Error in PC while transporting from Qual to Prod
Hi All,
i am getting the error while tarnsporting the PC from qual to prod.I have introduce only AND event in PC and change one Attrib Change step.
In TR i have collected PC,Event,Attrib Change step.
But while transporting it result in error at one DTP step.I have checked the corresponding DTP is present there in Prod but with diffrent technical name.
As far as i know it should have replace the corresponding DTP present in prod..
Is this the error from BI side or connection error between system from basis.
Or is this something related to system being out of sync with eachother.
i am also showing you the error i get as below:
Version 'M' of chain ********* was saved without checking
Results of check for process in chain :
Results of check for process in chain :
Results of check for process *DTP_LOAD DTP_4KYC4AJY4UAPLDJ4MZE8YYUYL in chain* ZA_SD_006:
I got error in this DTP
Results of check for process LOADING ZPAK_4GJLZPDJRV346VYKJLGKTDK7S in chain ZA_SD_006:
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Delete Mode)
Start of the after-import method RS_RSPV_AFTER_IMPORT for object type(s) RSPV (Delete Mode)
Start of the after-import method RS_EVEN_AFTER_IMPORT for object type(s) EVEN (Delete Mode)
/ | Errors occurred during post-handling RS_AFTER_IMPORT for EVEN L |
RS_AFTER_IMPORT belongs to package RS
/ | The errors affect the following components: |
/ | BW-WHM (Warehouse Management) |
/ | Post-import method RS_AFTER_IMPORT completed for EVEN L, date and time: 20110411140348 |
Start of subsequent processing ... 20110411140341
End of subsequent processing... 20110411140348
Start of................ 20110411140348
/ | End of.................. 20110411140348 |
Execution of programs after import (XPRA)
End date and time : 20110411140348
/ | Ended with return code: ===> 8 <===
Hi Deepak,
When you migrate DTPs from Dev to Prod , a new DTP ID are generated in Prod system and your DTP in the Process chain points to Dev's DTP and that is why you get this error
What i can think of is this scenario:
1. Original chain created and transported to Production. There due to some requirement the DTP would have changed(some body deletd the original one and created new one). Now the existing chain in production have the new DTP created there.
2. When u tried transporting the original chain from Dev it had the DTP created initially.
3. Since the DTP existing in Prod is having a different technical name than the one initially created in Dev so due to this this mismatch it might not get activated.
4. So better to create the DTP there itself and add it to the chain.
Regards
Raj
Similar Messages
-
Problems when transporting from DEV to PROD
Hi experts, I have problem during transport from DEV to Production.
We have a DEV, QAS and PRODUCTION and we have transport from DEV to QAS very well. But when we transport from DEV to PROD, recibe an error like:
After beginning the import method RS_IOBC_AFTER_IMPORT for Objects types IOBC mode (activation)
Failed to verify catalog InfoObjetos ZCM_UNIMET_CHA01
The InfoObjeto ZCM_RENC version does not exist in active
The InfoObjeto ZCM_RENM version does not exist in active
1.The Query is: Wy if the transport go OK from DE to QAS, then The transport from DEV to PROD terminated in error?.
