ERROR in phase PREP_INPUT/SCANDIR_EXTRACT
i am upgrading my sap system to ehp4, in PREP_INPUT/SCANDIR_EXTRACT phase , an error occurred , it says " no entry with key '
RADSND\sapmnt\trans\EPS/in/CSS0120024545_0004742.PAT.
checked the log files
CURRENTPHASE PREP_INPUT/SCANDIR_EXTRACT
...started at 20110303145435
Using phase log file 'SCANDIRX.LOG'.
Error message set: 'Extraction of 'I:\downloads\KD00034.CAR' failed due to missing free space.'
...begin dialogue at 20110303145816
...end dialogue at 20110303150425
..answered at 20110303150425.
-> decided to try again.
CURRENTPHASE PREP_INPUT/SCANDIR_EXTRACT
...started at 20110303150425
Using phase log file 'SCANDIRX.LOG'.
Error message set: 'No entry with key '
RADSND\sapmnt\trans\EPS/in/CSS0120024545_0004742.PAT''
...begin dialogue at 20110303150807
2 ETQ399 Field DELI_DATE is '20081001'.
2 ETQ399 Field DELI_TIME is '092652'.
2 ETQ399 File '
RADSND\sapmnt\trans\EPS\in\CSR0120031469_0033200.PAT' determined as 'COMPONENT=EA-APPL,COMP_REL=603,EPSSUBJECT=EA-APPL===603,PATCH_TYPE=ACP,TO_REL=0002,type=PATFILE'.
3 ETQ399 Entry for file '
RADSND\sapmnt\trans\EPS\in\CSR0120031469_0033200.PAT' was updated.
1 ETQ399 Scanning PAT file '
RADSND\sapmnt\trans\EPS/in/CSS0120024545_0004742.PAT':
2WETQ399 Unrecognized PAT file '
RADSND\sapmnt\trans\EPS/in/CSS0120024545_0004742.PAT'!
2WETQ399 File '
RADSND\sapmnt\trans\EPS/in/CSS0120024545_0004742.PAT' could not be recognized!
please help..
Hi
Error message set: 'Extraction of 'I:\downloads\KD00034.CAR' failed due to missing free space.'
Check space in EPSINBOX
Error message set: 'No entry with key '
RADSND\sapmnt\trans\EPS/in/CSS0120024545_0004742.PAT''
Check that all files .SAR and .CAR is uncar in EPSINBOX, uncar any file manually that not found in EPSINBOX and try again phase.
Other option is that restart EHPI and ensure that all package .SAR and .CAR is in download directory and that this files are OK.
Kind Regards
William Neira
Similar Messages
-
EhP4-Upgrade: error in phase PREP_INPUT/KX_CPYORG
Hi!
I try to execute a EHP4 upgrade for SAP ECC system with EhP Installer.
The programm stopps after several repeat attempts in the the phase PREP_INPUT/KX_CPYORG.
The error I get is:
CURRENTPHASE PREP_INPUT/KX_CPYORG
...started at 20090320163915
Using phase log file 'KX_CPYORG.LOG'.
Kernel is replicated from D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64.
Error message set: 'File 'D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64\##f' does not exist: The system cannot find the file specified.
...begin dialogue at 20090320164430
How can I solve this problem?
Thank you very much!
regards
Ju00FCrgenHi
Don't know if it is still relevant (or even the same issue) but I had a similar problem with a file ##f not found directly after a mention of "reading dbclient.lst" in the log, and I fixed it by opening dbclient.lst in notepad and saving it again as ANSI. The original was Unicode and I noticed some other .lst file was ANSI. Hope this helps.
Best regards
Mischa -
EHP4 Installation: Error in Phase PREP_INPUT/KX_CPYORG
Hi!
I try to execute a EHP4 installation for SAP ECC system with EhP Installer.
The programm stopps after several repeat attempts in the the phase PREP_INPUT/KX_CPYORG.
The error I get is:
CURRENTPHASE PREP_INPUT/KX_CPYORG
...started at 20090320163915
Using phase log file 'KX_CPYORG.LOG'.
Kernel is replicated from D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64.
Error message set: 'File 'D:\usr\sap\GE6\SYS\exe\nuc\NTAMD64\##f' does not exist: The system cannot find the file specified.
...begin dialogue at 20090320164430
How can I solve this problem?
Thank you very much!
regards
Ju00FCrgenHi,
Iam in the process of installing EHP-4, i am unable to find the dowload locations for EHP-4.
Can anyone help me in downloading these packages for ECC6.0. Currently i dont have Solution Manager 7.0 to download these packages from Maintenance Optimizer.
