Error in Phase EXPORT of CU&UC Migration 46C to ECC60: ORA-00942
Hi,
We are making a 46C to ECC 6.0 upgrade EHP4 Stack 8.
We have migrated to the system ECC6.0 not Unicode. Now we're in the
process of Export to Unicode and we got the following errors:
(EXP) ERROR: failed DbSlExeRead rc = 103, table "/ BI0/PTCTUSERNM"
(SQL error 942) error message returned by DbSl: ORA-00942: table or
view does not exist
(DB) INFO: disconnected from DB
(EXP) ERROR: failed DbSlExeRead rc = 103, table "DFKKCOLFILE_P_W (SQL
error 942) error message returned by DbSl: ORA-00942: table or view
does not exist
(DB) INFO: disconnected from DB
We found that the 2 tables do not exist in previous 46C release but
exist in other systems with ECC6.0 release.
We found that, at least, DFKKCOLFILE_P_W table did not exist in our
system migrated not unicode.
We have reviewed the OSS Note 1156968 (Add. info. EHP on upgrading to 4
for ERP SAP ABAP 6.0) and we did not find a solution to our errors.
Is there a process or mechanism to put these tables in the system if
the migration process has not created them? or is it possible to ignore
these errors in the export and go on with the migration and fix the
tables when we are done with the migration? If we ignore these errors
will we encounter problems because of that?
Can you help us?
Thank you in advance.
Hello, we have solved the problem.
To help someone with the same error, what we have done is:
1.- wait until all the processes has finished and the export is stopped.
2.- startup SAP
3.- SE14 and look up the tables. Crete the tables in the database.
4.- stop SAP
5.- Retry the export (if you did all the steps with sapinst running but the dialogue window in the screen) or begin the sapinst again with the option: "continue with the old options".
Regards to all.
Similar Messages
-
ORA-00942 Error during unicode export of BI 7.0
Hello Everyone,
I am doing an export of a non-unicode BI 7.0 system to convert and import it into a Unicode database. All the jobs have passed except one and I see the following error in the log file (SAPAPPL0_3.log)
/usr/sap/ABD/SYS/exe/run/R3load: START OF LOG: 20080302124247
/usr/sap/ABD/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
/usr/sap/ABD/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Jun 9 2007 09:20:06
/usr/sap/ABD/SYS/exe/run/R3load -e SAPAPPL0_3.cmd -datacodepage 4102 -l SAPAPPL0_3.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) WARN: UMGCONTAINER has 1 problems.
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1100
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: active, by default
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG = 500
(GSI) INFO: dbname = "ABD20070922100908
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "ussbbdd5 "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "ussbbdd5"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(GSI) INFO: instno = "INITIAL "
(EXP) ERROR: DbSlExeRead failed
rc = 103, table "/BIC/SZTERR_CD"
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(DB) INFO: disconnected from DB
/usr/sap/ABD/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/ABD/SYS/exe/run/R3load: END OF LOG: 20080302124251
When I run the following command on /BIC/SZTERR_CD, I do not get any table information back. I am not sure how to fix it though.
SELECT * FROM DBA_OBJECTS WHERE OBJECT_NAME = '/BIC/SZTERR_CD ';
I did finish all the unicode preconversion steps and also ran the SMIGR_CREATE_DDL program. I had exported recently from the same system but I never got this error during that run.
Another question is about the order in which the steps need to be performed. I completed the preconversion steps, then ran the SMIGR_CREATE_DDL program before proceeding to the export phase. Is this right or does it not matter?
Thanks again for your help!Hello Stacy,
> When I run the following command on /BIC/SZTERR_CD, I do not get any table information back. I am not sure how to fix it though.
> SELECT * FROM DBA_OBJECTS WHERE OBJECT_NAME = '/BIC/SZTERR_CD ';
If the object does not exists on the source target database, please check if the ddic of sap still contains the table definition. (SE11 or SE14)
If yes you can set the status of the table /BIC/SZTERR_CD to "ok" in the corresponding task file.
You can not fix this problem in other way after you have started the conversion, because of the export files are already generated (with the information of the sap ddic)...
> I completed the preconversion steps, then ran the SMIGR_CREATE_DDL program before proceeding to the export phase. Is this right or does it not matter?
That was the right way.