2. There are any items to check in production before to transport?.
PD: All of the Objects in DEV are in ACTIVE status
Tanks,
Ramon SulvaranThe transport ended in QAS with error code (4) and ended in Producion with error code (8), the detal of the error in Production begin with:
Home After import RS_ODSO_AFTER_IMPORT method for type (s) ODSO object (trigger mode)
Activation of DataStore objects of type Object
Check DataStore objects of type Object
DataStore Object Verification ZCM_DS01
The DataStore object is consistent ZCM_DS01
Burning the DataStore objects of type Object
Internal activation (DataStore Object)
Pretreatment / Creating DDIC objects to DataStore Object ZCM_DS01
Table / View / BIC/AZCM_DS0100 (type 0) DataStore object recorded ZCM_DS01
Create / Delete the indexes for the active table
Table / View / BIC/AZCM_DS0140 (type 4) recorded ZCM_DS01 DataStore object
Type of table / BIC/WAZCM_DS0100 recorded
Table / View / BIC/VZCM_DS012 (type VIEW) recorded ZCM_DS01 DataStore object
Log ZCM_DS01 DataStore object changes was recorded successfully
Writing Object Catalog entries (Tadiran)
He has written the object TABL / BIC/AZCM_DS0100 in catálgo objects (Tadiran)
He has written the object TABL / BIC/AZCM_DS0140 in catálgo objects (Tadiran)
He has written the object TABL / BIC/VZCM_DS012 in catálgo objects (Tadiran)
He has written the object TTYP / BIC/WAZCM_DS0100 in catálgo objects (Tadiran)
Activate all ABAP Dictionary objects (5):
Error / Warning in progr.activación Dict., Detailed log> Detail
Activate table / BIC/AZCM_DS0100.
Lack of expansion to the category table
Lack of extension category for include or subtype .......
When i go to BW Production to check teh object. I see tha the Object was create but in inactive status (grey color). When y Try to Actiavate it y see the error: Error/ Warning in program Activation Dcit. Detailed Log -> Detail -
Reg: Error while transporting from Quality to Production
Hi ,
I am facing a problem while transporting ODS from quality to production.. The same works perfectly when i transport from Dev to quality.
The Error Displayed while transporting is
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type
The creation of the export DataSource failed
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object
The creation of the export DataSource failed
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when resetting DataStore Object to the active version
Kindly give me some suggestion ..
Thanks in advance
Regards
Gurugo to the source system RFC connection in SM59 and do a remote login - if you get the login page there then there is an issue with the RFC connection. also check if any other system is using the same RFC.. we had a situation where th R/3 connection was being used by 3 BI instances and everytime we reset the password , another system would lock the sme , ultimately we identified the systems and did a password reset in all the systems and then the issue got resolved.
but then we also faced the same issue you faced and it was related to login issues - check the remote login and that will tell you. -
Error in rules while updating from PSA to ODS
Hi Experts,
I am trying to load data from PSA to ODS using DTP. For about 101 records I get the following error:
"Runtime error while executing rule -> see long text RSTRAN 301"
On further looking at the long text:
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
Overflow converting from ''
The error was triggered at the following point in the program:
GP4808B5A4QZRB6KTPVU57SZ98Z 3542
System Response
Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
o Transformation ID
o Data record number of the source record
o Number and name of the rule which produced the error
Procedure for System Administration
When looking at the detail:
Error Location: Object Type TRFN
Error Location: Object Name 06BOK6W69BGQJR41BXXPE8EMPP00G6HF
Error Location: Operation Type DIRECT
Error Location: Operation Name
Error Location: Operation ID 00177 0000
Error Severity 100
Original Record: Segment 0001
Original Record: Number 2
Pls can anyone help in deducing and pointing this error to the exact spot in the transformation rule
Thanks & Regards,
RajHi Kazmi:
Runtime Errors CONNE_IMPORT_WRONG_COMP_TYPE
Exception CX_SY_IMPORT_MISMATCH_ERROR
Short text
Error when attempting to IMPORT object "HIST2".
What happened?
Error in the ABAP Application Program
The current ABAP program "RSORAT4M" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught in
procedure "AKT_DAY_HIST2" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When importing the object "HIST2", the component no. 8 in the
dataset has a different type from the corresponding component
of the target object in the program "RSORAT4M".
The data type is "I" in the dataset, but "P" in the program.
How to correct the error
Try to find out why the type of the object should be different.
There are various possible options:
1. The type of the imported field has changed in the Data Dictionary.
Make sure that the type of the imported field matches the type
of the field in the Data Dictionary.