Thanx,
SBS Administrator. -
EHP5 Installation: Error in Phase PREP_INPUT/KX_CPYORG
Hi there,
happy new to year to all of you
I have a problem with the EHPI (latest version). In Phase "PREP_INPUT/KX_CPYORG" i get the following error:
KX_CPYORG.LOG:
1 ETQ200 Executing actual phase 'PREP_INPUT/KX_CPYORG'.
1 ETQ399 Source directory: D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64
1 ETQ399 optional list file 'dbclient.lst' not found at directory 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64' - copy files skipped
1 ETQ399 optional list file 'igsexe.lst' not found at directory 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64' - copy files skipped
1 ETQ399 optional list file 'sapcrypto.lst' not found at directory 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64' - copy files skipped
1 ETQ399 Using copy list: instance.lst
1 ETQ399 Using copy list: instancedb.lst
1 ETQ399 Copying files from 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64' to 'D:\usr\sap\EHPI\abap\exe'
2 ETQ399 Reading list file 'D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64\instance.lst'
The problem here is its an unicode System - ever was! and there is no path D:\usr\sap\BIL\SYS\exe\ nuc \NTAMD64 but a D:\usr\sap\BIL\SYS\exe\ uc \NTAMD64
The Systems' profile parameter OS_UNICODE says: "uc". DIR_CT_RUN says "D:\usr\sap\BIL\SYS\exe\uc\NTAMD64"
So why does the EHPI think this is a Non-Unicode system?
Any ideas?
regards,
MarkusWhen i check the files "BIL_DVEBMGS00_BILBO.PPR" and "START_DVEBMGS00_BILBO.PPR" from the EHPI directory D:\usr\sap\EHPI\abap\log\ i do find entries like
2 DIR_CT_RUN User: SAP: D:\usr\sap\BIL\SYS\exe\nuc\NTAMD64
and
2 OS_UNICODE User: SAP: nuc
But the question remains. Where does it take these ones from? The System profiles do not refer to "nuc" anywhere but always to "uc". -
EHP4 Installation error-CURRENTPHASE PREP_INPUT/SCANDIR_EXTRACT.
Hi Folks,
We are doing an EHP4 installation and stuck at the phase SCANDIR_EXTRACT.
Below is the log:
CURRENTPHASE PREP_INPUT/SCANDIR_EXTRACT
...started at 20100408034401
Using phase log file 'SCANDIRX.LOG'.
Error message set: 'Error message CPF0006 running 'LODSAPKRN DEV(STMF) MNTPNT(UPG '/ehp4/ehpi/abap/exenew') KRNLIB(SAPQAS70U2) APYR3KRN(NO) USERDEF(NO) ONESTEP(*NO) STATFILE('/ehp4/ehpi/abap/log/SAPQAS70U2.LOG')'.
...begin dialogue at 20100408034515
Please help me with the problem. Thanks in advace.
Regards,
BhavneshHi,
I think there is a issue with this on IBM i check the thread :
Upgrade from 470 to SAP ECC 6.0 Ehp4 Sr5 (non unicode)
Mark -
Error in start of phase PREP_INPUT/PROFREAD
Hi Team,
We are facing the follwing error while 'RESET PREPARE' and it is not accepting the DDIC and SAPServiceER4 password also...
>> 2009/09/29 18:31:04 START OF PHASE PREP_INPUT/PROFREAD
>>>> Passwords <<<<
Enter the password for SAP user DDIC in client 000:
DDIC PASSWORD [***********]: ***********
Enter the password for the operating system account .\SAPServiceER4:
OS PASSWORD [***********]: ***********
ERROR: DDIC password does not work: RFC call to failed with key RFC_E
NICATION (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM DEST=ER4, GWHOST=hydhtc100381d, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'hydhtc100381d:3300' not reached
TIME Tue Sep 29 18:31:38 200
RELEASE 710
COMPONENT NI (network interface)
VERSION 39
RC -10
MODULE nixxi.cpp
LINE 3143
DETAIL NiPConnect2: 10.136.175.23:3300
SYSTEM CALL connect
ERRNO 10060
ERRNO TEXT WSAETIMEDOUT: Connection timed o.
Please suggest the solution...
Also please let me know that for upgrading ECC 6.0 can we use EHP Installer version more than 7.0 ?
Waiting for your response...
VibhorHi Vibhor,
In resetting of upgrade you don't need DDIC user and sapservice<sid> password.
You can reset upgrade by using below command:
Change to the EHPI/abap/bin directory (Windows: EHPI\abap\bin)
Enter the following command:
./SAPehpi reset prepare (Windows: .\SAPehpi.exe reset prepare)
Delete the EHPI directory.
Start SAPehpi again.
Also, In order to upgrade ERP to EHP4 you cannot use EHPI of version higher than 7.0.
Thanks
Sunny -
Severe error(s) occured in phase PREP_INPUT/KX_CPYORG!
We are installing the EHP4 on a ERP 6.0 EHP4 ready ABAP system. ( MSCS
Installation)
We are using SAP EHP INSTALLER 7.00 .( latest version)
However , while in extraction phase we are getting following
error "evere error(s) occured in phase PREP_INPUT/KX_CPYORG!
Last error code set: Failed to copy 1 files, check 'KX_CPYORG.LOG' for
details"
We have checked that user SIDADM user has full rights over the
directory "
SAPGCP\sapmnt\GCP\SYS\exe\uc\NTAMD64"
Please advice where to look for errors and how to resolve them. Just an information i DID NOT stopped any services on both of nodes , as its an MSCS installation and i am running ehpi tool at server on which CI was installed and running the tool from CI /usr/sap/sid/ehpi directory.
There is no error in KX_CPYORG.log file .
