Error in PHASE PREP_EXTRACT/PREIMP: Upgrade SAP R/3 4.7 to SAP ECC 6.0 EHP4
Hello,
I'm currently in upgrading a SAP R/3 4.7 system to a SAP ECC 6.0 EHP4.
Therefore I followed the Upgrade Guide from marketplace - installation- and upgrade guides - SAP ERP - SAP ERP 6.0 - SAP Enhancement Package 4 for SAP ERP 6.0 - Upgrade Guide SAP ERP including EHP4 SR1 - Unix on MaxDB.
I downloaded media from marketplace/swdc - Installations and Upgrades - SAP Application Components - SAP ERP - SAP ERP ENHANCE PACKAGE - EHP4 FOR SAP ERP 6.0 / NW7.01 - Upgrade.
I'm starting upgrade with upgrade master DVD 51036889_1 and 51036889_2.
Now upgrade breaks down in phase PREP_EXTRACT/PREIMP with error:
Severe error(s) occured in phase PREP_EXTRACT/PREIMP!
Last error code set: Single errors (code <= 8) found in logfile 'PREIMP.ELG'
PREIMP.ELG says:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
R3trans preimport and RETURN CODE in R710VPE.REX
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/REX/SYS/exe/run') or dbms_type ('ADA')"
Kernel is stored in /usr/sap/REX/SYS/exe/run and database is ADA (maxdb).
File R710VPE.REX says:
4 EPU201XBEGIN OF SECTION BEING ANALYZED
4 ETW000 R3trans version 6.13 (release 640 - 17.02.10 - 13:07:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 07.03.2011 - 15:28:36
4 ETW000 control file: /usr/sap/REX/upg/abap/tmp/PREIMPTRANS.CTL
4 ETW000 > import
4 ETW000 > file='/usr/sap/REX/upg/abap/bin/R710VPE.SAP'
4 ETW000 > safeandslow=yes
4 ETW000 > buffersync =yes
4 ETW000 > commit =1048576
4 ETW000 > importtruncated =yes
4 ETW000 R3trans was called as follows: R3trans -w /usr/sap/REX/upg/abap/tmp/R710VPE.REX -u 1 /usr/sap/REX/upg/abap/tmp/PREIMPTRANS.CTL
4 ETW000 active unconditional modes: 1
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/REX/SYS/exe/run') or dbms_type ('ADA')"
4 EPU202XEND OF SECTION BEING ANALYZED
Can anybody help me out here?
Regards,
Julia
Hello,
I run 'R3trans -x' command, but there was no problem - connection to database was working.
Problem was following:
Before starting the sdt service on host, I set environment variables JAVA_HOME and LD_LIBRARY_PATH for sidadm. That's not neccessary and that was the problem. Without setting these variables it is working now.
Thanks,
Julia
Similar Messages
-
Error in phase XPRAS_AIMMRG for Upgrade from 4.7 to ERP6 ehp5 sps5
Hi All,
We are in process in upgrading our sandbox system from 4.7 to ERP6.0
EHP5 SPS5.
During the downtime step we are facing an error in phase XPRAS_AIMMRG
Upon investigation we found that there are short dumps in the system
due to this error.
Below is the extract of the short dumps generated by the job RDDEXECL
Category Internal Kernel Error
Runtime Errors DDIC_TYPE_INCONSISTENCY
Application Component BC-ABA-LA
Date and Time 05.12.2011 08:58:48
Short text
Inconsistency in the dictionary for the structure "KOMG".
What happened?
Error in the SAP kernel.
The current ABAP "SAPLF82V" program had to be terminated because
the
ABAP processor detected an internal system error.
Also, We I try to check the Table KOMG in SE11 is get the below messages.
Check table KOMG (DDIC/05.12.11/10:00)
Append structure OILKOMG appended to table KOMG
Append structure OIUKOMG appended to table KOMG
No customer or SAP include SI_KOMK_CM exists
No customer or SAP include SI_KOMP_CM exists
No customer or SAP include CI_PRS_CPILS_2 exists
Enhancement category 3 possible, but include or subty. not
yet classified
Field LGORT in table KOMG is specified twice. Please check
KOMG-ZZMVGR4: Table TVM1T in search help attachment differs
from table of search field
Check on table KOMG resulted in errors
Has anyone received the below message in XPRAS phase during the upggrade.
Any suggestion would be most welcome.
Regards,
Nilesh JagtapDear Nilesh,
The reason for this issue is that the component 'LGORT' is indeed specified twice in structure KOMG on your system.
It might be definied in the standard include as well as in your customer include.
Please bear in mind, that if you append customer own structures to SAP standad structures, that the component names should start with 'Z' or even better 'ZZ'.
That prevents the case which might have happened here, that the field you have added on customer side has also been delivered as part of an SAP standard include.
So you should change your structure accordingly.
Note 531835 describes how to add an own field to such structures. It might also be helpful for you.
After you have repaired your structure you can activate the structure KOMG and the issue should be solved.
Best Regards,
Abhishek -
Error in phase MAIN_SHADOW/START_SHDI_FIRST (Upgrade EHP)
Hello to all,
(This plataform is an IBM DB2 for i5/OS)
I´m performing a Enhancement Package upgrade in our sap system from EHP3 to EHP5, but I´m stuck in phase MAIN_SHADOW/START_SHDI_FIRST (STARTS THE SHADOW SYSTEM). This error show the following message:
severe error(s) occured in phase MAIN_SHADOW/START_SHDI_FIRST!
Last error code set: Shadow instance couldn´t be started, check 'STARTSFI.LOG' and 'DEVTRACE.LOG'
So, I will post here that log files.
STARTFI.LOG:
1 ETQ200 Executing actual phase 'MAIN_SHADOW/START_SHDI_FIRST'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'DEVTRACE.LOG'
4 ETQ399 Set environment for shadow connect:
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWITCH"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="DEV", Nr="01", GwHost="SAPDEV", GwService="sapgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="DEV", Nr="01", GwHost="SAPDEV", GwService="sapgw01"
2 ETQ231 RFC Login failed
2 ETQ399 Stopping shadow instance
4 ETQ359 RFC Login to: System="DEV", Nr="01", GwHost="SAPDEV", GwService="sapgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="DEV", Nr="01", GwHost="SAPDEV", GwService="sapgw01"
2 ETQ231 RFC Login failed
2 ETQ353 Starting system
3 ETQ399 Executing command: 'startsap SID(DEV) INSTANCE(01) PROFILE('/usr/sap/DEV/EHPI/abap/DEV/SYS/profile/START_DVEBMGS01_SAPDEV') TYPE(*SHD)'.
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DEV", Nr="01", GwHost="SAPDEV", GwService="sapgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-1"
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
DEVTRACE.LOG:
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 700000060000000, size: 6379664)
DpShMCreate: allocated sys_adm at 700000060000010
DpShMCreate: allocated wp_adm_list at 700000060002ff0
DpShMCreate: allocated wp_adm at 7000000600031e0
DpShMCreate: allocated tm_adm_list at 7000000600104b0
DpShMCreate: allocated tm_adm at 700000060010500
DpShMCreate: allocated appc_ca_adm at 700000060562e20
DpShMCreate: allocated comm_adm at 700000060572830
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 7000000606011d0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 700000060601280
DpShMCreate: allocated j2ee_adm at 7000000606012c0
DpShMCreate: allocated ca_info at 700000060602240
DpCommAttachTable: attached comm table (header=700000060572830/ft=700000060572840)
MtxInit: -2 0 0
DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
Mon Sep 5 22:48:58 2011
GwISigint: received SIGINT (2), start shutdown phase
***LOG S30=> GwStopGateway, gateway stopped () [gwxxrd.c 12995]
Can you help me please, how to solve this error?
Best regards,
João Dimas - Portugal... continuation...
The dev_w0:
M Mon Sep 5 22:48:48 2011
M ThInit: running on host SAPDEV
M calling db_connect ...
B Loading DB library '/usr/sap/DEV/EHPI/abap/exe/dbdb4slib.o' ...
B Library '/usr/sap/DEV/EHPI/abap/exe/dbdb4slib.o' loaded
B Version of '/usr/sap/DEV/EHPI/abap/exe/dbdb4slib.o' is "720.00", patchlevel (0.98)
C DB4 SQL Reparse Activated
C *** ERROR => dbs/db4/schema contains wrong schema name SAPR3.
[dbsldb4.cpp 7094]
C Error is ignored. Schema R3DEVDATA is used.
C IBM i 7.1 - XDN Default
C XDN-Port: Assuming 9600 + sapmsDEV mod 100 = 9600
C as4IsHostLocal: SAPDBHOST 'SAPDEV' is local
C R3INLPGM: RmtExeLib from /usr/sap/DEV/EHPI/abap/exe/DBSLDB4RMT
C R3INLPGM: RmtExeLib is SAPDEVUPG
C DBSLENCWT: rc=0, msg=CPF9897 CONCURRENT WRITE IS ENABLED.
C QXDARECVR PTF Level is: SI37200
C
C Mon Sep 5 22:48:49 2011
C DbSl/DB codepage check: OK - (Unicode).
