Error in parsing data from instrument i/o assistant
I have used a GPIB card to talk with a HP53131 Counter. I tested the command in the Instrument IO Assistant, the data it reads back is good and never show a problem. But when I link output to text pallet or a chart, the data is wrong. I should get 5e6, it gives me 5e66. I can fix this by put a division in to data pipe-line. But the labview program has other errors too. for about 10-15% of the probability, Instrument IO Assistant outputs very high or low numbers like 55e66, or 0. Also fairly high interuption due to "GPIB scaning errors" (no less than 5% probability). Does anybody know such bugs from Instrument IO Assistant?
I used the same hardware and HP provided software in Excell. It can contiue take data for 1 wee
k and does not break. No error readings.
Thanks in advance
Regards
James
Tommy,
In the parsing window, I see the right number. But when it sends it out to other VIs, the number is wrong. I tested the assistant many times, I did not catch the error I saw outside. The VIs I used to check the Asistant are:chart, array (saved to file) and text box. All show the same wrong number if one does.
Attached is the VI I used to test and some saved data after divided by 1e60
Attachments:
hp53131a_test2.vi 133 KB
nitestdata.txt 2 KB
Similar Messages
-
Fatal error while fetching data from bi
hi,
i am getting following error while fetching data from bi using select statement
i have written code in this way
SELECT [Measures].[D2GFTNHIOMI7KWV99SD7GPLTU] ON COLUMNS, NON EMPTY { [DEM_STATE].MEMBERS} ON ROWS FROM DEM_CUBE/TEST_F_8
error description when i click on test
Fatal Error
com.lighthammer.webservice.SoapException: The XML for Analysis provider encountered an errorthanks for answering .but when i tried writing the statement in transaction 'MDXTEST' and clicked on check i am getting following error
Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System Response
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Procedure
Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
SO I WENT IN SM 59 TO CHECK THE CONNECTION.
CAN U TELL ME WHAT CONFIGERATION I NEED TO DO FOR MAKING SELECT STATEMENTS WORK? -
Implementing Database codes FAIL /error in parsing data into jsp page
Hi there,
I have this problem trying to build a portal application. I am using the JSPDynPage, jsp page and a bean to build a page.
I have this problem parsing data from JSPDynPage to the beans and to the jsp page.
I tested out the connection between the beans and the jsp page. There is no error parsing information from the beans to the jsp page.
So i tried to test out the codes for the database from the beans.
Will this work? Because it does not display the results i want.
I need an Solution asap to find out wad is wrong also also the correct codes to the database.
public String db(){
try {
InitialContext iC = new InitialContext();
DataSource dataSource = (DataSource)iC.lookup("java:env/jdbc/mySQL");
java.sql.Connection connection = dataSource.getConnection();
PreparedStatement st = connection.prepareStatement("SELECT name FROM test WHERE id='123'");
ResultSet resultSet = st.executeQuery();
while (resultSet.next()){
name = resultSet.getString("name");
name = name.toString();
connection.close();
return name;
} catch(Exception n){
e = "Exception";
return e;
This is the method i put in the beans to test out the database connection.
Thanks Loads
QuatreHi there,
Thanks for the reply, i thought that no one is going to reply me anymore. Thanks loads.