2 ETQ399 Reading list file '
SAPGCP\sapmnt\GCP\SYS\exe\uc\NTAMD64\dbatoolsora.lst'
3 ETQ399 Copying file 'dbatoolsora.lst'.
3 ETQ399 Copying file 'dbatoolsora.mf'.
3 ETQ399 Copying file 'brarchive.exe'.
3 ETQ399 Copying file 'brbackup.exe'.
3 ETQ399 Copying file 'brconnect.exe'.
3 ETQ399 Copying file 'brrecover.exe'.
3 ETQ399 Copying file 'brrestore.exe'.
3 ETQ399 Copying file 'brspace.exe'.
3 ETQ399 Copying file 'brtools.exe'.
3 ETQ399 Copying file 'libsbt.dll'.
3 ETQ399 Copying file 'initSID.sap'.
3 ETQ399 Copying file 'sapconn_role.sql'.
3 ETQ399 Copying file 'sapdba_role.sql'.
3 ETQ399 Copying file 'ntenv2reg.exe'.
3 ETQ399 Copying file 'ARCHIVE_OFF.BAT'.
3 ETQ399 Copying file 'ARCHIVE_ON.BAT'.
3 ETQ399 Copying file 'ARCHIVE_TST.BAT'.
3 ETQ399 Copying file 'strdbs.cmd'.
3 ETQ399 Copying file 'CPIO.EXE'.
3 ETQ399 Copying file 'DD.EXE'.
3 ETQ399 Copying file 'MT.EXE'.
3 ETQ399 Copying file 'MKSZIP.EXE'.
3 ETQ399 Copying file 'UNCOMPRESS.EXE'.
1 ETQ399 Copied 915 files.
1EETQ399 Failed to copy 1 files.
Please advice
Regards
Edited by: Tech GCCIA on Oct 14, 2010 1:52 PMIn my case, it cannot overwrite some files, i could found it in the log.
See :
3EETQ399 Cannot write to '/usr/sap/TDD/SUM/abap/exe/libicudata50.a': Text file busy
3 ETQ399 Copying file 'libicui18n40.a'.
3 ETQ399 Copying file 'libicui18n50.a'.
3EETQ399 Cannot write to '/usr/sap/TDD/SUM/abap/exe/libicui18n50.a': Text file busy
3 ETQ399 Copying file 'libicuuc40.a'.
3 ETQ399 Copying file 'libicuuc50.a'.
3EETQ399 Cannot write to '/usr/sap/TDD/SUM/abap/exe/libicuuc50.a': Text file busy
I've just renamed these files for _bkp and runned again.
It works!
Thanks and I hope help you !!!
regards,
Eddie -
Severe error(s) occurred in phase PREP_INPUT/SUMCHK!
Hi ,
while performing the EHP7 upgrade during the extraction phase I faced below error.
Severe error(s) occurred in phase PREP_INPUT/SUMCHK!
Last error code set: tp failed with return code 232, check G:\SUM\abap\log\TPSQLSTD.OUT
I have tried implementing the below parameter disp+work is stopped
Env variable rsdb_ssfs_connect = 1
rsdb/ssfs_connect = 0
I have attached the TPSQLSTD log file below,Kindly share your inputs to fix above error.Hi Krishan,
Have a close look with logs
SAPup> Starting subprocess in phase 'SUMCHK' at 20140727092403
ENV: DBMS_TYPE=ora
ENV: NLS_LANG=AMERICAN_AMERICA.UTF8
ENV: ORACLE_HOME=C:\oracle\QEC\11203
ENV: ORACLE_SID=QEC
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\usr\sap\QEC\DVEBMGS00\exe;C:\oracle\QEC\11203\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;D:\usr\sap\QEC\SYS\exe\uc\NTAMD64
ENV: SAPDATA_HOME=F:\ORACLE\QEC
ENV: SAPSYSTEMNAME=QEC
ENV: dbs_ora_schema=SAPSR3
ENV: dbs_ora_tnsname=QEC
ENV: rsdb_ssfs_connect=1
EXECUTING D:\usr\sap\QEC\DVEBMGS00\exe\tp.EXE "pf=J:\SUM\abap\var\DEFAULT.TPP" execdbscript QEC -x ..\var\SMODILOGCHECK.XQL
This is D:\usr\sap\QEC\DVEBMGS00\exe\tp.EXE version 380.04.07 (release 720, unicode enabled)
TRACE-INFO: 1: [ dev trc,00000] Sun Jul 27 09:24:03 2014 2967 0.002967
TRACE-INFO: 2: [ dev trc,00000] DlLoadLib success: LoadLibrary("dboraslib.dll"), hdl 0, addr 000007FEE71F0000
TRACE-INFO: 3: 19 0.002986
TRACE-INFO: 4: [ dev trc,00000] using "D:\usr\sap\QEC\DVEBMGS00\exe\dboraslib.dll" 8 0.002994
TRACE-INFO: 5: [ dev trc,00000] -->DbSlControl(con=-1,cmd=47=DBSL_CMD_IMP_FUNS_SET) -> changed=30, tagset=1 350 0.003344
TRACE-INFO: 6: [ dev trc,00000] -->DbSlControl(con=-1,cmd=39=DBSL_CMD_SET_SINGLETASK) 13 0.003357
TRACE-INFO: 7: [ dev trc,00000] -->DbSlControl(con=-1,cmd=10=DBSL_CMD_DBCA_PTR_GET) 11 0.003368
TRACE-INFO: 8: [ dev trc,00000] -->DbSlControl(con=-1,cmd=10=DBSL_CMD_DBCA_PTR_GET) 12 0.003380
TRACE-INFO: 9: [ dev trc,00000] -->DbSlControl(con=-1,cmd=74=DBSL_CMD_CON_INFO_EXT_SUPPORT) -> rc=0=DBSL_ERR_OK, con_vers=0
TRACE-INFO: 10: 36 0.003416
As you are using kernel release 720.Parameter rsdb_ssfs_connect =1 will play role if you'll use kernel release higher than current.For use of SSFS try to upgrade kernel with the latest 740 or 741 and retry the phase again.
