Error in passing internal table to smartform

I have created a structure type in the driver program as below.
tYPES : BEGIN OF gy_final,
          matnr TYPE mara-matnr,
          ersda TYPE mara-ersda,
          ernam TYPE mara-ernam,
          laeda TYPE mara-laeda,
          mtart TYPE mara-mtart,
          matkl TYPE mara-matkl,
          meins TYPE mara-meins,
          lgort TYPE mard-lgort,
          werks TYPE mard-werks,
        END OF gy_final.
Then i created internal table and its work area of the above structure type as below
data: it_final type STANDARD TABLE OF gy_final,
         wa_final type gy_final.
I fetched the records in to the internal table it_final.
Now i wanted to pass this in to smartform.
nasi
CALL FUNCTION 'fname'
EXPORTING
    it1_final = it_final.
I have created a similar structure in DDIC and declared in the smartform
still it shows the error
The following syntax error occurred in program "/1BCDWB/SAPLSF00000239 " in
include "/1BCDWB/LSF00000239F01 " in
line 669:
""IT_FINAL" is neither specified under "TABLES" nor is it defined as an"
" internal table."
Please help me to sove this issue.

In form interface -> go to tab TABLE then declare as IT1_FINAL LIKE <structure DDIC>.
And i think when call form it should:
CALL FUNCTION 'fname'
TABLES
it1_final = it_final.
Regards,
Edited by: Thien M. Pham on Sep 15, 2010 3:28 PM
Edited by: Thien M. Pham on Sep 15, 2010 3:29 PM
Edited by: Thien M. Pham on Sep 15, 2010 3:30 PM

Similar Messages

Passing internal tables into smartforms

Hi All,
I am testing a smartform for PO. But the smartform is already designed and it has two internal tables of type EKKO and EKPO. When i run the smartform its displaying the layout correctly but with no data ,which is true as the two internal tables have no data. So i want to fill those two internal tables based on the purchase order number/ numbers. So that i can test the smartform with those purchase order numbers.
I want to create a parameter / select option in smartform so that when we enter the PO number those internal tables will be filled. How to create those options in the smartform.
If i have to create through an ABAP program then i want to know how to pass those two internal tables to smartform. (Shall i have to call the FM couple of times and then pass those two internal tables).
Thanks in Advance

You fill the tables in the print program and pass the tables to the SmartForm function module under the tables section. See the FM call below (CALL FUNCTION lf_fm_name) and note that I am only passing in one internal table. If you wish you may pass in more than one table.
*& Form smartform_print
* text
* --> p1 text
* <-- p2 text
FORM smartform_print .
DATA: lf_fm_name TYPE rs38l_fnam.
DATA: ls_control_param TYPE ssfctrlop.
DATA: ls_composer_param TYPE ssfcompop.
DATA: ls_recipient TYPE swotobjid.
DATA: ls_sender TYPE swotobjid.
DATA: lf_formname TYPE tdsfname.
DATA: ls_addr_key LIKE addr_key.
PERFORM set_print_param USING ls_addr_key
 CHANGING ls_control_param
 ls_composer_param
 ls_recipient
 ls_sender
 retcode.
*Get the Smart Form name.
IF NOT tnapr-sform IS INITIAL.
 lf_formname = tnapr-sform.
ELSE.
 MESSAGE e001(/smb40/ssfcomposer).
ENDIF.
IF vbdkr-vkorg = '0035'.
 IF w_regio = 'QC'.
 tnapr-fonam = 'ZPCC_INVOICE_FR'.
 ENDIF.
ENDIF.
* IF NOT tnapr-sform IS INITIAL.
* lf_formname = tnapr-sform.
* ELSE.
* MESSAGE e001(/smb40/ssfcomposer).
* ENDIF.
* determine smartform function module for invoice
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING formname = lf_formname
* variant = ' '
* direct_call = ' '
 IMPORTING fm_name = lf_fm_name
 EXCEPTIONS no_form = 1
 no_function_module = 2
 OTHERS = 3.
IF sy-subrc <> 0.
* error handling
 retcode = sy-subrc.
 IF sy-subrc = 1.
 MESSAGE e001(/smb40/ssfcomposer).
 ENDIF.
 IF sy-subrc = 2.
 MESSAGE e002(/smb40/ssfcomposer).
 ENDIF.
 PERFORM protocol_update.
ENDIF.
CALL FUNCTION lf_fm_name
 EXPORTING
 archive_index = toa_dara
* ARCHIVE_INDEX_TAB =
 archive_parameters = arc_params
 control_parameters = ls_control_param
* MAIL_APPL_OBJ =
 mail_recipient = ls_recipient
 mail_sender = ls_sender
 output_options = ls_composer_param
 user_settings = ' '
 vbdkr = vbdkr
 temp_jmval = temp_jmval
 temp_agval = temp_agval
 w_ship = w_ship
 w_ktgrd = w_ktgrd
 likp = likp
 w_trlrnbr = w_trlrnbr
 w_sealnbr = w_sealnbr
 w_booknbr = w_booknbr
 w_lc = w_lc
 w_shippoint = w_shippoint
 billto_fedid = billto_fedid
 soldto_fedid = soldto_fedid
 shipto_fedid = shipto_fedid
 vbco3 = vbco3
 w_z4_address = w_z4_address
 w_stawn = w_stawn
 w_herkl = w_herkl
 new_rate = new_rate
 vblkp = vblkp
 TABLES
 vbdpr = tvbdpr
* t_containers = t_containers
* tdomvd = tkomvd
* da_xfplt = da_xfplt
* payment_split = payment_split
* komk = komk
* frt_conditions = frt_conditions
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
 retcode = sy-subrc.
 PERFORM protocol_update.
* get SmartForm protocoll and store it in the NAST protocoll
 PERFORM add_smfrm_prot.
ENDIF.
ENDFORM. " smartform_print
Davis

