Error in Photo upload.. pls help
Hello All,
I have uploaded a new photo for am employee, but it is not shown after uploading in R/3
Kindly help...
Thanks,
Nithi
In order to store pictures with archive link you need to customize
objecttype/documenttype -> contrep ID in OAC3 and you need to
customize the contrep in OAC0.
If you don't have an archive system and want to archive images
you need to install the SAP content server. The content server
is delivered with Rel. 46C and you can install the content server
in OAC0 (see documentation).
Also, for using an employee picture in the PA20/PA30 please check that
you have a correct customization for the infotype header.
For further information please have a look at the corresponding
point in the customizing for 'Personnel Administration' - 'Define
Dynpro header'.
You have to check the table T588J and T77S0 (define document type for
pictures). Addiotionally, remember that the photo should be in JPG
format.
Also please go through the note 595563, It should be helpful.
Referred links:
https://wiki.sdn.sap.com/wiki/display/ERPHCM/EmployeePhotoUpload
https://forums.sdn.sap.com/click.jspa?searchID=9983719&messageID=4945950
Cheers
Márcio Leoni
Similar Messages
-
While creating PO currency is given as EUR error is as follows- pls help
while creating PO currency is EUR & error comes as "Enter Rate EUR/INR Rate Type M for 19.01.2011 in the system settings.
Pls Help.Hi Hmal,
When you are trying to create PO with other than the company code currency system is looking for the equivalent exchange to the company code currency to the given foreign currency.
Before using any curreny we have to maintain the exchange rates in OB08 with the duration then system will take care of further postings
Regards,
Srini Rao -
Error message when uploading - need help to fix
I am getting this error message when uploading to ftp host:
Error:
Error uploading file master_a-master.css. Click Resume to try again. If this problem persists, try again later.
[421 Idle timeout (600 seconds): closing control connection]
how do I fix this?? have already tried to resume,,, tried from scratch. closed program and opened again. does this each time.Make sure you're doing everything recommended by BlackBerry:
www.blackberry.com/btsc/KB34045
If you're hitting reload and it isn't reloading the OS for you, perhaps try reloading a backup file you've created (hopefully you've done some backups).
Keep us up to date on your progress.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated. -
Error while using utl_smtp,pls help
CREATE OR REPLACE PROCEDURE send_mail (p_sender IN VARCHAR2,
p_recipient IN VARCHAR2,
p_message IN VARCHAR2)
as
l_mailhost VARCHAR2(255) := '10.16.56.30';
l_mail_conn utl_smtp.connection;
BEGIN
l_mail_conn := utl_smtp.open_connection(l_mailhost, 25);
utl_smtp.helo(l_mail_conn, l_mailhost);
utl_smtp.mail(l_mail_conn, p_sender);
utl_smtp.rcpt(l_mail_conn, p_recipient);
utl_smtp.open_data(l_mail_conn );
utl_smtp.write_data(l_mail_conn, p_message);
utl_smtp.close_data(l_mail_conn );
utl_smtp.quit(l_mail_conn);
end;
i create dthe above and when i am running it i am getting the following error
SQL> execute send_mail('[email protected]','[email protected]','hi');
BEGIN send_mail('[email protected]','[email protected]','hi'); END;
ERROR at line 1:
ORA-29278: SMTP transient error: 450 4.7.1 [email protected]..
Relaying temporarily denied. Cannot resolve PTR record for 10.16.56.20
ORA-06512: at "SYS.UTL_SMTP", line 17
ORA-06512: at "SYS.UTL_SMTP", line 96
ORA-06512: at "SYS.UTL_SMTP", line 240
ORA-06512: at "TTK05.SEND_MAIL", line 11
ORA-06512: at line 1
pls help me , i need to send a mail from the above
regHi,
try to use the host-name instead of the IP and check your dns configuration (Cannot resolve PTR record for 10.16.56.20).
(Relaying temporarily denied) -> Some mail-servers are configured to accept only messages for their domain, e.g. mailserver mail.dummy.com only accepts messages to account with name like [email protected] -
Getting error in sockt programming pls help
i got these 4 warning while i compile my first socket program in windows VC++..
anyone plz helpp me...
