Error in outbox folder

Today, when I send emails I receive an 'Error' message that says:
This message could not be delivered and will remain in your Outbox until it can be delivered.
The sender address [email protected] was rejected by the server
This seem to happen when I'm sending an email to one of my contacts (sbcglobal.net), but not always. It's really weird!!!!! Other times I have no problem at all. Does anyone know what causes this and how to fix it? I appreciate your suggestions.
Thanks!
iMac G5, MacBook 2.0   Mac OS X (10.4.6)  

You're welcome.
This rarely when it does not work is likely a problem with your ISP - especially with SBC/now AT&T.
Using 587 instead of 25 for the Server Port with .Mac's authenticated SMTP server may help but using SBC's SMTP server to send messages with your .Mac account when connected to the internet via SBC at home should eliminate the rarely when using .Mac's authenticated SMTP server does not work.

Similar Messages

  • Can't install itunes - error message  "the folder "itunes" cannot be found

    Help. I just bought a new Iphone and can't get itunes to load. I had itunes on my computer for several years for my nano - haven't synced up in about a year. Went to open it and got the following error message
    The folder "itunes" cannot be found or created and is required. The default location for this folder is inside Mu Music folder"
    I have uninstalled everything - quicktime, apple mobile, every single file. I have rebooted, run searches to make sure there were no files at all left - did it through control panel, search etc., rebooted and downloaded it again (this make about 5 times now) and still get that same message that the folder cannot be found. Help! I just blew about $400 in the Apple store!
    Can anyone help me?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • I'm getting the error message "Photos folder syncing has been disabled for the iPhone my iPhone because the folder "Pictures" cannot be found."

    I'm getting the error message "Photos folder syncing has been disabled for the iPhone <my iPhone> because the folder "Pictures" cannot be found." lately.
    Normally, all I do with photos is move them from my iPhone to my computer's (Windows 7) hard drive. I do this by connecting the iPhone with the cable, a box pops up on the screen asking me what I want to do, and I choose "Import pictures and videos". I've previously selected the "delete photos from the device after move" option (or however it's worded...), simply because I don't want this device to fill up with photos.
    Lately, it has been importing the photos fine, but it won't delete them from the iPhone. This used to work just fine, now it doesn't work and I don't know what changed, if anything. In iTunes, I get the error message I list at the beginning of this message.
    How do I fix this?

    Hi there scarbo59,
    You mentioned that you are still able to import without issues, but you may still want to run through the troubleshooting steps outlined in the article below. 
    iOS: Unable to import photos to computer
    -Griff W. 

  • Trying to uninstall or repair get an error message: The folder path 'My Music' contains an invalid character.

    Trying to uninstall or repair get an error message: The folder path 'My Music' contains an invalid character. How do I fix?

    Try the following user tip:
    "not a valid short file name" and "invalid character" install errors

  • IPOD Updater - Error 1324 - The Folder path contains an invalid character

    I tried to install ITUNES on an external HD (I didn't want to slow down my computer by putting all of my music on my internal HD). ITunes installed and then crashed. I removed all traces of ITUNES and IPOD that I could find and went to install ITUNES again on my regular internal drive. Now it goes through the installation and REMEMBERS my IPOD serial number (so obviously I can't find all of the files to remove) but doesn't give me a choice of where to install (it still must be trying to install to my external HD) the ITUNES. All I get is the following Error message:
    IPOD Updater - Error 1324 - The Folder path "Program Files" contains an invalid character
    Does anyone have a solution out there?
    Thanks in advance!
    MonsterProb

    IPOD Updater - Error 1324 - The Folder path "Program Files" contains an invalid character
    Interesting. It's choking on the old iPod updater application. (iPod software updates are no longer handled by a standalone application ... that function was folded into iTunes beginning with iTunes 7.0.0.70.)
    Let's try the following procedure.
    Download and install the Windows Installer CleanUp utility:
    Description of the Windows Installer CleanUp Utility
    Now launch Windows Installer CleanUp ("Start > All Programs > Windows Install Clean Up"), find any entries called "ipod for windows \[date]" or "ipod updater \[date]" or just "ipod for windows" in the list of programs in CleanUp, select those entries, and click “remove”.
    Quit out of CleanUp, and restart the PC.
    Does an itunes install go through properly after that?

  • Error Message:The folder path 'Program Files' contains an invalid character

    I have an 80G iPod. I never had a problem with the itunes program until I switched to Vista. When I try to open iTunes I get the following error message:
    *The folder path 'Program Files' contains an invalid character*
    I have itunes installed on both my HP and on an external hard drive that I use as my backup in case something goes wrong. Neither one opens and I get the same error message on both. I have tried to uninstall iTunes and then reinstall and get the same message so I can't uninstall.
    I'm really frustrated, I need to get to my music for a huge presentation in a few days. Can anyone help?
    Thanks in advance,
    Jejo

    Have you tried working through the steps in the General section of this article?
    http://support.apple.com/kb/HT1926

  • Error 1324: the folder path 'webi/' contains an invalid character

    Hi pros,
    I am getting this error when trying to install bobj xi 3.1 client version. the service pack is zero.
    however, i previously had bobj xi 3.1 server / client components installed and bobj 4.0 client tools.
    i uninstalled bobj 4 and bobj xi 3.1 server components from control panel. also, deleted them from registry.
    still i am getting the above error.
    kindly advise.