Regards,
Gaurav -
Error occurred in phase PREP_INPUT/EXTRACTKRN_PRE
Hi All,
I am upgrading Solution Manager to 7.1 from solution Manager 7.0 EHP1. Operating system Windows Server 2003 and database Oracle 11.2.
During the extraction phase (Extract Kernel) the following error occurred :
Sever error(s) occurred in phase PREP_INPUT/EXTRACTKRN_PRE!
Last error code set:Attribute 'nargs' not found in tag 'media'
I have checked the SAP_up_troubleticket.log file and found the same errors as mentioned above.
SAPup broke during phase EXTRACTKRN_PRE in module PREP_INPUT
/ Parameter input
Error Message: Attribute 'nargs' not found in tag 'media'
If someone had encountered the same problem then found the fix, can you please share the same.
Thanks in advance .
HarryI truncated to short path but did not work. I will try again.
I tried to attached zip files but got same message again.
Regards,
Harry
The MIDService file is not a very big. Please find the contents of the file MISDservice.log files are given below.
May 14, 2014 4:29:10 PM [Info]: Starting service "MIDService" ...
May 14, 2014 4:29:10 PM [Info]: Starting service "MIDService" ...
May 14, 2014 4:29:10 PM [Info]: Reading scope from storage.
May 14, 2014 4:29:10 PM [Info]: No scope in storage - creating initial scope.
May 14, 2014 4:29:10 PM [Info]: Service "MIDService" started.
May 14, 2014 4:29:10 PM [Info]: Service "MIDService" started.
May 14, 2014 4:29:10 PM [Info]: Setting Kit ID to <null>
May 14, 2014 5:02:59 PM [Info]: Attaching "D:\SOLMAN71\51042608" ...
May 14, 2014 5:02:59 PM [Info]: Attached "D:\SOLMAN71\51042608"" with ID 88d5b6c2-4b5b-11e1-a27e-005056a204ff.
May 14, 2014 5:02:59 PM [Info]: Updating storage ...
May 14, 2014 5:02:59 PM [Info]: Storage updated.
May 14, 2014 5:02:59 PM [Info]: Attaching "D:\SOLMAN71\51042609" ...
May 14, 2014 5:02:59 PM [Info]: Attached "D:\SOLMAN71\51042609"" with ID 0c59c310-5e1c-11e1-b8b0-005056a204ff.
May 14, 2014 5:02:59 PM [Warning]: inconsistent logical item
May 14, 2014 5:02:59 PM [Info]: Updating storage ...
May 14, 2014 5:02:59 PM [Info]: Storage updated.
May 14, 2014 5:02:59 PM [Info]: Attaching "D:\SOLMAN71\51042610_1" ...
May 14, 2014 5:02:59 PM [Info]: Attached "D:\SOLMAN71\51042610_1"" with ID c1d91112-4cdc-11e1-ca6c-005056a204ff.
May 14, 2014 5:02:59 PM [Warning]: inconsistent logical item
May 14, 2014 5:02:59 PM [Warning]: inconsistent logical item
May 14, 2014 5:02:59 PM [Info]: Updating storage ...
May 14, 2014 5:02:59 PM [Info]: Storage updated.
May 14, 2014 5:02:59 PM [Info]: Attaching "D:\SOLMAN71\51042610_2" ...
May 14, 2014 5:03:00 PM [Info]: Attached "D:\SOLMAN71\51042610_2"" with ID c1d91114-4cdc-11e1-98be-005056a204ff.
May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
May 14, 2014 5:03:00 PM [Info]: Updating storage ...
May 14, 2014 5:03:00 PM [Info]: Storage updated.
May 14, 2014 5:03:00 PM [Info]: Attaching "D:\SOLMAN71\51042610_3" ...
May 14, 2014 5:03:00 PM [Info]: Attached "D:\SOLMAN71\51042610_3"" with ID c1d91116-4cdc-11e1-a11e-005056a204ff.
May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
May 14, 2014 5:03:00 PM [Info]: Updating storage ...
May 14, 2014 5:03:00 PM [Info]: Storage updated.
May 14, 2014 5:03:00 PM [Info]: Attaching "D:\SOLMAN71\SOLMAN_7_1_SR1_Krnl_Windows__OS_400_" ...