C Checking journal settings for QSQJRN /R3DEVDATA : OK
C === Central DB connect successfull! ===
C === Connection settings ===
C connected = TRUE
C con_hdl = 0
C db_handle = 1
C dbhost = SAPDEV
C dbhostport = 9600
C rdbname =
C dblib = R3DEVSHD
C r3sysle_changed = TRUE
C query_compl_reval = O
C dbconnecttype = L
C user = DEV01
C qaqqinilib = Default (QUSRSYS)
C dbjobname = WP00
C dbjobuser = DEV01
C dbjobno = 012091
C rmtexelib = SAPDEVUPG
C parallel_alter_tables = *OFF
C ===========================
C Query options file QUSRSYS/QAQQINI not found.
C -----------------------------------------------------------------------------
C ----- DbSl EGO Structure
C -----------------------------------------------------------------------------
C SAPSYSTEMNAME = DEV
C Character encoding = UNICODE
C process class = dialog process
C workprocess id = 0
C local host = SAPDEV
C dbhost = SAPDEV
C dbhostport = 9600
C rdbname =
C dbname = DEVSAPDEV
C dblib = R3DEVSHD
C application server = DVEBMGS01
C driver = DBSLDirectDrive
C Connect type = LOCAL
C pid = 9088
C wpjobname = WP00
C wpjobuser = DEV01
C wpjobno = 012091
C DB2/400 vers. appl. server = PASE 7.1
C DB2/400 vers. DB server = V7R1
C da_cache_size = 100
C dbsl_buffersize = 131072
C reopen = ON
C timeout_retry = 3
C alter_table_timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
M Mon Sep 5 22:48:54 2011
M SecAudit(rsauinit): Start init of Security Audit Log for first wp.
M in_ThErrHandle: 1
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M ThIErrHandle: entering ThSetStatError
M ThShutDownServer: shutdown server
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 9088) [dpuxtool.c 327] -
Error in phase START_SHDI_FIRST during upgrade to ECC6
Hi Expert,
When I upgrade from R3 46C to ECC6NU on Windows server 2003 64bits with SQL SERVER 2005 64bits, in phase START_SHDI_FIRST, it is failed.
Here is the log:
trc file: "dev_w21", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Apr 08 17:18:28 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno 01
M sid BXT
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 80
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 2516
M
M kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc21 2516) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 20608 (896)
M DpShMCreate: sizeof(tm_adm) 4663200 (23200)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1496)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010610050, size: 5329360)
M DpShMCreate: allocated sys_adm at 0000000010610050
M DpShMCreate: allocated wp_adm at 0000000010611AB0
M DpShMCreate: allocated tm_adm_list at 0000000010616B30
M DpShMCreate: allocated tm_adm at 0000000010616B90
M DpShMCreate: allocated wp_ca_adm at 0000000010A89330
M DpShMCreate: allocated appc_ca_adm at 0000000010A8D980
M DpShMCreate: allocated comm_adm at 0000000010A8F0F0
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0000000010B15D70
M DpShMCreate: allocated gw_adm at 0000000010B15DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0000000010B15E20
M DpShMCreate: allocated wall_adm at 0000000010B15E30
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Tue Apr 08 17:18:29 2008
M ThInit: running on host shsapsrv05
M calling db_connect ...
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C Thread ID:404
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 72
C patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on SHSAPSRV05
C CopyLocalParameters: dbuser is 'dbo_shd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.3042.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Cache sizes: header 88 bytes, 20000 names (28000000 bytes), 500 dynamic statements (2752000 bytes), total 30752088 bytes
C Using shared procedure name cache SHSAPSRV05_BXT_BXT_SHD_MEM initialized by another process.
C Connected to db server : [SHSAPSRV05] server_used : [np:(local)], dbname: BXT, dbuser: dbo
C pn_id:SHSAPSRV05_BXT_BXT_SHD
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080408 171829 SHSAPSRV05
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Tue Apr 08 17:18:32 2008
I MtxInit: 21 0 0
M SHM_PRES_BUF (addr: 0000000017540050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFF3410050, size: 59801600)
M SHM_PAGING_AREA (addr: 0000000017980050, size: 32112640)
M SHM_ROLL_ADM (addr: 0000000019830050, size: 598700)
M SHM_PAGING_ADM (addr: 00000000198D0050, size: 525344)
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 0000000019960050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7440 bytes (50 server) at 00000000199B0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 21, WP_CNT = 23, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 000000001E830160, size: 30000000, end: 00000000204CC4E0)
B dbtbxbuf: Buffer TABLP (addr: 00000000204D0160, size: 10240000, end: 0000000020E94160)
B dbexpbuf: Buffer EIBUF (addr: 0000000020EB0170, size: 4194304, end: 00000000212B0170)
B dbexpbuf: Buffer ESM (addr: 00000000212C0170, size: 4194304, end: 00000000216C0170)
B dbexpbuf: Buffer CUA (addr: 00000000216D0170, size: 3072000, end: 00000000219BE170)
B dbexpbuf: Buffer OTR (addr: 00000000219C0170, size: 4194304, end: 0000000021DC0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000012DFAFB0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0000000029DA00C0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0000000029DA06E0
S using messages for server info
S size of spec char cache entry: 165024 bytes (timeout 100 sec)
S size of open spool request entry: 1184 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 5744kb, dir_size: 5656kb.
A Attached to PXA (address 000007FFF6D20050, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF4FE7E000 leng=20955136 end=000007FF5127A000)
A >> Shm MMADM area (addr=000007FF5024A2E0 leng=261120 end=000007FF50289EE0)
A >> Shm MMDAT area (addr=000007FF5028A000 leng=16711680 end=000007FF5127A000)
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 23982 bytes at 0000000029EC0050
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\put\BXT\DVEBMGS01\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\put\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITSP ICMAN is not active: Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
A *** ERROR => TEXTENV_INVALID environment: [ablocale.c 205]
A *** ERROR => Locale=`unsupported' Lang=`E' [ablocale.c 211]
A *** ERROR => Country=`0AU' CodePage=`6200'. [ablocale.c 217]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 13168]
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A
A Tue Apr 08 17:18:33 2008
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Tue Apr 08 17:18:33 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code TEXTENV_INVALID.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function DoSetTextEnv Line 225.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_SAPDEXT
A Error when generating text environment..
A
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 13168]
S *** ERROR => sap_dext: Spoolworkprocess aborted! [rspodynp.c 113]
S T100-key: SY , type '65'
S variable 0: Error when generating text environment.
S Exitcode 4
S *** ERROR => restarting work process (spool will not work after sap_dext [rspodynp.c 135]
M ***LOG R63=> ThWpHalt, halt wp () [thxxhead.c 15883]
M in_ThErrHandle: 1
M *** ERROR => ThWpHalt: halt wp (step 4, th_errno 5, action 2, level 1) [thxxhead.c 10169]
M
M Info for wp 21
M
M stat = 4
M reqtype = 5
M act_reqtype = 5
M rq_info = 8576
M tid = 21
M mode = 0
M len = 2040
M rq_id = 14
M rq_source = 1
M last_tid = 21
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M Modeinfo for User T21/M0
M
M tm state = 2
M uid = 22
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M ext_session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M imode = 0
M mode state = 0x42
M mode clean_state = 1
M task_type = ZTTASPO
M lastThFc = THFCSPO
M lastAction = TH_IACT_NO_ACTION
M th_errno = 5
M rollout_reason = 0
M last_rollout_level = 0
M async_receives = 0
M cpic_receive = 0
M em handle = 0
M roll state = 2
M abap state = 2
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 000007FF51285070
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M async_receives = 0
M vm = no VM
M
M Adresse Offset Data from input buffer
M -
M 0000000010EE2C00 000000 00000000 02000000 4a000000 00000000 |........J.......|
M 0000000010EE2C10 000016 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C20 000032 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C30 000048 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C40 000064 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C50 000080 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C60 000096 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C70 000112 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C80 000128 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C90 000144 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CA0 000160 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CB0 000176 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CC0 000192 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CD0 000208 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CE0 000224 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CF0 000240 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D00 000256 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D10 000272 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D20 000288 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D30 000304 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D40 000320 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D50 000336 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D60 000352 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D70 000368 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D80 000384 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D90 000400 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DA0 000416 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DB0 000432 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DC0 000448 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DD0 000464 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DE0 000480 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DF0 000496 00000000 00000000 00000000 00000000 |................|
M -
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M Entering ThSetStatError
M ThIErrHandle: incomplete previous roll out, do a full roll out
M ThRollOut: roll out T21/U22/M0/I0 (level=7, short_roll_out=0)
M ThRollOut: call rrol_out (1)
M ThRollOut: act roll state = DP_ROLLED_OUT
M ThRollOut: roll level <> 0, don't call ab_rollout
M ThRollOut: full roll out of U22 M0 I0 (Level 7) ok
C SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was not set. rc: 1
M ThIErrHandle: don't try rollback again
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=1)
M ThIErrHandle: Entering ThReplyToMsg
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (5)
M ThErrHdlUser: save context
M ThEmContextDetach2: detach T21/M0 from em memory (em_hdl=0, force=0)
M ThEmContextDetach2: reset local em info
M call ThrShutDown ...
