Error in pc editor after installing microsoft windows 2013

After we have installed microsoft windows 2013 attached error message is appearing in the po, header text.  What action can be taken to solve this?   Thanks in Advance.

Hi,
you must upgrade the SAPGUI version at last level the patch available.
Regards
Luix

Similar Messages

  • Captivate 7 Stuck Loading after installing Microsoft Office 2013

    Before the problem started, I initially had Adobe Captivate 5 (not 7) and have been working fine until I installed Microsoft Office 2013. As I tried to start Captivate 5, it gets stuck on the loading page—the welcome screen never shows up. After I checked this blog on the forum, which is blaming 3rd party fonts that may cause this issue to happen—I never installed any 3rd party fonts—I wasn’t sure if Office 2013 come with additional fonts that are not compatible with Captivate 5. So I removed Captivate 5 and installed the trail version of Captivate 7 (32 bit) thinking that Captivate 7 will be okay with any additional fonts that come with Microsoft Office 2013. Still having the same issue—can’t get the welcome screen—stuck on the loading screen. Regardless, whether I try to start the software or try to open an existing Captivate file by double clicking.
    As per another blog on the forum, I also tried removing/renaming Captivate folder located in C:\Users\MYUSERID\AppData\Local\Adobe but that didn’t help either. Now I have completely removed Captivate 5 folder from the directly as I have installed Captivate 7—still stuck with the same problem.
    I am running Window 7 Professional (32 bit), have the latest version of Java SE 7 Update 25, downloaded latest AIR update and of course every time removed any software, I did restart the computer to update the registration keys before installing a newer version of a software.
    You help and advice will be greatly appreciated! Many thanks!
    Regards,

    Hello Parth.
    Many thanks for your help! It worked!
    After deleting every font I could (out of 820 fonts, ended up deleting 687 fonts--only 133 remined that were proected-system fonts) I am successfully able to launch Captivate 7. I guess Microsoft Office 2013 did install some fonts that conflicted with Captivate 7 (even version 5). By the way, Myriad Pro, my favorite font when it comes to Captivate, is also system-protected that I couldn't delete. I now just have to work on Part B, and slowly reinstore the deleted fonts in small batches to keep Captivate working.
    Thank you again for the tip ... much appreicated!
    Regards,
    Farooq

  • Launching VB6 Editor after installing Visual Studio 2013 results in "Please wait while Windows configures Microsoft Visual Studio..."

    I have had various versions of Visual Studio installed beside Visual Basic 6.0 Enterprise for some time with no problems, most recently Visual Studio 2012 Premium.
    I recently installed Visual Studio 2013 Premium, and now every time I open VB6 I get a dialog that says "Please wait while Windows configures Microsoft Visual Studio Professional 2013" that shows a progress bar. After it finishes (30 seconds or
    so), it launches again and again and finally VB6 will open. This happens with each instance of VB6, regardless if I've already done it once and never run VS2013 in between.
    If I cancel the dialog, I get this error message in a dialog: "Error 1712. One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible." Several more "Please wait"...
    dialogs will appear and if I continue to cancel, eventually I'll get the VB6 editor. It appear to work fine despite the error messages.
    It seems to me that the VS2013 installer flagged some dll's or other files to be rolled back whenever starting VB6. It doesn't appear to be necessary, and I'd like to avoid playing the "Please wait" wack-a-cancel-button game before launching each
    instance of VB6 (or waiting several minutes for no reason). So how do I fix this?
    Note: I've seen something similar happen in Outlook on a different PC when upgrading from 2010 to 2013. The same sort of "Please wait"... dialog would appear each time I opened Outlook. Judging by the "similar" questions that popped up when
    entering this forum post, I'd say this is a general problem with upgrading older versions or installing newer versions of major Microsoft software side-by-side.
    /* Don Reynolds */