If the data cannot be restored from another source, the data must be
read by the 'old' structure, converted und again eported with the new
structure, so that future IMPORTs will always function with the new
structure.
2. A new program version is active, which no longer fits the dataset.
Try to solve the error generating the program "RSORAT4M" again. This
works as follows: Select transaction SE38 in the SAP system. Enter
the program name "RSORAT4M". Then activate the function 'Generate'.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"CONNE_IMPORT_WRONG_COMP_TYPE" "CX_SY_IMPORT_MISMATCH_ERROR"
"RSORAT4M" or "RSORAT4M"
"AKT_DAY_HIST2"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught wit
"AKT_DAY_HIST2" "(FORM)", or its possible occurren
RAISING clause of the procedure.
Hope this helps.
Thanks to you and all
Raj -
Purchase Order going into Error in process while ordering from SRM.
Hello All,
We are facing a typical issue where the PO is going into error while ordering from SRM. The error message is ' 17.09.2010 12:45:35 Purchase order XXXXXXX: G/L account XXXXXX cannot be used (please correct ) '
Is there any mechanism/tcode where we can list out the Backend errors in SRM?
We are using SRM 4.00.
Thanks.
Rgds,
Arnabask your FI /CO consultant
since there are different types of GL accounts like expense , inventory .
so he can guide you well what GL account is correct
as well check product category vs gl account configuration. -
Error in @Override while chaning from JDK1.6 to JDk1.5
Hi,
I am getting following error while migrating from JDK1.6 to JDK1.5.
Multiple markers at this line
- implements org.quartz.Job.execute
- The method execute(JobExecutionContext) of type TransferFiles must override a superclass
method
I have a class which implements Job interface having one method execute(JobExecutionContext context) . I am overriding this method inside one of my class by using @Override annotataion.
It is working absolutely fine in JDK1.6 but while migrating to JDK1.5 it is showing the above error.
Kindly help me in this regard.
Thanks,
AKThank you very much for your kind help. I would like to tell you that by changing my enviroment to JDK1.5 from JDK1.6 it is asking for change the project facet. After changing the Project Facet from 6.0 to 5.0 I am getting error at @Override annotation line.
I am sharing my code here.
@Override
public void execute(JobExecutionContext arg0) throws JobExecutionException {
System.out.println("Quartz Scheduler: " + new Date());
errFileList.clear();
ArrayList<String> inputFileList = new ArrayList<String>();
try {
Authenticate.setUser();
inputFileList = getInputFileList(yesterdayDate());
int x = 0;
Iterator<String> inputIterator = inputFileList.iterator();
while (inputIterator.hasNext()) {
String inputFile = inputIterator.next();
StringTokenizer st = new StringTokenizer(inputFile, "&");
String output = null;
while (st.hasMoreTokens()) {
String view = (String) st.nextElement();
if (view.startsWith("view")) {
StringTokenizer st1 = new StringTokenizer(view, "=");
while (st1.hasMoreTokens()) {
output = (String) st1.nextElement();
x++;
String outputFile = OUTPUT_FILES + output + XML;
getAuthentication(Authenticate.getUserId(), Authenticate
.getPassword());
status = copyfile(inputFile, outputFile, x);
runTime();
runDate();
LOG.info("Error Files Are : " + getErrorFileList());
LOG.info("No of Error Files : " + errFileList.size());
if ((null != status) && (errFileList.size() > 0)) {
setSendMail(true);
EmailHandler
.dispatchEmail(toMailList(), Email.ERROR_FILES,
TransferFiles.getErrorFileList().toString(),
Email.FROM);
// readLogfile(
// "C:/Program Files/Apache Software Foundation/Tomcat 5.5/webapps/XmlFileTransformation/FileTransform.log"
} catch (Exception e) {
System.out.println("Exception" + e);
LOG.error("Exception" + e);
Here I have two suggestions coming by eclipse.
