Error in Personnel Information- Country/Structure do not match application

Hi Experts
I am on ECC 6.0 and on SP level SAPKE60027. Using ESS webdynpro applications for Saudi Arabia. While using Personnel Information Area and under this using any sub area like address, personnel data etc I am getting the following error:
*Critical Error*
*A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.*
*Please contact your system administrator.*
*Country/Structure do not match application country*
Plz help me in this regard to solve this issue.
Thanks
Sheetal Gupta

go to su3 and chk wht is ur MOL  key
it must be you country key

Similar Messages

  • Error in Personal addre/Family---Country/Structure do not match application

    Hi Experts
    I am on Ecc 6.0 and using ESS webdynpro applications for molga 28 and 42. While using Personnel address/ Family member, I am getting the following error:
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
    Country/Structure do not match application country
    I read all the threads relating to this issue but have no solutions,
    my user do have correct MOL and UGR setting in parameters and his personnel number has corresponding correct record in PA0003 IVWID field.
    Also, I read note 936179, but molga 28 and 42 doesn't apply for this note actually.
    Would you please give some hint? Thanks very much.
    Regards,
    Sophie Que
    Edited by: Sophie Que on Aug 3, 2010 11:18 AM

    This error is most likely caused when the role assigned to the user includes a service and resource definition which is either pointing to a country specific service that differs from the MOLGA assigned to the PERNR associated with this ESS user
    or has a missing defintion or link entirely
    For example - the user with Taiwan MOLGA 42 must be assigned a Portal role than ensures when they call
    generic service key EMPLOYEE_PERSINFO_ADDRESS - it will call taiwan resource
    EMPLOYEE_ADDRESS_TW_SERVICE05 - which is defined with the exact location of the Taiwanese address
    iview in the URL of PCD page resource definition
    Hope this helps
    A complete list of all HpF tables and their relationships is available from the following wiki
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/InitialStepsin+ESS
    Best wishes
    Stuart

  • Country/Structure do not match application country  error msg

    Hi all,
    When i execute the Personal Data/Address iView in 'My First Days' under LWEvents, i get the above-error msg on "Country structure do not match application country". i know that LW GP are only available for US. im trying this out in a sandbox system so randomly assigned my id an employee. my qns:
    1) How can i check which country structure is being referrred for my id/employee?
    2) the same iViews personal data/address etc, when accessed under "Personal Information" work fine. how is the country being resolved on those iViews?
    would really appreciate inputs on this.thnks!!

    Hi,
    Please let me know which country you are working and LWE is delivered only for USA only.
    Regards,
    Samba.

  • Country/Structure do not match application country

    Hi Gurus..
    We configured ESS and MSS in our portal system (EP 7.0) and backend system ERP 2005 (ECC6.0) .
    But we get an error at Address under Personal Information section which is  "Country/Structure do not match application country"
    We searched OSS and found out the message 936179 and we tried to implement in our backend system with this oss note directions for country group Turkey(47). There is no ESS service for Turkey, we are trying to custom reuse country .
    We also read customizing documentation (IMG -> Personnel Management -> Employee Self-service -> Service specific settings -> Own data -> Reuse country specific services). It tells about  V_T588IT_SCREEN view but we could not find out this view .
    And still get this error message.
    Any suggestions..
    We are looking forward to getting your answers.
    Best and Kindest regards,
    Gulhizar

    Hi,
    This looks like inconsistancy in the Backend HR-Tables, Please maintain the Feature ivwid and run the program RPUFixds with se38.
    I think your problem will be solved.
    Regards,
    Samba.