    I found the answer!
    I was having the exact same issue, and I was search for a solution and I happened across the following thread: http://social.msdn.microsoft.com/Forums/en-US/f4b0fd38-f4f9-41ea-bd8d-834203a175d2/building-visual-studio-2010-project-triggers-please-wait-while-windows-configures-visual-studio?forum=vssetup&prof=required
    Scroll a small bit down, and there is a post by Barry Wang explaining that you need to use event viewer to find out what is missing. Anyway, I opened event viewer, then open VS 6, then hit refresh in the event viewer (under Windows Logs -> Application)
    and saw a warning message from MsiInstaller. It gave me the following message:
    Detection of product '{9C593464-7F2F-37B3-89F8-7E894E3B09EA}', feature 'Visual_Studio_Professional_x86_enu', component '{E3FF99AA-78B9-4A06-8A74-869E9F65E1FE}' failed.  The resource 'C:\WINDOWS\Microsoft.NET\Framework\URTInstallPath_GAC\' does
    not exist.
    I opened an elevated command prompt, I navigated to the C:\WINDOWS\Microsoft.NET\Framework folder and verified that 'URTInstallPath_GAC' didn't exist, and then I did "md URTInstallPath_GAC".
    Closed and reopened VS 6, and it instantly opened - no "Please wait" message.
    Now this may or may not be the same problem you are having (problem is - I have had it happen on two separate computers now with VS 6 and VS 2013 installed), but it should point you in the right direction. In fact, you should be able to use the Event Viewer
    for anytime the "Please wait" message shows up for any application, and then once there find out what is really missing.

  • HT5639 After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do?  i have using bootcamp 5

    After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do?  i have using bootcamp 5

    if it's restarting directly into an error, you can try troubleshooting (might be painful) or re-install windows with boot camp

  • Detailed walkthrough of Installing Microsoft Windows 7 or Windows 8 on your Mac

    This is for anyone wanting the step by step instructions for installing Microsoft Windows 7 or 8 on their Mac. I have the Mid 2010 model iMac with the bluetooth keyboard and touch gesture mouse. If you have similar or just want to know how to do it step by step, please watch my tutorial. Hope it helps.
    http://youtu.be/rTPoyElIgZg

