ERROR IN OUTPUT WITH CONDITIONS IN SMARTFORM

I have two conditions in smartform.
if i_final-konrth NE g_temp9.
i_final-ssign eq g_temp10.
then we need to print text1 in the output. There are no program lines in the text.
g_temp9 and g_temp10 are passed from the program. text1 is not getting outputted. Could anybody help in this issue ?

hI,
i have written break username in program lines but the cursor is not stopping. please tell me why

Similar Messages

Error writing output with iview for xml form builder

Hi,
I created a Xml Form Builder's project in which I developed an "Edit" and "ListEdit" sheet.
I also created an iview for theese in which the code link is:"com.sap.km.cm.xmlform",and the field for Style Sheet for List and for single item are set up correctly,but when I tried the preview the following error message happened:
com.inqmy.lib.xsl.xslt.XSLOutputException: Error writing output. -> org.w3c.dom.DOMException: Root Element is already present, cannot be appended as a child.
could someone help me?
thank's a lot!
Nick.

Hi,
Now I'm confused,what do you mean with create new data? Are users editing existing documents
(as if they go to a document example.xml > edit) or they are creating new documents (as if they go
on folder > new > forms)?
The problem is, in both cases a user would need read/write permissions.
The normal flow content (data) is created in KM is as follows:
1. user is assigned to a role
2. role contains KM Navigation iView
3. KM Navigation iView executes com.sap.km.cm.navigation component
4. user chooses New > Form UI command (edit_xml_forms)
5. edit_xml_forms UI command executes its code (com.sapportals.wcm.rendering.uicommand.cm.UIXMLFormsCreateCommand) and open xml edit for the user
6. user fill the form and click Save, form is created into folder
For what I understood so far, your requirement basically asks you to go directly to step 5, it is
possible to pass a URL that goes directly to step 5, the UI command button, but if you do that
you won't have a context, so chances that it will work are slim, since a context is required to
fill the parameters asked by the app (like folder, user, permissions, etc). Even though, in some cases you can
still pass the parameters via post in the URL but you must know which service/parameters the
app asks for it, also a URL is static...
That was the create scenario, I think it's more cons than pros, users would still be
able to bypass the URL iView created for that, I'd suggest evaluating again if it's really
a problem having users access cm to manage data
kind regards,
Rafael

Getting an error when outputing with Autocad

I have the latest Adobe viewer installed 10.1.1. Yet I get an error when trying to output to a PDF. It wasn't always this way.
error is; "No PDF viewer installed"
Please help

Mac or Win? Can you open Reader? In any case, you cannot create PDFs with Reader, which is, well, very little more than a reader of PDF files.

PDF output with conditional text

I need to create two PDFs from my project, each displaying a different conditional build expression, but I can't figure out how to do it. Selecting PDF Output doesn't show options like, for example, WebHelp does, unless I've missed something in the setup. Is this possible? My reviewers want to review hardcopies although I've tried to convince them that they should look at it as it will be displayed online.

Hi there
See if the video linked below helps.
Click here
Cheers... Rick

External Drive Disk Erase Failed with the Error Input/Output Error

I have 2 hard drives in an external FW800 enclosure that I am unable to format. When I go to initialize the drives in Disk Utility, I get the following error message: "Disk Erase failed with the error: Input/output error."
The drives show up in Disk Utility, but I can't repair them (that option is grayed out). Disk Utility correctly ID's the manufacturer of the drives (Maxtor), their size (200gb each), so it's obviously seeing that the drives are there. But it won't let me format them.
The drives are new, by the way; they don't have any data/files on them. I have Disk Warrior, but the drives don't show up there to be repaired -- probably because they aren't formatted yet.
After looking at other posts, I tried switching the jumper settings around on the drives -- from Master/Slave to cable select and back again, but it didn't help. I also tried doing a zero erase (even though the drives are new), zapping the PRAM -- again, no help.
One question I had is whether this could be a bad FW800 cable? The cable is new -- it came with the enclosure, which is an OWC Dual FW 800 enclosure. Other than that, does anyone have any other thoughts about what's causing this? Any help would be greatly appreciated.
Matthew

