Error in OSD Task from Windows XP to Windows 7

Hi All,
Recently I installed CM2012 R2
and I am doing functional testing migration
of operating systems, I have a specific problema
when trying to migrate from Windows
XP to Windows 7, the steps like
capture settings in Windows,
capture settings network Work ok, but at the end of the restart in Windows PE task appears an error, these are tha last lines of my SMSTS.LOG
CreateProcess failed. Code(0x800700C1) TSManager 15/01/2014 03:53:32 p.m. 952 (0x03B8)
Command line execution failed (800700C1) TSManager 15/01/2014 03:53:32 p.m. 952 (0x03B8)
Failed to install boot image.
Unknown error (Error: 800700C1; Source: Unknown) TSManager 15/01/2014 03:53:32 p.m. 952 (0x03B8)
Failed to install boot image SMX00017.
Unknown error (Error: 800700C1; Source: Unknown) TSManager 15/01/2014 03:53:32 p.m. 952 (0x03B8)
Failed to reboot the system. Error 0x(800700c1) TSManager 15/01/2014 03:53:32 p.m. 952 (0x03B8)
Failed to initialize a system reboot.
Unknown error (Error: 800700C1; Source: Unknown) TSManager 15/01/2014 03:53:32 p.m. 952 (0x03B8)
Fatal error is returned in check for reboot request of the action (Restart in Windows PE).
Unknown error (Error: 800700C1; Source: Unknown) TSManager 15/01/2014 03:53:32 p.m. 952 (0x03B8)
An error (0x800700c1) is encountered in execution of the task sequence TSManager 15/01/2014 03:53:32 p.m. 952 (0x03B8)
This error is only trying a migration from Windows Xp to Windows 7. When I try to migrate from Windows 7 to Windows 7 with the same task sequence Works perfectly.
I have a problema with my Windows PE?? someone has the same trouble?
Thanks in advance
Luis

Your version of the WINPE boot image is not compatible. You get the 0x800700c1 when the bootsect.exe file is not compatible. The only option, I think, that you have is to use a bootsect.exe file from an older set of boot files.
Best, Jacob I'm a PC.

Similar Messages

ORA-12571 error while creating packages from Windows clients

Hello,
We are facing the ORA-12571 error while creating / replacing packages from Windows Clients connected to a 8.1.7.2.0 db on a Solaris server.
However, there are
1. no errors in connecting and creating transactions from a Sql session
2. no errors in creating / replacing unwrapped/wrapped small (few lines) packages
3. no errors in connecting from a Unix session (remote telnet sessions inclusive).
This happens only when creating wrapped/unwrapped packages, source code of which is greater than 500 kb approx.
Can somebody help me resolve this issue. Any Help would be greatly appreciated.
Regards.
Lakshmanan, K

Update: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
Ben

Errors using ICertView connection from Windows 7 to Server 2003 SP1

Hello!
I have a RootCA on windows server 2003 SP1. I connect to certificate store remotely using ICertView interface from Certadm.dll to retrieve issued certificates. This scheme works fine from windows XP, but when I call method openconnection (no matter which
way: from powershell, certutil, from code directly) I get following errors:
1. from host not in AD domain "CCertView::OpenConnection No more data available. 0x80070103 (WIN32/HTTP: 259)"
2. from AD domain joined host error is "0x800704C7 The operation was canceled by the user."
However, ICertAdmin interface works on Windows 7 without any problems.
Someone tells me that few years ago hi had checked this scheme and it`s worked!
after this article http://support.microsoft.com/kb/892500 I have a suspicion thah installed SP1 broke DCOM permissions. I configure permissions on COM host according to this article but connection won`t work...
On Windows 7 I have used 2 versions of certadm.dll - native windows 7 and from Server2003 - all the same :(
Can somebody help me make this work or explain why it is impossible?
Best regards.
-- Stanislav.