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 021 000 R/3 000000000 INACTIVE NO YES NO 000 255 255 20080408 171829 SHSAPSRV05
B Disconnected from connection 0
B statistics db_con_commit (com_total=6, com_tx=1)
B statistics db_con_rollback (roll_total=2, roll_tx=1)
M ***LOG Q02=> wp_halt, WPStop (Workproc21 2516) [dpnttool.c 327]
trc file: "dev_w21", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Apr 08 17:19:07 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno 01
M sid BXT
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 80
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 832
M
M kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc21 832) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 20608 (896)
M DpShMCreate: sizeof(tm_adm) 4663200 (23200)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1496)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010610050, size: 5329360)
M DpShMCreate: allocated sys_adm at 0000000010610050
M DpShMCreate: allocated wp_adm at 0000000010611AB0
M DpShMCreate: allocated tm_adm_list at 0000000010616B30
M DpShMCreate: allocated tm_adm at 0000000010616B90
M DpShMCreate: allocated wp_ca_adm at 0000000010A89330
M DpShMCreate: allocated appc_ca_adm at 0000000010A8D980
M DpShMCreate: allocated comm_adm at 0000000010A8F0F0
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0000000010B15D70
M DpShMCreate: allocated gw_adm at 0000000010B15DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0000000010B15E20
M DpShMCreate: allocated wall_adm at 0000000010B15E30
X
X Tue Apr 08 17:19:08 2008
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host shsapsrv05
M calling db_connect ...
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C Thread ID:3980
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 72
C patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on SHSAPSRV05
C CopyLocalParameters: dbuser is 'dbo_shd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.3042.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Cache sizes: header 88 bytes, 20000 names (28000000 bytes), 500 dynamic statements (2752000 bytes), total 30752088 bytes
C Using shared procedure name cache SHSAPSRV05_BXT_BXT_SHD_MEM initialized by another process.
C Connected to db server : [SHSAPSRV05] server_used : [np:(local)], dbname: BXT, dbuser: dbo
C pn_id:SHSAPSRV05_BXT_BXT_SHD
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080408 171908 SHSAPSRV05
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 21 0 0
M SHM_PRES_BUF (addr: 0000000017540050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFF3410050, size: 59801600)
M SHM_PAGING_AREA (addr: 0000000017980050, size: 32112640)
M SHM_ROLL_ADM (addr: 0000000019830050, size: 598700)
M SHM_PAGING_ADM (addr: 00000000198D0050, size: 525344)
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 0000000019960050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7440 bytes (50 server) at 00000000199B0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 21, WP_CNT = 23, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 000000001E830160, size: 30000000, end: 00000000204CC4E0)
B dbtbxbuf: Buffer TABLP (addr: 00000000204D0160, size: 10240000, end: 0000000020E94160)
B dbexpbuf: Buffer EIBUF (addr: 0000000020EB0170, size: 4194304, end: 00000000212B0170)
B dbexpbuf: Buffer ESM (addr: 00000000212C0170, size: 4194304, end: 00000000216C0170)
B dbexpbuf: Buffer CUA (addr: 00000000216D0170, size: 3072000, end: 00000000219BE170)
B dbexpbuf: Buffer OTR (addr: 00000000219C0170, size: 4194304, end: 0000000021DC0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000012DFAFB0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0000000029DA00C0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0000000029DA06E0
S using messages for server info
S size of spec char cache entry: 165024 bytes (timeout 100 sec)
S size of open spool request entry: 1184 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 5744kb, dir_size: 5656kb.
A Attached to PXA (address 000007FFF6D20050, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF4FE7E000 leng=20955136 end=000007FF5127A000)
A >> Shm MMADM area (addr=000007FF5024A2E0 leng=261120 end=000007FF50289EE0)
A >> Shm MMDAT area (addr=000007FF5028A000 leng=16711680 end=000007FF5127A000)
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 23982 bytes at 0000000029EC0050
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\put\BXT\DVEBMGS01\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\put\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITSP ICMAN is not active: Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E
E Tue Apr 08 17:19:09 2008
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M ThCheckPrevUser: clean previous user T21/U22/M0/I0/V-1
M
M Modeinfo for User T21/M0
M
M tm state = 2
M uid = 22
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M ext_session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M imode = 0
M mode state = 0x42
M mode clean_state = 1
M task_type = ZTTASPO
M lastThFc = THFCSPO
M lastAction = TH_IACT_NO_ACTION
M th_errno = 5
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 0
M roll state = 3
M abap state = 3
M em state = 2
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 000007FF51285070
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M async_receives = 0
M vm = no VM
M
M ThCheckPrevUser: reset spa state for user T21/U22/M0
M LOCK WP ca_blk 276
M LOCK APPC ca_blk 92
M set task type ZTTASPO
M ThCleanPrevUser: clean U22 T21 M0 I0 V-1 from previous wp
M ThCleanPrevUser: saved MODE_REC = 40
M PfStatDisconnect: disconnect statistics
M ThRollIn: roll in T21/U22/M0/I0 (level=7, abap_level=1, attach_em=1)
M ThCheckEmState: check ATTACH for em hdl 0
M ThCheckEmState: call EmContextAttach (em_hdl=0)
M ThRollIn: U22 M0 I0 (Level 7) ok
M ThRollIn: roll in abap store
M ThIAMDel: delete tid/mode 21/0 (th_errno 23, release 1)
M ThTSCancel: set T21/M0 in status MODE_CANCEL
M ThIDeleteMode (21, 0, 3, ><, 0, 255, TRUE)
M ThIDeleteMode: no modes found ..
M no sub modes
M ThSUsrDel: delete system user
M RstrNotifyUserChange: user/client = (SAPSYS /000)
M ThResFree: free resources of U22 M0 I0 (normal mode, complete free) at level 3, errno=23, db_action=TH_DB_NO_ACTION, pooling=1
M ThResFree: reset spa state for user T21/U22/M0
M ThCallHooks: call hook >HttpClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >abRtmClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_SESSION_CANCEL
M PfStatDisconnect: disconnect statistics
M ThDealComm: T21/U22/M0 has no cpic conns
M clean up all internal modes of T21/U22/M0
M call ab_endmode (END_MODE_CLEAR_ALL)
M RstrNotifyUserChange: user/client = (SAPSYS /000)
M ***LOG R47=> ThResFree, delete (001023) [thxxmode.c 1357]
M ThVmcCleanMode (deleteOfMainMode=1, AoS=0)
M ThSesGetSessionType: no associated entry
M ThSesIsJavaSessionId: no associated entry
M ThVmcCleanMode o.k.
M ThGetEnqInfo: no enq info found
M ThVBIRollBack: initialize TH-hooks
M SosRegisterHook: add hook >ThVBICmRbHook(00000000005BE2C0)< for event AFTER_COMMIT
M SosRegisterHook: add hook >ThVBICmRbHook(00000000005BE2C0)< for event AFTER_ROLLBACK
M ThRmLocQueue: no async request found
M ThPageFree: free (22,0,0, mode = 3)
M ThRollFree: free (22,0,0, mode = 3)
M ThRmFree: cleanup resources for T21 M0
M RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 000000001068DEC8/0000000000000000/0/1/0
M RmCleanUpResources3: no resources registered
M ThRmFree: reset eg state of T21 M0
M ThRmFree cleanup resources for T21
M RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 0000000010693420/0000000000000000/1/1/0
M RmCleanUpResources3: no resources registered
M ThRmFree: reset eg state of T21
M ThIEmFree: delete hyper context (hyperHdl=000007FF51285070)
M ThIEmFree: call EmContextDelete (em_hdl=0)
M ThResFree: save spa pointer 000007FFF3135B20 and install dummy spa
M ThCheckComOrRb (event=1, full_commit=0)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCheckComOrRb (event=3, full_commit=0)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >dyKeyTableReset< for event AFTER_COMMIT
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThISend: (tm/type/info = 21/0x41/0x0, mode_deleted=1)
M abap strategy ROLL / O.K.
M ThRqOutCheck: o.k.
M ThNewWpStat (type=0x41, task_switch=1, inline_hold=0, hand_shake=0, debug=0, ..)