SOLUTION!!!!
I had the exact same problem. I have the original 20 GB hard drive that came in my Powerbook G4 550MHz and a couple of years ago I traded up for a 60 GB drive and bought a FW/USB enclosure for my original drive to use it to backup my important files. I hadn't backed up in over a year (shame on me!) and I decided maybe I should erase the drive and start from scratch. It was connected via USB.
At that point DiskUtility gave me the exact same Input/Output error. I tried partitioning the drive into 1 or more partitions but came up with the same error. I couldn't figure out what was wrong so I decided to startup in OS 9.2.2, I did that and let it start up, then plugged in the hard drive and it gave me the standard "This disk is unrecognizable, do you want to eject or erase?" so I clicked Initalize. It worked!
Just make sure you choose the MacOS Extended option when initializing out of OS 9 (instead of the MacOS Standard option) so it can be read and viewed in OS X.
If your computer is too new to be able to boot from an OS 9 folder on your drive or an OS 9 CD, then see if a friend or a local library has older computers that are running OS 9 or can boot from it. If not let me know and you can send me your drive and I'll reformat it.
Kind of crazy...I haven't used the OS 9 partition on my HD in YEARS...was even thinking about erasing it since I don't use any Classic applications anymore...good thing I didn't!
Nick
Powerbook G4 550Mhz Mac OS X (10.4.6)

App-V PowerShell: Script to Query XenApp Servers for App-V Publishing Errors and Output an Excel Document with the Results

Please Vote if you find this to be helpful!
App-V PowerShell: Script to Query XenApp Servers for App-V Publishing Errors and Output an Excel Document with the Results
Just posted this to the wiki:
http://social.technet.microsoft.com/wiki/contents/articles/25323.app-v-powershell-script-to-query-xenapp-servers-for-app-v-publishing-errors-and-output-an-excel-document-with-the-results.aspx

Hi petro_jemes,
Just a little claritification, you need to add the value to the variable "[string]$ou", and also change the language in the variable "$emailbody" in the function "Get-ADUserPasswordExpirationDate".
I hope this helps.

V-41 tcode error :Table 304 is not defined for use with condition type PR00

Hi All,
I am trying to create a BDC using the transaction V-41.
The first screen has fields:
ConditionType and Table, where I have to fill values ZPM1 and 800 respectively.
But as soon as I enter the tcode v-41 and say enter, the above mentioned fields are already having the values 'PR00' and ' 304'. Normally if you take an example fo t-code VA02, all fields are blank.
Then an error message is displayed:
Table 304 is not defined for use with condition type PR00
This behaviour is not allowing me to use the BDC feature.
Please advise me on why this is happening. What are the possible solutions I can use to clear these values programmatically?
Can anything be done via customizing?
Regards,
Namita.

Dear ILHAN ,
Well the problem you are facing is having the following solution:
Table 304 is not defined for use with condition type PR00
Message no. VK024
Diagnosis
The selected condition type does not fit in the condition table, that is the basis for the condition record. Alternatively the selected condition type is not included in the condition types that were selected on the selection screen or that are defined in the variant of the standard selection report.
Procedure
Úse F4 help to choose a valid condition type.
If this does not give you the required condition type, check in Customizing for condition types and the related access sequences.
In the condition maintenance also check Customizing for the selection report (pricing report), that you have selected in the navigation tree, using the standard condition table as a reference.
I hope this helps.
It has worked for me.
I gave it a try and what I am getting using the transaction V-41 is create Price condition (PR00) : Fast Entry.
Please award points if you find it useful.
Regards,
Rakesh

Partition failed with error input output

Hi All,
I installed a new hard drive (WD 500G) into my 2006 Macbook, Mac OS X 10.4.10. I also increased the RAM to 2G. My Macbook reconized the hard drive. However, I followed the steps below to format the HD, but got the partition failed with error input output msg.
1. Went to Disk Utility, selected the name of new hard drive in the sidebar.
2. Select the Partition tab, and selected 1 partition from the drop down menu.
3. Click Options, then choose GUID .
4. Select Partition
In previous posts someone suggested updating the softward to 10.4.11 or the erasing the HD, but erasing the hard drive would take 13 hours according to my Macbook. Any suggestions? Please Help!