1.create execute method in super type ToolConstants
2.Remove @Override annotation.
but I have the same method inside an interface named as Job. So after removing the @Override annotation
I am getting the following runtime exception.
javax.servlet.ServletException: Servlet execution threw an exception
root cause
java.lang.NoClassDefFoundError: javax/activation/DataSource
fileTransform.FileTransServlet.doPost(FileTransServlet.java:52)
javax.servlet.http.HttpServlet.service(HttpServlet.java:647)
javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
Please help me.
Thanks,
Ak -
Error in DMS while accessing from portal
Hi Experts,
Iam getting the below error in portal while accessing the dms repository. the repository was fine status is in green color
but still getting the error while iam viewing it from content administration > kmcontent> my repository name
what should i do please help me in this
com.sap.netweaver.bc.rf.common.exception.IOOperationFailedException: Connection Failed: Connection setup failedConnection Failed: Nested Exception. Failed to get connection. Please contact your admin.
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMR3FunctionCalls.openConnection(DMSRMR3FunctionCalls.java:5934)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMR3FunctionCalls.getTopLevelFolders(DMSRMR3FunctionCalls.java:426)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMStructure.refreshChildren(DMSRMStructure.java:531)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMStructure.getChildren(DMSRMStructure.java:574)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMMutableNamespaceManager.findResources(DMSRMMutableNamespaceManager.java:930)
at com.sapportals.wcm.repository.CollectionImpl2.internalGetChildrenManager(CollectionImpl2.java:310)
at com.sapportals.wcm.repository.CollectionImpl.internalGetChildren(CollectionImpl.java:1616)
at com.sapportals.wcm.repository.CollectionImpl.doGetChildren(CollectionImpl.java:145)
at com.sapportals.wcm.repository.CollectionImpl.getChildren(CollectionImpl.java:125)
at com.sapportals.wcm.repository.CollectionImpl.getChildren(CollectionImpl.java:358)
at com.sapportals.wcm.service.resourcelistfilter.cm.ResourceListFilter.getChildren(ResourceListFilter.java:420)
at com.sapportals.wcm.rendering.collection.AbstractRendererStatus.initialfilter(AbstractRendererStatus.java:331)
at com.s...
Please help me in this .............
waiting for your responses.....
Thanks & Regards,
Shilpa.Dear
You will have to create one System for R/3 Server Access, Once you have created that you will have to maintain User mapping for System Access for each individual users, who want to access the DMS Documents from Portal.
Regards,
Tushar Dave -
"No service for system..." after transporting from dev to prod
Hi,
again i have a problem like some other guys also had. I already checked several postings concerning this issue!
We transported dev-objects to prod, also ID-object like Business Systems.
The sender side now changed their communication for sending IDoc's to our Prod-XI. While sending IDoc's form Prod R/3 they get "no service for system SAPPSI, client010.." etc.
I already checked:
1. idx1 port is SAPPSI pointing to right destination PSI
2. idx2 all necessary Metadata are loaded
3. checked adapter specific identifiers in ID and also reloaded them with no change!
4. in receiver IDoc CC i added RFC-Dest: PSI and Port is SAPPSI
5. did a cache refresh!
I need to let you know that we are using one SLD and already communicated with the sender-prod r/3 -system to SAP XI -DEV.
can someone please help us?! we have no clue what might be wrong!!
brWell i have some strange thoughts:
when the idoc is send in sender-system the values on sender informations are:
Port: SAPPSI
Partner number: PSICLNT010
Type: LS
The error we receive is:
no service for system SAPPSI, client 010 in Integration Directory
Shouldn't there be the Partner-Number like PSICLNT010?!
Can someone confirm and tell me if i am right?!
br -
Moving XI transports from QA to Prod server
Hello,
We are getting ready to send our XI transports from the QA server to the production server. We are currently using the file transfer method - we have not yet finished setting up the CMS server.
