Error in Payroll Log

Hi experts,
Please let me know the cause for the error in payroll log for an  employee  evrytime his payroll is run.
Error is "no cumulation for quota type 01". Why such messages creeps in?
Regards,
Veena

Hi,
Could u please elaborate the issue little more ?
The issue seems to be related to absences quota assigned to the employee in Absence Quotas & attendance Quotas, check Infotype 2005 & 2006...whether proper quotas have been assigned to the employee.....rectify it and then run the payroll and check.
regards
Srijit R M

Similar Messages

  • Termination in operation Error in Payroll log

    Hi Experts,
    I am getting this error in Payroll log
    Termination in operation ERROR
    20141202
    UNE1********* <    ERROR                 NEG YTD IN  TCRT NOT  ALLOWED
    Basic entry in IT :
    /416 showing   amount 9.50-
    Please let me know how to resolve this issue.

    Hi,
    You normally face such problem when empployee is moved from one tax authority to other.
    Root cause of problem may be BTXRATE table is not maintaned properly.
    Please refer to this document.
    http://wiki.scn.sap.com/wiki/display/ERPHCM/Error+message+UNE1+ERROR+NEG+YTD+IN+TCRT+NOT+ALLOWED
    Hope it will solve your problem.
    Please keep us posted and once problem is resolved mark the answer correct to complete thread.
    Regards,
    Jignya

  • Errors in Payroll log

    Hi SAP Experts
    we have applied new HRSPS and we are testing it in QA server.i have the following errors in the payroll log,please i request you to give me some suggestions.I have this error for a payroll area XX
    1) STOP: Enhancement to variable key is missing ZZCC******        DVALEN 1   POUTWPCOSTC.       "CH=ECK MASTER= COST CENT=ER        = =
    00006575        Roberts   Jason           
    2)I have other error for payroll area YY
    No Entry in Table 512W for key 07  5515 for time 10/31/2006
    00007296  claudia jeans
    please help me
    regards
    sangitha reddy

    Hi ..
    The STOP error in the payroll log is a critical error. Can you give me some more details on this.
    The second error is missing configuration in the Wage type evaluation table. Make sure you have the configuration in place before you run the Payroll.
    Hope this helps. If so reward.
    Thanks
    shyam

  • Error in payroll log simulation INP6*****0 *

    sir i have got a error massage during payroll simulation.
    not found rule in the key INP6*****0 *

    Calculation rule UNAM accepts or rejects a cost center assignment from
        infotype 0221 (Manual Check).
      Access
        P0221   UNAM    GEN NOAB
      Procedure
        In infotype 0221 you can make a cost center assignment. Since this
        assignment takes place on infotype rather than wage type level, this
        calculation rule can be used to make an assignment for specific wage
        types. This is done by querying processing class 82. A specification of
        1 means that the alternative cost center assignment is accepted for the
        wage type in question. Specification 2 means the assignment is ignored.

  • Customizing error in work shedules in function GENPS in the Payroll log

    Hi All,
    I have created Holiday calendar for 2011 and regenerated the work schedule rule for the year 2011. while testing the same I am facing this error in the Payroll log with GENPS function in the Processing of time data node.
    This error is seen in all DEV, QAS and PRD clients. It is identified that there is a problem with Holiday calendar while assigning floating holidays.
    Kindly clarify me the following things
    1. how do we assign the floating holidays if the holiday exists in 2007 and 2008 but not in 2009 and 2010, again exists in 2011.
    2. our system is migrated from version 4.6c to ECC in November with support pack level 53
    3. this error is also reflecting for the rehired employees.
    Kindly provide solution, at the earliest as there is Payroll issue for some employees in this month.
    Thanks and regards

    Hi
    1. how do we assign the floating holidays if the holiday exists in 2007 and 2008 but not in 2009 and 2010, again exists in 2011.-Insert date under each holidays using SCAL t code
    2. our system is migrated from version 4.6c to ECC in November with support pack level 53
    Their may be chance of migration.u have to check all time related settings
    3. this error is also reflecting for the rehired employees.
    same as above
    Try this out
    u have to keep the from date to date in the tables and again regenerate the wsr ( start date and end date should be similar in daily work sc and in v_t508a table)
    V_T550A
    V_T508A
    one more is V_T551C
    with regards
    partha
    keep sharing and learning