M ThNewWpStat: new MODE_REC = 0x40
M ThNewWpStat: set mode wait
M ThNewWpStat: new state of T21/M0 = 0x49
M ThISend: new wp stat: 0x2
M rdisp/wp_auto_restart = 0 sec
M rdisp/wp_abap_restart = 0
M ThSetThToolParam : restartable_wp[0] = FALSE
M ThSetThToolParam : restartable_wp[1] = TRUE
M ThSetThToolParam : restartable_wp[2] = TRUE
M ThSetThToolParam : restartable_wp[3] = FALSE
M ThSetThToolParam : restartable_wp[4] = TRUE
M ThSetThToolParam : restartable_wp[5] = TRUE
M ThSetThToolParam : restartable_wp[6] = TRUE
M ThMkReq: send output to canceled mode
M ThDtWpBlk: detach WP ca_blk 276
M ThISend: complete stat record
M ThISend: stat_state = TH_STAT_WRITE
M ThISend: th_wp_waits_for_rq = TH_WP_WAITS_FOR_RQ
M make DISP owner of wp_ca_blk 276
M DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 49)
M -OUT- sender_id WORK_PROCESS tid 21 wp_ca_blk 276 wp_id 21
M -OUT- action SEND_TO_DP uid 22 appc_ca_blk -1 type NOWP
M -OUT- new_stat WP_WAIT mode 0 len 8 rq_id 49
M -OUT- req_info CANCELMODE
M REL APPC ca_blk 92
M ThDtAppcBlk: detach APPC ca_blk 92
M PfClearAllRec: clear statistic area
M PfStatDisconnect: disconnect statistics
M ThISend: set inPrivMode = 0 for T21/M0
M ThSysUsrCheck (1,1): check system user T21/U22/M0
M ThIEmFree: em state of T21/M0 (em_hdl=-1) is DP_EM_NO_CONTEXT
M ThSysUsrCheck: clear T21
M DpITmSlotClear: clear slot 21
M DpListRemove: elem 21 not in tmadm_free_list
M DpListInsert: elem 21 already in tmadm_inuse_list
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SWITCH
M TrThHookFunc: called for task switch
M ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >DbgBeforeTaskSwitch< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SWITCH
M save task type/act rqtype ZTTASPO/5 of T21/M0
M TskhLoop: switch back to normal tracel level 1
A
A Tue Apr 08 17:19:27 2008
A *** ERROR => TEXTENV_INVALID environment: [ablocale.c 205]
A *** ERROR => Locale=`unsupported' Lang=`E' [ablocale.c 211]
A *** ERROR => Country=`0AU' CodePage=`6200'. [ablocale.c 217]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 13168]
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Tue Apr 08 17:19:28 2008
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Tue Apr 08 17:19:28 2008
Please help me out!
Thank you very much!
Edited by: lucy YANG on Apr 8, 2008 11:31 AMCheck to see whether the profile parameter "zcsa/system_language" is set to a value other than D or E in the instance or default profile of the shadow system. If this is the case, change this parameter to D or E. Stop the shadow system and repeat the phase.
How to Stop and Start Shadow sytem :
Stopping the shadow instance
Start R3up (as of Basis 700: SAPup) as the user <sid> adm as follows:
R3up (SAPup) stopshd
Alternatively, you can stop the shadow instance as follows:
<upgrade_directory>/<SID>/homeshd/< SID>/stopsap DVEBMGS<SHDSYSNO> r3
where <SHDSYSNO> is the instance number of the shadow system.
Starting the shadow instance
Start R3up (as of Basis 700: SAPup) as the user <sid> adm as follows:
R3up (SAPup) startshd
Alternatively, you can start the shadow instance as follows:
<upgrade_directory>/<SID>/homeshd/< SID>/startsap DVEBMGS<SHDSYSNO> r3
where <SHDSYSNO> is the instance number of the shadow system.
Edited by: Shaji Jacob on Apr 8, 2008 4:38 PM -
Error in phase SCEXEC_ALIAS in upgrade process(during preprocessing)
Hi all experts,
i encountered error during upgrade from 4.7 to ecc 6
with message :
severe error during SCEXEC_ALIAS phases
file /usr/sap/<SID>/upg/abap/log/PTALDC00.LOG not found
below is some related log content for this error:
tail log of ULOG11_2
Phase SCEXEC_ALIAS:
<sid>adm 20110527220015 : /usr/sap/<SID>/upg/abap/exenew/tp pf=/usr/sap/<SID>/upg/abap/bin/EXDBNEW.TPP execdbscript <SID> -x PTALDC00.XQL DBEXECNONT DBEXECNOCHECK (pid=512002)
<sid>adm 20110527220016 : /usr/sap/<SID>/upg/abap/exenew/tp pf=/usr/sap/<SID>/upg/abap/bin/EXDBNEW.TPP execdbscript <SID> -x PTALDC01.XQL DBEXECNONT DBEXECNOCHECK (pid=1204298)
<sid>adm 20110527220017 :/usr/sap/<SID>/upg/abap/exenew/tp pf=/usr/sap/<SID>/upg/abap/bin/EXDBNEW.TPP execdbscript <SID> -x PTALDC02.XQL DBEXECNONT DBEXECNOCHECK (pid=675990)
tail log of SLOG701
Phase SCEXEC_ALIAS:
ERROR: Connect to <SID> failed (20110527190129, probably wrong environment).
ERROR: Connect to <SID> failed (20110527190130, probably wrong environment).
ERROR: Connect to <SID> failed (20110527190131, probably wrong environment).
my questions are:
1. where is the environment variable stored during this phase which is used by tp tool?
i have checked the profile EXDBNEW.TPP and compared it with other profile in the same directory which have been used by tp before(phases before this one), which resulted in no different for every environment related value.
2. i tried to emulate the execution of the command in ULOG11_2 with default environment of <sid>adm with adjustments(e.g db_ora_scheme=SHDTMP, DIR_LIBRARY= /usr/sap/<SID>/abap/exenew) it run with no error of wrong environment whatsoever >.<, so can i just point the environment scheme to <SID>SHD and executed it manually?well, actually i did not looking at the right place at the error , my apologize for that.
there are another error messages at this log file SCEXEC_A.ECO
TRACE-INFO: 68: [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=110b1b588) 20 0.209414
TRACE-INFO: 69: [dev trc ,00000] SELECT USERID,PASSWD FROM SAPUSER WHERE USERID IN (:A0,:A1)
TRACE-INFO: 70: 11 0.209425
TRACE-INFO: 71: [dev trc ,00000] - oci_bind ( 0: SQLT_STR, l=256, con_hdl=0, stmth_p=110b1b588, vp=9001000a10b6ea2,ip=0,rlp=0,rcp=0)
TRACE-INFO: 72: 21 0.209446
TRACE-INFO: 73: [dev trc ,00000] - oci_bind ( 1: SQLT_STR, l=256, con_hdl=0, stmth_p=110b1b588, vp=fffffffffffd978,ip=0,rlp=0,rcp=0)
TRACE-INFO: 74: 14 0.209460
TRACE-INFO: 75: [dev trc ,00000] -->oci_define ( 0: SQLT_STR, l=256, con_hdl=0, stmth_p=110b1b588, vp=fffffffffffda78,ip=fffffffffffd7a0,rlp=0,rcp=0)
TRACE-INFO: 76: 13 0.209473
TRACE-INFO: 77: [dev trc ,00000] -->oci_define ( 1: SQLT_AFC, l=256, con_hdl=0, stmth_p=110b1b588, vp=fffffffffffdb78,ip=fffffffffffd7a2,rlp=0,rcp=0)
TRACE-INFO: 78: 16 0.209489
TRACE-INFO: 79: [dev trc ,00000] -->oci_execute_stmt(con_hdl=0, stmth_p=110b1b588, iters=1, rowoff=0, dml_batch_errors=0)
TRACE-INFO: 80: 13 0.209502
TRACE-INFO: 81: [dev trc ,00000] OCIStmtExecute() completed, rc=100=OCI_NO_DATA, no further data 8738 0.218240
TRACE-INFO: 82: [dev trc ,00000] -> rc=1403=OCI_ERR_NOT_FOUND 18 0.218258
TRACE-INFO: 83: [dev trc ,00000] <--oci_execute_stmt(rc=1403, iters-errors = 1-0) [time 0,009s] 11 0.218269
TRACE-INFO: 84: [dbsloci. ,00000] *** ERROR => ORA-1403 when accessing table SAPUSER 15 0.218284
TRACE-INFO: 85: [dev trc ,00000] set_ocica() -> SQL code 1403 8 0.218292
TRACE-INFO: 86: [dev trc ,00000] -->oci_get_errmsg (con_hdl=0, rc=1403) 7 0.218299
TRACE-INFO: 87: [dev trc ,00000] OCIErrorGet -> SQL error code: 1403 20 0.218319
TRACE-INFO: 88: [dev trc ,00000] ORA-01403: no data found
TRACE-INFO: 101: [dev trc ,00000] Assigning username to user session: con_hdl=0, usrhp=110c09428 8 0.219570
TRACE-INFO: 102: [dev trc ,00000] Assigning password to user session: con_hdl=0, usrhp=110c09428 12 0.219582
TRACE-INFO: 103: [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0, usr=SAPR3SHD/<pwd>, svchp=110b045e0, srvhp=110b05e88, usrhp=110c09428)
TRACE-INFO: 104: 133 0.219715
TRACE-INFO: 105: [dev trc ,00000] OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR 6298 0.226013
TRACE-INFO: 106: [dev trc ,00000] OCISessionBegin(OCI_DEFAULT) failed with SQL error 28000: 11 0.226024
TRACE-INFO: 107: [dev trc ,00000] ORA-28000: the account is locked
TRACE-INFO: 108: 10 0.226034
TRACE-INFO: 109: [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=110b05e88) 8 0.226042
TRACE-INFO: 110: [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=110b045e0,srvhp=110b05e88) 9 0.226051
TRACE-INFO: 111: [dev trc ,00000] Deallocating server context handle 110b05e88 from con_hdl=0 176 0.226227
TRACE-INFO: 112: [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '28000' 14 0.226241
TRACE-INFO: 113: [dev trc ,00000] set_ocica() -> SQL error code 28000 7 0.226248
TRACE-INFO: 114: [dev trc ,00000] -->oci_get_errmsg (con_hdl=0, rc=28000) 7 0.226255
TRACE-INFO: 115: [dev trc ,00000] OCIErrorGet -> SQL error code: 28000 8 0.226263
TRACE-INFO: 116: [dev trc ,00000] ORA-28000: the account is locked
TRACE-INFO: 117: 10 0.226273
TRACE-INFO: 118: [dblink ,00433] ***LOG BY2=>sql error 28000 performing CON [dblink#4 @ 433] 22 0.226295
TRACE-INFO: 119: [dblink ,00433] ***LOG BY0=>ORA-28000: the account is locked [dblink#4 @ 433] 8 0.226303
From the log, the problem actually lies in authorization for ops$user + locked shadow user account. After corrected these problems, the process continued. But this still bother me how this error came up since other tp processes(phases before this one) run successfully. But i will mark this question as answered. Thanks for all the attention and hope this will help others too ^^. -
Error in phase "main_shdrun/act_upg" upgrade sapnetweaver 7.0 to EHP1
Hello expert,
I get error when upgrade our sapnetweaver pi 7.0 SP09 to EHP1 in phase MAIN_SHDRUN/ACT_UPG. I've try many suggestion in sdn forums, but cannot resolve my troubles. This is the content of file ACTUPG.ELG in my EHPI\abap\log:
LIST OF ERRORS AND RETURN CODES *******
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70105.X00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "8"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70106.X00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "8"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70010.X00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1EEDO536X"Technical Settings" "DB6PMSQ_DB" could not be activated
ETP111 exit code : "8"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70106.X00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "8"
I have try to edit the table from SE11, but it say: the table doesn't exist. And when i try to create the table, it's say: the table already exist.