PASSING INTERNAL TABLE IN SMARTFORM

HI' I M NEW TO SMARTFORMS, MY PROBLEM IS =THAT
I'VE CREATED A NEW TYPE(SAY TY_BKPF) IN THE DRIVER PROGRAM.
THEN I'VE DECLARED AN INTERNAL TABLE OF THIS TYPE.
TO PASS THIS INTERNAL TABLE INTO MY SMARTFORM I'VE PASSED THE INTERNAL TABLE'S NAME INTO THE FUNCTION MODULE UNDER THE TABLES PARAMETER.
BUT I'M NOT ABLE TO UNDERSTAND AS TO WHAT TYPE SHOULD I GIVE IT IN THE FORM INTERFACE IN THE TABLES TAB.
PLZ HELP.

Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
Also have a look at below sample code. It will give you idea abt the same.
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
 INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
 MOVE-CORRESPONDING MKPF TO INT_MKPF.
 APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
 formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
 FM_NAME = FM_NAME
EXCEPTIONS
 NO_FORM = 1
 NO_FUNCTION_MODULE = 2
 OTHERS = 3.
if sy-subrc <> 0.
 WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
 GS_MKPF = INT_MKPF
EXCEPTIONS
 FORMATTING_ERROR = 1
 INTERNAL_ERROR = 2
 SEND_ERROR = 3
 USER_CANCELED = 4
 OTHERS = 5.
if sy-subrc <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Have a look at below link for more help on smart forms.
http://sap.ionelburlacu.ro/sap0/sapsf001.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers

Error in passing internal table as returning parameter

Hi
Im new to ABAP OO.
I declared a parameter ret_kna1 Returning Type KNA1.
Inside the method, I am retrieving data from table KNA1 into internal table and then I want return the interal table value.
But Im not able to assing the internal table for eg : code
method READ_CUSTOMER_LIST.
data: lt_kna1 type TABLE OF kna1,
      wa_kna1 LIKE LINE OF lt_kna1.
data: lv_kunnr type kna1-kunnr,
      lv_land1 type kna1-LAND1.
SELECT * FROM kna1
INTO TABLE lt_kna1
WHERE land1 eq lv_land1.
insert LINES OF lt_kna1 INTO TABLE ret_kna1.
endmethod.
when I try to activate the error says 'ret_kna1 is not an internal table "OCCURS n" specification is missing.
but I can not declare the internal table 'ret_kna1' once again in the code, as it already defined in the parameter as type KNA1.
please help me how to assign internal table values to the returing structur.