  • Payroll log error

    Hi Experts and friends .
    Please see the below details and help me I am facing this problem since long time and not able to find the issue . Where is wrong . please help me
    yours
    jagan babu
    Payroll log
    General data
    Successful personnel numbers
    Rejected Personnel Numbers
    00006003
    01/2000 ( 01.03.2000 - 31.03.2000 )      Regular payroll run in 02/2000
    Initialization of Payroll
    Edit basic data----is displaying why I think here Basic Data processing has to display
    IF         SPRN           If special run
    ENDIF
    Get previous result of period for V0
    Import last payroll result
    Processing of time data
    GENPS                     Generate Personal Work Schedule PWS
    PARTT                     Partial period parameter
    IF    X064                Carry Out Shift Change Compensation
    ELSE                      Do not Perform Shift Change Compensation
    ENDIF
    PIT   X010 P01            Create valuation bases (addition)
    Input
    Processing
    9BAS Basic  Salary
    9CON Conveyance Allowance
    9EPF Employee PF
    *9HRA House Rent Allowance*
    *Termination in operation ERROR*
    20000170
    X0103*****         ERROR                =          =          =          =
    Basic entry in IT :
    A Wage type       APC1C2C3ABKoReBTAwvTvn One amount/one number        
                                3 9HRA House Rent 01                                             
                                Current entry in OT:
                               A Wage type       APC1C2C3ABKoReBTAwvTvn One amount/one number        
                               3 9HRA House Rent 01                                              .
    9BAS Basic  Salary
    Termination in operation ERROR
    20000170
    X0103*****         ERROR                =          =          =          =
                             Basic entry in IT :
                             A Wage type       APC1C2C3ABKoReBTAwvTvn One amount/one number       
                             3 9BAS Basic  Sal 01                                           
                             Current entry in OT:
                             A Wage type       APC1C2C3ABKoReBTAwvTvn One amount/one number        
                             3 9BAS Basic  Sal 01                                         
    Note :- Processing Classes 1 Assignment to Valuation bases  if put 5 in (basic pay )then error gets in basic pay  and not gets any error in HRA if Suppose in HRA I put Processing Classes Value 5 and Basic pay 3 then gets error HRA and not gets any error in Basic
    Z010 Determination of valuation bases ZCRP
    VWTCL 01   Processing class
    *ERROR      Cancel processing*
    --  0
    ADDWT *    OT   Output table
    1
    VWTCL 01   Processing class
    ----ERROR      Cancel processing
    0
    ADDWT *    OT   Output table
    1
    ADDWT *    OT   Output table
    ELIMI Z    Elim.time period ID
    ZERO= N    AmtNumRteTime = 0
    ADDWT /001 OT   Output table
    2
    ADDWT *    OT   Output table
    ELIMI Z    Elim.time period ID
    ZERO= N    AmtNumRteTime = 0
    ADDWT /002 OT   Output table
    3
    -ADDWT *    OT   Output table
    ELIMI Z    Elim.time period ID
    ZERO= N    AmtNumRteTime = 0
    ADDWT /001 OT   Output table
    ADDWT /002 OT   Output table
    2
    VWTCL 01   Processing class
    ERROR      Cancel processing
    0
    1
    2
    3
    4
    9

    Hi,
       can u try this one  
                                    that error in prcl-01
    in this /001&/002 technical wts are using for the storage of Amt(X010) and Rate(X013).All wts whatever we maintained in Basic Pay(0008) that only calculated.
    For this X010 and X013 PCRS are required,For /001&/002 technical wts of specifications are normally -5.Becoz in X013 it allows 5 regarding calculations purpose.
    In X010 Specification will be 0,1,2,3(which will Work) otherwise will be Error.(For Basic Pay Infotype Wts)
    If You insert 0-Specification for your wt it not(Amt) calculted in Valuaation Basis.
                        1-Specificaton for your wt the amt will be stored in /001
                         2-/002
                         3- /001&/002
    In X013-Calculates rate into /001&/002.For this Specification will be 5 in PRCL-1
                        RTE-TSDIVP(Comes from Basic Pay Infotype Monthly Hrs)
                        DIVID ARR(AMT(?001&?002 (Wts Amt)/RATE(TSDIVP-Keeps in rate)
                        ZERO=A-It Makes amt has 0  in /001&/002
                        ADDWT *
    I Hope it will use........!
    Regards,
    Chikky!