Please help meHi,
As described in archived SAP note that is no longer available the table DB6PMSQ_DB contains only
SQL Cache snapshot data.
Regarding these Technical Settings
you can ignore these messages regarding technical settings.
Please continue with option "Accept non severe errors and repeat phase"
This should not cause any trouble later in the upgrade or in steps after phase ACT_UPG.
Regards,
Aidan -
Error in Phase START_SHDI_FIRST for Upgrade to ERP6 SR3
Hi Folks
We are performing a test upgrade 46C to ERP6 using the SR3 CDs and I'm stuck at the START_SHDI_FIRST stage.
It's not the "usual" .acl problem.
Here is an excerpt from the SAPup joblog. I also get the same result if I logon as <SID>OFR add the 700 Kernel and use STARTSAP.
Calling STRRMTDB...
Environment variable does not exist.
Environment variable added.
Job 029650/P01OFR/STRRMTDB submitted to job queue QBATCH in library QGPL.
Environment variable removed.
Ownership of object GETOBJINF in QTEMP type *USRSPC changed.
Start profile is "/usr/sap/put/P01/SYS/profile/START_DVEBMGS38_tegerppd".
Executable directory is "/usr/sap/put/exe".
Checking Kernel...
Ownership of object GETOBJINF in QTEMP type *USRSPC changed.
StartInstance: Program STRSBSJOB does not exist (ILE).
O4STRSAP: Starting instance 38 of system P01 on host tegerppd failed.
Errors occurred in command.
Errors occurred in command.
STRSBSJOB does exist in the Kernel library and appears in /usr/sap/put/exe as a link.
Not sure where to go from here.
Any suggestions?
Thanks
SteveHi Steven,
I think, you are trying something forbidden here ;-((
You are in the uptime and try to use STARTSAP for the new kernel, which is not ok.
The correct way to start the shadow is as follows:
- logon with sidofr
- addlible sapup
- check, that the shadow instance is totally down - otherwise kill all processes there
(you could use (try) the following instead as well:
SAPUP UPGDIR('/usr/sap/put') PARMLIST('stopshd') )
- SAPUP UPGDIR('/usr/sap/put') PARMLIST('startshd')
Then it is interesting to see the errors ....
btw:
the well-known error is really not there ?
edtf '/usr/sap/put/X85/SYS/global/ms_acl_info'
HOST = * <<< correct
Then, I do have the next idea as the new second in future "well-known-error":
The locales in the OS will miss for DE and/or US ;-((
In the old kernel, this was no issue, but now, SAP changed its mind and doesn't deliver them as fallback any more ;-(
(note 1077496 tries to explain this change, but I was not able by now to understand this note or to see that it really works like this - especially as I never have the chance to install complete further languages just for this !!!)
My check is always:
Please check with CALL QP2TERM: (NOT QSH!)
cd /usr/lib/nls/loc
ls en*
ls de*
(normally in this directory there are links only, but you can place true
locales here as well)
You need at least the following ones:
en_US.ISO8859-1
en_US.ISO8859-1__64
de_DE.ISO8859-1
de_DE.ISO8859-1__64
=> I do have all needed locales for download and place them (a bit illegal) into /usr/lib/nls/loc - if you are interested in this, let me know.
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de -
Error in PHASE ACT_UPG: Upgrade SAP R/3 4.7 to SAP ECC 6.0 EHP
Hello,
I'm facing an error in phase MAIN_SHDRUN/ACT_UPG (see errors below).
After searching for the errors I found postings with advice to change R3trans and tp to the newest version. Strangely system did not take the newest kernelpatch I stored in upgrade folder. So I changed the files in the /usr/sap/SID/abap/exe folder and repeated the phase.
But the error is still there.
A solution was to reset the queue, but this is only possible with help by sap.
Error in phase: DDIC_ACTIVATION
So I'm waiting for their reaction since two days, but nothing happens.
My questions are now:
what happens if I use the option "initialize phase ACT_UPG to restart it from beginning"? Will the new R3trans be used? Have we got to to the SPDD again?
What happens if I use the option "accept non severe errors and repeat phase ACT_UPG? Are these language errors "non-severe"?
Errors:
In error log ACTUPG.ELG I find logs like:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60016INERECRUIT.REX
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "8"
In error log SAPup.ECO I find:
EXECUTING /usr/sap/REX/upg/abap/exe/tp (/usr/sap/REX/upg/abap/exe/tp) pf=/usr/sap/REX/upg/abap/bin/ACTUPG.TPP put REX
This is /usr/sap/REX/upg/abap/exe/tp version 376.01.14 (release 701)
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Looking for effective putsteps ... ... ready (looking for putsteps)
tp finished with return code: 8
meaning:
A tool used by tp produced errors
Process with ID 13163 terminated with status 8
In the last touched SP-File SAPAAAA701.SID I can find errors like:
"1EEDO545 "LANG" "DTEL" "*": Object information could not be imported"
Regards,
JuliaAfter pushing the message at SAP I got the following answer:
It is the problem from note 1417505. There is no guarantee that all objects where imported with the used R3trans. A rerun of phase will be unsuccessfully because error came up in DDIC_IMPORT.
A reset of the queue is only possible if SPAM/SAINT is used for importing support packages. In case of upgrade, like here, the upgrade has got to be resetted as described in upgrade guide.
After start between phase extraction and configuration the newest R3trans has got to be copied manually in /abap/exe folder.
Regards,
Julia -
Upgrade to ERP6.0 EHP4: Error in phase EHP_INCLUSION
In my upgrade from enterprise 4.7 ext.set 11.0 to erp 6.0 ehp4 I have the error:
Please specify a valid Enhancement Package stack configuration. The ADD-ON and
Support Package selection in the IS_SELECT and the BIND_PATCH phases is taken
from there. For more information, see SAP Note *1022704* .
01) * Cancel dialogue
02) - Repeat stack request from MOPZ (failed with 'No access to Solution Manager System')
03) - Provide stack configuration file in input field below
Select configuration:: Cancel dialogue
I don't want to include any further EHPS. Do I have to extract all packages from DVD EHP4_for_SAP_ERP6.0_NW7.01_Enhancement_Package (mat no 51033594)
Do I have to generate a sp_stack.xml, too ?
EHP_INCLUSION.LOG:
1 ETQ200 Executing actual phase 'PREP_EXTENSION/EHP_INCLUSION'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'ADDONEHP.DMP'
2 ETQ399 Arg[1] = 'NAVERSEHP.DMP'
2 ETQ399 Arg[2] = 'SPDA_EHP_INCLUSION.LOG'
2 ETQ399 Arg[3] = ''
2 ETQ730 Starting upload of all package files in "\\<transporthost>\sapmnt\trans\EPS\in"
4 ETQ010 Date & Time: 20090528151215
4 ETQ230 Starting RFC Login to: System = "T10", GwHost = "xxxxxx", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="T10", Nr="00", GwHost="xxxxxx", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20090528151216
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 EhP stack selection ...
4 ETQ399 ... requesting stacks from Solman/MOPz ...
4 ETQ230 Starting RFC Login to: System = "T10", GwHost = "xxxxxx", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="T10", Nr="00", GwHost="xxxxxx", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_STACK_SELECTION" by RFC
2 ETQ399 Returned table ET_STACKTAB:
Any ideas ?
Edited by: Uta Hedemann on May 28, 2009 3:40 PMHello,
We are performing an installation of EnhP4 with 7.01---SP stack 3. We are not able to continue from the error below. I am able to view the xml file from however SAPehpi is saying the file u201CError reading stack info (rc=3, reason="Stackfile not foundu201D.