    My guess, you have not seen the threads and posts about Windows 8 on here before posting.There are no stuck threads and people tend to not look or when they do not find threads that are helpful (try search and "month" means "Aug" not the last 30 days and it is harder now to do searches than it use to be or than just using Google!
    Common issues? Trouble just downloading drivers. Burning ISO. Using external USB-DVD or flash installer drive. Lack of internet access!! audio, graphic drivers, graphic switching between Intel and ATI.
    Someone wrote a nice guide "How to install Windows on Mac Using Boot Camp" o weeks ago, it was nice, but I CANNOT find it again (I should have bookmarked it and put the link in the quick reference cheat sheet. They seemed to not be aware of the help on the Boot Camp Support page.
    Mac 101: Using Windows on your Mac via Boot Camp
    https://support.apple.com/kb/HT1461
    Boot Camp 4.0, OS X Lion: Frequently asked question
    http://support.apple.com/kb/HT4818
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf 
    create a Windows support software (drivers) CD or USB storage media
    http://support.apple.com/kb/HT4407
    Boot Camp Assistant can burn Windows software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.  https://support.apple.com/kb/HT4569
    Installation Guide Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    http://www.apple.com/support/bootcamp/
    when trying to launch the "Boot Camp Control Panel", but I just stumpled upon a solution.
    I created a new Windows user, that was not Administrator. When I logged in Boot Camp updateded something and asked me to restart the computer.
    After restarting and logging in with my new user, I could start the "Boot Camp Control Panel" configure tap to click and use F1-F12 as function keys.
    Then I changed the new account to Administrator and now the control panel can not be startet again... but my settings remained... only on the new user only though.
    ============ 
    I had problems with windows 7 after the installation using boot camp. The GT 650M was not showing up as the graphics adapter. I fixed the problem by inserting my windows support software CD a second time. I did not let it use auto run.  I went into the Windows 7 directory and then into the Nvidia directory and ran setup.exe. This installed the Nvidia drivers for me. If this works correctly, you will have an Nvidia control panel available to you. I set the resolution to 2880x1800. I also set windows to 200% magnification.
    I think what happens is that after you install windows, and then run the windows support CD, the main boot camp setup script seems to stop on the nvidia driver install--everything else installed correctly.
    The 2012 MacBook Air suffers from an EFI firmware bug that under Windows blocks turbo mode.
    Disable Windows 8’s Adaptive Brightness to Fix Dark Screen Problems
    2012 MacBook Air plagued by audio noise with Apple's Thunderbolt display
    Intel Windows 8 Graphic Driverhttp://www.guru3d.com/news/intel-whql-graphics-driver-windows-8-download/
    http://www.zdnet.com/blog/hardware/windows-8-an-installation-walk-through/14768
    http://huguesval.com/blog/2012/02/installing-windows-7-on-a-mac-without-superdri ve-with-virtualbox/
    I did manage to make the trackpad work. You need to install trackpad++
    (http://www.techspot.com/downloads/4967-trackpad-control-module.html), it will enable the trackpad driver on boot camp. After you install the trackpad++, trackpad++ will complain something. ingnore it.  You should be able to enable trackpad. And you can now even uninstall the  trackpad++, the trackpad will sill work. 
    brightness, what graphics card are you using? It might be due to the auto adjusting brightness running there. You can go to your power options, edit the one you are using  (Change plan settings >> Change advanced power settings) and look for Batteries >> Enable adaptive brightness and disable the one you are using. After that, the scrollbar for adjusting brightness in power options should work again.
    HDMI audio in Windows 7 64 bit 
    reinstalled the Intel video drivers and audio worked immediately.
    My config:  2011 Mac Mini 2.3, Intel 3000HD video
           .   .       upgrade to 8GB ram
    Samsung 8000 series LED TV connected with HDMI
    Memorex external BluRay writer(USB only power)
    For Windows 7 install, I tried installing with the 64 bit DVD but this failed as documented elsewhere.
    Instead, setup with USB drive, follow instructions available in bootcamp
    After partitioning drive with boot camp and reboot, install Windows 7 with install wizard.
    When asked whether to allow automatic updates say 'no', then complete installation and run boot camp tools for Windows.