After enabling debug logging for enrollment by certutil
-setreg enroll\debug 0xffffffe3 and running certutil –view I have get following
1. from host in domain:
certutil –view :
========================================================================
402.511.948: Начало: 19.05.2014 13:34 43.913s
402.516.0: certutil.exe
402.520.0: GMT + 4,00
301.3888.0: certcli.dll: 6.1:7601.17514 retail
301.3888.0: certutil.exe: 6.1:7601.18151 retail
301.3788.465:<2014/5/19, 13:34:43>: Командная строка: CertUtil -config hostname\caname -view
419.5898.0:<2014/5/19, 13:34:43>: 0x0 (WIN32: 0)
705.1857.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
705.2226.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
705.3007.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
1207.632.0: 0x800704c7 (WIN32: 1223)
1207.705.0: 0x800704c7 (WIN32: 1223)
443.258.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
316.1383.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
301.3792.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
301.3807.509:<2014/5/19, 13:34:43>: Состояние команды: Операция была отменена пользователем. 0x800704c7 (WIN32: 1223)
402.377.949: Конец: 19.05.2014 13:34 43.991s
2. from standalone host
402.511.948: Начало: 19.05.2014 14:01 22.908s
402.516.0: certutil.exe
402.520.0: GMT + 4,00
301.3888.0: certcli.dll: 6.1:7601.17514 retail
301.3888.0: certutil.exe: 6.1:7601.18151 retail
301.3788.465:<2014/5/19, 14:1:22>: Командная строка: CertUtil –config
hostname\caname -view
429.2457.0:<2014/5/19, 14:1:23>: 0x31 (WIN32: 49): 8009030C: LdapErr: DSID-0C0904DC, comment: AcceptSecurityContext error, data 52e, v1db1
429.2457.0:<2014/5/19, 14:1:23>: 0x31 (WIN32: 49): 8009030C: LdapErr: DSID-0C0904F8, comment: AcceptSecurityContext error, data 52e, v2580
812.494.0:<2014/5/19, 14:1:23>: 0x8009030c (-2146893044)
805.233.0:<2014/5/19, 14:1:23>: 0x8009030c (-2146893044)
804.293.0:<2014/5/19, 14:1:23>: 0x8009030c (-2146893044)
705.429.0:<2014/5/19, 14:1:23>: 0x8009030c (-2146893044): Ignored!
705.2231.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
705.3007.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
1207.632.0: 0x80070103 (WIN32/HTTP: 259)
1207.705.0: 0x80070103 (WIN32/HTTP: 259)
443.258.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
316.1383.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
301.3792.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
301.3807.509:<2014/5/19, 14:1:23>: Состояние команды: Дополнительные данные отсутствуют. 0x80070103 (WIN32/HTTP: 259)
402.377.949: Конец: 19.05.2014 14:01 23.457s
any advise?
-- Stanislav.

Utl_file gives error when coping file from windows to linux

Red Hat Enterprise Linux Server release 5.7 (Tikanga)
Oracle 11.1
Hi there,
I can't copy a file with utl_file.fcopy after copying file with samba from winodws to linux. Only after I open the file on linux and save it, can I copy it :
1.) Copy file from windows (drag and drop)
2.)
SQL> exec utl_file.fcopy('XXMS_DATA_IMPORTS', 'Project_62.csv','XXMS_DATA_IMPORTS', 'xxms_pa_tasks_master.csv');
BEGIN utl_file.fcopy('XXMS_DATA_IMPORTS', 'Project_62.csv','XXMS_DATA_IMPORTS', 'xxms_pa_tasks_master.csv'); END;
ERROR at line 1:
ORA-29284: file read error
ORA-06512: at "SYS.UTL_FILE", line 270
ORA-06512: at "SYS.UTL_FILE", line 1243
ORA-06512: at line 1
3.)su to root
4.)open file and save it with vi, without changing anything
5.)
SQL> exec utl_file.fcopy('XXMS_DATA_IMPORTS', 'Project_62.csv','XXMS_DATA_IMPORTS', 'xxms_pa_tasks_master.csv');
PL/SQL procedure successfully completed.
How can I copy from windows to linux with samba, so this doesn't happen?
Please help

After the file is initially created in Linux:
What are the owner and group for the directory in which the file resides?
What are the directory permissions?
What are the owner and group for the file?
What are the file permissions?
What is the OS name of the oracle user?
After root vi's and resaves the file:
What are the owner and group for the file?
What are the file permissions?