Bean Class name: Bean1
Bean Packeage name: Beans1
Bean id : myBean1
Jsp Codes
<%@ taglib uri="tagLib" prefix="hbj" %>
<jsp:useBean id="myBean1" scope="application" class="Beans1.Bean1" />
<hbj:content id="myContext" >
<hbj:page title="PageTitle">
<hbj:form id="myFormId" >
<hbj:textView id = "ll" text="lalalalalalalalalasasa" />
<%--
<hbj:textView id = "l">
<% l.setName(myBean1.getName());%>
</hbj:textView>
--%>
<hbj:textView
id="appraisal_yr_label"
text="Apprasial Year:">
</hbj:textView>
<hbj:textView id = "la" >
<% la.setText(myBean1.getName());%>
</hbj:textView>
</hbj:form>
</hbj:page>
</hbj:content>
Beans1.java
package Beans1;
import java.io.Serializable;
public class Bean1 implements Serializable{
private String name = new String();
private String e = new String();
private String year = new String();
public void setName(String name){
this.name = name;
public String getName(){
return name;
JSPDynPage
import Beans1.Bean1;
import com.sapportals.htmlb.*;
import com.sapportals.htmlb.enum.*;
import com.sapportals.htmlb.event.*;
import com.sapportals.htmlb.page.*;
import com.sapportals.portal.htmlb.page.*;
import com.sapportals.portal.prt.component.*;
public class testDBv5 extends PageProcessorComponent {
import Beans1.Bean1;
import com.sapportals.htmlb.*;
import com.sapportals.htmlb.enum.*;
import com.sapportals.htmlb.event.*;
import com.sapportals.htmlb.page.*;
import com.sapportals.portal.htmlb.page.*;
import com.sapportals.portal.prt.component.*;
public class testDBv5 extends PageProcessorComponent {
public DynPage getPage(){
return new testDBv5DynPage();
public static class testDBv5DynPage extends JSPDynPage{
private Bean1 myBean1= null;
private String name = new String();
public void doInitialization(){
try{
IntitialContext context = new javax.naming.InitialContext();
DataSource dataSource = (DataSource)context.lookup("java:env/jdbc/appDB");
Connection connection = dataSource.getConnection();
Statement stmt = connection.createStatement();
ResultSet rs = stmt.executeQuery("Select AppraisalYear From tblAppraisal Where AppraisalYear='2007'");
while(rs.next()){
year = rs.getString("AppraisalYear");
rs.close();
stmt.close();
connection.close();
return year;
}catch (Exception n){
n.printStackTrace();
IPortalComponentProfile profile = ((IPortalComponentRequest)getRequest()).getComponentContext().getProfile();
Object o = profile.getValue("myBean1");
if(o==null || !(o instanceof Bean1)){
myBean1 = new Bean1();
profile.putValue("myBean1",myBean1);
} else {
myBean1 = (Bean1) o;
Object value = request.getSession().getValue("myBeans1");
if (value==null || (value instanceof Bean1)){
myBean1 = new Bean1();
request.getSession().putValue("myBean1", Object value);
DataBase cn = new DataBase();
name = cn.dataBaseConnection();
myBean1.setName(name);
//name = "gir";
//myBean1.setName(name);
// IPortalComponentRequest request = (IPortalComponentRequest) this.getRequest();
//IPortalComponentContext myContext = request.getComponentContext();
//Bean1 myNameContainer = (Bean1) myContext.getValue("myBean1");
//myNameContainer.setName(name);
// fill your bean with data here...
public void doProcessAfterInput() throws PageException {
public void doProcessBeforeOutput() throws PageException {
this.setJspName("testDBv5.jsp");
//testing purpose
public static void main (String[] arg){
testDBv5DynPage ef = new testDBv5DynPage();
ef.doInitialization();
Thanks Loads
Quatre -
Error while updating data from PSA to ODS
Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo -
Error while selecting date from external table
Hello all,
I am getting the follwing error while selecting data from external table. Any idea why?
SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
2 SE_CUST_ID NUMBER(38),
3 SE_TRAN_AMT_LCY FLOAT(126),
4 SE_REVERSAL_MARKER VARCHAR2(255))
5 ORGANIZATION EXTERNAL (
6 TYPE ORACLE_LOADER
7 DEFAULT DIRECTORY ext_tables
8 ACCESS PARAMETERS (
9 RECORDS DELIMITED BY NEWLINE
10 FIELDS TERMINATED BY ','
11 MISSING FIELD VALUES ARE NULL
12 (
13 country_code CHAR(5),
14 country_name CHAR(50),
15 country_language CHAR(50)
16 )
17 )
18 LOCATION ('SE2.csv')
19 )
20 PARALLEL 5
21 REJECT LIMIT UNLIMITED;
Table created.
SQL> select * from se2_ext;
SQL> select count(*) from se2_ext;
select count(*) from se2_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SE_REF_NO
ORA-06512: at "SYS.ORACLE_LOADER", line 19It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
HTH -- Mark D Powell -- -
DB Connect Load - "Unknow error while uploading data from the DB Table"
Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
AbhijitHi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait -
How do i parse data from the second jframe back to the first?