Are you passing it as an EXPORT parameter?
use and define it in the TABLES section of your function module as so:
*" IMPORTING
*"     VALUE(INCLUDE_X_LEVELS) TYPE CHAR1 OPTIONAL
*" TABLES
*"      I_SELECTED_OU STRUCTURE HRROOTOB
*"      I_SELECTED_EE STRUCTURE OBJEC
*"      E_VIP_EPM_DISTR STRUCTURE ZHR_VIP_EPM_DISTR
*"      E_RETURN STRUCTURE BAPIRET1
That way you can pass value in the table (if needed) and then pass the table with your values based on your own logic

Error while passing internal table between methods at design time

Hi,
In a method (say method1 for eg) I have declared an internal table, IT_RANGE2 as:
DATA: IT_RANGE2 TYPE STANDARD TABLE OF ZTTRANGE
ZTTRANGE is a tabletype in SE11 and has a line type ZRANGE.
In this method, I am calling another method (method2)
WD_COMP_CONTROLLER->HOLD_DATA( CHANGING IT_RANGE = IT_RANGE2 ).
IT_RANGE has been declared as;
PARAMETER TYPE REFTO ASSOCIATED TYPE
IT_RANGE CHANGING ZTTRANGE.
I am getting an error: IT_RANGE2 is not type-compatible with formal parameter IT_RANGE.
Please help.
MIck

change it_range2 like this
DATA: IT_RANGE2 TYPE ZTTRANGE

How to define internal table in smartform(urgent)

Hi all,
How can i define a internal table with header line in global data ???
i defined like
In Types,
TYPES : BEGIN OF T_XVBPLP2 ,
 VENUM(10),
 VEPOS(10),
 POSNR(6),
 VEMNG LIKE LIPS-LFIMG,
 MATNR LIKE LIPS-MATNR,
 CHARG LIKE LIPS-CHARG,
 ARKTX LIKE LIPS-ARKTX,
 END OF T_XVBPLP2.
TYPES: T_XVBPLP TYPE TABLE OF T_XVBPLP2.
In Global Data,
T_XVBPLP TYPE T_XVBPLP.
Still, i am getting error message that, Internal table is not with header line.
can u plz give me some examples , to define internal table with header line in smartform ???
any correct answers will be rewarded??
Regards
pabitra

Hi
define WA_ITAB in Global variables
variable name type assin associated type
t_text like zstc_text
you cannot define a internal table with header line in SMART Forms. Declare a internal table and a work area separately both referring to the same structure.
Then you can use the work area. So, in this case WA_ITAB is declared as a global variable of TYPE ZSTC_TEXT.
Regards
Pavan

Declaring an internal table in smartform

hi,
 can anyone tell how to declare internal table in smartform.
 the internal table contains fields from 2 or more data dictionary tables(eg.kna1
 and adrc). after this from the print program(internal table containing data in print
 program) internal table should be passed to the smartform.
thanks.

hi laxya,
if u want to pass the data from internal table in print program to Smartform.. there is only way.. that is using form interface..
1. goto se11, create a structure same as the itab in the print program.ex. z_itab
2. create line type... se11>select radio button-DATA type>z_it_itab >press create>then select>TABLE Type> then entrer some text--> in the line type Field in giveth Str name u have created in STEP 1. activate it.
3. got SMARTFORMS-> form inteface>tables tabe--> give some name ex IT_tab type z_it_itab.
then acivate it.. then in the driver progam pass this table data.
Exapmpel
CALL FUNCTION fp_v_fm_name
 EXPORTING
 archive_index = toa_dara
 archive_parameters = arc_params
 control_parameters = fp_st_control_parameters
 user_settings = space
 output_options = fp_st_output_options
 wa_vbdkr = fp_st_vbdkr
 IMPORTING
 job_output_info = l_it_ssfcrescl
 job_output_options = l_it_ssfcresop
 TABLES
 IT_tab = z_it_itab (or table in driver program)
EXCEPTIONS
 formatting_error = 1
 internal_error = 2
 send_error = 3
 user_canceled = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Another way is cteate a type in Globaldifination-->types tab..
ex:
types: begin of ty_itab,
 matnr type matnr,
 meins type meins
 vrkme type vrkme,
end of ty_itab,
ty_it_itab type standard table of ty_itab.
then GLOBAL DIFINATION>GLOBAL DATA TAB>IT)ITAB TYPE TY_IT_ITAB.
BUT In this u can't pass the data from the print Program.. if u want to populate data in to this table... u have to write the Select query in the GLOBAL DIFINATIONS-->INITILIZATIONS TAB.
Please Close this thread.. when u r problem is solved
Reward if Helpful
Regards
Naresh Reddy K
Message was edited by:
 Naresh Reddy

How to Define Internal Table in Smartform

Hello,
I have some problem on define Internal Table in Smartform
I define a Temp_IT_Gen Type LBBIL_IT_GEN in Global Definiations
but i find that it is not available for me to append data into it,
the error message is Temp_IT_Gen is not a Internal Table - the Occurs n Specification is missing
so how can i solve it?
i want to use the internal table in the hold program.
Thanks a lot in advance.