Random error accessing CIFS shares from Windows

I am setting up some CIFS shares to be used from Windows clients and in the process I had some random problems accessing the shares.
In hope of finding the answer I checked the CIFS Service and the Active Directory Service, and while watching the screen for Active Directory Service I saw that the "Selected Domain Controller" changed from one to another. I now stayed within this screen and noticed that the "Selected Domain Controller" continued to change and then I found the problem, because an unknown Domain Controller appeared. The IP was 216.150.17.8
I found that when ever this Domain Controller was the selected one, all access to CIFS shares from Windows clients failed! This is correct, because the 216.150.17.8 of course is unaware of all users in Our Domain
So the Questions are:
- what is happening?
- and how to solve this?
- why is a Domain Controller 216.150.17.8 sometimes the Selected Controller?
- where does this 216.150.17.8 come from?
Have You seen anything like this?

I now have found out why the DC changes - it is because the CIFS service is restarting ;-(
This is a log snip
2009-5-14 09:24:53 Executing start method ("exec /usr/lib/smbsrv/smbd start").
2009-5-14 09:24:53 Executing stop method (:kill).
2009-5-14 09:24:53 Stopping because all processes in service exited.
2009-5-14 09:24:39 Method "start" exited with status 0.
2009-5-14 09:23:48 Executing start method ("exec /usr/lib/smbsrv/smbd start").
smbd: NetBIOS services started
2009-5-14 09:23:48 Executing stop method (:kill).
2009-5-14 09:23:48 Stopping because all processes in service exited.
2009-5-14 09:23:34 Method "start" exited with status 0.
It seems to happen when I access the share and thereby force a uservalidation
Any ideas?

Error while loading image from Windows Phone gallery into my Unity application

Hi,
I have developped a Windows Phone plugin for my Unity application which enable me to open the Windows Phone gallery in order to select an image and get its physic path.
I've used this path to load the image in the application with a WWW object but I get this error
"Error. Operation has failed with error 0x80070005: access is denied."
The path is correct because I display it and I've ticked the ID_CAP_MEDIALIB_PHOTO in the WMAppManifest.xml (Capabilities tab).
Here is my Unity C# test code to load the image with the path.
IEnumerator loadImage()
this.guiText.text = filePath;
WWW www = new WWW(filePath);
yield return www;
if(www.error == null)
GameObject texture = GameObject.Find("UNITY");
if(texture != null)
texture.guiTexture.texture = www.texture;
Any help would be appreciated ! Thanks in advance !

The error is correct. Your app doesn't have direct access to that path. It can directly load files only from its app data and install directories.
To load from the libraries I it needs to use the StorageFile to get brokered access.
The easiest way may be to copy from the library to local data then use WWW to load that. Otherwise you'll probably need to wrap the StorageFile can for use in unity. Unity has such a wrapper in the Unity Engine.WSA namespace that you can try

VPN - IPX error 733 when connecting from Windows XP

I have a 10.4.8 (Intel) OS X Server at our office. Our Mac users can VPN in with no problems, they get a valid IP from the vpn lease pool, can remotely control desktop machines, use files, etc. However, when trying to connect from XP, my user is getting an Error 733 referring to IPX. Anyone see this or have input for me? It's the boss who can't get in, so you can imagine I need to pay attention to this one!

PPTP only. Basic name/password challenge.
Server has private IP behind Netgear Prosafe Firewall appliance. Server is the DMZ. The Netgear receives our static IP from our T1 gateway, and performs DHCP and NAT for us. The OS X Server has a static private IP, and serves mail, ftp and vpn. (web to follow)
Clients can VPN in and receive a private IP within the specified range. I allow 40 bit and 128 bit encryption.
OSX Server: 192.168.200.250
Starting and ending IP addresses for VPN: 192.168.200.180 - 190
under Client Information:
DNS Servers: (two public DNS local to us from an ISP)
Search domains: (empty)
Network routing definition: 192.168.200.0 / 255.255.255.0 / private
From my PowerBook (10.4.8 client), I connect just fine, can use remote desktop connector to control XP boxes at the office, and access our files, printers, etc.