Hello.
I have a jFrame were I promt users to keep a list of Names in a jTable. (I keep data for something else, but lets say names.. ) Anyway, afterwords I want to add some extra parameters for each name. So I created a new frame, which is opened when user press an Edit button. The new frame opens and users can add for the specific name some extra data, like age, height, color, sex.. etc. that characterizes this person.
On this second form i have a save button, which when its pressed i would like to keep this information for this name, so as when user press edit again from the first frame on the same Name the data that previously entered will be loaded (lets say that the user can not enter the say name again)
I haven' t figured the code for the save Button, but with the rest I am fine.
Can you give any ideas with structures that I have to use and how the action listener will have to be??
When I set visible the new form i have made a constructor that loads the new form which have a label with the name of the person that is edited., but how do i parse data from the second form back to the first that is already opened??
Thanks very much..I found it.. it was not so hard afterall..
anyway, i quote the new code..
package namelist;
// Java core packages
import java.awt.event.*;
import java.util.*;
// Java extension packages
import javax.swing.*;
import javax.swing.table.*;
public class NamesGUI extends javax.swing.JFrame {
//Variables for managing the jTables
DefaultTableModel tableModel;
Vector rows,cols;
String[] colName1 = {"List of Names"};
ManageJTables mJT = new ManageJTables();
Hashtable h;
/** Creates new form ProsAgentGUI */
public NamesGUI() {
h = new Hashtable();
initComponents();
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
private void initComponents() {
Panel = new javax.swing.JPanel();
ToolBar = new javax.swing.JToolBar();
ADD = new javax.swing.JButton();
EDIT = new javax.swing.JButton();
REMOVE = new javax.swing.JButton();
jButton1 = new javax.swing.JButton();
TScrollPane = new javax.swing.JScrollPane();
Table = new javax.swing.JTable();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
setTitle("Names");
setBackground(new java.awt.Color(0, 51, 51));
Panel.setBorder(javax.swing.BorderFactory.createTitledBorder("List of Names"));
ToolBar.setBorder(javax.swing.BorderFactory.createEmptyBorder(1, 1, 1, 1));
ADD.setText("ADD");
ADD.setToolTipText("");
ADD.setBorder(new javax.swing.border.SoftBevelBorder(javax.swing.border.BevelBorder.RAISED));
ADD.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
ADDActionPerformed(evt);
ToolBar.add(ADD);
EDIT.setText("EDIT");
EDIT.setToolTipText("");
EDIT.setBorder(new javax.swing.border.SoftBevelBorder(javax.swing.border.BevelBorder.RAISED));
EDIT.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
EDITActionPerformed(evt);
ToolBar.add(EDIT);
REMOVE.setText("REMOVE");
REMOVE.setToolTipText("");
REMOVE.setBorder(new javax.swing.border.SoftBevelBorder(javax.swing.border.BevelBorder.RAISED));
REMOVE.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
REMOVEActionPerformed(evt);
ToolBar.add(REMOVE);
jButton1.setText("jButton1");
jButton1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton1ActionPerformed(evt);
ToolBar.add(jButton1);
rows=new Vector();
cols= new Vector();
cols=mJT.addColumns(colName1, cols);
tableModel =new DefaultTableModel();
tableModel.setDataVector(rows,cols);
Table.setModel(tableModel);
TScrollPane.setViewportView(Table);
org.jdesktop.layout.GroupLayout PanelLayout = new org.jdesktop.layout.GroupLayout(Panel);
Panel.setLayout(PanelLayout);
PanelLayout.setHorizontalGroup(
PanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(ToolBar, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 210, Short.MAX_VALUE)
.add(TScrollPane, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 210, Short.MAX_VALUE)
PanelLayout.setVerticalGroup(
PanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(PanelLayout.createSequentialGroup()
.add(ToolBar, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 34, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(TScrollPane, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 159, Short.MAX_VALUE))
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
.addContainerGap(org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.add(Panel, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap())
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
.addContainerGap(29, Short.MAX_VALUE)
.add(Panel, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap())
pack();
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