The error usually means the drive is bad. But you can try this:
Erase and Install OS X
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting has finished quit DU and return to the installer. Install OS X.

Pricing error with condition type HI02

Hi Friends,
I have problem in pricing procedure for customer hierarchy condition type HI02. I have created the condition node i.e.6222 and assigned customer 1500 and i also maintained the condition record for the same and also put in the pricing procedure as well. Now while i am creating sales order the condition type HI02 is not coming automatically rather i am able to put the same manually. I want the system should pick the condition type HI02 automatically. Please suggest me IMG setting which i sould maintain for customer hierarchy pricing.
Thanks in advance,
Bharat B

Dear Barath
You are right
HI02 is a item condition type only used for customer hierarchy discounts and the access sequence for the same is HI02 with condition table 065 that is customer hierarchy/material and the same is positioned in V/07 in the access sequence details in seven consecutive steps (the same condition table in all the seven steps) but the field in each table differing
The field in table 065 which is positioned in no 1 is HIENR 01
The field in table 065 which is positioned in no 2 is HIENR 02
The field in table 065 which is positioned in no 3 is HIENR 03
and the most important thing here is exclusive indicator ticked in all the steps exept the seventh step
That means if at hierarchy level 1 system finds a record then it stops searching
I have a feeling that your access sequence alignmemt must be wrong somewhere and check for exclusive indicator marking
HI01 is a item condition type only used for customer hierarchy discounts and the access sequence for the same is HI01 with condition table 064 that is customer hierarchy and the same is positioned in V/07 in the access sequence details in seven consecutive steps (the same condition table in all the seven steps) but the field in each table differing
The field in table 064 which is positioned in no 1 is HIENR 01
The field in table 064 which is positioned in no 2 is HIENR 02
The field in table 064 which is positioned in no 3 is HIENR 03
and the most important thing here is exclusive indicator ticked in all the steps exept the last step
That means if at hierarchy level 1 system finds a record then it stops searching
I have a feeling that your access sequence alignmemt must be wrong somewhere and check for exclusive indicator marking
Moreover importantly if there is condition type in a PP then if a condition record is maintained if the same is not picked up in sales order then analysis has to give some hint and what is the hint you are getting
Regards
raja

BPE Error with condition in block

Hello to all,
I've got following BPE - scenario:
1. Receive
Block with condition ( Cond_Var CP "*BLA*")
Branch 1: Transformation step, send step
Branch 2: send step.
End block
From time to time the Cond_Var contains the pattern BLA but still branch 2 is executed, instead of branch 1, althouh branch 2 is the correct one.
If I restart the message from the scratch branch 1 will be executed.
What's the problem?
Regards Christian

Hello,
I've found the problem. Sometimes the wrong receiver determination is taken, due to a bug in message packing.
Have a look at note 1163661.
Best regards
Christian

Getting Runtime error while adding Second page in Smartform.

I added 2 pages in smartform. When I worked with single page. smartform working properly. Now I added one more page(i.e Second page) I am getting runtime error. ("The current ABAP/4 program encountered an unexpected
situation". A RAISE statement in the program "SAPLSTXBC" raised the exception
condition "ERROR".) When I debug this standard program Something width problem getting on line number 110. Both width not matched so program raising exception. Can you please tell me to solve this problem what changes will I do in my smartform?