Now my question is this:
For the Integration Repository, am I supposed to send the same file created from our dev server to the production server, or do I create a new transport file from our QA box and send that file to production? Same question applies to the Integration Directory.
For example, the FileA.tpz gets created in the dev server, exported to the QA server. Developers are done testing in QA and want to move the objects to production. Should I export the same FileA.tpz to the production box OR generate a new transport file from the QA server (FileB.tpz) and send that to production box instead?
Thanks in advance.Joy,
Ideally you should move from Dev to QA and from QA to Prod. Then everything will be in sync. If you move directly from Dev to Prod and if there any changes then they will not be in QA. So this should not happen.
Because only after developement you will move to QA. Once when you test in QA then you will move to Production from QA.
Check this weblogs for further info:
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/marion.schlotte/blog/2006/03/30/best-practices-for-nwdi-track-design-for-ongoing-development
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
---Satish -
Transport from DEV to PROD BPC 7.5
Hi
i had a question of transporting AppSets from DEV to PROD System.
On the PROD Systems are no AppSets the PROD System is completly new.
Is it possible to transport the AppSets directly from the DEV to the PROD or must we first make a Backup in the DEV and an Restore in the PROD.
Thank you for your help.Hi Carsten,
As far as i understand you need to transport application sets individually, from development to production. The object type ASET and APPM refer to an application set and application respectively.
As mentioned above, you can check and confirm from SAP Support if the back up mode ia now available to users.
Hope this helps.
Regards,
Poonam -
Hi,
How can we know whether a particular transport request is transported from Quality to Production?If we check in SE09 in quality is that enough?
K.Kiran.You can check in SE09, either in DEV or QA.
in SE09, click on the request number, and select 'Transport Logs'. It should display the log of transports associated with that request. Check if the PRD log has entries for Import, Check versions, generation of programs etc.
Please keep in mind that just the 'Selection for Import' just not mean that the request is transported, it means that the request is still in the PRD transport queue.
Another way to check would be open the program in SE38, and use version management for remote comparision with PRD.
Hope this helps.
Sudha -
Error in routine(Inactive) while transporting from DEV to QA
Hi All,
I am currently working on moving the development from BI 7.0 Development to QA environment, while trying to move stuffs, i am facing an error stating that 2 of the routines are in INACTIVE Version, which stops me to move the objects to QA,
The error message looks like,
Object 'F0Q23H75A4P0BH0K98BKJBH48' (ROUT) of type 'Routine' is not available in version 'A
I can't able to find which routine is this, and how to find, which routine is inactive.
This stops my work to move other objects to QA. since, i am trying to move the process chain for masterdata along with its dependant objects to QA, The list is big, and so trying to move everything along with the process chain,
Can anyone, please help me out to find, what this routine stands for and how to find and make it ACTIVE, and move to QA,
I will assign points to everyone who responds,
Thanks in advance,
Regards
PoojaHi Shiva,
Its not able to find any entries for that specified ID, but anyways,, found why its getting failed, one of the infoobject had a empty routine, with no values, so,, took out that,, and activated and now it went through,
Anyways, thanks for your help Shiva,
I will assign points for it
THanks
Pooja -
ERROR FRM-40735 while migrating from 6i to 9i using FMA
Hi,
We have migrated a sample form which is in 6i to 9i using Oracle Forms Migration Assistant. It is compiling without errors and while running hitting the error
FRM-40735:PRE-FORM trigger raised unhandled exception ORA-06508.
and not opening up the form...Please post any suggestions on this.
madhu.Thank you very much for the help...I could resolve it by just adding the appropriate pll's in forms90 folder.
Now, we are trying to implement the calender in forms 9i. As we are moving from Forms 6i C/S to Forms 9i, as a first step I've implemented calender in web forms 6i (using demo's in oracle doc's--using CalenderWidget Bean)
I tried doing the same for Oracle 9i too but it didn't work..I mean it is deleting the code for the trigger
WHEN_CUSTOM_ITEM_EVENT which is written for Bean.