I am not able to download another stack from Solmanu2026I am not able to select any Technical Usages to download the files for the stack version.
Any ideas?
EHP_INCLUSION.LOG
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=3, reason="Stackfile not found")
4 ETQ399 EhP stack selection ...
4 ETQ399 ... requesting stacks from Solman/MOPz ...
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_STACK_SELECTION" by RFC
2 ETQ399 Returned table ET_STACKTAB:
4 ETQ399 Reading stack content ...
4 ETQ399 ... reading stack configuration file "D:\EHP4_packages\SMSDXML_CER_20090924145226.720.xml"
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=3, reason="Stackfile not found")
4 ETQ399 EhP stack selection ...
4 ETQ399 ... requesting stacks from Solman/MOPz ...
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_STACK_SELECTION" by RFC
2 ETQ399 Returned table ET_STACKTAB:
4 ETQ399 Reading stack content ...
4 ETQ399 ... reading stack configuration file "D:\EHP4_packages\SMSDXML_CER_20090924145226.720.xml"
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=3, reason="Stackfile not found")
Regards,
Anthony -
Error in phase MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC - EHP3 upgrade
Hello all,
Using SUM while running SCM 7.0 EHP3 upgrade I am getting error in phase MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC:
Checks after phase MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC were negative!
Last error code set: Single errors (code > 8) found in logfile 'MVNTFDC.ELG'<br/> 1 tp processes returned errors. View latest 'TP*.ECO' files in log-directory for details
ERROR: Detected the following errors:
# D:\SUM\abap\log\PD000203.SCD:
3 ETP000 NOT NULL )
3 ETP000 ON [/BIC/FZT_DEL_C1_PSCH000]
3 ETP000 WITH ( DATA_COMPRESSION = PAGE )
3 ETP000
2WETP000 11:10:14: Retcode 1: error in DDL statement for "/1CRR/TG00003781 " - repeat
2EETP345 11:10:26: Retcode 1: SQL-error "2726-Partition function '/BIC/FZT_DEL_C1_PFUN000' uses 1 c
2EETP345 olumns which does not match with the number of partition columns used to partition the tab
2EETP345 le or index." in DDL statement for "/1CRR/TG00003781 "
2 ETP000 --------------- DB-ROLLBACK() ---------------
2EETP334 11:10:26: error in DDL, nametab for "/1CRR/TG00003781" not activated
3 ETP000 NOT NULL )
3 ETP000 ON [/BIC/FZT_DEL_C2_PSCH000]
3 ETP000 WITH ( DATA_COMPRESSION = PAGE )
...skipped 18 more lines. Please see MVNTFDC.html for more information.
I checked some other log files:
MVNTFDC
1 ETQ201 Entering upgrade-phase "MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC" ("20150203110951")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00' Client = '000'
1 ETQ206 Executing pre-phase DB specific actions.
1 ETQ200 Executing actual phase 'MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'TP_MOVENTABS_SHD'
2 ETQ399 Arg[1] = 'INTDEL;INTACT;NOBUFFRESET;SHADOW_ONLY'
2 ETQ399 Arg[2] = 'MF=F,STEP=T,RANGE-TS'
2 ETQ399 Arg[3] = 'MVNTFDC.TP0'
1 ETQ399 Using error summary log 'MVNTFDC.ELG'.
1 ETQ399 Using 8 parallel processes
2 ETQ399 Empty putsteps - configuring at least parallel batches and main import processes.
2 ETQ399 Distribute 8 parallel processes to 2 tp and 4 R3trans.
4 ETQ380 computing toolpath for request "TP_MOVENTABS_SHD"
4 ETQ381 request "TP_MOVENTABS_SHD" means "tp mvntabs for shadow tables"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_SHD"
4 ETQ399 Requirement for tp maps to 'exe'
4 ETQ383 translates to path "D:\SUM\abap\exe"
2 ETQ399 Starting 8 tp processes:
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 7444 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP00.ECO'.
2 ETQ399 Started tp ddlntabs with pid 7444
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 4888 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=01" "seltsize=1" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP01.ECO'.
2 ETQ399 Started tp ddlntabs with pid 4888
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 9100 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=02" "seltsize=2" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP02.ECO'.
2 ETQ399 Started tp ddlntabs with pid 9100
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 736 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=03" "seltsize=3" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP03.ECO'.
2 ETQ399 Started tp ddlntabs with pid 736
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 8864 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=04" "seltsize=4" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP04.ECO'.
2 ETQ399 Started tp ddlntabs with pid 8864
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 9264 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=05" "seltsize=5" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP05.ECO'.
2 ETQ399 Started tp ddlntabs with pid 9264
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 9732 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=06" "seltsize=6" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP06.ECO'.
2 ETQ399 Started tp ddlntabs with pid 9732
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 11492 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=07" "seltsize=7" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP07.ECO'.
2 ETQ399 Started tp ddlntabs with pid 11492
3 ETQ123 20150203110954: PID 9264 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110954: PID 7444 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110954: PID 4888 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110954: PID 736 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110954: PID 9732 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110956: PID 11492 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110956: PID 9100 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110956: PID 8864 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
2 ETQ399 Looking for pattern 'PD00....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD000203.SCD'.
1 ETQ124 Scanned file 'log\PD000203.SCD' from offset 9525 to 12695 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD00....\.SCD'
2 ETQ399 Looking for pattern 'PD01....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD010203.SCD'.
1 ETQ124 Scanned file 'log\PD010203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD01....\.SCD'
2 ETQ399 Looking for pattern 'PD02....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD020203.SCD'.
1 ETQ124 Scanned file 'log\PD020203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD02....\.SCD'
2 ETQ399 Looking for pattern 'PD03....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD030203.SCD'.
1 ETQ124 Scanned file 'log\PD030203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD03....\.SCD'
2 ETQ399 Looking for pattern 'PD04....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD040203.SCD'.
1 ETQ124 Scanned file 'log\PD040203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD04....\.SCD'
2 ETQ399 Looking for pattern 'PD05....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD050203.SCD'.
1 ETQ124 Scanned file 'log\PD050203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD05....\.SCD'
2 ETQ399 Looking for pattern 'PD06....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD060203.SCD'.
1 ETQ124 Scanned file 'log\PD060203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD06....\.SCD'
2 ETQ399 Looking for pattern 'PD07....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD070203.SCD'.
1 ETQ124 Scanned file 'log\PD070203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD07....\.SCD'
2 ETQ399 Starting 1 tp processes:
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203111013: PID 8692 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP00.ECO'.
2 ETQ399 Started tp ddlntabs with pid 8692
3 ETQ123 20150203111050: PID 8692 exited with status 8 (time 0.000 real)
2EETQ399 tp ddlntabs failed with exit code 8.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD00....\.SCD'
1 ETQ124 Scanned file 'log\PD000203.SCD' from offset 12805 to 18826 for errors.
4 ETQ399 html file conversion from 'D:\SUM\abap\log\MVNTFDC.ELG' to 'MVNTFDC.html' succeeded.
4 ETQ010 Date & Time: 20150203111051
1EETQ399 Last error code set is: Single errors (code > 8) found in logfile 'MVNTFDC.ELG'
1 tp processes returned errors. View latest 'TP*.ECO' files in log-directory for details
1EETQ203 Upgrade phase "PARMVNT_FDC" aborted with errors ("20150203111051")
TP00.ECO
SAPup> Starting subprocess in phase 'TP_ACTION_CP2SINI' at 20150202112054
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\CP2SHDI.TPP" r3e SAPKBBF740 -s SCD u18
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
This is D:\SUM\abap\exe\R3trans.exe version 6.24 (release 741 - 11.08.14 - 17:21:00).
unicode enabled version
D:\SUM\abap\exe\R3trans.exe finished (0004).
INFO: No client specified on command line. Taking client 0 from E070C.
tp finished with return code: 4
meaning:
A tool used by tp produced warnings
SAPup> Process with PID 7592 terminated with status 4 at 20150202112055!
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150202213004
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 0
meaning:
Everything OK
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150202213118
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 8
meaning:
A tool used by tp produced errors
SAPup> Process with PID 5336 terminated with status 8 at 20150202213638!
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203102328
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 0
meaning:
Everything OK
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203102350
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 8
meaning:
A tool used by tp produced errors
SAPup> Process with PID 10396 terminated with status 8 at 20150203102427!
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203110952
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 0
meaning:
Everything OK
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203111013
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 8
meaning:
A tool used by tp produced errors
SAPup> Process with PID 8692 terminated with status 8 at 20150203111050!
Can someone please help ?Hi Pankaj,
did you get any solution for this issue ? I am also facing the same error in my BW upgrade to EHP3.
Please share the solution if you get any.
Regards, -
SRM 4.0 upgrade to SRM 7.0 - Error in Phase PARDIST_SHD
Hello,
I am upgrading the SAP SRM 4.0 / MSSQL 2005 / Windows 2003 (64 bit) to SRM 7.0 but I am getting this error in the phase PARDIST_SHD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DISTRIBUTION ERRORS and RETURN CODE in DS100310.SD1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EEDA300 No active nametab exists for "CDBC_LANG_TABLES"
Long text:
Cause
Thee is no active nametab in the system, although an
active ABAP/4 Dictionary object was expected.