Compiling...
server.c
c:\windows\desktop\prasad\socket\server.c(28) : warning C4013: 'bzero' undefined; assuming extern returning int
c:\windows\desktop\prasad\socket\server.c(44) : warning C4013: 'read' undefined; assuming extern returning int
c:\windows\desktop\prasad\socket\server.c(47) : warning C4013: 'write' undefined; assuming extern returning int
c:\windows\desktop\prasad\socket\server.c(32) : warning C4761: integral size mismatch in argument; conversion supplied
server.obj - 0 error(s), 4 warning(s)i have two program server and client..first i compile this server.c file only....
pls help n im jus a bigner
this is the "server.c"
#include <stdio.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <sys/in.h>
void error(char *msg)
perror(msg);
exit(1);
int main(int argc, char *argv[])
int sockfd, newsockfd, portno, clilen;
char buffer[256];
struct sockaddr_in serv_addr, cli_addr;
int n;
if (argc < 2) {
fprintf(stderr,"ERROR, no port provided\n");
exit(1);
sockfd = socket(AF_INET, SOCK_STREAM, 0);
if (sockfd < 0)
error("ERROR opening socket");
bzero((char *) &serv_addr, sizeof(serv_addr));
portno = atoi(argv[1]);
serv_addr.sin_family = AF_INET;
serv_addr.sin_addr.s_addr = INADDR_ANY;
serv_addr.sin_port = htons(portno);
if (bind(sockfd, (struct sockaddr *) &serv_addr,
sizeof(serv_addr)) < 0)
error("ERROR on binding");
listen(sockfd,5);
clilen = sizeof(cli_addr);
newsockfd = accept(sockfd,
(struct sockaddr *) &cli_addr,
&clilen);
if (newsockfd < 0)
error("ERROR on accept");
bzero(buffer,256);
n = read(newsockfd,buffer,255);
if (n < 0) error("ERROR reading from socket");
printf("Here is the message: %s\n",buffer);
n = write(newsockfd,"I got your message",18);
if (n < 0) error("ERROR writing to socket");
return 0;
} -
Error!Urgent!Pls Help.....Thank You
I had the following error with the code below.......anyone pls help me ..... urgent.....I will be really appreciate it......Thank you in advanced.....
I had created two statement,.....one is to select the value of Leave_Reason from a table and store it in the String Leave_Reason after that I need to insert the Leave_Reason variable's value together with other value which input from a form in the previous page....into another table....
But I dun know why I encountered the error below....anyone pls help.....really urgent.....I had tried to solve it for two days already,,,,,
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 86 in the jsp file: /SilkAir/leave_request.jsp
Generated servlet error:
[javac] Compiling 1 source file
C:\Tomcat 4.1\work\Standalone\localhost\_\SilkAir\leave_request_jsp.java:315: cannot resolve symbol
symbol : variable Leave_Reason
location: class org.apache.jsp.leave_request_jsp
String Query = "INSERT INTO Leave_Application (Emp_Num, Leave_ID, Apply_Date, Leave_Date, Leave_Reason, Leave_Applied, Leave_Status) VALUES ('" + Emp_Num + "', '" + Leave_ID + "', '" Apply_Date "', '" + Leave_Date + "', '" + Leave_Reason + "', '" + Day + "', 'Pending')";
^
1 error
at org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:130)
at org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:293)
at org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:340)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:352)
at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:474)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:184)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:260)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2415)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:432)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:386)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:534)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:530)
at java.lang.Thread.run(Thread.java:536)
<request.jsp>
<%@page import="java.sql.*"%>
<%@page import="java.util.Date"%>
<%@page import="java.text.SimpleDateFormat"%>
<html>
<head>
<title></title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<%
String username = (String)session.getAttribute("username");
%>
<%
//define connection
Connection con = null;
try{
//get the class
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
//get the connection
con = DriverManager.getConnection("jdbc:odbc:Database","","");
//please catch your exceptions!