May 14, 2014 5:03:00 PM [Info]: Attached "D:\SOLMAN71\SOLMAN_7_1_SR1_Krnl_Windows__OS_400_"" with ID 7598c6a0-53b8-11e1-831b-005056a204ff.
May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
May 14, 2014 5:03:00 PM [Warning]: inconsistent logical item
May 14, 2014 5:03:00 PM [Info]: Updating storage ...
May 14, 2014 5:03:00 PM [Info]: Storage updated.
May 14, 2014 5:24:14 PM [Info]: Locating Data Unit with Kit ID d52484b0-0548-11e1-a98b-005056a204ff ...
May 14, 2014 5:24:14 PM [Info]: Attributes:
May 14, 2014 5:24:14 PM [Info]: osname=WINDOWS_X86_64
May 14, 2014 5:24:14 PM [Info]: unicode=true
May 14, 2014 5:24:14 PM [Info]: type=KERNEL
May 14, 2014 5:24:14 PM [Info]: Matching item ID d29f9450-15ab-11e1-8d45-005056a204ff
May 14, 2014 5:24:14 PM [Info]: Data Unit located under path D:\SOLMAN71\SOLMAN_7_1_SR1_Krnl_Windows__OS_400_\.\DATA_UNITS\K_720_U_WINDOWS_X86_64. -
EHP6 - Severe error(s) occurred in phase PREP_INPUT/KX_CPYORG!
Hi All,
We are at the "extraction" stage of our EHP6 upgrade for pre-prod system, this serves as rehearsal for the execution of the same upgrade in production system.
However, SUM is stopped due to below error.
SUM - EXTRACTION phase stops at PREP_INPUT/KX_CPYORG, showing the error message below:
Severe error occurred in phase PREP_INPUT/KX_CPYORG!
Last error code set is: Failed to copy 1 files, check 'KX_CPYORG.LOG' for details
And checking from log, it shows "4EETQ399 Source file 'exe_syb.lst' missing!". This file doesn't exist anywhere in the system. Also, checking from logs of previous EHP6 upgrade in our DEV and QAS systems, this file doesn't exist. And instead of "exe_syb.lst", what has been copied from previous upgrades is 'exe_db6.lst'. We are at HP-UX and DB6.
Logs:
4EETQ399 Source file 'exe_syb.lst' missing!
1 ETQ399 Copied 821 files.
1EETQ399 Last error code set is: Failed to copy 1 files, check 'KX_CPYORG.LOG' for details
1EETQ204 Upgrade phase "KX_CPYORG" aborted with severe errors ("20140721180154")
Please advise how to fix.
Regards,
PhilipHI,
Kindly share 'KX_CPYORG.LOG files for analysis.Meanwhile try to patch the kernel with latest available at SMP and recheck for permissions and ownerships under kernel directory.
Regards,
Gaurav -
Error during the PREP_INPUT/KX_CPYORG in the EXTRACTION roadmap step
Dear Gurus,
We are on SUSELinux 10 SP2
Oracle 10.4 and
I am in the process of applying EhP4 on top of my ECC 6.0 SR3 server and i m in the Extraction roadmap step and at a phase PREP_INPUT/KX_CPYORG which gives me the following error
Severe error(s) occured in phase PREP_INPUT/KX_CPYORG! on my SAPEhPGUi screen and no log gives a clear explaination of this error, i have checked the log KX_CPYORG.LOG and it is as below
======================================================================================================
2 ETQ399 Reading list file '/usr/sap/KDV/SYS/exe/run/dbatoolsora.lst'
3 ETQ399 Copying file 'dbatoolsora.lst'.
3 ETQ399 Copying file 'brarchive'.
3 ETQ399 Copying file 'brbackup'.
3 ETQ399 Copying file 'brconnect'.
3 ETQ399 Copying file 'brrecover'.
3 ETQ399 Copying file 'brrestore'.
3 ETQ399 Copying file 'brspace'.
3 ETQ399 Copying file 'brtools'.
3 ETQ399 Copying file 'initSID.sap'.
3 ETQ399 Copying file 'sapconn_role.sql'.
3 ETQ399 Copying file 'sapdba_role.sql'.
3 ETQ399 Copying file 'libsbt.so'.
1 ETQ399 Copied 784 files.
1 ETQ399 Failed to copy 1 files.
But doesnt say which file..
======================================================================================================
Apart from that i have also checked the log file SAPehpichk.log, which is as below
CURRENTPHASE PREP_INPUT/KX_CPYORG
...started at 20091004010834
Using phase log file 'KX_CPYORG.LOG'.
Kernel is replicated from /usr/sap/KDV/SYS/exe/run.
...begin dialogue at 20091004010846
======================================================================================================
i have also checked the files and the size of the /usr/sap/KDV/SYS/exe and /ehp4/EhPInstaller/EHPI/abap/exe folders and they look alike and no size difference among them.
Can anyone please help me come out of this situation.
I have re-run the Phase (repeated) many a times with no luck.