System Response
None
What to do
Reactivate the ABAP/4 Dictionary object.
2EEDA432 Termination due to inconsistencies
2EEDA471 Result "CDBC_LANG_TABLES": Action: "DNA" Mode flag: "R" Return code: "9"
2EEDA300 No active nametab exists for "CRMC_ADJCONT"
Long text: see above
2EEDA432 Termination due to inconsistencies
2EEDA471 Result "CRMC_ADJCONT": Action: "DNA" Mode flag: "R" Return code: "9"
2EEDA300 No active nametab exists for "CRMC_HH_SRV_SYNC"
Long text: see above
2EEDA432 Termination due to inconsistencies
2EEDA471 Result "CRMC_HH_SRV_SYNC": Action: "DNA" Mode flag: "R" Return code: "9"
2EEDA300 No active nametab exists for "CRMC_PROCESSFLTT"
Long text: see above
2EEDA432 Termination due to inconsistencies
2EEDA471 Result "CRMC_PROCESSFLTT": Action: "DNA" Mode flag: "R" Return code: "9"
2EEDA300 No active nametab exists for "CRMC_PROCESS_FLT"
Long text: see above
2EEDA432 Termination due to inconsistencies
2EEDA471 Result "CRMC_PROCESS_FLT": Action: "DNA" Mode flag: "R" Return code: "9"
2EEDA300 No active nametab exists for "IPCE_MON_NODES"
Long text: see above
2EEDA432 Termination due to inconsistencies
2EEDA471 Result "IPCE_MON_NODES": Action: "DNA" Mode flag: "R" Return code: "9"
What will I do now? How will resolve this issue? Please help me ASAP
Thanks
GautamGo to SE11, Menu->Utilities->Database Object->Check
Menu->Utilities->Runtime Object->Check
If there are inconsistency, please follow note 211492 to adjust the inc
onsistency in original instance . But if these tables are obsolete,
for example doesn't exist in the system any more, you could also choose the option to 'Ignore' the error and
continue with the upgrade. But this is a BC-UPG issue.
Regards
Lauren -
EHP4 upgrade: Error in Phase ACT_UPG
Hi All,
While upgrading to EHP4 on ECC 6 system, we got error in phase MAIN_SHDRUN/ACT_UPG
Checks after phase MAIN_SHDRUN/ACT_UPG were negative!
Last error code set: Unresolved requests in buffer RH4 Check logfiles 'ACTUPG.ELG' and '/sapdump/SAPehpi/EHPI/abap/log/SAPehpi.ECO'
ACT_UPG log:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-604DMINISPSCA.RH4
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "12"
Log of SAPA-604DMINISPSCA.RH4
1 ETP155 ACTIVATION OF DD-OBJECTS
1 ETP101 transport order : "SAPK-604DMINISPSCA"
1 ETP102 system : "RH4"
1 ETP108 tp path : "/sapdump/SAPehpi/EHPI/abap/exe/tp"
1 ETP109 version and release : "372.04.70" "700"
1 ETP198
3 EPU324 See log for request "/sapdump/SAPehpi/EHPI/abap/tmp/SAPAB70015.RH4" (timestamp "01:26:08", system "RH4")
1AETR012XProgram terminated (job: "RDDMASGL", no.: "01260600")
1AEPU320 See job log"RDDMASGL""01260600""RH4"
1 ETP155 ACTIVATION OF DD-OBJECTS
1 ETP110 end date and time : "20091012033215"
1 ETP111 exit code : "12"
1 ETP111 exit code : "12"
Job RDDMASG log :
Job cancelled with following log
2.10.2009 01:26:07 Job started 00 516 S
2.10.2009 01:26:07 Step 001 started (program RDDMASGL, variant IMPACTMRG, user ID DDIC) 00 550 S
2.10.2009 01:26:08 Start of mass activation 01:26:08 AD 010 S
when tried to log into shadow instance after getting error, it is giving error
RH4: system message
work process restarted; session terminated;
we restarted shadow system. There is no dumps in the shadow system.
Work process getting killed after 7800s
checked in work directory of Shadow system: devdisp log :_*
Mon Oct 12 04:49:46 2009
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1694]
***LOG Q0K=> DpMsAttach, mscon ( HW136799) [dpxxdisp.c 12639]
DpStartStopMsg: send start message (myname is >HW136799_RH4_22 <)
DpStartStopMsg: start msg sent
Warning: Swap space is configured quite small with 20477 MB.
It should be configured with at least 20 GB on 64 bit systems.
See note 153641 for more information.
Warning: tmpfs at /dev/shm is configured quite small with 1972 MB!
Minimum value is 8192 MB.
Recommended size is 75 % of RAM + swap.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Mon Oct 12 04:49:47 2009
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 221
Release check o.K.
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Mon Oct 12 06:57:01 2009
ERROR => DpWPCheck: W8 (pid 9769) died (severity=0, status=7) [dpxxdisp.c 15776]
child (pid=9769) killed with signal 7
Mon Oct 12 06:57:43 2009
ERROR => DpWPCheck: W7 (pid 9768) died (severity=0, status=7) [dpxxdisp.c 15776]
child (pid=9768) killed with signal 7
Please let us know what needs to be cheked for the problem
Thanks,
Ramesh RamagowniHi Markas and All,
Thanks for the information. /dev/shm was 100% full. now, the issue is solved after deleting its contents. and we have finished with EHP4 upgrade.
After upgrade, SAP_AP component still showing as 700
SAP_AP - 700 - 0015 - SAPKNA7015 -SAP Application Platform
Can we delete old tablespace PSAPSR3700, it is showing as 0% used in brspace at present.
Also while trying to move some datafiles using brtools after upgrade we are getting following error,
BR0280I BRTOOLS time stamp: 2009-10-20 01.45.52
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
c
BR0280I BRTOOLS time stamp: 2009-10-20 01.45.54
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0252E Function fopen() failed for '/oracle/RH4/sapbackup/.user.pas' at location BrToolCall-2
BR0253E errno 13: Permission denied
BR0669I Cannot continue due to previous warnings or errors - you can go back to repeat the last action
BR0280I BRTOOLS time stamp: 2009-10-20 01.45.54
BR0671I Enter 'b[ack]' to go back, 's[top]' to abort:
There is no file in the directory '/oracle/RH4/sapbackup/.user.pas'
Please suggest what needs to be for this issue..Do we need to upgrade BRTOOLS..
Thanks,
Ramesh R -
Error encountered in phase SHDINST_DB_PREP - EHP1 upgrade using EHPI.
Hi Experts,
I am currently in the configuration phase of Enterprise Portal upgrade from 700 to EHP1 then i got this error in phase SHDNST_DB_PREP, I am using OS platform Windows Server 2003; here is the message:
On the EHPi GUI:
Decide how you want to continue
Checks after phase PREP_INSTALL/SHDINST_DB_PREP were negative!
Last error code set: Process 'brconnect' exited with 5, see 'D:\EHPI\abap\log\SHDUSRCRE.LOG' for detai
Trouble Ticket Generation
A trouble ticket and an archive with all relevant log files have been generated. Trouble ticket: "D:\EHPI\abap\log\SAPehpi_troubleticket.log" Log archive: "D:\EHPI\abap\log\SAPehpi_troubleticket_logs.sar"
Choose Action:
Repeat phase SHDNST_DB_PREP to continue at the point it stopped.
Restart the current module from the beginning
Exit this program
for SHDUSRCRE.LOG:
SAPehpi> Starting subprocess brconnect with id 13588 at 20100816143027
Environment: CLASSPATH=C:\oracle\CUSDEV01\102\jdbc\lib\ojdbc14.jar;
Environment: JAVA_HOME=C:\j2sdk1.4.2_13-x64
Environment: NLS_LANG=AMERICAN_AMERICA.UTF8
Environment: ORACLE_HOME=C:\oracle\EP1\102
Environment: ORACLE_SID=EP1
Environment: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
Environment: Path=E:\oracle\CUSPRD01\102\bin;C:\oracle\CUSDEV01\102\bin;C:\oracle\EP1\102\BIN;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Dell\SysMgt\oma\bin;C:\usr\sap\EP1\SYS\exe\uc\NTAMD64;C:\Program Files (x86)\Dell\SysMgt\oma\bin
Environment: auth_shadow_upgrade=0
Environment: dbms_type=ora
Environment: dbs_ora_schema=SAPEP1
Environment: dbs_ora_tnsname=EP1
BR0801I BRCONNECT 7.00 (42)
BR0280I BRCONNECT time stamp: 2010-08-16 14.30.28
BR0301E SQL error -28003 at location crown_main-1, SQL statement:
'/* BRCONNECT */ CREATE USER "SAPEP1SHD" IDENTIFIED BY "kXZvHmKI.42aB"'
ORA-28003: password verification for the specified password failed
ORA-20003: Password should contain at least one \
digit, one character and one punctuation
BR1336I Creating database owner SAPEP1SHD failed
BR0280I BRCONNECT time stamp: 2010-08-16 14.30.28
BR0804I BRCONNECT terminated with errors
Process with ID 15076 terminated with status 5
Did you encounter this error? How can i solve it?