Regards
Stefan -
Error in generating exports for EP system for system copy
Dear gurus
We have EP SR1 on 32 bits and we need to change our EP to latest. But to do so we were planning to generate exports of the current system and put it on the latest one. While doind so we are getting the error in "export from java database" phase. The error is mentioned below
Could anyone please suggest how can we fix this
ERROR 2010-01-21 11:35:45 CJS-30049 Execution of JLoad tool 'C:\j2sdk1.4.2_12\bin\java.exe -classpath C:\usr\sap\DEN\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload
den/sapmnt/DEN/SYS/global/security/lib/tools/iaik_jce.jar;
den/sapmnt/DEN/SYS/global/security/lib/tools/iaik_jsse.jar;
den/sapmnt/DEN/SYS/global/security/lib/tools/iaik_smime.jar;
den/sapmnt/DEN/SYS/global/security/lib/tools/iaik_ssl.jar;
den/sapmnt/DEN/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/DEN/SYS/global/sltools/sharedlib/jload.jar;C:/usr/sap/DEN/SYS/global/sltools/sharedlib/antlr.jar;C:/usr/sap/DEN/SYS/global/sltools/sharedlib/exception.jar;C:/usr/sap/DEN/SYS/global/sltools/sharedlib/jddi.jar;C:/usr/sap/DEN/SYS/global/sltools/sharedlib/logging.jar;C:/usr/sap/DEN/SYS/global/sltools/sharedlib/offlineconfiguration.jar;C:/usr/sap/DEN/SYS/global/sltools/sharedlib/opensqlsta.jar;C:/usr/sap/DEN/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;C:/usr/sap/DEN/SYS/exe/uc/NTI386/mssjdbc/base.jar;C:/usr/sap/DEN/SYS/exe/uc/NTI386/mssjdbc/util.jar;C:/usr/sap/DEN/SYS/exe/uc/NTI386/mssjdbc/sqlserver.jar;C:/usr/sap/DEN/SYS/exe/uc/NTI386/mssjdbc/spy.jar -sec DEN,jdbc/pool/DEN,
den/sapmnt/DEN/SYS/global/security/data/SecStore.properties,
den/sapmnt/DEN/SYS/global/security/data/SecStore.key -dataDir C:/DEN_EXPORT/JAVA/JDMP -exclude "D@C:\Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS-JAVA/EXP/negativTableListForJload.txt" -remove_trailing_blanks "C:\Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS-JAVA/EXP/removeTrailingBlanks.txt" -convert_empty_LOBs "C:\Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS-JAVA/EXP/convertEmptyLobs.txt" -convert_empty_strings "C:\Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS-JAVA/EXP/convertEmptyStrings.txt" -convert_empty_binary "C:\Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS-JAVA/EXP/convertEmptyBinary.txt"' aborts with return code 1.
SOLUTION: Check 'jload.log' and 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS-JAVA/EXP/jload.java.log' for more information.
Thanks and Regards
MohammedHi,
I am doing system copy of BI7.0 (Abap+Java) stack, I am getting error in "export from java database" phase as mentioned below.
When i tried to run the query mentioned in SAP Note 1120872: ,
SQL> DELETE FROM BC_DDDBTABLERT WHERE NAME = 'CAF_GP_R3USRMPGCFG';
DELETE FROM BC_DDDBTABLERT WHERE NAME = 'CAF_GP_R3USRMPGCFG'
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> DELETE FROM BC_DDDBTABLERT WHERE NAME = 'CAF_GP_IF_CONTEXT';
DELETE FROM BC_DDDBTABLERT WHERE NAME = 'CAF_GP_IF_CONTEXT'
ERROR at line 1:
ORA-00942: table or view does not exist
Kindly help me on this.
Regards,
Sampath.
SAP INST error log:
ERROR 2010-10-15 10:32:35
CJS-30049 Execution of JLoad tool '/usr/java/j2sdk1.4.2_12/bin/java -classpath /usr/sap/BD1/SYS/global/sltools/sharedlib/launcher.jar -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload /usr/sap/BD1/SYS/global/security/lib/tools/iaik_jce.jar:/usr/sap/BD1/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/sap/BD1/SYS/global/security/lib/tools/iaik_smime.jar:/usr/sap/BD1/SYS/global/security/lib/tools/iaik_ssl.jar:/usr/sap/BD1/SYS/global/security/lib/tools/w3c_http.jar:/usr/sap/BD1/SYS/global/sltools/sharedlib/jload.jar:/usr/sap/BD1/SYS/global/sltools/sharedlib/antlr.jar:/usr/sap/BD1/SYS/global/sltools/sharedlib/exception.jar:/usr/sap/BD1/SYS/global/sltools/sharedlib/jddi.jar:/usr/sap/BD1/SYS/global/sltools/sharedlib/logging.jar:/usr/sap/BD1/SYS/global/sltools/sharedlib/offlineconfiguration.jar:/usr/sap/BD1/SYS/global/sltools/sharedlib/opensqlsta.jar:/usr/sap/BD1/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar:/oracle/client/10x_32/instantclient/ojdbc14.jar -sec BD1,jdbc/pool/BD1,/usr/sap/BD1/SYS/global/security/data/SecStore.properties,/usr/sap/BD1/SYS/global/security/data/SecStore.key -dataDir /oracle/expocopy/JAVA/JDMP -remove_trailing_blanks /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/removeTrailingBlanks.txt -convert_empty_LOBs /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/convertEmptyLobs.txt -convert_empty_strings /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/convertEmptyStrings.txt -convert_empty_binary /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/convertEmptyBinary.txt' aborts with return code 1.<br>SOLUTION: Check 'jload.log' and '/tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/jload.java.log' for more information.