  • ESS Country/Structure do not match application country

    We have installed ESS SP08 on NW04s.
    When selecting the ESS/Personal Information/Addresses iview we receive the following error message:
    Country/Structure do not match application country (the Java Trace is listed at the bottom of the message)
    Other iviews such as ESS/Personal Information/Direct Deposit Information display information.  
    Updates fail with
    Data record 0028216900090      9999123120020701000 has grouping value "" instead of "DU01"
    The following R/3 Roles are assigned to the user
    SAP_EMPLOYEE_ERP05_US
    SAP_ESSUSER_ERP
    SAP_ESSUSER_ERP05
    The Portal Role assigned to the user is: -  Employee Self-Service
    It looks like some configuration is missing but we can't determine if it is in the portal, ESS or R/3.  Does anyone have any ideas on where the conflict resides?
    Ned Neeley
    Java Trace File
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Country/Structure do not match application country
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
         at com.sap.xss.per.helpers.MessageHelper.raiseException(MessageHelper.java:43)
         at com.sap.xss.hr.per.us.address.fc.FcPerAddressUS.readRecord(FcPerAddressUS.java:271)
         at com.sap.xss.hr.per.us.address.fc.wdp.InternalFcPerAddressUS.readRecord(InternalFcPerAddressUS.java:615)
         at com.sap.xss.hr.per.us.address.fc.FcPerAddressUSInterface.readRecord(FcPerAddressUSInterface.java:150)
         at com.sap.xss.hr.per.us.address.fc.wdp.InternalFcPerAddressUSInterface.readRecord(InternalFcPerAddressUSInterface.java:229)
         at com.sap.xss.hr.per.us.address.fc.wdp.InternalFcPerAddressUSInterface$External.readRecord(InternalFcPerAddressUSInterface.java:305)
         at com.sap.xss.hr.per.us.address.overview.VcPerAddressUSOverview.onBeforeOutput(VcPerAddressUSOverview.java:267)
         at com.sap.xss.hr.per.us.address.overview.wdp.InternalVcPerAddressUSOverview.onBeforeOutput(InternalVcPerAddressUSOverview.java:275)
         at com.sap.xss.hr.per.us.address.overview.VcPerAddressUSOverviewInterface.onBeforeOutput(VcPerAddressUSOverviewInterface.java:158)
         at com.sap.xss.hr.per.us.address.overview.wdp.InternalVcPerAddressUSOverviewInterface.onBeforeOutput(InternalVcPerAddressUSOverviewInterface.java:140)
         at com.sap.xss.hr.per.us.address.overview.wdp.InternalVcPerAddressUSOverviewInterface$External.onBeforeOutput(InternalVcPerAddressUSOverviewInterface.java:224)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:602)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:568)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:195)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:707)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:269)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:779)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:714)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:69)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1248)
         at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:353)
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:551)
         at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:595)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:826)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:730)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

    A coworker of Ned's here ...
    We are not reusing any country specific scenarios.  We only have the US.    I did take a look at note 936179, but we are not reusing any country specific services so I don't know if it applies.
    Is there somewhere that you specify a country for an employee for ESS?
    Thanks.
    Janelle

  • Country/Structure do not match application country(ESS)

    Hi,
    We are configuring Business Package for ESS 1.0. We have configured the HR for INDIA in the Backend (ECC 6.0).
    When I open address/personal data/family dependents in Life and Work Events, I am getting the following error. ( I have only Life and Work Events for US process)
    ' Country/Structure do not match application country. '
    How can I change the country?
    Thank you,
    Vamshi

    Hi Vamshi,
    You cannot copy the whole folder at one strike, as you might think. You have to copy each process and each callable object one by one.The copy button will get enabled only after you drill down till the process and not at the folder level.
    For ex: Life and work events(US)->Processes->My First days->My first days(process). Once you drill down till this, the copy button will get enabled.copy the process and paste in the newly created folder.You have to copy all the processes one by one.
    Actually it is bit time consuming.But there is no other way you can do it
    Regards,
    Sharadha

  • ESS Personal Id : Country/Structure do not match application country

    Hi,
    i am trying to display personal inforamtion services  in portal while i am  selecting personal id i am getting the below error.
    backend i used to 99 country and created infotype assigned to subarea ..please help me on this issue .
    thanks in a advance.
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Country/Structure do not match application country..

    You can check the following suggestions:
    Please have a look at table V_T7XSSPERSUBTYP and V_T588IT_SCREEN via sm31 and see if the country is configured in there!
    - V_T7XSSSERSRVCG
    - V_T588UICONVCLAS.
    run tcode SLG1 after error message occured .. what does it tell you ?
    - Also check if Incorrect Viekn is maintained for pernr. Check through se11 -> pa0003 -> viekn field for selected pernr .
    Run 'RPUFIXDS'  Please refer note 936179.
    Hope this help you,
    Regards

