and rcvd error msgs (Apple Mobile Device failed to start. Verify sufficient privileges to start system svc. Then a MSVCR80.dll not found.???

Hello Don,
Thank you for the details of the issue you are experiencing with iTunes. I suggest removing iTunes and all related components and reinstalling iTunes for the issue you described. The following article has steps to do this(it is important to remove all components in the order listed):
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
I recommend continuing with these articles if you continue to experience issues with iTunes:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

Error message saying a device attached to the system is not functioning

i m getting an error message saying a device attached to the system is not functioning whenever i m trying to connect my pc to my smartphone. i tried all your options like uninstalling failed updates from my update history, checking if their is any flag
in device manager option but nothing helped me.. plz solve my problem..

Hi,
Could you please have a share with your phone's information?
Based on what I know, different phones may have different softwares developed by the manufacturer to make the connection through Windows operating system, we may check with the phone's manufacturer side and see if there could be some helpful information
offered.
Besides, please take a check with
Event Viewer and see if any special errors logged there.
Best regards
Michael Shao
TechNet Community Support

I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

Hello AKCamus
To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Thanks for using Apple Support Communities.
Regards,
-Norm G.

TS1369 Hello! I have an Ipod Shuffle 2nd Generation and it is not recognized by my Windows 8 based laptop. An error message of 'USB device not recognized' is shown. I have the latest ITunes version installed, and tested the dock in other pc's.

Hello!
I have a problem connecting my Ipod Shuffle 2nd generation to my Windows 8 based laptop. The computer doesn't recognize the Ipod and issues an error message saying 'USB device not recognized'. I tried uninstaling ITunes(latest version) and all other Apple software and reinstaling it back again, checked my USB hubs in the 'Device Manager' section of the Control Panel, you name it.
I could really use some help solving this.
I've turned to the troubleshooting section in Apple Support but it has nothing concerning situations in wich the device isn't even shown in the 'My Computer' folder.
Help a brother out, will you???

Found a solution in another forum http://en.kioskea.net/forum/affich-63733-ipod-not-detected-on-computer (a few posts down).
It was for an IPOD so you can see those details in the link.
Found how to reset a shuffle and inserted it into these instructions - did not have to follow his last steps.
- Turn off computer.
- Plug Shuffle into usb.
- Then you must reset your shuffle
To reset iPod shuffle:
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible.
- Start computer and it should install the usb driver for the ipod automatically.
- Your i pod will say do not unplug so don't. then open itunes and it will be there.
I did not have to do these thing below – did not get error message and shuffle was displayed in Itunes. / LMc
Just remember to not only eject ipod from itunes but stop usb.
Go to the program icons near the clock and right click the usb icon and "safely remove hardware" will appear and click it.
Stop it and select "apple ipod".

When I try to install iTunes on my Windows computer I get an error message, "Apple Mobile Device failed to start". After an incomplete installation when I try to open iTunes I get an error message, "MSVCR80.dll missing". I downloaded MSVCR80.dll.

When I open iTunes I get an error message "MSVCR80.DLL missing". I downloaded this .dll and installed in C:\Windows|System32. I then scanned my computer to fix registry errors.I uninstalled iTunes and reinstalled and got the following error message "Apple Mobile Device failed to start".

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

How to simulate a dml error in order to test try-catch code block inside a stored procedure

Hi,
What would be the easiest way to simulate a dml error in order to test a try catch block.
I would like to do it with a simple command from outside the stored procedure if possible.
I tried dropping the table that was updated but it hangs
Thanks,
Dani

Dropping the table that is the target of the procedure will give you an unpleasant surprise: the CATCH block will not fire. To wit, errors like missing tables can only be caught in outer scopes, but not in the procedure where the error occurs.
But you would add a fake constraint to a table which causes the update to fail. You need to do this in advance, not while running the procedure.
Erland Sommarskog, SQL Server MVP, [email protected]

When i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?

when i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?i tried using on a different pc.but still get the same result..