catch(Exception e){
out.println(e.getMessage());
// form data
String Emp= request.getParameter("txtEmp");
String Leave_ID = request.getParameter("txtReason");
java.text.SimpleDateFormat sdf = new java.text.SimpleDateFormat("yyyy/MM/dd");
String LeaveDate = request.getParameter("txtLeaveDate");
java.util.Date dateU = sdf.parse(LeaveDate);
java.sql.Date Leave_Date = new java.sql.Date(dateU.getTime());
String Day = request.getParameter("txtDay");
java.text.SimpleDateFormat rd = new java.text.SimpleDateFormat("yyyy/MM/dd");
String ApplyDate = request.getParameter("txtApplyDate");
java.util.Date dateR = rd.parse(ApplyDate);
java.sql.Date Apply_Date = new java.sql.Date(dateR.getTime());
// query statement
ResultSet rs=null;
Statement SQLStatement = con.createStatement();
Statement stm = con.createStatement();
String query = "SELECT DISTINCT LeaveType FROM Leave WHERE Leave_ID ='"+Leave_ID+"'";
rs = stm.executeQuery(query);
if(rs.next())
String Leave_Reason = rs.getString("LeaveType");
else
{ out.println("no results found");
rs.close();
stm.close();
String Query = "INSERT INTO Application (Emp, Leave_ID, Apply_Date, Leave_Date, Leave_Reason, Leave_Applied, Leave_Status) VALUES ('" + Emp_Num + "', '" + Leave_ID + "', '" Apply_Date "', '" + Leave_Date + "', '" + Leave_Reason + "', '" + Day + "', 'Pending')";
// get result code
int SQLStatus = SQLStatement.executeUpdate(Query);
if(SQLStatus != 0)
out.println("post successfully.");
else
out.println("Problem encountered");
// close connection
SQLStatement.close();
con.close();
%>
</body>
</html>if(rs.next())
String Leave_Reason = rs.getString("LeaveType");
else
{ out.println("no results found");
rs.close();
stm.close();
String Query = "INSERT INTO Application (Emp, Leave_ID, Apply_Date, Leave_Date, Leave_Reason, Leave_Applied, Leave_Status) VALUES ('" + Emp_Num + "', '" + Leave_ID + "', '" Apply_Date "', '" + Leave_Date + "', '" + Leave_Reason + "', '" + Day + "', 'Pending')";
The Problem is that the variable Leave_Reason is declared as a local variable inside a if block. So the scope of the variable is not visible outside the if block...
Try using something like
String Leave_Reason = "";
if(rs.next())
Leave_Reason = rs.getString("LeaveType");
else
{ out.println("no results found");
This should work...
Hope it helps.
Thanks and regards,
Pazhanikanthan. P -
HTTP error: 401 unauthorized -error in photo upload
Hi
Please suggest in OAAD,how to rectify the error ' HTTP error: 401 unauthorized ' during Photo upload in IT0002.
Regards
Ritu Saurabhmake sure that u have activate the content server in SCIF t code
if yes check with ur basis team as arun said -
URGENT :Photo Upload automation : help required
Hi Experts,
I need your help in my program which require executing DOS command from SAP ECC 6.0.
The requirement is "to make an automated SAP program workable with ECC 6.0 which will able to execute DOS command Dir *.jpg -> photo.txt to create a File Photo.txt, Then I need to upload this file automatically into SAP Internal table for further processing" that will lead to photo upload (this part is already done by me).
I am not sure if someone has done some similar things in past if yes kindly guide how to do this.
best Regards,
Rahul
nullHi Rahul
Firstly you need to create an archive to store the pictures. Then
Goto SM30 or SM31.
Enter the Table/view name as TOAAR_C.
Click on New Entries.
Give StSym as 'A2'.
Give a description ..
In Arch. Path enter as /.
Select the radio button 'File store'.
Save the entry.
You can view the photo through PA20/PA30/PA40 for each employee.
For this you have to add an entry in Table T588J for your header
modification.
The field type of this entry should be 'PIC'.
Then you have to run the report RPHDYNPG for generating the screen
header.
After the initial configuration as described above,
for uploading the Photo
Go to Tcode OAAD -> Create
Business Object : PREL
Document Type : HRICOLFOTO
Click on Create.
System will ask for personnel no and path of Photo
If you need detailed step by step procedure, do let us know. If you need a useful code to carry out this, do let me know with your email ID -
Pls help...
See the actions for the error message included here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
PSE 8 photo uploader freezing HELP
I have pse8 running on windows 7. Within the last 4 weeks my photo uploader has not been able to upload my photos from camera or phone in standard nor advance mode.
I connect my device and click (in organizer) get photos from camera and the dialog box pops up. I choose my device and than it just hangs there on "connecting to device ..please wait" I have to turn the device off in order to get it to stop. It then says "failed to upload thumbnails from device"
My work around is getting to be too much work (manually pulling photos into my folders and then letting organizer find them and bring them into organizer)
To my knowledge nothing on my pc changed in the last 4 weeks and I can not see any reason it is "behaving" this way.