Thanks a lot!
Regards,
TonyHello Experts,
I already solved the issue, just creating the user manually at command promp,
the problem is that the password that SAP generated was not compatible or not acceptble to the system that is why i manually created the user:
SQL> CREATE USER SAPEP1SHD IDENTIFIED BY kXZvHmKI_42aB; - > correct one
SQL> CREATE USER SAPEP1SHD IDENTIFIED BY kXZvHmKI.42aB; - > incorrect; generated by the system
Thanks & Regards,
Tony -
Error: DEPLOY_ONLINE Phase : Upgrade
hi
We are upgrading NW2004 to NW2004s
(EP 6 SP16 to EP 7 SP10)
we got stuck in following phase below
system info
OS: Win2K3
DB: Oracle 9.2.0.6 Upgraded to Oracle 10.2.0.2
SAP: EP6 SP16 <b>Upgrading</b> to EP7 SP10
following is the log file attached
DEPLOY_SLOT_0_DON_03.log
Sep 17, 2007 4:34:50 PM Info: Starting: Update: Selected development component 'tc/sdt/cvl'/'sap.com'/'SAP AG'/'7.0004.20050509132518.0000' updates currently deployed development component 'tc/sdt/cvl'/'sap.com'/'SAP AG'/'7.0004.20050509132518.0000'.
Sep 17, 2007 4:34:50 PM Info: SDA to be deployed: F:\usr\sap\MYP\JC00\SDM\root\origin\sap.com\tc\sdt\cvl\SAP AG\7.0004.20050509132518.0000\sap.comtcsdt~cvl.sda
Sep 17, 2007 4:34:50 PM Info: Software type of SDA: library
Sep 17, 2007 4:34:50 PM Info: ***** Begin of SAP J2EE Engine Deployment (Library component of SAP J2EE Engine) *****
Sep 17, 2007 4:34:51 PM Info: Begin of log messages of the target system:
07/09/17 16:34:50 - ***********************************************************
07/09/17 16:34:50 - Start deploying library JAR F:\usr\sap\MYP\JC00\SDM\root\origin\sap.com\tc\sdt\cvl\SAP AG\7.0004.20050509132518.0000\sap.comtcsdt~cvl.sda...
07/09/17 16:34:51 - Library F:\usr\sap\MYP\JC00\SDM\root\origin\sap.com\tc\sdt\cvl\SAP AG\7.0004.20050509132518.0000\sap.comtcsdt~cvl.sda successfully deployed on the server.
Sep 17, 2007 4:34:51 PM Info: End of log messages of the target system.
Sep 17, 2007 4:34:51 PM Info: ***** End of SAP J2EE Engine Deployment (Library component of SAP J2EE Engine) *****
Sep 17, 2007 4:34:51 PM Info: Finished successfully: development component 'tc/sdt/cvl'/'sap.com'/'SAP AG'/'7.0004.20050509132518.0000'
Sep 17, 2007 4:34:51 PM Info: Starting: Initial deployment: Selected software component 'SAP_JTECHS'/'sap.com'/'SAP AG'/'1000.7.00.4.1.20050921171800' will be deployed.
Sep 17, 2007 4:34:51 PM Error: Aborted: software component 'SAP_JTECHS'/'sap.com'/'SAP AG'/'1000.7.00.4.1.20050921171800':
No further description found.
Sep 17, 2007 4:34:52 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Sep 17, 2007 4:34:52 PM Error: -
At least one of the Deployments failed -
Sep 17, 2007 4:34:52 PM Info: Summarizing the deployment results:
Sep 17, 2007 4:34:52 PM Warning: Warning: F:\usr\sap\JUPGRADE\data\archives\EPBC04_1.SCA
Sep 17, 2007 4:34:52 PM Warning: Warning: F:\usr\sap\JUPGRADE\data\archives\NWMADMIN04_1.SCA
Sep 17, 2007 4:34:52 PM Error: Aborted: F:\usr\sap\JUPGRADE\data\archives\SAPJTECHS04_1.SCA
Sep 17, 2007 4:34:52 PM Error: Processing error. Return code: 4
DEPLOY_ONLINE_DON_03.log
ols.procx.DefaultProcessAdapter.checkReturnCode(DefaultProcessAdapter.java:530)#Java###Return code condition success evaluated to false for process java.exe for action ACTION_DEPLOY_LIST.##
#1.5#C000AC1904D2000000000B5E00D19BC800043A52C62F1410#1190027093546#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/DEPLOY_ONLINE##com.sap.sdt.j2ee.tools.sdmprocess.AbstractSDMProcessCall.deployList(AbstractSDMProcessCall.java:705)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.j2ee.tools.sdmprocess.AbstractSDMProcessCall.deployList(AbstractSDMProcessCall.java:705)#Java###Cannot execute Java process for deployList with parameters F:/usr/sap/JUPGRADE/tmp/SLOT.DEPLOY.PRE.01.LST.##
#1.5#C000AC1904D2000000000B5F00D19BC800043A52C62F5290#1190027093562#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/DEPLOY_ONLINE##com.sap.sdt.j2ee.phases.PhaseTypeSDMProcess.execute(PhaseTypeSDMProcess.java:681)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.j2ee.phases.PhaseTypeSDMProcess.execute(PhaseTypeSDMProcess.java:681)#Java###Error while executing SDM process phase with action DEPLOY_SLOT. See F:
usr
sap
JUPGRADE
log
DEPLOY_SLOT_0__DON_03.LOG for details.##
#1.5#C000AC1904D2000000000B6000D19BC800043A52C62F5290#1190027093562#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/DEPLOY_ONLINE##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:779)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:779)#Java###Phase has been completed.#1#UPGRADE/UPGRADE/DEPLOY_ONLINE#
#1.5#C000AC1904D2000000000B6100D19BC800043A52C62F5290#1190027093562#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/DEPLOY_ONLINE##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:780)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:780)#Java###Start time: .#1#2007/09/17 16:20:59#
#1.5#C000AC1904D2000000000B6200D19BC800043A52C62F5290#1190027093562#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/DEPLOY_ONLINE##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:781)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:781)#Java###End time: .#1#2007/09/17 16:34:53#
#1.5#C000AC1904D2000000000B6300D19BC800043A52C62F5290#1190027093562#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/DEPLOY_ONLINE##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:782)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:782)#Java###Duration: .#1#0:13:54.062#
#1.5#C000AC1904D2000000000B6400D19BC800043A52C62F5290#1190027093562#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/DEPLOY_ONLINE##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:783)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:783)#Java###Phase status is .#1#error#
kindly provide solution for this
kindly do the needful
regards
SHOEBHi,
The problem is with the SDM (Most probably).
Kinldy make sure that your SDM is running properly!
YOu can check this via jcmon utility.
" jcmon pf=PATH_FOR_INSTANCE_PROFILE "
for exmaple : " jcmon pf=/usr/sap/C11/sys/profile/C11_JC00_testpc "
You might need to change the SDM mode to standalone
Please refer the lilnk for details on that.
http://help.sap.com/saphelp_nw04/helpdata/en/4e/67118041b142f8a6b4d5bf8ca56422/content.htm
I hope this helps you! incase if not please intimate me....
Regards,
Prem -
Error at Phase SHDINST_OS in 4.71 upgrade
Hi,
I am getting the below error. i created a service SAPDEV_01 by using the below give syntax, it was created but when i am trying to start that service(SAPDEV_01) i am getting an error called " cannot start the service in the local computer. error1069: service could not start due to logon failure." so please help me in solving below error:
START OF PHASE SHDINST_OS
An error occurred during the installation of the
SAP service SAPDEV_01:
Possibly the password for user .\SAPServiceDEV entered in phase
INITPUT was wrong. You can reset it by calling 'R3up set stdpar'.
Try to execute SAPSTARTSRV.EXE manually using the following syntax:
C:\usr\sap\put\exe\sapstartsrv.exe -r
-p C:\usr\sap\put\DEV\SYS\profile\START_DVEBMGS01_home1 -s DEV -n 01
-U .\SAPServiceDEV -P <PASSWORD> -e HOME1\devadm
and check if the service SAPDEV_01 can be stopped and restarted.this post is duplciated at Re: Error at Phase SHDINST_OS in 4.71 upgrade
Maybe you are looking for
-
Is there a way of getting iphoto to check for duplicates?
i am a comparatively new user to macs and it seems that as i synch my i phone to my mac i am getting the same events imported again into iphotos - i have been merging these events rather than have duplicate events ... but there are inevitable dupli
-
Hi...Thanks in advance for any help you may have. Is it possible to view the videos that I download on a TV via a Playstation 2 game console? I plan to burn them to a disc.
-
Is the any standard report showing, SO/Billing report by material with Tax code thanks
-
I would appreciate an analysis from those of you who have climbed the upgrade path (vs buying in at the top) about the substantive differences between the three versions in the subject line. I own FW MX and have not used it much in the past but now a
-
I have had Itunes on my pc for years. Worked fine last night. Today it gave me a message missing MSVCR80.dll, tried reinstalling, didn't work. Removed Itunes completely, reinstalled. Didn't work. Same message. Any fix ideas?