  • Country/structure do not match application country- Error Message

    Hi all,
    Does anyone have information about this error message? I tried to search for this. But I am unable to find any information. I am getting this error message in ESS with ECC 5.0,  when trying to get country specific infotype screens.
    The exact steps that I followed is as below:
    I am using the same user to access different country- specific infotypes. For ex using the same employee, but by changing the country grouping at the personal area assignment setting at the SPRO[Assign Personal Area to Company Code]. Here I change the country grouping for the company code, so that I am able to use the same employee over many countries.
    This works for many countries- except Switzerland in Address Infotype. Originally the employee belongs to US country grouping. When I change the country grouping to India it works fine(Address Infotype). However, when I change the grouping to Switzerland, I am getting the error message mentioned above. However, I am able to use the Bank Information infotype without any issues.
    Anyone have come across such an error message and can anyone suggest a better work around than the method that I am using right now.
    Thanks,
    Krish

    Hi Harald,
    I have the same error. After i cheked the tables you mentioned a new error occur:
    "   com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: DataNodeInfo(FcPersInfo.InitPernr.InitPernrOutput.Subtypes): structure field Default_Begda not found
    Any inputs are highly appraciated!
    Thx,
    Eugen

  • Country/Structure do not match application country   - on ESS page,any clue

    I am getting this error message from the ESS page.
    I had changed mapped my id / pernr to a new different country and reverted, but again getting this message.
    I used to map my id with any of the PERNR specific to a country for testing purposes.
    any clues ?

    When you are mapping your user id with different pernr (let say India) then in portal try with ess india sceanario. Incase mapping is changed to GB then you can run GB ess scenario.
    If you are following above mechanism and still gettig error then there may be two possible causes;
    a) Country for which you are trying to run ess scenario in portal is not delivered in ESS sandard delivery.
    In that case follow following;
    spro->personnel management->employee self service->service specific settings->own data->reuse country specific applications.
    Also go through SAP notes;
    Note 936179  Reuse of country specific Applications.                  
    Note 953852  Best Fits selection for re-using country specific service
    b) Incorrect Viekn is maintained for pernr. Check through se11 -> pa0003 -> viekn field for selected pernr .
    It should be same as molga. for e.g., 1 for german employee, 40 for indian employee and 10 for US employee.
    Regards
    Pooja

  • Error : Country/structure do not match aplication country

    Dear ALL,
    We are now on ESS 60.2 on EP6SP13, we are able to view the ESS on EP but not all iview.
    Who's who is working , Personal Information has got problem, As in R/3 the reis no service defined for Indian, Let us know how to go abt it
    1) We copied a service from some other country and use it .
    Error : Country/structure do not match aplication country
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException:Country/structure do not match aplication country
    2) If we don't assign any country it gives
    Error : no service exists  
    Reg
    Amith

    Similar kind error has been discussed in the following thread
    ESS Configuration Problem

  • Error- "Tax code B0 country IN does not exist in procedure TAXINN"

    Hi to All,
    I'm working on a Import PO. While doing MIRO for planned delivery cost, I'm getting an error "Tax code B0 country IN does not exist in procedure TAXINN"
    I've assigned the Tax code to company code, but still I'm not able to solve this problem. Could anybody tell me the areas in which I may have made the mistake?
    Thanks & Regards,
    Piyush

    Hi Piyush
    You assign your tax code to company code at IMG--> Logis General --> Tax on Goods Movemnt --> Basic Settings --> Calculation of excise duty -> Condition type excise determination --> Maintain Tax code to country code
    If still problem is not resolved you maintain the all rates to 0 in FTXP of this Tax code.
    Regard
    Vivek
    -- Reward if helpful !!

  • Error: Tax cod OI country IN does not exist in procedure TAXINN

    Hi all,
    while posting invoice, i am facing an error
    "Tax code OI country IN does not exist in procedure TAXINN"
    I defined the tax code OI and assigned it to my company code XXX. I created Tax procedure TAXINN with three basic condition types (BASB, MWAS, MVBS). I assigned my tax procedure to the country IN.
    I think i missed some thing in the configuration part. Please guide me.
    Thanks!
    Pavan

    Hi,
    1. If tax is deducable in nature means if you are using CIN then assigm Tax code
    SPRO --> logisctic General --> tax on goods movements --> india --> bacis setting --> determine of excise condition --> defaults excise conidtion
    here assign tax code with company code .
    2. If while doing miro you are getting Tax Code" VN" Instead of OI
    then please check condition in FV11 for material/plant/vendor combination, may be this tax code system is fetching from there or some other combination you are maintaining.
    You can use data base tables also for your Tax code if you know tax conditions used there
    T Code : SE16
    Table : A363
    A358 Country/Plant/Ctrl code/Material
    A357 Country/Plant/Ctrl code
    A362 Country/NBM-NCM Code
    A971 Tax Code
    A359 Plant/Matl group
    Hope Help u !
    Regards,
    Pardeep Malik

  • After entering the redemption code from Adobe Photoshop CC, I keep getting an error saying "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help."