Hi,
First U define the Table type in 'TYPES' tab of Global Definitions and then assing that table type to Internal table in 'Global Data' tab.
Eg:
define the Table Type like below in TYPES tab.
TYPES:BEGIN OF ty_TEMP.
        INCLUDE STRUCTURE XXXXXXX.
TYPES:END OF ty_TEMP.
TYPES: g_t_temp TYPE STANDARD TABLE OF ty_TEMP .
Now, define the Internal table in Global Data tab like below:
Variable Name    Type assignment    Associated Type
G_T_ITEM_1       TYPE                    G_T_TEMP
NOTE: whatever U define in Global Definitions can be used only in SMARTFORM, if u want to use it in Program U must define in Form Interface.
Hope it helps!!
Rgds,
Pavan

How to pass internal table to form routine..?

Gurus,
I am creating a custom Function module in which i have declared few perform statements and passing internal table to it..but when i declare the form it gives me error that the internal table is unknown...Can u please suggest me what am i doing wrong...
DATA: Begin of tb_set_values occurs 0.
 include structure rgsb4.
DATA: End of tb_set_values.
PERFORM read_sets_with_values USING wa_setheader CHANGING tb_set_values[].
FORM read_sets_with_values USING value(rwa_setheader) LIKE setheader
 CHANGING rtb_set_values LIKE tb_set_values[].
DATA: v_setid TYPE setid.
*DATA: Begin of rtb_set_values occurs 0.
 include structure rgsb4.
*DATA: End of rtb_set_values.
CALL FUNCTION 'G_SET_GET_ID_FROM_NAME'
 EXPORTING
 SHORTNAME = rwa_setheader-setname
 IMPORTING
 NEW_SETID = v_setid.
CALL FUNCTION 'G_SET_GET_ALL_VALUES'
 EXPORTING
 SETNR = v_setid
 TABLES
 SET_VALUES = rtb_set_values.
ENDFORM.
What can be the error..please help

Well actually, I just tested it and it works fine as you have written it in my test program, so not sure what you are doing wrong. This was tested in NW 7.0
REPORT rich_0001.
DATA: setheader TYPE string.
DATA: wa_setheader TYPE string.
DATA: BEGIN OF tb_set_values OCCURS 0.
 INCLUDE STRUCTURE t000. "<<-- Test with T000 instead "rgsb4.
DATA: END OF tb_set_values.
SELECT * INTO TABLE tb_set_values FROM t000.
PERFORM read_sets_with_values USING wa_setheader
 CHANGING tb_set_values[].
*& Form read_sets_with_values
* text
* -->VALUE(RWA_SETHEADER) text
* -->RTB_SET_VALUES text
FORM read_sets_with_values USING value(rwa_setheader) LIKE setheader
 CHANGING rtb_set_values LIKE tb_set_values[].
DATA: ls_set_values LIKE LINE OF rtb_set_values.
LOOP AT rtb_set_values INTO ls_set_values.
 WRITE:/ ls_set_values.
ENDLOOP.
ENDFORM. "read_sets_with_values
Regards,
RIch Heilman

How to pass internal table to method of class

Hi all,
I am new to abap objects, i want to pass one internal table to class.
i am trying in this way.
class c1 definition.
method get_material importing t_stpo type any table
 exporting t_mast type any table.
endmethod.
endclass.
class c1 implementation.
method get_material.
select f1 f2 f3 from <tab> into table t_mast
 for all entries in t_stpo
 where stlnr = t_stpo-stlnr.
endmethod.
endclass.
ERROR:
"stlnr" is not available
if i use this way. its not giing error.
class c1 definition.
method get_material exporting t_mast type any table.
endmethod.
endclass.
class c1 implementation.
method get_material.
select f1 f2 f3 from <tab> into table t_mast
 for all entries in it_stpo
 where stlnr = it_stpo-stlnr.
endmethod.
endclass.
how to pass internal table with some specific reference may be using like or type <it_xxxx>
thanks