DFS network drive giving error to many clients of Windows 7 and 8.1 after accessing from run

Hi,
My network drive (DFS) is giving below error after upgrade OS from windows 2008 to 2012. On many clients of windows 7 and 8.1 we are able to resolve
by rebooting the system or by net use * /d command. But many user still getting error after accessing from mapped drive as well as from RUN command.
some area stupid thing happening, after accessing from RUN like \\networkdrive then it will open successfully and show all the shared folder. When we
click on particular shared folder it gives below error message and some works perfectly fine. Even though that person have rights on both the shared folder.
"""""check to make sure that the disk is properly inserted, or that you are connected to the internet or your network, and then
try again. If it still cannot be located, the information might have been moved to a different location. """"
Kindly suggest what should I do now?
Inder Johar

Hi Inder Johar,
Please check if clients could connect to \\domain\dfsroot and UNC path. You could refer to the article below to troubleshoot the issue:
DFS mapping error: Refers to a location that is unavailable
http://jthys.wordpress.com/2013/02/20/dfs-mapping-error-refers-to-a-location-that-is-unavailable/
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
It’s simple enough to use a tool like ROBOCOPY or the File Server Migration Tool (FSMT) to copy your previous created folders over to the new name space
\\networkdrive.
Robocopy
http://technet.microsoft.com/en-us/library/cc733145.aspx
Microsoft File Server Migration Toolkit 1.2
http://www.microsoft.com/en-us/download/details.aspx?DisplayLang=en&id=10268
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can we convert Scheduled tasks in Windows 2003 to Windows 2008 Automatically

Can we convert Scheduled tasks in Windows 2003 to Windows 2008 Automatically. what is the simpler way to convert it

... so migration of scheduled tasks from windows 2003 to windows 2008 is not possible.
sainath anal
If that is true, then what is the following TechNet article discussing?
http://technet.microsoft.com/en-us/library/dd363704(v=ws.10).aspx
Excerpt:
Task Scheduler Backward Compatible Module Status
Applies To: Windows Server 2008 R2
The backward compatibility module is used by Task Scheduler to register and run tasks that were created to run on Windows Server 2003, Windows XP, and Windows 2000.

Error while publishing Lightswitch application remotely from Windows 7 PC to Windows 2003 Server having IIS 6.0

I am trying to publish a LightSwitch 2012 application as Web Application from Windows 7 PC to Windows 2003 IIS server, .Net Framework 4.0
The publish Summary as follows
Application Name - User Test
Application Version - 1.0.6.0
Application Type : Browser
Application Server : IIS Server
Authentication : Windows Authentication
Database : Do not publish
Error details while publishing with the option "IIS server has lightswitch deployment prerequisites installed".
============================================================================
102 Web deployment task failed. (15/04/2014 16:24:51) An error occurred when the request was processed on the remote computer.)
(15/04/2014 16:24:51) An error occurred when the request was processed on the remote computer. The entry type 'unknown' was not expected at this time. The serialization stream may be corrupted.
When published without the option "IIS server has lightswitch deployment prerequisites installed".
the applications publishes successfully, But when the application is accessed from Browser it says authentication error.
I have searched a number of blogs with the same issue, but none have answered.
Any help will be highly appreciated.