Awaiting any inputs on the same,
Million thanks in advance,
BasoDear All,
The issue is resolved and i did the following
1) Cancelled the Ehp4 installation
2) Deleted EHPI directory
3) Downloaded latest EhPI (which is released on 1 Oct)
4) Restarted the EhP4 installation
5) Changed the icmbnd file permissions in the source directory to 777 and owner to SIDadm
6) Copied it manually with the same permissions into the target exe directory (ehp4/EHPI/abap/exe)
7) After the phase reset the file permissions back to original in the source directory (/usr/sap/SID/SYS/exe/run)
Only one good suggestion is download the latest EhP installer
Hope this helps
Thanks to all
Regards
Hunky -
Error in phase XPRAS_AIMMRG for Upgrade from 4.7 to ERP6 ehp5 sps5
Hi All,
We are in process in upgrading our sandbox system from 4.7 to ERP6.0
EHP5 SPS5.
During the downtime step we are facing an error in phase XPRAS_AIMMRG
Upon investigation we found that there are short dumps in the system
due to this error.
Below is the extract of the short dumps generated by the job RDDEXECL
Category Internal Kernel Error
Runtime Errors DDIC_TYPE_INCONSISTENCY
Application Component BC-ABA-LA
Date and Time 05.12.2011 08:58:48
Short text
Inconsistency in the dictionary for the structure "KOMG".
What happened?
Error in the SAP kernel.
The current ABAP "SAPLF82V" program had to be terminated because
the
ABAP processor detected an internal system error.
Also, We I try to check the Table KOMG in SE11 is get the below messages.
Check table KOMG (DDIC/05.12.11/10:00)
Append structure OILKOMG appended to table KOMG
Append structure OIUKOMG appended to table KOMG
No customer or SAP include SI_KOMK_CM exists
No customer or SAP include SI_KOMP_CM exists
No customer or SAP include CI_PRS_CPILS_2 exists
Enhancement category 3 possible, but include or subty. not
yet classified
Field LGORT in table KOMG is specified twice. Please check
KOMG-ZZMVGR4: Table TVM1T in search help attachment differs
from table of search field
Check on table KOMG resulted in errors
Has anyone received the below message in XPRAS phase during the upggrade.
Any suggestion would be most welcome.
Regards,
Nilesh JagtapDear Nilesh,
The reason for this issue is that the component 'LGORT' is indeed specified twice in structure KOMG on your system.
It might be definied in the standard include as well as in your customer include.
Please bear in mind, that if you append customer own structures to SAP standad structures, that the component names should start with 'Z' or even better 'ZZ'.
That prevents the case which might have happened here, that the field you have added on customer side has also been delivered as part of an SAP standard include.
So you should change your structure accordingly.
Note 531835 describes how to add an own field to such structures. It might also be helpful for you.
After you have repaired your structure you can activate the structure KOMG and the issue should be solved.
Best Regards,
Abhishek -
Error in phase: ADD_TO_BUFFER in SPAM during import of SAPKB70017 and 18
Hello
What is problem in this case? During import of SAPKB70017 and SAPKB70018 I get following error(there is no SLOG file in /usr/sap/trans/log):
The import was stopped, since an error occurred during the phase
ADD_TO_BUFFER, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: ADD_TO_BUFFER
- Reason for error:
- Return code: 0211
- Error message:
Notes on phase ADD_TO_BUFFER
In this phase the queue is placed in the transport buffer of your
system. This phases can terminate due to the following reasons:
o TP_INTERFACE_FAILURE: The tp interface could not be called. There is
an RFC error.
o CANNOT_ADD_PATCH_TO_BUFFER: A Support Package could not be included
in the transport buffer. The program tp is trying to open a file in
the file system. For more information, refer to the SLOG log file in
the directory /usr/sap/trans/log.
A prerequisite of the Support Package Manager is that the Change and
Transport System (CTS) is configured correctly. For more detailed
information, read the online documentation available from Help -> SAP
Library -> mySAP Technology Components -> SAP Web Application Server ->
Change and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.Hi Jan,
First, check whether your STMS is configured properly. Next check the transport directory and the transport tool from within STMS (system -> check in menu options).
If these 2 are ok, then you might check from within the OS layer by manually adding to buffer (tp add to buffer <Request No> <SID>).
Also, I am assuming you are doing this from client 000 with a non-standard user having proper authorizations.
I believe this to be an issue of permissions at the OS layer.
Regards
Siva -
Error in PHASE ACT_UPG: Upgrade SAP R/3 4.7 to SAP ECC 6.0 EHP
Hello,
I'm facing an error in phase MAIN_SHDRUN/ACT_UPG (see errors below).
After searching for the errors I found postings with advice to change R3trans and tp to the newest version. Strangely system did not take the newest kernelpatch I stored in upgrade folder. So I changed the files in the /usr/sap/SID/abap/exe folder and repeated the phase.
But the error is still there.
A solution was to reset the queue, but this is only possible with help by sap.
Error in phase: DDIC_ACTIVATION
So I'm waiting for their reaction since two days, but nothing happens.
My questions are now:
what happens if I use the option "initialize phase ACT_UPG to restart it from beginning"? Will the new R3trans be used? Have we got to to the SPDD again?
What happens if I use the option "accept non severe errors and repeat phase ACT_UPG? Are these language errors "non-severe"?