  • Error occured in Log  PO169 savings plan under BADI

    Hi,
    When i am running a payroll for 03/15/2011 for one perner its showing error  in the log under po169 process savings plan under BADI  below is the error , how we can find BADI name  can any one help me
    Error occured during currency conversion from to USD
    Thanks
    Srinath

    Hello Srinath,
    Please, could you try Badi PBEN_PAY0010-HR_BEN_US_PAY0010?
    Hopefully this helps.
    Kind regards,
    Graziela

  • No Entry In table T7INOP in Payroll Log

    hi Guys,
    When we are running payroll this error "No entry in table T7INOP" is coming in payroll log against P0588 ie other statutory deduction
    Any Idea
    Thanks

    ya thats true now the error is coming LWF/140  & as usual no entry in table T7INU3,What the LWF/140 is all about
    Thanks

  • Finding errors in payroll or FI posting

    Hi,
    How to read the errors in payroll and FI postings? and from the log how to solve the errors? can any one thro light on this.
    chandu
    09899440976

    Hi,
    we cannot analise the what errors might come.
    1.One of the frequent error might be " Posing Balance not cleared"
    This will occur if the employees earnings are less than the deductions and so he is getting the negative pay.
    This error might also rise when there amounts are not balanced ie. debited amount should be credited anc vice versa in order to get 0 balance in the balance sheet.
    2.Other errors might be for posting characteristics. when symbolic accounts are not appropriately created.
    3. When posting periods are closed are not open. Contact FI in case of this error so that they can open they periods. This errors comes moslty during year end closing or new financial year entry
    4. GL account not created. Assign appropriate GL account to the sybolic accounts with respect to the wagetype from IMG config for posting characters.
    sometimes, there can ba a problem of authorisation as well which will not let post the documents.
    Most important, all the wage types which are invloved in posting should have respective GL accounts for perfect posting. and also a cost center has to be assigned to the employees if the GL is has characterisc of cost center being mandatory.
    .....thats all which i could remember...
    --Pranitha

  • Payroll Log, correction code, correction indicators

    Hi Gurus Please help me with the below question thanks for your valuable time?<br />
    What is a Payroll Log ?
    What is a correction indicator which is assigned to infotype 0003?
    What is a payroll correction run code '" w "?
    Thanks for your valuable time for reading the question and replying to it, please explain with examples...
    Warm Regards,
    Zulfikarlos
    A simple search in the forum will helps you to find out the answers
    Edited

    Hi Zulfikarlos,
    Payroll Log: It shows the entry and output of wagetypes in pcr's. Here you can see how the wage type has been evaluated, calculated etc. It also shows whether there is any error in payroll run for the employee. Normally when payroll is run for large number of employees you shall not display payroll log as it can cause runtime error. But even you do not choose payroll log when you run payroll payroll log will be displayed for employees who have error in payroll.
    About correction run code and correction indicator in SAP help i says:
    "The system sets the Payroll correction indicator if an employee is rejected by the payroll program because of errors in his or her master or time data. The personnel numbers of employees rejected by the payroll program are written to matchcode W on the basis of the Payroll correction indicator. If you want to delete the rejected employee from matchcode W, you can do so by deactivating the Payroll correction indicator ."
    http://help.sap.com/saphelp_40b/helpdata/en/48/35c7f74abf11d18a0f0000e816ae6e/content.htm

  • WebClient Error - Failed to log on to the comm. mgmt. software

    Hi, following the CR410 i have created a webclient profile/ framework, and assigned the profile to an org unit.
    now when try to open the webclient using crm_ic, i am getting the above error on the IDES system.
    <b>"Failed to log on to the communication management software system"</b>
    <b>Details of the above error</b>
    Diagnosis
    An error occurred while logging in to the communication management software system.
    System Response
    The multichannel services are not available. You will not be able to work with contacts such as phone calls, e-mails, or chat sessions.
    Procedure
    Contact your system administrator.
    Procedure for System Administration
    Review the ICI trace.
    what could be error...
    Thanks,

    Have you configured CTI with IC WebClient? If yes under IC WebCLient profile look for CONTACTCENTER function profile and enter correct profile.
    If you do not have CTI in place make sure that CONTACTCENTER entry is blank under IC WebClient profile.
    Thanks,
    Thirumala.

  • Error 1017 received logging on to the standby

    Hi anyone,
    Please help me...
    i have database running on Oracle 10gR1 EE (10.1.0.4.0) on Linux Red Hat. and this server is replicate to DR server for backup. we change 'SYS' password about a week ago and nothing occur until today, the database is not connecting to DR server. here is the error obtain from the alert_log file. is there i 've missed anything when changing SYS password?
    somebody please help me.. im in horror now.
    thanks in advance.
    -Nonie

    forgot to paste the error.
    Mon Jan 21 14:54:20 2008
    Error 1017 received logging on to the standby
    Check that the primary and standby are using a password file
    and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
    and that the SYS password is same in the password files.
    returning error ORA-16191
    It may be necessary to define the DB_ALLOWED_LOGON_VERSION
    initialization parameter to the value "10". Check the
    manual for information on this initialization parameter.
    -Nonie