Log details for jload.java.log:
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Oct 15, 2010 10:32:33 AM com.sap.inst.jload.Jload main
INFO: Jload -sec BD1,jdbc/pool/BD1,/usr/sap/BD1/SYS/global/security/data/SecStore.properties,/usr/sap/BD1/SYS/global/security/data/SecStore.key -dataDir /oracle/expocopy/JAVA/JDMP -remove_trailing_blanks /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/removeTrailingBlanks.txt -convert_empty_LOBs /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/convertEmptyLobs.txt -convert_empty_strings /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/convertEmptyStrings.txt -convert_empty_binary /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/convertEmptyBinary.txt
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.db.DBConnection connectViaSecureStore
INFO: connected to BD1 on jdbc/pool/BD1
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.db.ExcludedObjects addObjects
INFO: excluded objects (type TB): [EP_ATTR_HEADERS, EP_ATTR_VALUES, J2EE_CONFIGENTRY]
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.db.ExcludedObjects addObjects
INFO: excluded objects (type EL): [EP_ATTR_HEADERS, KMC_DBRM_CONTENT, EP_ATTR_VALUES, J2EE_CONFIGENTRY]
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.db.ExcludedObjects addObjects
INFO: excluded objects (type ES): [EP_ATTR_HEADERS, KMC_DBRM_CONTENT, BC_SCVERSION, J2EE_CONFIGENTRY]
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.db.ExcludedObjects addObjects
INFO: excluded objects (type EB): [KMC_DBRM_CONTENT, J2EE_CONFIGENTRY]
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.JobStatus readStatus
INFO: trying to read status file /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/EXPORT.sta
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.JobStatus readStatus
INFO: commencing restart
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.Jload dbExport
SEVERE: DB Error during export of CAF_GP_IF_CONTEXT
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.Jload printSQLException
SEVERE: Message: ORA-00942: table or view does not exist
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.Jload printSQLException
SEVERE: SQLState: 42000
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.Jload printSQLException
SEVERE: ErrorCode: 942
Oct 15, 2010 10:32:35 AM com.sap.inst.jload.db.DBConnection disconnect
INFO: disconnected -
Error in Pre- Export methods for a request
Hi All,
I am getting an error while releasing a request, its giving
"Error in Pre- Export methods for a request DM0k.....". Could you please tell me why and how can I rectify that?
Thanks.
NAPlease go through as per the link
[SAP Transport Request |http://www.sap-basis-abap.com/sapbs008.htm]
thanks
G. Lakshmipathi -
Error in phase XPRAS_AIMMRG for Upgrade from 4.7 to ERP6 ehp5 sps5
Hi All,
We are in process in upgrading our sandbox system from 4.7 to ERP6.0
EHP5 SPS5.
During the downtime step we are facing an error in phase XPRAS_AIMMRG
Upon investigation we found that there are short dumps in the system
due to this error.
Below is the extract of the short dumps generated by the job RDDEXECL
Category Internal Kernel Error
Runtime Errors DDIC_TYPE_INCONSISTENCY
Application Component BC-ABA-LA
Date and Time 05.12.2011 08:58:48
Short text
Inconsistency in the dictionary for the structure "KOMG".
What happened?
Error in the SAP kernel.
The current ABAP "SAPLF82V" program had to be terminated because
the
ABAP processor detected an internal system error.
Also, We I try to check the Table KOMG in SE11 is get the below messages.
Check table KOMG (DDIC/05.12.11/10:00)
Append structure OILKOMG appended to table KOMG
Append structure OIUKOMG appended to table KOMG
No customer or SAP include SI_KOMK_CM exists
No customer or SAP include SI_KOMP_CM exists
No customer or SAP include CI_PRS_CPILS_2 exists
Enhancement category 3 possible, but include or subty. not
yet classified
Field LGORT in table KOMG is specified twice. Please check
KOMG-ZZMVGR4: Table TVM1T in search help attachment differs
from table of search field
Check on table KOMG resulted in errors
Has anyone received the below message in XPRAS phase during the upggrade.
Any suggestion would be most welcome.
Regards,
Nilesh JagtapDear Nilesh,
The reason for this issue is that the component 'LGORT' is indeed specified twice in structure KOMG on your system.
It might be definied in the standard include as well as in your customer include.
Please bear in mind, that if you append customer own structures to SAP standad structures, that the component names should start with 'Z' or even better 'ZZ'.