    Because the network driver gets installed prior to the Intel video driver, Windows will install the Windows Update Intel video driver which breaks HDMI audio.
    When auto updates are off, the Intel video driver that is correct gets installed last.  HDMI audio works with this driver.
    Apple should install the Intel video driver first and it would solve this problem.
    I now have full blown 3D BluRay support on the MacMini with TruHD audio, fantastic!
    https://discussions.apple.com/thread/3408749
    Boot Camp: FireWire devices may affect Windows 7 responsiveness if connected to an Apple Thunderbolt display
    http://support.apple.com/kb/TS4190Products Affected
    Apple Thunderbolt Display (27-inch), Boot Camp, Windows 7
    Symptoms -
    When using Boot Camp and Microsoft Windows 7, FireWire (IEEE 1394) devices may affect system responsiveness if they are connected to the FireWire port of an Apple Thunderbolt display.
    MacBook Pro audio sound fixhttp://realitypod.com/2010/07/macbook-pro-no-sound-in-windows-7-final-fix/
    bluetooth connection is incredibly unreliable/intermittent when in Windows (I run Windows 7 64-bit and Boot Camp 4.0, and got both devices connected without any trouble via Bluetooth).
    https://discussions.apple.com/thread/4079148
    After much testing, I have found the cause of lagging/jumpiness on the Bluetooth Magic Mouse and Magic TrackPad in Boot Camp. Hopefully this will help others:
    The drivers for the Broadcom 802.11n Wireless Adapter have a setting called "Bluetooth Collaboration" that is Disabled by default. Enabling this option removes the problem instantly. My Magic Trackpad now works flawlessly, even if I stand 6 metres from the machine. It now works just as well as under Mac OS. The setting can be found under:
    Control Panel > Device Manager > Network Adapters > Broadcom 802.11n Network Adapter (right click and choose "Properties".
    Under the "Advanced" tab, highlight the setting named "Bluetooth Collaboration", then change it to Enable. Then click OK.
    I narrowed the problem down to the wireless card by disabling ALL startup services and processes for Windows, then re-enabling one by one.
    As soon as I enabled the Windows Wireless Service, the problem came back.
    Similarly, disabling the Wireless Card inside the Network and Sharing Center (or Device Manager) removes the problem.
    This led me to believe it must be a driver issue with the wireless card, since the problem didn't occur with the Magic TrackPad under Mac OS, or on my mother's Windows 7 64-bit computer.
    So when I went into the Driver Properties to check for an update, I found this setting about Bluetooth Collaboration.
    All Apple notebooks use the Broadcom card (and have done for years), so this driver is installed for almost anybody using Boot Camp on an Apple notebook. I'd assume this problem would affect anybody using Boot Camp + wifi + a Bluetooth device.
    Wireless Connection problem using windows in a Mac.
    Re: Connection problem using windows in a Mac. 
    May 4, 2012 10:08 PM (in response to Chris9393)
    Windows 8 to manage your mobile broadband use for you
    By Peter Bright
    Windows 8 will contain built-in support for mobile broadband devices and smarter use of metered Internet connections, as detailed in the lastest post on Microsoft's Building Windows 8 blog.
    Most 3G mobile broadband connections are subject to usage limits, and keeping track of data usage at the moment normally means running an application from the mobile operator, or even checking on their website. Windows 8 will have its own usage counters so that users can keep track of how much data they've burned through over the current billing cycle.
    Windows 8's faster Wi-Fi connectivity, with hot spots being found and connected to in under a second, and its new support for Wi-Fi hotspots that use authentication portals. Instead of having to open a browser to enter a username and password, it will be possible to type credentials directly into Windows itself.
    How to view error message:
    From Control Panel-> Admin. Tools-> Event Viewer-> Windows logs:
    Check Application and System Folders for Red highlit messages. Note that you can right-click clear these log folders.
    Memtest
    This is a step by step guide with audio and video to explain how to use memtest to see if your memory is defect:
    Another thing to add is that some errors will not be found on the first pass, best to do at least 3 passes.
    http://www2.corsair.com/training/how_to_memtest/
    Memory that "seems" to work in OS X (Lion, ML and earlier) but fails and does show errors with Windows and shows up in memtest - so don't trust your RAM just because it seems okay.