  • Oracle error 1012 ("Not Logged On") & AUTOTRAN=Y

    Hi.
    I have a problem trying to access an Oracle 8.0.6
    database from a 6.5 Tuxedo server.
    Both TMS and server execute tpopen correctly
    All services are declared as AUTOTRAN
    Everything seems to be OK according to the logsgenerated by Oracle XA libraries
    However, I always get the Oracle error 1012 ("Not Logged On")
    when executing SQL statements from my pro*C server.
    I just can't figure out why this error occurs.
    I also tried to explicitly open a transaction from the client,
    but the result is exactly the same (tpbegin is successfull,
    however).
    Could someone help me to make this work ?
    Thanks.

    Solved by removing "DB=<db>" from my OPENINFO string, as far as this parameter
    should only be used when using proc*C "EXEC SQL ... AT <db>" statements.
    "Mathieu Chauvin" <[email protected]> wrote:
    >
    Hi.
    I have a problem trying to access an Oracle 8.0.6
    database from a 6.5 Tuxedo server.
    Both TMS and server execute tpopen correctly
    All services are declared as AUTOTRAN
    Everything seems to be OK according to the logsgenerated by Oracle XA libraries
    However, I always get the Oracle error 1012 ("Not Logged On")
    when executing SQL statements from my pro*C server.
    I just can't figure out why this error occurs.
    I also tried to explicitly open a transaction from the client,
    but the result is exactly the same (tpbegin is successfull,
    however).
    Could someone help me to make this work ?
    Thanks.

  • Error reading job logs of Apps server from Central Instance

    Dear Gurus,
    We have newly installed system with one CI ( cluster environment) and 2 application Instances.
    Systems are recently installed by other team. I am looking into support part after handover.
    We have noticed below error while reading failed background job logs from our CI. If suppose any job is failing, we can read respective job log from that application instance but it throws error while reading job log from CI to either of application instance.
    I checked /sapmnt/SID/global is shared among all 3 servers and i am successfully able to "Touch a" from applications instances.
    Even though i have given "777" permissions to all folders like  /sapmnt/SID , /sapmnt/SID/global , /sapmnt/SID/global/400JOB*
    I am not able to read job log from CI , for same failed job I can read job log from respective application instance.
    Error log :
    Error reading job log JOBLGX00080700X39290
    Message no. BT167
    Diagnosis
    The background processing system was unable to read the job log named in the message.
    This message suggests that there is a problem with the TEMSE storage system of the SAP system.  The TEMSE storage system is a repository for temporary objects, such as job logs and spool requests. Job logs are always stored in the TEMSE as operating system files.
    This error occurs if the TEMSE system is not able to find or access the file that contains the text of the job log that you requested. Possible causes for the loss or unavailability of the job log include the following:
    Someone deleted the required TEMSE file (from the operating system, not from within the SAP system).
    A CRON (or equivalent scheduler) job has deleted the TEMSE file.
    The file system in which the TEMSE stores its files is not mounted or is not accessible (NFS problem, disk failure, or similar problem).
    The TEMSE reorganize or consistency check functions were used within the SAP system and deleted the job log.
    SM21 logs :
    Error 2 for write/read access to a file. File = /usr/sap/SID/SYS/global
    BP_JOBLOG_SHOW: Failed to display jobs. Reason:
    > Error reading job log JOBLGX00080700X39290
    Strange this is I can check failed job log on one application instance frfom other application instance but not from CI.
    Kindly throw some lights where to check.
    Regards,

    Hi Shravan,
    I guess it is related to permission to /sapmnt/SID/global folder. Please ensure owner is sidadm:sapsys in all the systems viz CI, App servers etc.
    Check the mounting options are correctly set with read/write mode.
    Hope this helps.
    Regards,
    Deepak Kori

  • Error in system log

    HI all,
    this is not a security query, but I need help in this regard.
    Following error msg i showing in system log. I'm getting this error whenever i'm trying to read the Job in SM37. And in some cases I'm unable to see the spool list which is generated by the bg jobs. what coul be the reason?
    <b>> Error reading job log JOBLGX15165600X64603
    Error 2 for write/read access to a file. File = /usr/sap/PRD/SYS/global/999JOBLG/0001X15165600X64603
    BP_JOBLOG_SHOW: Failed to display jobs. Reason:</b>

    Thanks Jose
    Porblem is solved.
    /sapmnt/PRD/global and profile are not mounted on that server.
    Thnak u so much for ur cooperation.
    Regards,
    Raja

Maybe you are looking for