Please let me know the details of each page.
Error can occur in these cases.
1) You copied the first page to second. and later you change the width of second page
2) You created the second page and there is template in second page. each column width is not matching with the total width of the template.
3) windows width is greater than the page width
Please have a look.
Regards,
Nikhil
Edited by: Nikhil V Kumar on Jul 27, 2010 12:16 PM

Problem with Print of Smartforms

Hi Experts,
I am facing problem with the Smartforms related to purchase order and Request for Quotation.
when i see the print preview of these two forms the preview was coming correctly. But when i give the print the data in the footer was Truncted. I changed thepage from Letter to A4. Even then also i am facing the issue.
So can any one tell me where would be th problem.
Thanks & Regards,
Ramana

Dear Ramana,
there is no big issue in this just you have to
check the window at footer in which window(output option )
tick must be there at lines with
and always draw boxes and shading.
tamplet paramets must match to the window.
do this if still problem is there keep in touch
and send me the error of output.
pls keep in touch.
REWARDS expected.
vivek srivastava

Update termination Error : Maintain Output device in User master record

Hi All,
For transaction IW32 when print is given we have getting Update termination error : Maintain Output device in User master record.
I have set the user_settings = Space, for output_Options passed the output device . Even for control_paramters I have passed the device while calling the Smartform . However there is no use. Still I am getting the update termination error.
Please let me know how to solve this issue. Any OSS Note is there for this.
Thanks in Advance!
Regards,
Preethi G

Hi,
Thanks for the reply. There is no problem in the print program .
In the user master record , if the output device is not given and in the print program if we pass the output device. the error is coming.Is there any way to solve the issue at the print program level with out maintaining the user master.Please let me know.
Many Thanks!
Regards,
Preethi G

Quicktime Export Error: "An output module stopped responding."

I'm experiencing an odd export error whenever I use any Quicktime codecs:
"After Effects error: An output module stopped responding. The file may be damaged or corrupted. You may need to restart After Effects."
Similarly, Adobe Media Encoder hangs when outputting to Quicktime codecs. Neither program makes any progress at all before the hang occurs. At that point, I have to manually "end task" to exit. Also, it doesn't seem to matter what I try to export. In AME, for example, I can simply try to convert one video format to another and have it hang, so I don't think the problem is due to a problem with the source settings or effects. Also, I'm not attempting any multiprocessing since I don't really have enough RAM for that. Other output modules work, so I'm just exporting image sequences for the time being.
System specs:
Windows 7 64-bit
Intel i7-2600k processor
8 GB RAM
GTX 580 GPU
Software:
Adobe CS6
AE Plugins include Tracode Suite 12 and Optical Flares
Quicktime 7.7.3
Any thoughts on this? I've seen very few references to this error in other places, and not really found a solution that seems to apply to my situation. Thanks in advance for your help.
Josh

Thanks for setting me in the right direction. Clicking through to the 25 :: 101 error page (http://myleniumerrors.com/2013/01/06/25-101-4/) led me to a reference about other software, such as remote access software, using the same ports that AE needs for communication with its various processes. In my case, LogMeIn was the culprit. I had no idea that AE even used TCP for these types of operations, so that's very helpful to know.
*EDIT*
That worked temporarily, and now it doesn't work. I ran into a similar effect when I first disabled the Windows Firewall. But of course, as I type this and piddle around, it works again. It SEEMS like if I open AME and click into the output settings and scrub through the video preview, it makes everything work when I go to actually export. That's exactly the type of thing I would say is completely unrelated under normal circumstances, but at the moment all I know is that it is currently working and I don't want to test anything else until I finish the rendering I need to accomplish today. I'll work on it more later and post an update at that time.
Thanks,
Josh

How to bring output of report on smartform

Hi experts,
I want to display output of one std report on the smartform. Output of the Z report is using large no. of write statements. I want to create one smartform which displays output same as the output of report.
Is it possible to directly bring output of report on smartform??
Please give me solution
Thanks
Sameer
Edited by: sameer dhuke on Mar 17, 2008 6:53 AM

Hi,
To The best of my knowledge it is not possible directly.
You have to design the smartform with all the fields in the report.
And u have create the driver program for the Smartform or u can use the report as a driver program itself.
Then Call the smartform using FM SSF_FUNCTION_MODULE_NAME to call the smartform.
Regards
Sandipan

ERROR IN OUTPUT WITH CONDITIONS IN SMARTFORM

Similar Messages

Maybe you are looking for