  • Error 0x80070015 when trying to install of windows 8.1 enterprise in My DELL 755

    Hi, I am receiving an error 0x80070015 when trying to install of
    windows 8.1 enterprise in
    My DELL 755
    and i get 87% and then get this error
    this is my partitions
    160GB HDD
    C: 28.8 GB "ٍSystem" "I am going to Install in this partition"
    D: 30 GB
    E: 30 GB
    F: 30 GB
    G: 30 GB
    And i see this question
    http://social.technet.microsoft.com/Forums/windows/en-US/a701800d-886e-4509-8abd-0891c2c84064/error-0x80070015-on-clean-install-of-windows-81-enterprise?forum=w8itproinstall
    but i don't understand should i delete all my partitions or just only the " C:\ " and "100~200MB" system partition
    did he  mean delete Only the both " C:\ " and "100~200MB" system partition ?
    cause I don't have "100~200MB" system partition just " C:\ "
    When i install i just Format the " C:\ " then press
    Next
    Now should I just select Delete the " C:\ "
    partition 0 "System" and recreate the partition again and press
    Next
    to Continue the installation  
    Or what i should do ?

    OMG
    that's not possible i have a lot of Important data in all non-system partitions
    i am using Oracle VM VirtualBox "and i free a lot of Space to Test the Iso File"
    and i install Windows 8.1 in the VirtualBox
    but i see when i try to install Windows 8.1 in the real machine the partition is
    "system"
    and when i install Windows 8.1 in VirtualBox the partition is
    "Unallocated"
    it install but it create a
    320MB partition "system"
    9.8GB partition "primary"
    then i choose the primary and the installation complete and i have the Windows 8.1 in VirtualBox Now
    Now i don't know should I just select Delete the " C:\ "
    partition 0 "System" and recreate the partition again
    to make 320MB partition "system"  and the rest of the partition to Windows 8.1 "28.8 GB"
    Like what happen in the VirtualBox
    Or what i should do ?

  • Sun X4150 Can not install Microsoft Window 2003 Standard 32-bit OS

    I have try to install Microsoft Window 2003 Standard 32-bit OS in X4150,but put the OS Media and the output show below error messages
    "The system is not a supported platform"
    I check the sun system handbook and releated document for this X4150 product,it have been certificated.
    I try to install with Window 2003 Standard 64-bit OS,it work ok.The Window 2003 Enterprise 32/64 bit,it work ok also.
    Have change the CPU Speed (lower),Update the BIOS,ELOM,the same situration.
    Have anyone have this experience with the installation of window 2003 Standard 32-bit.
    Tks for your help.

    Hi,
    Have you tried installing using the Sun Installation Assistant disc, for more info see the Sun Installation Assistant for Windows and Linux User's Guide:
    http://docs.sun.com/app/docs/coll/x4150

  • Firefox Not Responding after Installing Microsoft Office 10

    After installing Microsoft Office 10 (student and home edition) on my laptop, I noticed that Firefox is going into the state 'Not Responding' every time I access it - it takes about 10 secs to 'think' and then comes back online. It continues to do this every time I want to access a new page, new link, click on mail in Yahoo Mail, etc. Has anyone experienced this issue?

    1) Check the $IAS_ORACLE_HOME/Apache/JServ/etc/logs/jvm
    has servral logs for OACoreGroup Servlets that are initialied
    2) You might have to enable the debug option in jserv.properties and jserv.conf
    (find IsItWorking.java in Metalink for the appropriate note )
    3) If this is 403 forbidden then check trusted.conf alongside httpd.conf
    pls keep posted about how this issue got resolved.
    Sunil
    JSP not responding after installing 11.5.10.2 on IBM
    HACMP
    i have finished installing Oracle applications
    11.5.10.2 on IBM clusters (HACMP version 5.1)its a
    multinode setup with mutual failover. other
    applications are working fine. the installation went
    well. but the final part on the middle tier , during
    the post install checks it says JSP not responding. I
    checked the apache error-log and saw the follwoing
    entry
    [Sun Apr 23 21:04:21 2006] [error] [client
    172.29.200.74] client denied by server configuration:
    /appl/oracle/devcomn/portal/
    DEV_erpappssrv/oprocmgr-service
    >
    that bafles me because that ip address was not used
    in the installation. its the persistent ip address of
    the HACMP. the service ip that was used in the
    configuration file was 172.29.200.75
    however there is no mention of this in the error
    log.i also edited the oprocmgr.conf in the
    Apache/conf directory after which i dont get the
    error however the servlets pages then hangs and
    returns page cannot be displayed error on internet
    explorer. no error is registered on the error log.
    the jdk am using is 1.4.2 which is the recommended
    one.
    what this means is that i cannot access the self
    service pages and as you know you need self service
    pages to access the application in 11.5.10.2
    i opened a TAR with oracle on 8th April 2006 and till
    today i have not been able to get a solution.
    I am hoping that i will get someone in this forum who
    has met a similar problem or who has an insight into
    how we can solve this problem already am weeks past
    the target go live!!!
    Please Kindly help
    Jeremiah Ochieng