That prevents the case which might have happened here, that the field you have added on customer side has also been delivered as part of an SAP standard include.
So you should change your structure accordingly.
Note 531835 describes how to add an own field to such structures. It might also be helpful for you.
After you have repaired your structure you can activate the structure KOMG and the issue should be solved.
Best Regards,
Abhishek -
Error in phase: ADD_TO_BUFFER in SPAM during import of SAPKB70017 and 18
Hello
What is problem in this case? During import of SAPKB70017 and SAPKB70018 I get following error(there is no SLOG file in /usr/sap/trans/log):
The import was stopped, since an error occurred during the phase
ADD_TO_BUFFER, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: ADD_TO_BUFFER
- Reason for error:
- Return code: 0211
- Error message:
Notes on phase ADD_TO_BUFFER
In this phase the queue is placed in the transport buffer of your
system. This phases can terminate due to the following reasons:
o TP_INTERFACE_FAILURE: The tp interface could not be called. There is
an RFC error.
o CANNOT_ADD_PATCH_TO_BUFFER: A Support Package could not be included
in the transport buffer. The program tp is trying to open a file in
the file system. For more information, refer to the SLOG log file in
the directory /usr/sap/trans/log.
A prerequisite of the Support Package Manager is that the Change and
Transport System (CTS) is configured correctly. For more detailed
information, read the online documentation available from Help -> SAP
Library -> mySAP Technology Components -> SAP Web Application Server ->
Change and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.Hi Jan,
First, check whether your STMS is configured properly. Next check the transport directory and the transport tool from within STMS (system -> check in menu options).
If these 2 are ok, then you might check from within the OS layer by manually adding to buffer (tp add to buffer <Request No> <SID>).
Also, I am assuming you are doing this from client 000 with a non-standard user having proper authorizations.
I believe this to be an issue of permissions at the OS layer.
Regards
Siva -
Error in PHASE ACT_UPG: Upgrade SAP R/3 4.7 to SAP ECC 6.0 EHP
Hello,
I'm facing an error in phase MAIN_SHDRUN/ACT_UPG (see errors below).
After searching for the errors I found postings with advice to change R3trans and tp to the newest version. Strangely system did not take the newest kernelpatch I stored in upgrade folder. So I changed the files in the /usr/sap/SID/abap/exe folder and repeated the phase.
But the error is still there.
A solution was to reset the queue, but this is only possible with help by sap.
Error in phase: DDIC_ACTIVATION
So I'm waiting for their reaction since two days, but nothing happens.
My questions are now:
what happens if I use the option "initialize phase ACT_UPG to restart it from beginning"? Will the new R3trans be used? Have we got to to the SPDD again?
What happens if I use the option "accept non severe errors and repeat phase ACT_UPG? Are these language errors "non-severe"?
Errors:
In error log ACTUPG.ELG I find logs like:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60016INERECRUIT.REX
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "8"
In error log SAPup.ECO I find:
EXECUTING /usr/sap/REX/upg/abap/exe/tp (/usr/sap/REX/upg/abap/exe/tp) pf=/usr/sap/REX/upg/abap/bin/ACTUPG.TPP put REX
This is /usr/sap/REX/upg/abap/exe/tp version 376.01.14 (release 701)
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Looking for effective putsteps ... ... ready (looking for putsteps)
tp finished with return code: 8
meaning:
A tool used by tp produced errors
Process with ID 13163 terminated with status 8
In the last touched SP-File SAPAAAA701.SID I can find errors like:
"1EEDO545 "LANG" "DTEL" "*": Object information could not be imported"
Regards,
JuliaAfter pushing the message at SAP I got the following answer:
It is the problem from note 1417505. There is no guarantee that all objects where imported with the used R3trans. A rerun of phase will be unsuccessfully because error came up in DDIC_IMPORT.
A reset of the queue is only possible if SPAM/SAINT is used for importing support packages. In case of upgrade, like here, the upgrade has got to be resetted as described in upgrade guide.
After start between phase extraction and configuration the newest R3trans has got to be copied manually in /abap/exe folder.
Regards,
Julia -
Hello all,
Using SUM while running SCM 7.0 EHP3 upgrade I am getting error in phase MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC:
Checks after phase MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC were negative!