    Hi. I'm a Mac user. After entering the redemption code from Adobe Photoshop CC, I keep getting an error saying "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help." What should I do?

    Did you purchase the software in another country than where you live?

  • ERROR: Component identity found in manifest does not match the identity of the component requested.

    I am getting below mentioned error?
    ERROR: Component identity found in manifest does not match the identity of the component requested. Reference is Microsoft.VC80.MFCLOC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0".
    Definition is Microsoft.VC80.MFCLOC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762".
    ERROR: Activation Context generation failed.
    End Activation Context Generation.
    How to solve this error?
    =================
    Begin Activation Context Generation.
    Input Parameter:
    Flags = 0
    ProcessorArchitecture = Wow32
    CultureFallBacks = en-US;en
    ManifestPath = C:\Program Files (x86)\Citrix\ICA Client\MFC80.DLL
    AssemblyDirectory = C:\Program Files (x86)\Citrix\ICA Client\
    Application Config File = 
    INFO: Parsing Manifest File C:\Program Files (x86)\Citrix\ICA Client\MFC80.DLL.
    INFO: Manifest Definition Identity is (null).
    INFO: Reference: Microsoft.VC80.MFCLOC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0"
    INFO: Resolving reference Microsoft.VC80.MFCLOC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0".
    INFO: Resolving reference for ProcessorArchitecture WOW64.
    INFO: Resolving reference for culture Neutral.
    INFO: Applying Binding Policy.
    INFO: No publisher policy found.
    INFO: No binding policy redirect found.
    INFO: Begin assembly probing.
    INFO: Did not find the assembly in WinSxS.
    INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.MFCLOC\8.0.50608.0__1fc8b3b9a1e18e3b\Microsoft.VC80.MFCLOC.DLL.
    INFO: Did not find manifest for culture Neutral.
    INFO: End assembly probing.
    INFO: Resolving reference for ProcessorArchitecture x86.
    INFO: Resolving reference for culture Neutral.
    INFO: Applying Binding Policy.
    INFO: No publisher policy found.
    INFO: No binding policy redirect found.
    INFO: Begin assembly probing.
    INFO: Did not find the assembly in WinSxS.
    INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.MFCLOC\8.0.50608.0__1fc8b3b9a1e18e3b\Microsoft.VC80.MFCLOC.DLL.
    INFO: Attempt to probe manifest at C:\Program Files (x86)\Citrix\ICA Client\Microsoft.VC80.MFCLOC.DLL.
    INFO: Attempt to probe manifest at C:\Program Files (x86)\Citrix\ICA Client\Microsoft.VC80.MFCLOC.MANIFEST.
    INFO: Manifest found at C:\Program Files (x86)\Citrix\ICA Client\Microsoft.VC80.MFCLOC.MANIFEST.
    INFO: End assembly probing.
    INFO: Resolving reference Microsoft.VC80.MFCLOC.mui,language="*",processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0".
    INFO: Resolving reference for ProcessorArchitecture WOW64.
    INFO: Resolving reference for culture en-US.
    INFO: Applying Binding Policy.
    INFO: No publisher policy found.
    INFO: No binding policy redirect found.
    INFO: Begin assembly probing.
    INFO: Did not find the assembly in WinSxS.
    INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.MFCLOC.mui\8.0.50608.0_en-US_1fc8b3b9a1e18e3b\Microsoft.VC80.MFCLOC.mui.DLL.
    INFO: Did not find manifest for culture en-US.
    INFO: End assembly probing.
    INFO: Resolving reference for culture en.
    INFO: Applying Binding Policy.
    INFO: No publisher policy found.
    INFO: No binding policy redirect found.
    INFO: Begin assembly probing.
    INFO: Did not find the assembly in WinSxS.
    INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.MFCLOC.mui\8.0.50608.0_en_1fc8b3b9a1e18e3b\Microsoft.VC80.MFCLOC.mui.DLL.
    INFO: Did not find manifest for culture en.
    INFO: End assembly probing.
    INFO: Resolving reference for ProcessorArchitecture x86.
    INFO: Resolving reference for culture en-US.
    INFO: Applying Binding Policy.
    INFO: No publisher policy found.
    INFO: No binding policy redirect found.
    INFO: Begin assembly probing.
    INFO: Did not find the assembly in WinSxS.
    INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.MFCLOC.mui\8.0.50608.0_en-US_1fc8b3b9a1e18e3b\Microsoft.VC80.MFCLOC.mui.DLL.
    INFO: Did not find manifest for culture en-US.
    INFO: End assembly probing.
    INFO: Resolving reference for culture en.
    INFO: Applying Binding Policy.
    INFO: No publisher policy found.
    INFO: No binding policy redirect found.
    INFO: Begin assembly probing.
    INFO: Did not find the assembly in WinSxS.
    INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.MFCLOC.mui\8.0.50608.0_en_1fc8b3b9a1e18e3b\Microsoft.VC80.MFCLOC.mui.DLL.
    INFO: Did not find manifest for culture en.
    INFO: End assembly probing.
    INFO: Parsing Manifest File C:\Program Files (x86)\Citrix\ICA Client\Microsoft.VC80.MFCLOC.MANIFEST.
    INFO: Manifest Definition Identity is Microsoft.VC80.MFCLOC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762".
    ERROR: Component identity found in manifest does not match the identity of the component requested. Reference is Microsoft.VC80.MFCLOC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0".
    Definition is Microsoft.VC80.MFCLOC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762".
    ERROR: Activation Context generation failed.
    End Activation Context Generation.