Try this.
TYPES : BEGIN OF ty_stpo,
 stlnr TYPE stpo-stlnr,
 idnrk TYPE stpo-idnrk,
 menge TYPE stpo-menge,
 END OF ty_stpo,
 BEGIN OF ty_mast,
 matnr TYPE mast-matnr,
 werks TYPE mast-werks,
 stlnr TYPE mast-stlnr,
 END OF ty_mast,
 tt_stpo TYPE TABLE OF ty_stpo,
 tt_mast TYPE TABLE OF ty_mast.
DATA : it_stpo TYPE tt_stpo,
 it_mast TYPE tt_mast.
* CLASS c1 DEFINITION
CLASS c1 DEFINITION.
PUBLIC SECTION.
 METHODS : get_bom_numbers EXPORTING ex_stpo type tt_stpo,
 get_parent_material IMPORTING im_stpo TYPE tt_stpo
 EXPORTING ex_mast TYPE tt_mast.
 endclass.
* CLASS c1 IMPLEMENTATION
CLASS c1 IMPLEMENTATION.
METHOD get_bom_numbers.
ENDMETHOD. "get_bom_numbers
METHOD get_parent_material.
ENDMETHOD. "get_parent_material
START-OF-SELECTION.
DATA : obj TYPE REF TO c1.
CREATE OBJECT obj.
CALL METHOD obj->get_bom_numbers
 IMPORTING
 t_stpo = it_stpo.
CALL METHOD obj->get_parent_material
 EXPORTING
 im_stpo = it_stpo
 IMPORTING
 ex_mast = it_mast.
Regards,
Rich Heilman

How to Import customized internal table to smartform from Print Program

Hi Gurus,
I want to Import customized internal table to smartform from print program, Can anybody tell me how it is possible.
With regards,
S.Saravanan

There is no problem passing an internal table to a smarforms, smartforms have the same interface as a function module ([Defining the Form Interface|http://help.sap.com/saphelp_nw70/helpdata/en/1c/f40c5bddf311d3b574006094192fe3/frameset.htm] in [Smart Forms|http://help.sap.com/saphelp_nw70/helpdata/en/a5/de6838abce021ae10000009b38f842/frameset.htm]) so could you elaborate a little more on your requirement (is it a standard a custom forms, etc.)
Regards,
Raymond

Passing internal tables dynamically to a subroutine

Hi All,
How to pass internal tables dynamically to a subroutine?
In subroutine logic i'm fetching data from MARA table for all entries in the internal table passed to the subroutine. Based on some condition the internal table varies. I'm placing the code below
Both GT_AUFM & GT_AUFM1 are of 2 different structures having MATNR.
IF WA_AUFM1-BWART EQ '261'.
    PERFORM GET_IF_SEMIFINISHED USING GT_AUFM1.
ELSE IF WA_AUFM1-BWART EQ '262'.
    PERFORM GET_IF_SEMIFINISHED TABLES GT_AUFM.
ENDIF.
FORM GET_IF_SEMIFINISHED USING P_TABLE TYPE ANY TABLE.
REFRESH GT_MARA.
SELECT MATNR FROM MARA INTO TABLE GT_MARA
                 FOR ALL ENTRIES IN P_TABLE
                 WHERE MATNR EQ P_TABLE-MATNR
                   AND MTART IN R_MTART.
ENDFORM.
With this logic i'm getting an error that the specified type has no structure and therefore no component called MATNR.
Thanks,
Anil.