Last error code set: Single errors (code > 8) found in logfile 'MVNTFDC.ELG'<br/> 1 tp processes returned errors. View latest 'TP*.ECO' files in log-directory for details
ERROR: Detected the following errors:
# D:\SUM\abap\log\PD000203.SCD:
3 ETP000 NOT NULL )
3 ETP000 ON [/BIC/FZT_DEL_C1_PSCH000]
3 ETP000 WITH ( DATA_COMPRESSION = PAGE )
3 ETP000
2WETP000 11:10:14: Retcode 1: error in DDL statement for "/1CRR/TG00003781 " - repeat
2EETP345 11:10:26: Retcode 1: SQL-error "2726-Partition function '/BIC/FZT_DEL_C1_PFUN000' uses 1 c
2EETP345 olumns which does not match with the number of partition columns used to partition the tab
2EETP345 le or index." in DDL statement for "/1CRR/TG00003781 "
2 ETP000 --------------- DB-ROLLBACK() ---------------
2EETP334 11:10:26: error in DDL, nametab for "/1CRR/TG00003781" not activated
3 ETP000 NOT NULL )
3 ETP000 ON [/BIC/FZT_DEL_C2_PSCH000]
3 ETP000 WITH ( DATA_COMPRESSION = PAGE )
...skipped 18 more lines. Please see MVNTFDC.html for more information.
I checked some other log files:
MVNTFDC
1 ETQ201 Entering upgrade-phase "MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC" ("20150203110951")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00' Client = '000'
1 ETQ206 Executing pre-phase DB specific actions.
1 ETQ200 Executing actual phase 'MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'TP_MOVENTABS_SHD'
2 ETQ399 Arg[1] = 'INTDEL;INTACT;NOBUFFRESET;SHADOW_ONLY'
2 ETQ399 Arg[2] = 'MF=F,STEP=T,RANGE-TS'
2 ETQ399 Arg[3] = 'MVNTFDC.TP0'
1 ETQ399 Using error summary log 'MVNTFDC.ELG'.
1 ETQ399 Using 8 parallel processes
2 ETQ399 Empty putsteps - configuring at least parallel batches and main import processes.
2 ETQ399 Distribute 8 parallel processes to 2 tp and 4 R3trans.
4 ETQ380 computing toolpath for request "TP_MOVENTABS_SHD"
4 ETQ381 request "TP_MOVENTABS_SHD" means "tp mvntabs for shadow tables"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_SHD"
4 ETQ399 Requirement for tp maps to 'exe'
4 ETQ383 translates to path "D:\SUM\abap\exe"
2 ETQ399 Starting 8 tp processes:
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 7444 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP00.ECO'.
2 ETQ399 Started tp ddlntabs with pid 7444
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 4888 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=01" "seltsize=1" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP01.ECO'.
2 ETQ399 Started tp ddlntabs with pid 4888
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 9100 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=02" "seltsize=2" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP02.ECO'.
2 ETQ399 Started tp ddlntabs with pid 9100
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 736 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=03" "seltsize=3" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP03.ECO'.
2 ETQ399 Started tp ddlntabs with pid 736
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 8864 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=04" "seltsize=4" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP04.ECO'.
2 ETQ399 Started tp ddlntabs with pid 8864
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 9264 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=05" "seltsize=5" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP05.ECO'.
2 ETQ399 Started tp ddlntabs with pid 9264
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 9732 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=06" "seltsize=6" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP06.ECO'.
2 ETQ399 Started tp ddlntabs with pid 9732
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 11492 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=07" "seltsize=7" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP07.ECO'.
2 ETQ399 Started tp ddlntabs with pid 11492
3 ETQ123 20150203110954: PID 9264 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110954: PID 7444 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110954: PID 4888 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110954: PID 736 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110954: PID 9732 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110956: PID 11492 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110956: PID 9100 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110956: PID 8864 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
2 ETQ399 Looking for pattern 'PD00....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD000203.SCD'.
1 ETQ124 Scanned file 'log\PD000203.SCD' from offset 9525 to 12695 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD00....\.SCD'
2 ETQ399 Looking for pattern 'PD01....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD010203.SCD'.
1 ETQ124 Scanned file 'log\PD010203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD01....\.SCD'
2 ETQ399 Looking for pattern 'PD02....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD020203.SCD'.
1 ETQ124 Scanned file 'log\PD020203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD02....\.SCD'
2 ETQ399 Looking for pattern 'PD03....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD030203.SCD'.
1 ETQ124 Scanned file 'log\PD030203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD03....\.SCD'
2 ETQ399 Looking for pattern 'PD04....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD040203.SCD'.
1 ETQ124 Scanned file 'log\PD040203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD04....\.SCD'
2 ETQ399 Looking for pattern 'PD05....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD050203.SCD'.
1 ETQ124 Scanned file 'log\PD050203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD05....\.SCD'
2 ETQ399 Looking for pattern 'PD06....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD060203.SCD'.
1 ETQ124 Scanned file 'log\PD060203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD06....\.SCD'
2 ETQ399 Looking for pattern 'PD07....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD070203.SCD'.
1 ETQ124 Scanned file 'log\PD070203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD07....\.SCD'
2 ETQ399 Starting 1 tp processes:
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203111013: PID 8692 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP00.ECO'.