    Hi,
    Can you please check the following thread which is for the exact same question :
    error 1324: the folder path 'webi/' contains an invalid character
    Regards
    Steph

  • Error message: The folder (you are trying to move) contains the catalog

    II am trying to move a catalog to an external HD. I am getting an error message: The folder (names folder) contains your LR catalog and cannot be moved while LR is running.
    How can i move the folder within LR without LR running or if I move the catalog out of the folder in MAC Finder, will it impact the synchronicity of the file pATH? Where should the folder containing the catalog be kept? I keep some separate catalogs by year because of the amount of photos that they contain and I "store the catalog file within the LR folder on the HD

    Copy the catalog with Finder to the external. Copying the previews also is optional because if you don't LR will make new ones, but copying over the Previews.lrdata folder to the same location will save time. This is done with LR off. Now double click on the external catalog .lrcat file and LR will launch. After verifying that the new catalog is functioning properly, you can delete the old one from the internal.

  • How to create inbox and outbox folder in java mail

    i have to get mails to my inbox and the sending mails in outbox folder. what i have to do. i need clear information regarding this with examples.

    You can start by asking in the JavaMail forum, where you're
    more likely to find somebody who can answer your question...

  • Shared mailbox outlook 2013 sent mail sitting in outbox folder

    Hi guys,
    I am hope you might be able to assist. 
    I have users who access a shared mailbox (primary mailbox) as delegates with full permissions and send as permissions. They also have a nested mailbox which is their own personal mailbox. Mail sends from both mailboxes and when it behaves mail gets delivered
    to the sent item of the sender. But on a common recurrence mail sits in the Outbox of the delegate mailbox when sent from that mailbox. They can hit send/receive and it will force mail to send and also mail can delay for several minutes at times. This is also
    seen in OWA.
    Removing the nested mailbox and adding it as a additional mailbox allows mail to flow without issue but mail sent from the additional mailbox gets placed in the sent items of the primary mailbox. Client would prefer the sent items to be kept separate (tried
    DelegateSentItemsStyle).
    The exchange is a Exchange 2013 VM server and the client's use remote desktop services to access the platform. Also each Windows mail client is configured to use HTTP and cache mode is disabled for remote services. Last applied update was on the 08/2014.
    Your help will be greatly appreciated.
    PJ

    Hi,
    From your description, when you send a message from shared mailbox, the message is sitting in Outbox folder. I have seen some people have this issue, it is recommended to run Outlook using Cached mode as a workaround.
    Hope this can be helpful to you.
    Best regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Amy Wang
    TechNet Community Support

  • Java.lang.IllegalStateException: INTERNAL ERROR: Global root folder for pre-installed component archives not defined.

    Hi Gurus,
    I am working on NWDS 7.01.00 after opening NWDS, I am getting this error. My error log file is:
    java.lang.IllegalStateException: INTERNAL ERROR: Global root folder for pre-installed component archives not defined.
    at com.sap.tc.devconf.impl.DevConfFileSystemLayout.getRootPathForCompartment(DevConfFileSystemLayout.java:202)
    at com.sap.tc.devconf.impl.DevConfFileSystemLayout.getAbsoluteSCRoot(DevConfFileSystemLayout.java:76)
    at com.sap.tc.devconf.impl.DevConfFileSystemLayout.getAbsoluteTopLevelDCsRoot(DevConfFileSystemLayout.java:169)
    at com.sap.tc.devconf.impl.LocalSCNode.initializeTopLevelDCNodeList(LocalSCNode.java:41)
    at com.sap.tc.devconf.impl.LocalSCNode.<init>(LocalSCNode.java:24)
    at com.sap.tc.devconf.impl._Factory.createLocalSCNode(_Factory.java:385)
    at com.sap.tc.devconf.impl.DevelopmentConfiguration.getTopLevelDCsForLocalCompartment(DevelopmentConfiguration.java:3415)
    at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB._initializeLocalEntries(ComponentSyncDB.java:788)
    at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB.initializeLocalEntries(ComponentSyncDB.java:759)
    at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB.initialize(ComponentSyncDB.java:436)
    at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB.retainEntriesFromCompartment(ComponentSyncDB.java:824)
    at com.sap.tc.devconf.impl.LocalDCScanner.refreshSyncDBForLocalDCs(LocalDCScanner.java:103)
    at com.sap.tc.devconf.impl.DevelopmentConfiguration.<init>(DevelopmentConfiguration.java:378)
    at com.sap.tc.devconf.impl._Factory.createDevelopmentConfiguration(_Factory.java:354)
    at com.sap.tc.devconf.Factory.createDevelopmentConfiguration(Factory.java:103)
    at com.sap.tc.devconf.DevelopmentConfigurationFactory._addConfiguration(DevelopmentConfigurationFactory.java:2062)
    at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:761)
    at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:696)
    at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:667)
    at com.sap.ide.eclipse.component.devconf.DevConfManager.createDefaultDevConf(DevConfManager.java:341)
    at com.sap.ide.eclipse.component.devconf.DevConfManager.getInstalledDevConfs(DevConfManager.java:442)
    at com.sap.ide.eclipse.component.devconf.DevConfManager.initializeDevConfs(DevConfManager.java:135)
    at com.sap.ide.eclipse.component.devconf.DevConfManager.initializeDevConfs(DevConfManager.java:109)
    at com.sap.ide.eclipse.component.provider.ComponentProviderPlugin$1.run(ComponentProviderPlugin.java:82)
    at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
    at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:98)
    at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:1999)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1733)
    at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
    at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
    at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
    at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
    at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
    at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
    at com.sap.ide.eclipse.startup.Main.main(Main.java:607)