System.out.println(h.toString());
public void updateNamesTable (int id, String na){
Integer i2 = new Integer(id);
Object o2 = (Object)i2;
if (h.containsKey(o2)){
Name a = (Name)h.get(o2);
a.name = na;
h.put(o2,a);
else {
Name aa = new Name();
aa.name=na;
h.put(o2,(Object)aa);
private void EDITActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
String name = Table.getValueAt(Table.getSelectedRow(),0).toString();
int rowNum= Table.getSelectedRow();
Integer i = new Integer(rowNum);
Object o = (Object)i;
updateNamesTable (rowNum, name);
//public NameEditor(Name n, Hashtable h, int id)
NameEditor re = new NameEditor((Name)h.get(o), h, rowNum );
re.setVisible(true);
private void REMOVEActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
mJT.deleteRow(Table.getSelectedRow(), rows, Table);
private void ADDActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
mJT.addRow(rows, Table);
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new NamesGUI().setVisible(true);
// Variables declaration - do not modify
javax.swing.JButton ADD;
javax.swing.JButton EDIT;
javax.swing.JPanel Panel;
javax.swing.JButton REMOVE;
javax.swing.JScrollPane TScrollPane;
javax.swing.JTable Table;
javax.swing.JToolBar ToolBar;
javax.swing.JButton jButton1;
// End of variables declaration
public class NameEditor extends javax.swing.JFrame {
Hashtable h;
Name n;
int id;
/** Creates new form NameEditor */
public NameEditor() {
initComponents();
public NameEditor(Name n, Hashtable h, int id) {
this.h=h;
this.n=n;
this.id=id;
initComponents();
NameField.setText(n.name);
jTextField2.setText(n.weight);
jTextField1.setText(n.height);
setDefaultCloseOperation(javax.swing.WindowConstants.DISPOSE_ON_CLOSE);
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
private void initComponents() {
NameLabel = new javax.swing.JLabel();
NameField = new javax.swing.JTextField();
SaveBut = new javax.swing.JButton();
jLabel3 = new javax.swing.JLabel();
jLabel4 = new javax.swing.JLabel();
jTextField1 = new javax.swing.JTextField();
jTextField2 = new javax.swing.JTextField();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
setTitle("Name Editor");
getAccessibleContext().setAccessibleName("Name Editor");
NameLabel.setText("Name: ");
NameField.setEditable(false);
NameField.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
NameFieldActionPerformed(evt);
SaveBut.setText("SAVE");
SaveBut.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
SaveButActionPerformed(evt);
jLabel3.setText("Height");
jLabel4.setText("Weight");
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(jLabel4)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED))
.add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jLabel3)
.add(NameLabel))
.add(16, 16, 16)))
.add(17, 17, 17)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(NameField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 138, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING, false)
.add(org.jdesktop.layout.GroupLayout.LEADING, jTextField2)
.add(org.jdesktop.layout.GroupLayout.LEADING, jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 46, Short.MAX_VALUE))))
.add(org.jdesktop.layout.GroupLayout.LEADING, layout.createSequentialGroup()
.add(127, 127, 127)
.add(SaveBut)))
.addContainerGap())
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(NameLabel)
.add(NameField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.add(30, 30, 30)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jLabel3)
.add(jTextField1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.add(12, 12, 12)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jLabel4)
.add(jTextField2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED, 27, Short.MAX_VALUE)
.add(SaveBut)
.addContainerGap())
pack();
public void updateNameTable (){
Integer i2 = new Integer(id);
Object o2 = (Object)i2;
h.put(o2,n);
private void SaveButActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
n.height= jTextField1.getText();
n.weight = jTextField2.getText();
private void NameFieldActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new NameEditor().setVisible(true);
// Variables declaration - do not modify
javax.swing.JTextField NameField;
javax.swing.JLabel NameLabel;
javax.swing.JButton SaveBut;
javax.swing.JLabel jLabel3;
javax.swing.JLabel jLabel4;
javax.swing.JTextField jTextField1;
javax.swing.JTextField jTextField2;
// End of variables declaration
} -
Error while sending data from XI to BI System
Hello Friends,
I m facing an error while sending data from XI to BI. XI is successfully recived data from FTP.