Please suggest me regarding how to proceed with this...
thank you
madhu. -
DBIF_RSQL_SQL_ERROR while doing a transport from DEV to PROD
Hi,
We are trying to transport some requests from our BW Development to BW Production. As we are importing the request we are facing the following two runtime errors in Dev.
1.
Database error text........: "ORA-01654: unable to extend index SAPSR3.TBTCO~1
by 128 in tablespace PSAPSR3"
Internal call code.........: "[RSQL/INSR/TBTCO ]"
2.
Database error text........: "ORA-01653: unable to extend table
SAPSR3.TMSALOGAR by 128 in tablespace PSAPSR3"
Internal call code.........: "[RSQL/INSR/TMSALOGAR ]"
Looking forward to your help on this error. Additionally please let me know if this has got anything to do with Production? Or as this is occuring in Development this is an development issue only?
Thanks,
Andy Kroos.Ask your basis guys to increase the table space...
check this thread...
[Error : DBIF_RSQL_SQL_ERROR;
--- Thanks... -
Error in adpatch while upgrading from 11.5.3 to 11.5.5
Error while applying adpatch for upgrading workflow from 2.5 to 2.6(patch number - 2032040, database driver)
ATTENTION: All workers either have failed or are waiting.
Restarting all failed workers... (restart # 1)
Fixed: file xmlparserv2.zip on worker 1 for product fnd username APPLSYS.
Restarted: file xmlparserv2.zip on worker 1 for product fnd username APPLSYS.
FAILED: file xmlparserv2.zip on worker 1 for product fnd username APPLSYS.
ATTENTION: All workers either have failed or are waiting:
FAILED: file xmlparserv2.zip on worker 1.
while upgrading as first step I installed java(1.3) and altered file jserv.properties.
I didnot reset path and classpath as it was not mentioned in their document
then i was to xmlparser,
HOW TO LOAD XML PARSER, XML SQL UTITLITY and XMLGEN PKG INTO THE 11i DATABASE
To load the XML parser:
10. loadjava -user apps/apps -r -v xmlparserv2.jar
while doing this step i got 108 errors.
then from metalink, i saw username/pwd should be sys/change_on_install
then I got just one error.
--------------------------- I got one error here
cannot resolve org/xml/sax/helpers/AttributeListImpl
I ignored and continued
after doing remaining steps, i did
load the XML SQL utility (XSU):
create the XMLGEN package body:
which went fine
after that while applying patch 2032040, I got file xmlparserv2.zip on worker 1.
I restarted the worker many times, but no success
Regards
DeepakPlease review the following notes:
Note: 400159.1 - Unable To Run Technology Stack Validation Report On Db Tier
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=400159.1
Note: 362042.1 - Technology Stack Validation Utility Error on the Database Tier: ERRORMSG: Invalid APPS database user credentials
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=362042.1
Maybe you are looking for
-
Pretty much as the title says, really need to get rid of this for checking up on account settings and whatnot. Any help would be appreciated thanks!
-
Through Programming how do we execte ff_5 after fpb7 tcodes?
Hi all, I am using BAI2 file format in ff_5 Tcode after that use a fpb7 for transfer data into payment lot and return lot. can any one tell me how do i call a second code fpb7 in ff_5 tcode so that it will run automatically. shall i use a bdc program
-
HELP ME PLEASE!
-
Why sever-side state saving doesn't support fail over?
Hi all, In my previous thread "ADF server-side state saving method" Frank said that it doesn't support fail over. Re: ADF server-side state saving method My customer is wondering the reason. If anyone has a clear statement about it, could you share i
-
Convert Microsoft Word, PowerPoint, and Excel files to PDF
This question was posted in response to the following article: http://help.adobe.com/en_US/acrobat/pro/using/WS40411658-73C0-4669-88E8-D410F5993FAC.html