Errors:
In error log ACTUPG.ELG I find logs like:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60016INERECRUIT.REX
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "8"
In error log SAPup.ECO I find:
EXECUTING /usr/sap/REX/upg/abap/exe/tp (/usr/sap/REX/upg/abap/exe/tp) pf=/usr/sap/REX/upg/abap/bin/ACTUPG.TPP put REX
This is /usr/sap/REX/upg/abap/exe/tp version 376.01.14 (release 701)
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Looking for effective putsteps ... ... ready (looking for putsteps)
tp finished with return code: 8
meaning:
A tool used by tp produced errors
Process with ID 13163 terminated with status 8
In the last touched SP-File SAPAAAA701.SID I can find errors like:
"1EEDO545 "LANG" "DTEL" "*": Object information could not be imported"
Regards,
JuliaAfter pushing the message at SAP I got the following answer:
It is the problem from note 1417505. There is no guarantee that all objects where imported with the used R3trans. A rerun of phase will be unsuccessfully because error came up in DDIC_IMPORT.
A reset of the queue is only possible if SPAM/SAINT is used for importing support packages. In case of upgrade, like here, the upgrade has got to be resetted as described in upgrade guide.
After start between phase extraction and configuration the newest R3trans has got to be copied manually in /abap/exe folder.
Regards,
Julia -
Hello all,
Using SUM while running SCM 7.0 EHP3 upgrade I am getting error in phase MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC:
Checks after phase MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC were negative!
Last error code set: Single errors (code > 8) found in logfile 'MVNTFDC.ELG'<br/> 1 tp processes returned errors. View latest 'TP*.ECO' files in log-directory for details
ERROR: Detected the following errors:
# D:\SUM\abap\log\PD000203.SCD:
3 ETP000 NOT NULL )
3 ETP000 ON [/BIC/FZT_DEL_C1_PSCH000]
3 ETP000 WITH ( DATA_COMPRESSION = PAGE )
3 ETP000
2WETP000 11:10:14: Retcode 1: error in DDL statement for "/1CRR/TG00003781 " - repeat
2EETP345 11:10:26: Retcode 1: SQL-error "2726-Partition function '/BIC/FZT_DEL_C1_PFUN000' uses 1 c
2EETP345 olumns which does not match with the number of partition columns used to partition the tab
2EETP345 le or index." in DDL statement for "/1CRR/TG00003781 "
2 ETP000 --------------- DB-ROLLBACK() ---------------
2EETP334 11:10:26: error in DDL, nametab for "/1CRR/TG00003781" not activated
3 ETP000 NOT NULL )
3 ETP000 ON [/BIC/FZT_DEL_C2_PSCH000]
3 ETP000 WITH ( DATA_COMPRESSION = PAGE )
...skipped 18 more lines. Please see MVNTFDC.html for more information.
I checked some other log files:
MVNTFDC
1 ETQ201 Entering upgrade-phase "MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC" ("20150203110951")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00' Client = '000'
1 ETQ206 Executing pre-phase DB specific actions.
1 ETQ200 Executing actual phase 'MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'TP_MOVENTABS_SHD'
2 ETQ399 Arg[1] = 'INTDEL;INTACT;NOBUFFRESET;SHADOW_ONLY'
2 ETQ399 Arg[2] = 'MF=F,STEP=T,RANGE-TS'
2 ETQ399 Arg[3] = 'MVNTFDC.TP0'
1 ETQ399 Using error summary log 'MVNTFDC.ELG'.
1 ETQ399 Using 8 parallel processes
2 ETQ399 Empty putsteps - configuring at least parallel batches and main import processes.
2 ETQ399 Distribute 8 parallel processes to 2 tp and 4 R3trans.
4 ETQ380 computing toolpath for request "TP_MOVENTABS_SHD"
4 ETQ381 request "TP_MOVENTABS_SHD" means "tp mvntabs for shadow tables"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_SHD"
4 ETQ399 Requirement for tp maps to 'exe'
4 ETQ383 translates to path "D:\SUM\abap\exe"
2 ETQ399 Starting 8 tp processes:
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 7444 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP00.ECO'.
2 ETQ399 Started tp ddlntabs with pid 7444
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 4888 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=01" "seltsize=1" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP01.ECO'.
2 ETQ399 Started tp ddlntabs with pid 4888
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 9100 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=02" "seltsize=2" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP02.ECO'.
2 ETQ399 Started tp ddlntabs with pid 9100
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 736 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=03" "seltsize=3" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP03.ECO'.
2 ETQ399 Started tp ddlntabs with pid 736
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 8864 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=04" "seltsize=4" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP04.ECO'.
2 ETQ399 Started tp ddlntabs with pid 8864
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 9264 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=05" "seltsize=5" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP05.ECO'.
2 ETQ399 Started tp ddlntabs with pid 9264
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 9732 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=06" "seltsize=6" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP06.ECO'.
2 ETQ399 Started tp ddlntabs with pid 9732
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 11492 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=07" "seltsize=7" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP07.ECO'.