Any help would be appreciated.
Thank you MelindaI have uninstalled and reinstalled the PSE 8 and it still will not get the phots from my camrea and phone, this frustating me.
Anyone know a solution????? -
Sql error in request.jsp - pls help
hi every1, can some1 pls help me. the situation is:- when someone renewed a book the date_Return has to be increased by 7 days.
to test i'm using the following:-
String sql="update resources set date_Return= '2003-01-22'";
also can u pls tell me how to convert the date to UK date.
thanking u in advance1) The easiest way to do the update would be to use your DBMSs
built-in date functionality. If date_Return is a date datatype
in your DBMS then there should be a function to add a number of
days to it. For example, in Sybase, you could write your UPDATE
statement as:
"update resources set date_Return = DateAdd(day, 7, date_Return)".
2) If, by UK date, you mean day-month-year, you can format the date
using the java.text.SimpleDateFormat.
http://java.sun.com/j2se/1.4.1/docs/api/java/text/SimpleDateFormat.html -
Hi
I wanted to refresh my dev environment quickly..
As we also wanted to migrate from exp/imp to datapump, I tried these..
Only thing worked for me is impdp on network mode using remap schema.
1)First i wanted to implement expdp and impdp standard procedures(Full database export/import)
My expdp failed with the following error on a full export..
Pls see below:
C:\Documents and Settings\oracle2>expdp system/<p.w> full=Y directory=DATA_PUMP_DIR dumpfile=OAPFULL.dmp logfile=OAPFULL.log
Export: Release 11.1.0.7.0 - Production on Thursday, 26 April, 2012 16:12:49
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Starting "SYSTEM"."SYS_EXPORT_FULL_02": system/******** full=Y directory=DATA_PUMP_DIR dumpfile=OAPFULL.dmp logfile=OAPFULL.log
Estimate in progress using BLOCKS method...
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 4.351 GB
Processing object type DATABASE_EXPORT/TABLESPACE
Processing object type DATABASE_EXPORT/PASSWORD_VERIFY_FUNCTION
Processing object type DATABASE_EXPORT/PROFILE
Processing object type DATABASE_EXPORT/SYS_USER/USER
Processing object type DATABASE_EXPORT/SCHEMA/USER
Processing object type DATABASE_EXPORT/ROLE
Processing object type DATABASE_EXPORT/GRANT/SYSTEM_GRANT/PROC_SYSTEM_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/GRANT/SYSTEM_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/ROLE_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/DEFAULT_ROLE
Processing object type DATABASE_EXPORT/SCHEMA/TABLESPACE_QUOTA
Processing object type DATABASE_EXPORT/RESOURCE_COST
Processing object type DATABASE_EXPORT/SCHEMA/DB_LINK
Processing object type DATABASE_EXPORT/TRUSTED_DB_LINK
Processing object type DATABASE_EXPORT/SCHEMA/SEQUENCE/SEQUENCE
Processing object type DATABASE_EXPORT/SCHEMA/SEQUENCE/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/DIRECTORY/DIRECTORY
Processing object type DATABASE_EXPORT/DIRECTORY/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/CONTEXT
Processing object type DATABASE_EXPORT/SCHEMA/PUBLIC_SYNONYM/SYNONYM
Processing object type DATABASE_EXPORT/SCHEMA/SYNONYM
ORA-39014: One or more workers have prematurely exited.
ORA-39029: worker 1 with process name "DW01" prematurely terminated
ORA-31672: Worker process DW01 died unexpectedly.
Job "SYSTEM"."SYS_EXPORT_FULL_02" stopped due to fatal error at 16:14:562)As the above failed, I tried impdp with network_link import and full=y and its a different issue!
impdp system/<p.w> NETWORK_LINK=OAPLIVE.WORLD full=y logfile=OAPDRfull2.log table_exists_
action=REPLACE
Import: Release 11.1.0.7.0 - Production on Thursday, 26 April, 2012 13:36:01
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** NETWORK_LINK=OAPLIVE.WORLD full=y logfile=OAPDRfull2.log table_exists_action=REPLACE
Estimate in progress using BLOCKS method...