2 ETQ399 Started tp ddlntabs with pid 8692
3 ETQ123 20150203111050: PID 8692 exited with status 8 (time 0.000 real)
2EETQ399 tp ddlntabs failed with exit code 8.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD00....\.SCD'
1 ETQ124 Scanned file 'log\PD000203.SCD' from offset 12805 to 18826 for errors.
4 ETQ399 html file conversion from 'D:\SUM\abap\log\MVNTFDC.ELG' to 'MVNTFDC.html' succeeded.
4 ETQ010 Date & Time: 20150203111051
1EETQ399 Last error code set is: Single errors (code > 8) found in logfile 'MVNTFDC.ELG'
1 tp processes returned errors. View latest 'TP*.ECO' files in log-directory for details
1EETQ203 Upgrade phase "PARMVNT_FDC" aborted with errors ("20150203111051")
TP00.ECO
SAPup> Starting subprocess in phase 'TP_ACTION_CP2SINI' at 20150202112054
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\CP2SHDI.TPP" r3e SAPKBBF740 -s SCD u18
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
This is D:\SUM\abap\exe\R3trans.exe version 6.24 (release 741 - 11.08.14 - 17:21:00).
unicode enabled version
D:\SUM\abap\exe\R3trans.exe finished (0004).
INFO: No client specified on command line. Taking client 0 from E070C.
tp finished with return code: 4
meaning:
A tool used by tp produced warnings
SAPup> Process with PID 7592 terminated with status 4 at 20150202112055!
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150202213004
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 0
meaning:
Everything OK
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150202213118
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 8
meaning:
A tool used by tp produced errors
SAPup> Process with PID 5336 terminated with status 8 at 20150202213638!
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203102328
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 0
meaning:
Everything OK
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203102350
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 8
meaning:
A tool used by tp produced errors
SAPup> Process with PID 10396 terminated with status 8 at 20150203102427!
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203110952
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 0
meaning:
Everything OK
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203111013
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 8
meaning:
A tool used by tp produced errors
SAPup> Process with PID 8692 terminated with status 8 at 20150203111050!
Can someone please help ?Hi Pankaj,
did you get any solution for this issue ? I am also facing the same error in my BW upgrade to EHP3.
Please share the solution if you get any.
Regards, -
Error in phase XPRA_EXECUTION while updating the SAP_BASIS patch !4
Hi ,
I am trying to update the sap_basis patch from level 13 to 14 . While updating I am getting
Error in phase: XPRA_EXECUTION
Reason for error: TP_STEP_FAILURE
Return code: 0012
Error message: OCS Package SAPKB70014, tp step R, return code
0012
In ST22 It says Syntax error in program "CL_CLS_ATTR_VALUE_ASSIGNMENT==CP
any help would be appreciated..
Regards,
PradeepThis is what I get in the import log
The Syntax Error is given below
Execution of programs after import (XPRA)
Transport request : SAPKB70014
System : DEV
tp path : tp
Version and release: 372.04.59 700
Program terminated (job: RDDEXECL, no.: 17163300)
See job log
Execution of programs after import (XPRA)
End date and time : 20090518171648
Ended with return code: ===> 12 <===
untime Errors SYNTAX_ERROR
Date and Time 18.05.2009 17:16:34
Short text
Syntax error in program "CL_CLS_ATTR_VALUE_ASSIGNMENT==CP ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLCLS_AFTER_IMPORT" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_CLS_ATTR_VALUE_ASSIGNMENT==CP " in include
"CL_CLS_ATTR_VALUE_ASSIGNMENT==CM00D " in
line 1:
"Method "GET_DETAILS_OF_ASSIGNMENT" does not exist. The following simil"
"arly-named methods do exist: "GET_DESCRIPTION_OF_ASSIGNMENT", "GET_PAC"
"KAGES_OF_ASSIGNMENTS" and "GET_CLIENT_ASSIGNMENTS"."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLCLS_AFTER_IMPORT" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "CL_CLS_ATTR_VALUE_ASSIGNMENT==CP
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program
CL_CLS_ATTR_VALUE_ASSIGNMENT==CP :
"Method "GET_DETAILS_OF_ASSIGNMENT" does not exist. The following simil"
"arly-named methods do exist: "GET_DESCRIPTION_OF_ASSIGNMENT", "GET_PAC"
"KAGES_OF_ASSIGNMENTS" and "GET_CLIENT_ASSIGNMENTS"."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error. -
ORA-00942 error when exporting db
Hi,
Has anyone encountered the following error before? Kindly help.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
About to export the entire database ...