First thing i would try is to use another cable if available.

Error message on reading device saying error dialog user not activated

error message on reading device saying error dialog user not activated. unable to open book to read

I had Adobe upgraded to from 1.2. to 4.1 on my Glow Light Nock at Barnes and Noble yesterday. I use a MacBook Pro 2011 upgraded to 10.10.1. I have never had a problem download a book from the library to my nook in the past. By the time I get this issue resolved, my 2 week book will be overdue and my book club discussion 1/21. I have been to the genius bar at Apple store--not their problem. Two trips to B&N and
the tech guy said he could fix the problem on a PC but not a Mac. It is not a Mac or Nook world.

How to change P.O. duplication message type from warning to error for Order

Hi Experts,
I have a requirment to change P.O. duplication message type from warning to error for Order only not OrderTemplate. I can easily change message type in BAdI ISA_BASKET_MSGS, but I can't find the parameter to know if it's Order or OrderTemplate (DocType). If this BAdI is not good way, is there other way? and how to please?
Please advise / help..
Thanks, Jin

Thanks Easwer for your help.
The info for getting status from function is very clear and I followed you instruction and completed the coding in BAdI and tested it successfully .... Thank you very much. I need to learn where I can see the system status of the template, i.e. I1034 (Order Template) or Order or Quotation .....? if I need to filter out Quotation, I can easily do it in the BAdI. Could you please provide me more details?
Thanks again, Jin
Thanks again, Jin

MIGO error 'Purchase Order does not contain a confirmation control key'

Hi,
while posting GR to a PO i am getting an error ' Purchase order XXXXXXXXX does not contain a confirmation control key'
it is true that i have not defined any confirmation control key in PO, Aknowled rerd checkbox is also not ticked
Still why this message coming, what setting would be bringing this message
Please clarity

Hi,
Until the installation of Note 589422 (with SP SAPKH46C43) you could due to a program error - create a delivery even though the purchase order did not contain any confirmation control key.
This is now prevented through error message M7394. The transfer of this check (Confirmation control key existing in the purchase order, see Note 589422) was necessary as otherwise you could post a purchase order as desired. (Refer to also Note 616944 -> SAPKH46C44)
589422 Several inbound deliveries can be created with MIGO :
"Implement the program correction.
With Transaction SE91 create message M7394 with the message text:
Purchase order & & does not contain a confirmation control key".
After you implemented this correction, when you want to create an
inbound delivery with Transaction MB01 or MIGO or with
BAPI_GOODSMVT_CREATE and if the purchase order does not contain a
confirmation control key the system displays error message M7394
"Purchase order & & does not contain a confirmation control key".
Hope this can explain the error you met.
Regards,
Mauro

Toshiba PX1267E-1G32 Ext HD Error Message says USB device has malfunctioned

Hi
I have Windows XP and have been using my Toshiba External HD for a few years.
I am a novice.
Suddenly yesterday the below message appeared and I cannot get any computer to recognise the device.
"+USB Device Not Recognized+
+One of the USB devices attached to this computer has malfunctioned, and Windows does not recognise it. For assisstance in solving this problem click this message+."
I've tried to reinstall the drivers from the internet & the HDD CD but the same message occurs.
I've installed it onto another computer and the same error message.
The device still makes a noise and the blue light is on but no other action.
Is there anything I can easily do?
Many thanks in anticipation
naveedsyed

> I thought that sort of stuff wasn't meant to happen to external drives....
Why not? The external HDD is the same like an internal notebook HDD which dies as well
> Any other suggestions welcome
I assume this is a 3.5 HDD
You could remove this HDD from the HDD case and could connect this HDD directly to an desktop PC using an IDE or SATA cable (Im not sure if this is an SATA or IDE HDD).
If the BIOS would recognize the HDD then you would have good chances to get access to the data stored on this HDD.
Greets

Error in ordering UCSS device

Similar Messages

Maybe you are looking for