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 4.670 GB
Processing object type DATABASE_EXPORT/TABLESPACE
ORA-31684: Object type TABLESPACE:"SYSAUX" already exists
*************lots more of object already exists errors here............(space limit so cant paste)***************
ORA-31684: Object type SYNONYM:"GEOPROD"."EXT_POSTAIM_PRESORT_61" already exists
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.DISPATCH_WORK_ITEMS [SYNONYM:"GEOPROD"."EXT_POSTAIM_PRESORT_61"]
ORA-31600: invalid input value 200001 for parameter HANDLE in function CLOSE
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA", line 569
ORA-06512: at "SYS.DBMS_METADATA", line 4731
ORA-06512: at "SYS.DBMS_METADATA", line 792
ORA-06512: at "SYS.DBMS_METADATA", line 4732
ORA-06512: at "SYS.KUPW$WORKER", line 2718
ORA-03113: end-of-file on communication channel
ORA-02055: distributed update operation failed; rollback required
ORA-02063: preceding lines from OAPLIVE.WORLD
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 7858
----- PL/SQL Call Stack -----
object line object
handle number name
242F2F2C 18256 package body SYS.KUPW$WORKER
242F2F2C 7885 package body SYS.KUPW$WORKER
242F2F2C 8657 package body SYS.KUPW$WORKER
242F2F2C 1545 package body SYS.KUPW$WORKER
241DDF3C 2 anonymous block
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA []
ORA-31642: the following SQL statement fails:
SELECT unique ku$.seq# from sys.metanametrans$ ku$ WHERE ku$.htype='DATABASE_EXPORT' AND ku$.model='ORACLE' AND NOT ( ku$.seq#>=(select a.seq# from sys.metanametrans$ a where
a.model='ORACLE' and a.htype='DATABASE_EXPORT' and a.name ='DATABASE_EXPORT/SCHEMA/SYNONYM')) order by ku$.seq#
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_METADATA_INT", line 5002
ORA-01427: single-row subquery returns more than one row
ORA-06512: at "SYS.DBMS_
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.KUPW$WORKER", line 7853
----- PL/SQL Call Stack -----
object line object
handle number name
242F2F2C 18256 package body SYS.KUPW$WORKER
242F2F2C 7885 package body SYS.KUPW$WORKER
242F2F2C 2744 package body SYS.KUPW$WORKER
242F2F2C 8523 package body SYS.KUPW$WORKER
242F2F2C 1545 package body SYS.KUPW$WORKER
241DDF3C 2 anonymous block
Job "SYSTEM"."SYS_IMPORT_FULL_01" stopped due to fatal error at 13:39:48So its basically these 2 issues I want to know how to fix.
1-expdp error cause and fix
2-impdp error cause and fix -Also how to avoid object alreay exists error?
Also for example the package etc. is the same name..but i want new package from LIVE so it means if the same name package, view, etc is there, it wouldnt get updated?
Any way to overcome this?
I need it exactly same as LIVE...(with a few exceptions which is small enough i can do after impdp finishes fine)
Pleaseeeeeeee help!!
Thanks&Regards.......Hi..
Thanks for the links..I applied the tips on each of them but it didnt work.
Also my database is 11g so it is not true that this happens on 10g only.
Things tried:
1)I tried with different values on parallel parameter but same error
2)I applied the following:
alter system set open_cursors=1024 scope=spfile;
alter system set "_optimizer_cost_based_transformation"=off;
commit;
The 3rd link was bit better
I tried to find out where exactly the error was causesusing
expdp attach =SYS_EXPORT_FULL_03
But I cant figure out what the object : PUBLIC
oracle/context/isearch/GetPage
is..?
Does this needs to be excluded from the export?if so, how?
Can someone help how to fix the error now?
Processing object type DATABASE_EXPORT/SCHEMA/SYNONYM
ORA-39014: One or more workers have prematurely exited.
ORA-39029: worker 1 with process name "DW01" prematurely terminated
ORA-31672: Worker process DW01 died unexpectedly.