  • Error: 0x8007041D on a computer running Microsoft windows non-core edition, run 'slui.exe 0x2a 0x8007041D ' to display the error text

    OS : Windows Server 2012 R2
    Windows Activation Error
    Error: 0x8007041D on a computer running Microsoft windows non-core edition, run 'slui.exe 0x2a 0x8007041D ' to display the error text
    Description :
    The server did not respond to the start or control request in a timely fasion

    Try the following:
    Uninstall and Re-Install the PK
    Open up an elevated cmd and enter the following commands:
    slmgr –upk
    This will uninstall the current Product Key
    slmgr –cpky
    This will clear the product key from the registry
    slmgr –rilc
    This will re-install the System License Files
    slmgr –ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
    This will install your Product Key
    slmgr –ato
    This will activate your Product Key
    NOTE: Useful commands for SLMGR
    -dli -> Display License information
    -dly -> Display detailed License Information
    -upk -> Uninstall Product key
    -ipk -> Install Product Key
    -ato -> Activate Windows
    -rearm -> Reset the Licensing Status of the machine
    This post is provided AS IS with no warranties or guarantees
    , and confers no rights.

  • Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524

    Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524,
    The system shows everything is ok.
    Please any help greatly apreaciated.
    Thank you
    Valentin

    ValentinT, welcome to the forum.
    There are no drivers available for Windows 8.  I suggest checking in the Control Panel/Sound/Recording to assure that your microphone is selected.  It seems that the Sound is one area that gets changed when updating to Win 8.1.  At least, this is what happened to me.
    Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Error in staring JDev11g after installing on Vista.

    Hi,
    I am getting the following error while starting JDeveloper after installing.Can any one provide a pointer on what could be done to fix this.
    java.io.IOException
    at oracle.ide.marshal.xml.StructureIO.loadUsingSAX(StructureIO.java:251)
    at oracle.ide.marshal.xml.StructureIO.loadImpl(StructureIO.java:167)
    at oracle.ide.marshal.xml.StructureIO.loadImpl(StructureIO.java:156)
    at oracle.ide.marshal.xml.HashStructureIO.load(HashStructureIO.java:46)
    at oracle.ideimpl.extension.RoleManagerImpl.getRolePreferences(RoleManag
    erImpl.java:80)
    at oracle.ideimpl.extension.ExtensionManagerImpl.runRoleSelectionDialog(
    ExtensionManagerImpl.java:1166)
    at oracle.ideimpl.extension.ExtensionManagerImpl.initialize(ExtensionMan
    agerImpl.java:1029)
    at javax.ide.Service.getService(Service.java:68)
    at javax.ide.extension.ExtensionRegistry.getExtensionRegistry(ExtensionR
    egistry.java:400)
    at oracle.ide.ExtensionRegistry.getExtensionRegistry(ExtensionRegistry.j
    ava:176)
    at oracle.ide.IdeCore.startupImpl(IdeCore.java:1348)
    at oracle.ide.Ide.startup(Ide.java:698)
    at oracle.ideimpl.DefaultIdeStarter.startIde(DefaultIdeStarter.java:35)
    at oracle.ideimpl.Main.start(Main.java:184)
    at oracle.ideimpl.Main.main(Main.java:146)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.ide.boot.PCLMain.callMain(PCLMain.java:72)
    at oracle.ide.boot.PCLMain.main(PCLMain.java:64)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.classloader.util.MainClass.invoke(MainClass.java:128)
    at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:
    190)
    at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:90)
    at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:66)
    at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:55)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.ide.boot.Launcher.invokeMain(Launcher.java:713)
    at oracle.ide.boot.Launcher.launchImpl(Launcher.java:115)
    at oracle.ide.boot.Launcher.launch(Launcher.java:68)
    at oracle.ide.boot.Launcher.main(Launcher.java:57)
    Caused by: org.xml.sax.SAXParseException: <Line 1, Column 1>: XML-20108: (Fatal
    Error) Start of root element expected.
    at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)
    at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
    at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidati
    ngParser.java:373)
    at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingP
    arser.java:314)
    at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:225)
    at oracle.xml.jaxp.JXSAXParser.parse(JXSAXParser.java:292)
    at oracle.ide.marshal.xml.StructureIO.parseWithSAX(StructureIO.java:266)