I am once again facing the same issue when trying to publish remotely. But I have done nothing to the server after successful publishing as suggested below,
Not sure why the issue persists again (Could this be a firewall issue?) . Your help will be much appreciated.
[5952] MsDepSvc.exe Error: 0 :
[5952] Tracing deployment agent exception. Request ID '964acec1-797b-47c2-a4b6-3c872fc9b7ed'. Request Timestamp: '05/12/2014 09:45:31'. Error Details:
[5952] Microsoft.Web.Deployment.DeploymentException: The entry type 'Unknown' was not expected at this time. The serialization stream may be corrupted.
[5952] at Microsoft.Web.Deployment.PackageDeserializer.ReadChildren(Int32 parentId, Boolean bufferIfNeeded)
[5952] at Microsoft.Web.Deployment.SerializationProvider.<GetChildProviders>d__0.MoveNext()
[5952] at Microsoft.Web.Deployment.DeploymentObject.<GetChildrenWithoutAz>d__9.MoveNext()
[5952] at Microsoft.Web.Deployment.DeploymentObject.<GetChildren>d__0.MoveNext()
[5952] at Microsoft.Web.Deployment.DeploymentSyncEnumerable.<Create>d__0.MoveNext()
[5952] at System.Collections.Generic.List`1..ctor(IEnumerable`1 collection)
[5952] at Microsoft.Web.Deployment.DeploymentSyncContext.SyncChildrenOrder(DeploymentObject dest, DeploymentObject source)
[5952] at Microsoft.Web.Deployment.DeploymentSyncContext.SyncChildren(DeploymentObject dest, DeploymentObject source)
[5952] at Microsoft.Web.Deployment.DeploymentSyncContext.ProcessSync(DeploymentObject destinationObject, DeploymentObject sourceObject)
[5952] at Microsoft.Web.Deployment.DeploymentObject.SyncToInternal(DeploymentObject destObject, DeploymentSyncOptions syncOptions, PayloadTable payloadTable, ContentRootTable contentRootTable)
[5952] at Microsoft.Web.Deployment.DeploymentAgent.HandleSync(DeploymentAgentWorkerRequest workerRequest)
[5952] at Microsoft.Web.Deployment.DeploymentAgent.HandleRequestWorker(DeploymentAgentAsyncData asyncData)
[5952] at Microsoft.Web.Deployment.DeploymentAgent.HandleRequest(DeploymentAgentAsyncData asyncData)
Finally, I Could able to resolve the issue. I have identified the below information for a successfull deployment
1. Light switch 2012 application can be published only with Web Deploy 1.1 (which will create Web Deployment Agent Service) in Windows Services list. I had an issue with multiple Web Deploy versions (Web Deploy 2.0, 3.0) which caused to fail the publishing
from Light Switch Development environment. Un-installed all the versions and installed only Web Deploy 1.1 and then published successfully
2. You should use Remote Publish from Light Switch 2012 Development PC as there is no option in IIS 6.0 to import the Package in IIS 6.0 with the packages files similar to the option available in IIS 7.0 and later.
3. You should be able to publish from Light Switch 2012 environment with the option "IIS server has lightswitch deployment prerequisites installed" checked. The application will publish with the option unchecked but it will not work.

UDI OSD Task Sequences started failing with 0x80070002 error in SCCM 2012

This is kind of long, but here goes...
We built a UDI task sequence in SCCM 2012 (with MDT integration) that we were testing for deployment of a couple of different Win7 images. We customized the UDI experience thru the UDI wizard and XML file and OS deployment worked as expected
thru the task sequence (testing on Hyper-V VMs). Recently, this UDI TS started failing with error 0x80070002 during what appears to be the "Use Toolkit Package" step. This is after the OS image has already been laid down and after the ConfigMgr
client has been installed/configured. The SMSTS.log reports "Failed to open the task sequence key HKLM\Software\Microsoft\SMS\Task Sequence. Error code 0x8007002" Among other errors...I will post the entire log below...
After the error during deployment, Win7 will boot normally, however, you have no network connectivity and it appears the proper network driver didn't get loaded in the OS. Combine this with the fact that the TS should have joined the machine to our domain,
but you can't login because no network.. Im not sure if the network issue is a product of the TS failing early or the actual cause of the TS failure.
Anyway, I attempted to build another UDI task sequence using the same boot image and toolkit/settings packages, but am experiencing the same error during deployment. We have a few OSD task sequences built without UDI and those all still work just fine.
So, I am at a loss for where the root problem lies. Any suggestions or assistance would be greatly appreciated.
Here is the entire SMSTS.log and BDD.log...
https://skydrive.live.com/redir?resid=D65B1C4362892A26!110&authkey=!AKu5mOvDsXaEgvc
Thanks
Richie Tenhet