Job "SYSTEM"."SYS_EXPORT_FULL_03" stopped due to fatal error at 11:29:32
C:\Documents and Settings\ora2>expdp attach=SYS_EXPORT_FULL_03
Export: Release 11.1.0.7.0 - Production on Tuesday, 01 May, 2012 11:35:38
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Username: system
Password:
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Job: SYS_EXPORT_FULL_03
Owner: SYSTEM
Operation: EXPORT
Creator Privs: TRUE
GUID: 8499C802F52A414A8BCACE552DDF6F11
Start Time: Tuesday, 01 May, 2012 11:37:56
Mode: FULL
Instance: geooap
Max Parallelism: 1
EXPORT Job Parameters:
Parameter Name Parameter Value:
CLIENT_COMMAND system/******** parfile=h:\datapump\oapfull.par
State: IDLING
Bytes Processed: 0
Current Parallelism: 1
Job Error Count: 0
Dump File: H:\datapump\oapfull.dmp
bytes written: 4,096
Worker 1 Status:
Process Name: DW01
State: UNDEFINED
Object Schema: PUBLIC
Object Name: oracle/context/isearch/GetPage
Object Type: DATABASE_EXPORT/SCHEMA/PUBLIC_SYNONYM/SYNONYM
Completed Objects: 766
Total Objects: 766
Worker Parallelism: 1 -
There is an error in photo upload?
I have tried unsuccessfully to upload photos from digital camera.
I have removed lots of files to trash and some to external harddrive but it still will not allow me to upload photos
Thank you for your help.Hello nasriosman,
It sounds like your calendar app is showing incorrect information. I recommend first closing all the running apps on the device:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that and restart the phone and test the issue again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
Take care,
Sterling -
IPod 60 Gb serious errors !!! pls help
my Ipod photo is not mounting on either of my systems (winxp or mac os x) . i tried formatting it but still to no avail. all i get is a folder with an exclamation mark. i reset it still no difference. i tried to reset it through the iPOD updated but it showed an error regarding some wrong hard disk structure. when i tried to format it through disk utility it showed "unknown error:-20"
I woudl be oblidged if u'll cud help.Formatting wont help. I'd say try on your mac to do a restore. To do that, go to the ipod updater and run restore. If that doesn't work, I'd suggest running Harddisk diagnostics to ensure the harddisk inside still works... to do that go to http://www.finseth.com/parts/ipod.html
-
Pet store runtime error! urgent! Pls help me out
Dear everybody,
I just install the petstore in my local computer, following the whole instruction from http://java.sun.com/blueprints/code/jps131/docs/installing.h tml
It seems all rite during the installation.
But when I try to access the
Amazon Parrot
Great companion for up to 75 years
in the bird category, I cannot see anything feed back. I checked the j2ee log, here is the output of it. I have no idea how to fix this problem, any tech people can help me? I need this sample code as a base of a project.
Thanks for whom can help!!
A hardworking progammer
Henry
Binding name:`java:comp/env/jms/QueueConnectionFactory`
Binding name:`java:comp/env/ejb/OPCAdminFacadeRemote`
Binding name:`java:comp/env/ejb/AsyncSender`
Created Context:/admin
Application AdminEAR deployed.
java.security.PrivilegedActionException: javax.servlet.ServletException: An erro
r occurred while evaluating custom action attribute "value" with value "${item.a<br />ttribute}": Unable to find a value for "attribute" in object of class "com.sun.j<br />2ee.blueprints.catalog.model.Item" using operator "."
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationDispatcher.include(Appli cationDis
patcher.java:488)
at com.sun.j2ee.blueprints.waf.view.template.tags.InsertTag.doE ndTag(Ins
ertTag.java:99)
at org.apache.jsp.template$jsp._jspService(template$jsp.java:15 9)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.ja va:107)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.servi ce(JspSer
vlet.java:202)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServl et.java:3
82)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java :474)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationDispatcher.invoke(Applic ationDisp
atcher.java:683)
at org.apache.catalina.core.ApplicationDispatcher.doForward(App licationD
ispatcher.java:431)
at org.apache.catalina.core.ApplicationDispatcher.access$0(Appl icationDi
spatcher.java:359)
at org.apache.catalina.core.ApplicationDispatcher$PrivilegedFor ward.run(
ApplicationDispatcher.java:130)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationDispatcher.forward(Appli cationDis
patcher.java:347)
at com.sun.j2ee.blueprints.waf.view.template.TemplateServlet.in sertTempl
ate(TemplateServlet.java:288)
at com.sun.j2ee.blueprints.waf.view.template.TemplateServlet.pr ocess(Tem
plateServlet.java:246)
at com.sun.j2ee.blueprints.waf.view.template.TemplateServlet.do Get(Templ
ateServlet.java:143)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFi lter(Appl
icationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.access$0(App licationF