Given error i faced out in communication channel monitoring:-
Receiver channel 'POSDMLog_Receiver' for party '', service 'Busys_POSDM'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.1.45.35:sapgw01' not reached
TIME Fri Apr 16 08:15:18 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
Error displaying in message monitoring:-
Exception caught by adapter framework: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME Fri Apr 16 08:15:18 2010 RELEASE 70
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME.
Kindly suggest me & provide details of error.
Regards,
NarendraHi Narendra,
Message is clearly showing that your system is not reachable
102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached
Please check to ping the BI server IP 10.1.45.35 from your XI server , in case its working you can check telnet to SAP standard port like 3201/3601/3301/3901 etc.
It seems to be connectivity issue only.
Make sure your both the systems are up and running.
Revert back after checking above stuff.
Regards,
Gagan Deep Kaushal -
Error while retrieving data from an ARRAY resultset
We hava an Oracle stroed procedure which has a table type as its OUT parameter and where the data is being entered into. This data requries to be returned to the Java client through a JDBC connection. We have used the OracleTypes' ARRAY object for this. We are facing errors when retieving data from the ARRAY resultset
The Oracle Package
----I created a table type called "PlSqlTable":
CREATE OR REPLACE TYPE PlSqlTable IS TABLE OF VARCHAR2(20);
----I defined this as the out parameter for my procedure :
PROCEDURE testSQL
arrayOutID OUT PlSqlTable
Then populated the object :
arrayOutID := PlSqlTable();
arrayOutID.extend(4);
arrayOutID(1):= 'Hello';
arrayOutID(2) := 'Test';
arrayOutID(3) := 'Ora';
----The procedure executes fine - all debug statements are printed ----right till the end of execution.
The Java class
----Here is how I have defined the parameters :
OracleCallableStatement stmnt = (OracleCallableStatement)connection.prepareCall("begin testSQL(?);end;");
stmnt.registerOutParameter(2,OracleTypes.ARRAY,"PLSQLTABLE");
System.out.println("Executing..");
stmnt.execute();
System.out.println("Executed..");
ARRAY outArray = stmnt.getARRAY(1);
System.out.println("Got array");
ResultSet rset = outArray.getResultSet();
System.out.println("Got Resultset..");
int i = 1;
while(rset.next()){
System.out.println("VALUE : " + rset.getString(i));
i = i+1;
----On execution, the debug messages display :
Executing..
Executed..
Got array
Got Resultset..
VALUE : 1
VALUE : Test
ERROR : java.sql.SQLException: Invalid column index
----But I have populated upto 3 values in th e procedure. Then why this error ?
PLLLEEEASE help me out on this.
Thanks, Sathyahaven't worked with db arrays but I think your problem is here:int i = 1;
while(rset.next()){
System.out.println("VALUE : " + rset.getString(i));
i = i+1;
}In the first loop you are retrieving the value from column 1(rs.getString(1)), which is OK, but in the second loop, you are trying to retrieve a value from the second column(rs.getString(2)) which doesn't exist. Try this code which only reads from column1:
while(rset.next()){
System.out.println("VALUE : " + rset.getString(1));
}Jamie -
Error while updating data from DataStore object
Hi,
Currently we are upgrading BW3.5 to BI7.0 for technical only,
we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
The error message are:
Error while updating data from DataStore object 0GLS_INV
Message no. RSMPC146
Job terminated in source system --> Request set to red
Message no. RSM078
That's all no further errors message can be explained clearly here from system.
I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
Still no help here!?
Please advise if you encountered these errors before.
Thanks in advance.
Regards,
David
Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PMHi Vijay,
I got this error:
Runtime Errors MESSAGE_TYPE_X
Date and Time 04.11.2008 11:43:08
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Short text of error message:
No start information on process LOADING
Long text of error message:
Diagnosis
For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the
end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX
under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has
been logged for this process.
System Response
No log has been written. The process (and consequently the chain)
has been terminated.
Procedure
If possible, restart the process.
Procedure for System Administration
Technical information about the message:
Message class....... "RSPC"
Number.............. 004
Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"
Variable 2.......... "LOADING"
Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"
Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX"
Any idea? -
Database.LoadDataSet() method is throwing error during retriving data from empty table of IBM DB2 database. It is giving error code "SQL0100W".