refer this link
dynamic internal table

To pass internal table data(including subtotal) to dynamic internal table

here i am displaying the dynamic internal table in alv grid.
i followed like this but i am unable to get the subtotal form the internal table.
LOOP AT ITAB1. " assigning <fs_itab1>.
 ASSIGN COMPONENT 'RACCT' OF STRUCTURE <DYN_WA> TO <DYN_FIELD>.
 <DYN_FIELD> = ITAB1-RACCT.
 ASSIGN COMPONENT 'ERGSL' OF STRUCTURE <DYN_WA> TO <DYN_FIELD>.
 <DYN_FIELD> = ITAB1-ERGSL.
 ASSIGN COMPONENT 'TEXT' OF STRUCTURE <DYN_WA> TO <DYN_FIELD>.
 <DYN_FIELD> = ITAB1-TEXT.
 I = 4.
 CLEAR COMP_ITAB.
 LOOP AT COMP_ITAB.
 ASSIGN COMPONENT I OF STRUCTURE <DYN_WA> TO <DYN_FIELD>.
 LOOP AT ITAB WHERE RACCT = ITAB1-RACCT.
 IF ITAB-RBUKRS EQ COMP_ITAB-RBUKRS.
 IF ITAB1-RBUKRS EQ COMP_ITAB-RBUKRS.
 <DYN_FIELD> = ITAB1-REPVAL.
 SUB_TOT = ITAB1-REPVAL.
 ELSE.
 <DYN_FIELD> = 0.
 SUB_TOT = 0.
 ENDIF.
 ENDLOOP.
 I = I + 1.
 TOTAL = TOTAL + SUB_TOT.
 ENDLOOP.
 ASSIGN COMPONENT I OF STRUCTURE <DYN_WA> TO <DYN_FIELD>.
 <DYN_FIELD> = TOTAL.
 APPEND <DYN_WA> TO <DYN_TABLE>.
 CLEAR <DYN_WA>.
 TOTAL = 0.
ENDLOOP.
Thanks,
sridhar.

Hi Rakesh,
We pass internal tables for the smartform are shown in bold in below code,
CALL FUNCTION LF_FM_NAME
 EXPORTING
 ARCHIVE_INDEX = TOA_DARA
 ARCHIVE_PARAMETERS = ARC_PARAMS
 CONTROL_PARAMETERS = LS_CONTROL_PARAM
 MAIL_RECIPIENT = LS_RECIPIENT
 MAIL_SENDER = LS_SENDER
 OUTPUT_OPTIONS = LS_COMPOSER_PARAM
 USER_SETTINGS = ' '
 ZXEKKO = L_DOC-XEKKO
 ZXPEKKO = L_DOC-XPEKKO
 ZNAST = NAST
 IMPORTING
 DOCUMENT_OUTPUT_INFO = IT_DOCUMENT
 JOB_OUTPUT_INFO = IT_OUTPUT_INFO
 JOB_OUTPUT_OPTIONS = IT_JOB_OUTPUT
 TABLES
 L_XEKPO = L_DOC-XEKPO[]
 L_XEKPA = L_DOC-XEKPA[]
 L_XPEKPO = L_DOC-XPEKPO[]
 L_XEKET = L_DOC-XEKET[]
 L_XTKOMV = L_DOC-XTKOMV[]
 L_XEKKN = L_DOC-XEKKN[]
 L_XEKEK = L_DOC-XEKEK[]
 L_XKOMK = L_XKOMK
EXCEPTIONS
 FORMATTING_ERROR = 1
 INTERNAL_ERROR = 2
 SEND_ERROR = 3
 USER_CANCELED = 4
 OTHERS = 5.
Regards,
Azaz Ali.

Issue in display format of a internal table in SMARTFORM

I m printing an internal table in smartform.when a particular field exceeds the coloumn's length.the rest of the texts come down to the next line.It can be shown in the below example.i m printing "+ text to be printed" in that particular coloumn.
Because of the size of the coloumn in table ,"ed." comes down as shown.
+ text to be print
ed.
I dont want ed to come directly down '+'.I want it to start from where 't' of 'text'
starts in the above line.
Notice that the requirement is to print "ed" after '4' spaces.
Please suggest what i need to do to get the desired result...
Regards
Rudra

Unfortunately there is no such way.

Issue in display format of internal table in smartform

I m printing an internal table in smartform.when a particular field exceeds the coloumn's length.the rest of the texts come down to the next line.It can be shown in the below example.i m printing "+ text to be printed" in that particular coloumn.
Because of the size of the coloumn in table ,"ed." comes down as shown.
+ text to be print
ed. 
its coming by default.
I want it like + text to be print
ed
I dont want ed to come directly down '+'.I want it to start from where 't' of 'text'
starts in the above line.
Notice that the requirement is to print "ed" after '2' spaces.And we can not use the string length concept bcoz not of characters after which the line comes down is not fixed.May be some change of setting in smartform will do the trick.
Please suggest what i need to do to get the desired result...
Regards
Rudra

Unfortunately there is no such way.

Error in passing internal table to smartform

Similar Messages

Maybe you are looking for