2 ETQ399 Started tp ddlntabs with pid 11492
3 ETQ123 20150203110954: PID 9264 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110954: PID 7444 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110954: PID 4888 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110954: PID 736 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110954: PID 9732 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110956: PID 11492 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110956: PID 9100 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110956: PID 8864 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
2 ETQ399 Looking for pattern 'PD00....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD000203.SCD'.
1 ETQ124 Scanned file 'log\PD000203.SCD' from offset 9525 to 12695 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD00....\.SCD'
2 ETQ399 Looking for pattern 'PD01....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD010203.SCD'.
1 ETQ124 Scanned file 'log\PD010203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD01....\.SCD'
2 ETQ399 Looking for pattern 'PD02....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD020203.SCD'.
1 ETQ124 Scanned file 'log\PD020203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD02....\.SCD'
2 ETQ399 Looking for pattern 'PD03....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD030203.SCD'.
1 ETQ124 Scanned file 'log\PD030203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD03....\.SCD'
2 ETQ399 Looking for pattern 'PD04....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD040203.SCD'.
1 ETQ124 Scanned file 'log\PD040203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD04....\.SCD'
2 ETQ399 Looking for pattern 'PD05....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD050203.SCD'.
1 ETQ124 Scanned file 'log\PD050203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD05....\.SCD'
2 ETQ399 Looking for pattern 'PD06....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD060203.SCD'.
1 ETQ124 Scanned file 'log\PD060203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD06....\.SCD'
2 ETQ399 Looking for pattern 'PD07....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD070203.SCD'.
1 ETQ124 Scanned file 'log\PD070203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD07....\.SCD'
2 ETQ399 Starting 1 tp processes:
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203111013: PID 8692 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP00.ECO'.
2 ETQ399 Started tp ddlntabs with pid 8692
3 ETQ123 20150203111050: PID 8692 exited with status 8 (time 0.000 real)
2EETQ399 tp ddlntabs failed with exit code 8.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD00....\.SCD'
1 ETQ124 Scanned file 'log\PD000203.SCD' from offset 12805 to 18826 for errors.
4 ETQ399 html file conversion from 'D:\SUM\abap\log\MVNTFDC.ELG' to 'MVNTFDC.html' succeeded.
4 ETQ010 Date & Time: 20150203111051
1EETQ399 Last error code set is: Single errors (code > 8) found in logfile 'MVNTFDC.ELG'
1 tp processes returned errors. View latest 'TP*.ECO' files in log-directory for details
1EETQ203 Upgrade phase "PARMVNT_FDC" aborted with errors ("20150203111051")
TP00.ECO
SAPup> Starting subprocess in phase 'TP_ACTION_CP2SINI' at 20150202112054
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\CP2SHDI.TPP" r3e SAPKBBF740 -s SCD u18
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
This is D:\SUM\abap\exe\R3trans.exe version 6.24 (release 741 - 11.08.14 - 17:21:00).
unicode enabled version
D:\SUM\abap\exe\R3trans.exe finished (0004).
INFO: No client specified on command line. Taking client 0 from E070C.
tp finished with return code: 4
meaning:
A tool used by tp produced warnings
SAPup> Process with PID 7592 terminated with status 4 at 20150202112055!
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150202213004
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 0
meaning:
Everything OK
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150202213118
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 8
meaning:
A tool used by tp produced errors
SAPup> Process with PID 5336 terminated with status 8 at 20150202213638!
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203102328
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 0
meaning:
Everything OK
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203102350
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 8
meaning:
A tool used by tp produced errors
SAPup> Process with PID 10396 terminated with status 8 at 20150203102427!
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203110952
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 0
meaning:
Everything OK
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203111013
ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
ENV: SAPSYSTEMNAME=SCD
ENV: dbms_type=mss
ENV: dbs_mss_schema=scd
PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 8
meaning:
A tool used by tp produced errors
SAPup> Process with PID 8692 terminated with status 8 at 20150203111050!
Can someone please help ?Hi Pankaj,
did you get any solution for this issue ? I am also facing the same error in my BW upgrade to EHP3.
Please share the solution if you get any.
Regards,
Maybe you are looking for
-
Sharing objects across Tabs of a JTabbedPane
I don't know whether this is an Object-Oriented design question or a JTabbedPane question. I'm pretty new to Java, so be patient! I wish to have a JTabbedPane with a tab to do 'Import' of data, and a tab to do 'Export' of data (the SAME data which wa
-
hi! I'm a beginner to jsp, and want to do the following: - Pass 2 input parameters (name and city) from test.jsp to test.java using <jsp:setproperty ....> - Use <jsp:getproperty ....>, and get the values (name and city) from test.java Here's test.jsp
-
Default Payscale group and level
Hi Experts, Is there any way by which i can default the Payscale Group and Payscale Level? My payscale group is same as Employee Group and level is same as Employee Sub-group. Plz advice. regards TS
-
Displaying currency lable in forms
Is there a way to display the currency in a form that has been attached to an entity via metadata? There is a new function in FR to do this but curious to understand how others have done it in forms.
-
Hirarchical Queries in Berkeley DB
we are migrating an application from oracle Lite to Berkeley. Application in oracle Lite uses Hierarchical queries (Connect by prior) but seems that Berkeley DB's SQL APIs do not provide any support for Hierarchical queries. So what is its alternate