    Maybe some plugins are missing. Try reinstall the latest version of the nwds that matches to you server version.
    http://wiki.scn.sap.com/wiki/display/Java/NWDS+Download+Links

  • Anyone know why i cant upgrade to newer version of itunes , its coming with an error "ITUNES64.MSI FOLDER containing the installation package is missing ??

    anyone know why i cant upgrade to newer version of itunes , its coming with an error "ITUNES64.MSI FOLDER containing the installation package is missing ??Ive tried unistalling previous version but same message comes up

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Error 30502: The folder ID does not exist

    When I use the Category and Perspective drop down select boxes on
    the navigation bar, I receive an error message: "Error 30502: The
    folder ID does not exist.
    I have checked. I do not have any invalid packages.
    Any ideas?

    Pls try posting in Portal > Content Area forum.

  • Email WONT send - sits in outbox folder

    For some reason, although I can send email, my outgoing emails will NOT send - instead they stay in the outbox. Any idea how to fix?! THX!

    Hi and Welcome to the Community!
    Please clarify this confusion:
    Your subject line - "email WONT send - sits in outbox folder"
    Where you say -- "although I can send email"
    And finally where you say -- "my outgoing emails will NOT send - instead they stay in the outbox"
    So that's two votes for failure, and one for success. Can you clarify please?
    Thanks!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • E-mails stuck in Outbox folder

    Hi,
    we have more then 10.000 users with associated Exchange mailboxes in our organization. System is based on Exchange 2010 and Outlook 2007/2010. 95% of all users have the latest Office Service Pack.
    50-60% of users have very strange problem: a couple of already sent mails are stored in Outbox folder too. Users with Outlook in Cached mode cannot see stucked mail in Outbox folder. Users with OWA Access or Outlook Online (withoud cached mode) can see it in
    Outbox. It's not acceptable to change their Offline mode into Online and manually delete mails --> we need something smarter.
    Can you please help me with this issue?
    thank you in advance.
    regards!

    Hi,
    According to your description, the sent email is randomly stuck in the outlook with online mode. Thus, the issue may be related to performance. We can use performance monitor to check it:
    http://technet.microsoft.com/en-us/library/dd335215(v=exchg.141).aspx
    And it’s not recommended to use online mode for all users which can bring performance  issue.
    Additionally, we can use retention policy to delete messages in outbox:
    Understanding Retention Tags and Retention Policies:
    http://technet.microsoft.com/en-us/library/dd297955(v=exchg.141).aspx
    Apply a Retention Policy to Mailboxes:
    http://technet.microsoft.com/en-us/library/dd298052(v=exchg.150).aspx
    please note that it may bring the risk of deleting some emails that haven’t sent out.
    Thanks,
    Angela Shi
    TechNet Community Support

Maybe you are looking for

  • Write a simple string to a file.

    I have a string that is formatted with new lines that I want to write to a file as is. I have not been able to create a File Partner Link that can successfully write the content. The opaque approach creates an empty file. I have tried defining a new

  • ITunes consistently crashing

    My iTunes will open and crash shortly there after. itunes is the latest version, even after a repair, then a full re-instalation. Tried the ".dll" fix. I am at a loss. Please internet, you're my only hope. Running on Windows 7 64bit.

  • BAPI for approving service entry sheets

    Hi All, I want to approve a service entry sheet I am using the BAPi - BAPI_ENTRYSHEET_CREATE, I am able to create a service entry sheet but unable to approve it. Please let me know if there is a BAPi- for approving a service entry sheet. Regards Shiv

  • Firmware error for he muvo2FM pla

    I bought the player from the store when I already charge the battery and try to upload the music to the player the problme is happen it show the firmware error and then go to the recovery page I try formatting the disk but it's not work also clean up

  • A Simple Call Method

    Hello I have my program correctly configured and it has no errors,now all I want to do is call this boolean method to main so it will execute What must I add to my main method to call this boolean function... private static boolean iCheckIfPalindrome