ilterChain.java:197)
at org.apache.catalina.core.ApplicationFilterChain$1.run(Applic ationFilt
erChain.java:176)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(App licationF
ilterChain.java:172)
at com.sun.j2ee.blueprints.signon.web.SignOnFilter.doFilter(Sig nOnFilter
.java:151)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFi lter(Appl
icationFilterChain.java:213)
at org.apache.catalina.core.ApplicationFilterChain.access$0(App licationF
ilterChain.java:197)
at org.apache.catalina.core.ApplicationFilterChain$1.run(Applic ationFilt
erChain.java:176)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(App licationF
ilterChain.java:172)
at com.sun.j2ee.blueprints.encodingfilter.web.EncodingFilter.do Filter(En
codingFilter.java:77)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFi lter(Appl
icationFilterChain.java:213)
at org.apache.catalina.core.ApplicationFilterChain.access$0(App licationF
ilterChain.java:197)
at org.apache.catalina.core.ApplicationFilterChain$1.run(Applic ationFilt
erChain.java:176)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(App licationF
ilterChain.java:172)
at org.apache.catalina.core.StandardWrapperValve.invoke(Standar dWrapperV
alve.java:243)
at org.apache.catalina.core.StandardPipeline.invokeNext(Standar dPipeline
.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPip eline.jav
a:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase. java:943)
at org.apache.catalina.core.StandardContextValve.invoke(Standar dContextV
alve.java:201)
at org.apache.catalina.core.StandardPipeline.invokeNext(Standar dPipeline
.java:566)
at org.apache.catalina.valves.CertificatesValve.invoke(Certific atesValve
.java:246)
at org.apache.catalina.core.StandardPipeline.invokeNext(Standar dPipeline
.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPip eline.jav
a:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase. java:943)
at org.apache.catalina.core.StandardContext.invoke(StandardCont ext.java:
2343)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHo stValve.j
ava:164)
at org.apache.catalina.core.StandardPipeline.invokeNext(Standar dPipeline
.java:566)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(Error Dispatche
rValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(Standar dPipeline
.java:564)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorRepo rtValve.j
ava:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(Standar dPipeline
.java:564)
at org.apache.catalina.authenticator.SingleSignOn.invoke(Single SignOn.ja
va:392)
at org.apache.catalina.core.StandardPipeline.invokeNext(Standar dPipeline
.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPip eline.jav
a:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase. java:943)
at org.apache.catalina.core.StandardEngineValve.invoke(Standard EngineVal
ve.java:174)
at org.apache.catalina.core.StandardPipeline.invokeNext(Standar dPipeline
.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPip eline.jav
a:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase. java:943)
at org.apache.catalina.connector.http.HttpProcessor.process(Htt pProcesso
r.java:1012)
at org.apache.catalina.connector.http.HttpProcessor.run(HttpPro cessor.ja
va:1107)
at java.lang.Thread.run(Thread.java:534)
Caused by: javax.servlet.ServletException: An error occurred while evaluating cu
stom action attribute "value" with value "${item.attribute}": Unable to find a v
alue for "attribute" in object of class "com.sun.j2ee.blueprints.catalog.model.I<br />tem" using operator "."
at org.apache.jasper.runtime.PageContextImpl.handlePageExceptio n(PageCon
textImpl.java:463)
at org.apache.jsp.product$jsp._jspService(product$jsp.java:1357 )
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.ja va:107)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.servi ce(JspSer
vlet.java:202)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServl et.java:3
82)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java :474)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationDispatcher.invoke(Applic ationDisp
atcher.java:683)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(App licationD
ispatcher.java:574)
at org.apache.catalina.core.ApplicationDispatcher.access$1(Appl icationDi
spatcher.java:501)
at org.apache.catalina.core.ApplicationDispatcher$PrivilegedInc lude.run(
ApplicationDispatcher.java:146)
... 66 more
InsertTag:doEndTag caught: javax.servlet.ServletException: An error occurred whi
le evaluating custom action attribute "value" with value "${item.attribute}": Un
able to find a value for "attribute" in object of class "com.sun.j2ee.blueprints<br />.catalog.model.Item" using operator "."
javax.servlet.ServletException: An error occurred while evaluating custom action
attribute "value" with value "${item.attribute}": Unable to find a value for "a<br />ttribute" in object of class "com.sun.j2ee.blueprints.catalog.model.Item" using
operator "."