your failure does appear to be network (driver or otherwise) or dns related and it cannot contact the management point FQDN just around the time where it should download and execute the
Use Toolkit Package step...
"Starting Task Sequence Engine . . . "
"Non fatal error 0x80072ee7 in sending task sequence execution status message to MP"
"Start executing an instruciton. Instruction name: Use Toolkit Package. Instruction pointer: 83"
"unknown host (gethostbyname failed)"
"sending with winhttp failed; 80072ee7"
"Tried all the available http based locations. SMB based locations will be attempted now."
"Failed to resolve the source for SMS PKGID=P0100015, hr=0x80070002"
"Failed to run the action: Use Toolkit Package.
The system cannot find the file specified. (Error: 80070002; Source: Windows)"
that said, check that the package referenced above actually exists and is the correct source version on your distribution points, also verify (press F8 and check can you ping the FQDN of your management point) that you have network connectivity
around the time of the failure.
Step by Step Configuration Manager Guides >
2012 Guides |
2007 Guides | I'm on Twitter > ncbrady

Error 0x80070002 when Task Apply OS has "Access content directly from the distribution point" checked

When I check "Access content directly from the distribution point" for the "Apply Operating System" task in my OSD Task Sequence, I get the failed error 0x80070002 at the step when running the sequence from WinPE.
If I uncheck it, I don't get that error or have any problems.
I've ensured that in the properties of my OS Image in the Data Access that "Copy the content in this package to a package share on distribution points" is checked, and that I Updated DPs.
Am I missing any other settings?
The reason I'm trying to do this is because the "Download" speed of the WIM is incredibly slow. I already installed a hotfix (KB2905002) that fixed this for my Dell systems, but it's not speeding it up for another computer model I'm imaging in
the same way. The Dell computers, after I installed the server hotfix, will downloading the .wim file at 1% per second. However the HP thin clients I'm imaging download at about 1% every 15 seconds, and I'm not sure if that's due to their hardware or what.

Hi,
The error means file not found. So you need to check the smsts.log to see which DP it is accessing, then go to that DP to check the Shared Folder smspkg to make sure the file is there.
For the download performance issue, there are various reasons. You need to check your Switch bandiwidth and if the NIC driver is up to date. If downloading locally is slow, Accessing directly could be slow too.
Juke Chou
TechNet Community Support

Failed to run task \Microsoft\Windows\WS\License Validation. Error Code: 0x80041326

Today I noticed this message in the event viewer:
Event ID: 16387Severity: ErrorSource: Microsoft-Windows-Security-SPPLog: ApplicationMessage: Failed to run task \Microsoft\Windows\WS\License Validation. Error Code: 0x80041326
Does this mean the free eval use version of Windows Server 2012 has expired?
OS: Windows Server 2012 RC Build 8400
Thanks

Hello Darrell:
Thank you for responding to my issue. Here is the output you requested:
Windows Script Host
Software licensing service version: 6.2.8400.0
Name: Windows(R), ServerDatacenter edition
Description: Windows(R) Operating System, RETAIL channel
Activation ID: c3dbac02-e65b-48bc-a61e-e14befbdd674
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 03612-01333-001-000805-00-1033-8400.0000-2382012
Installation ID: 090195464127466880553502868392878303995792363977152161148874086
Use License URL: https://activation.sls.microsoft.com/SLActivateProduct/SLActivateProduct.asmx?configextension=Retail
Validation URL: https://validation.sls.microsoft.com/SLWGA/slwga.asmx
Partial Product Key: 78KXV
License Status: Licensed
Evaluation End Date: 1/15/2013 3:59:59 PM
Remaining Windows rearm count: 1000
Trusted time: 9/15/2012 3:37:56 PM
OK
Your request for info got me thinking about another oddity I've been working on this week - My firewall (NetGear SRX5308) shows dropped incoming packets from ip 65.55.121.94 with source port 443 and destination port 55338. ARIN shows the ip belongs
to MICROSOFT-1BLK, aka Microsoft. Is it possible that my firewall is blocking communication to MS's licensing servers?

I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy

When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?

When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?

after perusing other subjects with playback issues:
this is the fix:
-Launch Control Panel - Double click Quicktime, If you do not see quicktime, look on the top left side of control panel and switch to classic view. This will then allow you to see Quicktime.
-Now click the advanced tab and click on Safe Mode GDI Only, Apply, then ok.

Error in OSD Task from Windows XP to Windows 7

Similar Messages

Maybe you are looking for