    So you tried to install jdev on your iPhone and got this error?
    Come on help us to help you. Provide more info, check the forum sticky post 'read before posting'
    Timo

  • After installing lion, windows 7 boot option disappeared.

    I had a macbook with snow leopard and windows 7 together. Yesterday I installed macosx lion. After installing it, windows 7 selection disappeared  in boot  menu. I tried to select boot options by  pressing "alt key".  I saw a new partition which is Recovery HD. There was no bac up files. So what happened to my windows 7 part? How can I restore system?
    I tried to use disk utility in lion.  I realized that the name of the windows 7 part was changed, now it is disk1s4 but before it was disk0s3 etc..
    I removed my macbook HDD and attach with as external HDD to a desktop computer. But I could not find any solution.
    In a forum, Someone suggest to create RAW diskimage  by using a program named "active and undelete"
    Firstly delete windows 7 partition on HDD and create new partition. And then  set up it with windows 7 DVD  and use RAW diskimage and restore your old settings.
    is this logical?
    Or is there any simple way to rescue my system?   For example If I reinstall Snow Leopard, come my windows 7 partition back?

    I could not remember this selection but if I choose one, I choose complete install..

  • After installing the windows 7 on the Macbook pro, i accidentally disabled the Macintosh hd and Recovery Hd and now now cant see them on start up

    After installing the windows 7 on the Macbook pro, i accidentally disabled the Macintosh hd and Recovery Hd and now now cant see them on start up
    I need to boot to macintosh but i cant see the drive nor to restore to the fastory settings through recovery HD, What can i do

    hold down the option key during boot it give you the option of what parition you wish to boot into

  • If I were to buy the 7 Home Premium SP1 64bit, System Builder OEM DVD 1 Pack from Amazon to install Microsoft Windows 7 on my Mac, would it be compatible with my computer when I put it in bootcamp? (I have all of the current software updates)

    If I were to buy the 7 Home Premium SP1 64bit, System Builder OEM DVD 1 Pack from Amazon to install Microsoft Windows 7 on my Macbook Pro, would it be compatible with my computer if I put it in bootcamp? (I have all of the current software updates)

    In order to run Windows Applications, you must own the applications and, since they require Windows, you must own Windows. There are technologies like wine that will allow Windows applications to run without Windows, but they tend to be flakey at best.

  • I installed Microsoft Windows 8.1 but i don't know which drivers to install.

    Hi, the trial period of the windows 8.1 installed at my HP 14-d003tx Notebook PC expired already so I installed a new windows 8.1 Pro 64-bit OS. I went here: http://support.hp.com/us-en/drivers/selfservice/HP-14-Notebook-PC-series/6529958/model/6753958 to check the drivers to be installed but I got confused because I don't know which is which or which drivers I need to install in my laptop. For example, for the bluetooth and wlan drivers, there are 2 drivers to choose from, MediaTek(Ralink) 802.11 Wireless LAN (WLAN) Adapter and Mediatek 802.11 Wireless LAN Adapter Driver, same for the bluetooth and other drivers. Can you please assist me which drivers is compatible or which drivers do I need to install at my laptop? Or how will I know which drivers I need to install. Thanks!
    This question was solved.
    View Solution.

    Hi:
    Please see my reply to your other post at the link below...
    http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/I-installed-Microsoft-Windows-8...

Maybe you are looking for