    Hello Xyzam,
    Welcome to MSDN forum.
    Based on your description, I am afraid that your issue is out of support range of VS General Question forum which mainly discusses
    the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
    Whether did this issue occur when you do something in Visual Studio? Which version of Visual Studio are you using? If you got this issue when you worked with a project, please tell us the type of your project, is it MFC project?
    When you running this MFC project?
    If you created  new and simple project, whether you get this issue?
    Please provide us detailed information, then we will provide you better support.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • When I try to activate my prepaid CC card I get: "This card was purchased in a country that does not match your Adobe ID." I bought it in the USA for use here in the UK...how can I activate it? It is a student edition. Thanks

    When I try to activate my prepaid CC card I get: "This card was purchased in a country that does not match your Adobe ID." I bought it in the USA for use here in the UK...how can I activate it? It is a student edition. Thanks

    I don't know that you can purchase in one country and use it in another.  Try contactoing Adobe support thru chat:
    Creative Cloud support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

Maybe you are looking for

  • Calendar alerts have no sound in Mountain Lion.

    When I create apointments in Calendar in Mountain Lion and put (Message with sound) and choose my sound for the allert. When it pops up as a notification it does not make any sound. My notification for the Calendar app is set to (Alerts) not (Banners

  • Pro*C bug: "make -f proc.mk sample1" failed

    Oracle db in SunOS-Unix system V release4.0; C compiler using gcc. Since "cc" doesn't run on my unix station, I only modifed two lines in proc.mk, let "CC=gcc", and "RCC=gcc -I. -O -xcg92". For command "make -f proc.mk sample1", the output as follows

  • Camera on Standby - Memory Full - Problem Solved o...

    It's not THE PHONE MEMORY OR EVEN THE MEMORY CARD CAPACITY IT'S ALL ABOUT THE IMAGE DESTINATION FOLDER HAVING TOO MANY FILES OR TOO MANY MBs! Thanks to some guy mentioning that this might be rooted in Nokia's formatting of the MicroSD card I was lead

  • Newbie to Mac Needs Help Please - Very Frustrated

    Hello. I'm new to Mac. I'm pretty well versed in Windows and pretty technically savvy so this is frustrating. I cannot get my MacBook with OS X 10.4.8 to print on my new HP 1020. Both are new. It never even occurred to me that the Mac wouldn't be abl

  • FCE4 - does it have scene detection for HDV?

    This is an important feature for me and its not easy to find! Thanks