. exporting tablespace definitions
. exporting profiles
. exporting user definitions
. exporting roles
. exporting resource costs
. exporting rollback segment definitions
. exporting database links
. exporting sequence numbers
. exporting directory aliases
. exporting context namespaces
. exporting foreign function library names
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
My exp parameters are full=y grants=y indexes=y rows=yHi,
I have executed catexp.sql but when I run the exp it produced the ff error:
Connected to: Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
About to export the entire database ...
. exporting tablespace definitions
. exporting profiles
. exporting user definitions
. exporting roles
. exporting resource costs
. exporting rollback segment definitions
. exporting database links
. exporting sequence numbers
. exporting directory aliases
. exporting context namespaces
. exporting foreign function library names
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions
. exporting system procedural objects and actions
. exporting pre-schema procedural objects and actions
EXP-00008: ORACLE error 21779 encountered
ORA-21779: duration not active
ORA-06512: at "SYS.DBMS_AW", line 106
ORA-06512: at "SYS.DBMS_AW", line 222
ORA-06512: at "SYS.DBMS_AW_EXP", line 264
ORA-06512: at line 1
EXP-00083: The previous problem occurred when calling SYS.DBMS_AW_EXP.schema_info_exp
. exporting cluster definitions
EXP-00056: ORACLE error 31600 encountered
ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function SET_TRANSFORM_PARAM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
ORA-06512: at "SYS.DBMS_METADATA", line 836
ORA-06512: at line 1
EXP-00056: ORACLE error 31600 encountered
ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function SET_TRANSFORM_PARAM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
ORA-06512: at "SYS.DBMS_METADATA", line 836
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully -
Error in pre-export methods for request
hi...
while releasing the TR we are facing this error msg..." Error in pre-export methods for request" it is showing lock in fornt of the TR.neither be able to delete the TR ....
do reply as soon as possible..Hi,
I had the same error PU238.
What I did was:
Execute SE03 to unlock the object.
Then execute the program 'RS_STREE_OBJECTS_TO_REQ_GET', not sure what it does.
Afterwards, it worked perfectly.
Hope that information helps you.
Regards, -
Error Detected by export DLL for pdf
Post Author: netonomous
CA Forum: Exporting
We have a Win 2000 box with this feature working with no problem.
I am getting an error exporting to .PDF when using .NET 2 Business Objects. Quite the opposite of your situation. Any ideas? My temp folder is under C:\Windows\Temp and the error I receive is
Error in File C:\WINDOWS\TEMP\TSRDetail {F7EAB0D7-408F-4787-A1FE-5086F7199CB9}.rpt: Error detected by export DLL: This is on a Win 2003 box Service Pack 1 with IIS 6.0 with ASP.NET Framework for Crystal using an Oracle Database. Excel exports work ok.
Thanks much in advance.Post Author: netonomous
CA Forum: Exporting
We have a Win 2000 box with this feature working with no problem.
I am getting an error exporting to .PDF when using .NET 2 Business Objects. Quite the opposite of your situation. Any ideas? My temp folder is under C:\Windows\Temp and the error I receive is
Error in File C:\WINDOWS\TEMP\TSRDetail {F7EAB0D7-408F-4787-A1FE-5086F7199CB9}.rpt: Error detected by export DLL: This is on a Win 2003 box Service Pack 1 with IIS 6.0 with ASP.NET Framework for Crystal using an Oracle Database. Excel exports work ok.
Thanks much in advance. -
Releasing transport request has an error during the 'export' step.
Hello Everyone,
My environment is ERP 6.0 EHP6, AIX 6.3, Oracle 11g.
We have a transport request that was created in our development system by deleting some obsolete roles. When we try to release the transport request to our q/a system it terminates with errors in the export step.
The errors are.
End of export R3TRTABUUSR10
no E071K or E071K_STR entries found for R3TRTABUUSR11
Start export R3TRTABUUSR12 ...
no E071K or E071K_STR entries found for R3TRTABUUSR13
Of course we cannot create a new transport request because the roles were deleted.
Can someone please explain to me what could have cause this type of error and possibly how to resolve it?
Regards,
RonHi Ron,
As per your log, no E071K or E071K_STR entries found forR3TRTABUUSR11
no E071K or E071K_STR entries found for R3TRTABUUSR1
Looks like there is no entry found for E071K or E071K_STR in table USR11 and USR13.
Please check those table and make sure the above entries are there, if not that could be the issues.
Also, please check if these tables (USR10, USR11, USR12 USR13) are active in SE14.
Thanks
Adil -
I got error when I export database ORACLE 9i from solaris 9.
I want to export full database ORACLE 9i from SOLARIS 9 to import full database on ORACLE 9i on windows.
I set oracle environment and NSL_LANG with command:
bash-3.00$ export ORACLE_SID=TIS
bash-3.00$ export NLS_LANG=AMERICAN_AMERICA.TH8TISASCII
and then run command to export:
bash-3.00$ exp system/manager@TIS full=y file= /u03/dmp/TISfull.dmp log=/u03/dmp/exp_TIS.log
I got error message as:
Export: Release 9.2.0.1.0 - Production on Thu Oct 8 17:57:32 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Export done in TH8TISASCII character set and UTF8 NCHAR character set
About to export the entire database ...