“Error Message: 0NO_DATA [02000] [IBM] [DB2 / NT] SQL0100W FETCH, whether there is a line to be UPDATE or DELETE, or of the query result is an empty table .
SQLSTATE = 02000”Hello SharayuPandit,
For issues regarding DB2, i suggest that you could post it to DB2 related forum:
https://www.ibm.com/developerworks/community/forums/html/forum?id=11111111-0000-0000-0000-000000000842
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Error while copying data from infoprovider to planning area
Hi,
Error for COM routine using application program (return code 40,075)
Message no. /SAPAPO/OM102
Diagnosis
An application program has called a COM routine. During the process, an error occurred.
I got the above error while copying data from infoprovider to planning area using t code TSCUBE.
How to resolve this?Hi,
Is your issue resolved, If not please run MPOS consistency checks, Planning area consistency check and livecache consistency check.
Below are the programs for the same.
/SAPAPO/TS_lcm_cons_check
/SAPAPO/TS_PSTRU_TOOL
/SAPAPO/TS_PSTRU_CONS_CHECK
Regards
Kishore -
Error while loading data from a file on application server
Hi all,
Facing an error while loading data from a flat file.
Error 'The argument '##yyyymmdd;@##' cannot be interpreted as a number ' while assigning character.
I changed the format of date fields (tried with number,general,date(International))in the xls. But i still get the same error.Did check all the data types in Data source all the fields are dats.
Can you please tell me what could be the problem?
Thank you all,
PraveenHi all,
As far as my first question i got through it but i had one more field in my flat file while actually is a time stamp, but in my flat file i have a data in this format
10/21/2006 5:11:48 AM which i need to change to 10/21/2006
one more note is i have some of the fields as NULL in this field
Last Updated Date
10/21/2006 5:11:48 AM
10/21/2006 5:11:48 AM
NULL
NULL
10/21/2006 5:11:48 AM
NULL
I want to display the values as 10/21/2006 and NULL as it is.
Please let me know if we have a conversion routine in datasource which can solve my problem.
Regards,
Praveen -
Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7
Hi Gurs,
I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
The error is:
Update mode "Full Upload" is not supported by the extraction API
Message no. R3011
Diagnosis
The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or send a problem message of your own.
Your help in this regd. would be highly appreciated.
Thanks,
David.Hi David,
I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
Try to switch you DTPs/Infopackages to Delta mode.
While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
BR
m./ -
Error while loading data from DS into cube
Hello All
I am getting the below error while loading data from Data source to the cube.
Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
Wht am i suppose to do?
Need ur input in this regard.
Regards
RohitHi
Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
If your business is April to March make it as 'V3'
If your business is January to Decemeber make it as 'K4'..
activate your update rules delete old data and upload again....
Hope it helps
Thanks
Teja
Maybe you are looking for
-
How can I use an external mic to record meeting audio with quicktime player
I'm trying to use a SoundTech CM-1000 conference mic to record meetings at a conference I am running. I'm using Quicktime for the recordings. The SoundTech CM-1000 conference mic does not transmit any sound when connected to the Audio-in plug on my
-
The following error comes up when I try to install the updated Firefox: "The operation can't be completed because some items had to be skipped. For each item, choose File > Get Info, make sure "Locked" is deselected, and then check the Sharing & Perm
-
COPA Value Fields maximum limit
Hi, I read that there is a limit on the number of value fields that you can have in an Operating Concern, which is 120. There is an OSS Note (160892) that describes how you can extend this number to more than 120, however SAP puts a disclaimer that i
-
Filename problems when checking out documents
Hi,Client machines are using Windows NT4 SP6 and Internet Explorer 6.0.2800.1106CO. Environment is Plumtree 4.5 SP1, Collab Server 2.02.We have an issue whereby when users check out documents with periods in the filename, the default filename for the
-
Configuring SharePoint Apps in Production Environment
SharePoint 2013 Environment. We are trying to configure SharePoint APPS in production environment. It is a medium server farm with two W.F.E's load balanced. We have the following two DNS entires with two different wildcards pointing to the SharePoi