. exporting tablespace definitions
. exporting profiles
. exporting user definitions
. exporting roles
. exporting resource costs
. exporting rollback segment definitions
. exporting database links
. exporting sequence numbers
. exporting directory aliases
. exporting context namespaces
. exporting foreign function library names
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions
. exporting system procedural objects and actions
. exporting pre-schema procedural objects and actions
EXP-00008: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
ORA-06512: at "SYS.DBMS_AW", line 42
ORA-06512: at "SYS.DBMS_AW", line 105
ORA-06512: at "SYS.DBMS_AW", line 221
ORA-06512: at "SYS.DBMS_AW_EXP", line 264
ORA-06512: at line 1
EXP-00083: The previous problem occurred when calling SYS.DBMS_AW_EXP.schema_info_exp
. exporting cluster definitions
EXP-00056: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
ORA-06512: at "SYS.DBMS_LOB", line 424
ORA-06512: at "SYS.DBMS_METADATA", line 1140
ORA-06512: at line 1
EXP-00056: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
ORA-06512: at "SYS.DBMS_LOB", line 424
ORA-06512: at "SYS.DBMS_METADATA", line 1140
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully
How can I solve this problem?
Any suggestion?#### HOW to solve it.
## To check the default temporary tablespace of the database:
SQL> select property_name, property_value from database_properties;
## check DEFAULT_TEMP_TABLESPACE, if it use wrong temporary tablespace, run:
SQL> alter database default temporary tablespace temp;
## check user with temporary tablespace, run command:
SQL> select username, temporary_tablespace, account_status from dba_users;
## change temporary tablespace:
SQL> create temporary tablespace temp1 tempfile '/data/u01/app/oracle/oradata/TIS/temp_b.dbf' size 100m;
SQL> alter database default temporary tablespace temp1;
SQL> drop tablespace temp including contents and datafiles;
SQL> create temporary tablespace temp tempfile '/data/u01/app/oracle/oradata/TIS/temp01.dbf' size 100m autoextend off extent management local uniform size 1m;
SQL> alter database default temporary tablespace temp;
SQL> drop tablespace temp1 including contents and datafiles;
Thanks -
SAINT Error in Phase CHECK_REQUIREMENTS
Hi.Experts,
In a new SAP component installation with "t-cd:SAINT", an error occurred.
ERROR MESSAGE
=============================================
Phase CHECK_REQUIREMENTS: Explanation of Errors
Open conversion requests still exist in the ABAP Dictionary for the
following ABAP Dictionary objects. To avoid inconsistencies and loss of
data, you must process these conversions first.
Proceed as follows:
- Open a new session.
- Start the Database Utility (transaction SE14).
- Correct the inconsistencies for the specified objects.
- Repeat the import phase. If no more inconsistencies are found, the
import continues.
=============================================
I have already checked 4 things of below
1.SE14-->BSEG
I can see the message below on the screen.
Request:"Adjust" Error in step2 -see object log and analysis
2.SPAU
The contents related to BSEG are already modified (Green)
3.SPDD
The contents related to BSEG are already modified (Green)
4.SE10
There is no modifiable request related BSEG.
Could someone tell me about how to deal this error?
Best Regards,
NaomiHi Naomi
Could you check this SAP Note about your issue
1839881 - SPAM/SAINT error during CHECK_REQUIREMENTS regarding open conversion request still existing
BR
SS
Maybe you are looking for
-
Alright, i am gonna be as brief and clear as i can be with this one: We have a file on a windoze server (the file is accessible and shared through windoze) that i need all of us to get to and modify. This has been done on the windoze pc's now i want
-
In iMovie 10 how do I insert a time line reference. In the attached photo I downloaded a movie file in which the time line shows up. On the 2nd photo which is my clip the time line does not show up. Thanks.
-
What is excatly the fastpath of function codes in pf-status
Hi friends, I would like to know what is excatly the fastpath of function codes in pf-status. I thought at first that I can choose a letter and in my program press Alt+letter and the function code will be executed but it did not work for me. Please h
-
Handling states within selfmade components
Hey folks, I have got a tiny problem. I have made a program that contains saveral states, two of them are "Login" and "Board". In the Login state I refer to the "compLogin" Component. There, the user has to login and afterwords the program has to swi
-
Can't delete movies from iPad 2
I have an iPad 2 and I cannot delete movies from it. I have tried going into the movie icon but there is no edit function. Also, synced it to itunes but the movies on the ipad that I want to delete are not in my itunes library. I went to Settings