at org.apache.jasper.runtime.PageContextImpl.handlePageExceptio n(PageCon
textImpl.java:463)
at org.apache.jsp.product$jsp._jspService(product$jsp.java:1357 )
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.ja va:107)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.servi ce(JspSer
vlet.java:202)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServl et.java:3
82)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java :474)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationDispatcher.invoke(Applic ationDisp
atcher.java:683)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(App licationD
ispatcher.java:574)
at org.apache.catalina.core.ApplicationDispatcher.access$1(Appl icationDi
spatcher.java:501)
at org.apache.catalina.core.ApplicationDispatcher$PrivilegedInc lude.run(
ApplicationDispatcher.java:146)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationDispatcher.include(Appli cationDis
patcher.java:488)
at com.sun.j2ee.blueprints.waf.view.template.tags.InsertTag.doE ndTag(Ins
ertTag.java:99)
at org.apache.jsp.template$jsp._jspService(template$jsp.java:15 9)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.ja va:107)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.servi ce(JspSer
vlet.java:202)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServl et.java:3
82)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java :474)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationDispatcher.invoke(Applic ationDisp
atcher.java:683)
at org.apache.catalina.core.ApplicationDispatcher.doForward(App licationD
ispatcher.java:431)
at org.apache.catalina.core.ApplicationDispatcher.access$0(Appl icationDi
spatcher.java:359)
at org.apache.catalina.core.ApplicationDispatcher$PrivilegedFor ward.run(
ApplicationDispatcher.java:130)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationDispatcher.forward(Appli cationDis
patcher.java:347)
at com.sun.j2ee.blueprints.waf.view.template.TemplateServlet.in sertTempl
ate(TemplateServlet.java:288)
at com.sun.j2ee.blueprints.waf.view.template.TemplateServlet.pr ocess(Tem
plateServlet.java:246)
at com.sun.j2ee.blueprints.waf.view.template.TemplateServlet.do Get(Templ
ateServlet.java:143)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFi lter(Appl
icationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.access$0(App licationF
ilterChain.java:197)
at org.apache.catalina.core.ApplicationFilterChain$1.run(Applic ationFilt
erChain.java:176)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(App licationF
ilterChain.java:172)
at com.sun.j2ee.blueprints.signon.web.SignOnFilter.doFilter(Sig nOnFilter
.java:151)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFi lter(Appl
icationFilterChain.java:213)
at org.apache.catalina.core.ApplicationFilterChain.access$0(App licationF
ilterChain.java:197)
at org.apache.catalina.core.ApplicationFilterChain$1.run(Applic ationFilt
erChain.java:176)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(App licationF
ilterChain.java:172)
at com.sun.j2ee.blueprints.encodingfilter.web.EncodingFilter.do Filter(En
codingFilter.java:77)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFi lter(Appl
icationFilterChain.java:213)
at org.apache.catalina.core.ApplicationFilterChain.access$0(App licationF
ilterChain.java:197)
at org.apache.catalina.core.ApplicationFilterChain$1.run(Applic ationFilt
erChain.java:176)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(App licationF
ilterChain.java:172)
at org.apache.catalina.core.StandardWrapperValve.invoke(Standar dWrapperV
alve.java:243)
at org.apache.catalina.core.StandardPipeline.invokeNext(Standar dPipeline
.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPip eline.jav
a:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase. java:943)
at org.apache.catalina.core.StandardContextValve.invoke(Standar dContextV
alve.java:201)
at org.apache.catalina.core.StandardPipeline.invokeNext(Standar dPipeline
.java:566)
at org.apache.catalina.valves.CertificatesValve.invoke(Certific atesValve
.java:246)
at org.apache.catalina.core.StandardPipeline.invokeNext(Standar dPipeline
.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPip eline.jav
a:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase. java:943)
at org.apache.catalina.core.StandardContext.invoke(StandardCont ext.java:
2343)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHo stValve.j
ava:164)
at org.apache.catalina.core.StandardPipeline.invokeNext(Standar dPipeline
.java:566)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(Error Dispatche
rValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(Standar dPipeline
.java:564)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorRepo rtValve.j
ava:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(Standar dPipeline
.java:564)
at org.apache.catalina.authenticator.SingleSignOn.invoke(Single SignOn.ja
va:392)
at org.apache.catalina.core.StandardPipeline.invokeNext(Standar dPipeline
.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPip eline.jav
a:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase. java:943)
at org.apache.catalina.core.StandardEngineValve.invoke(Standard EngineVal
ve.java:174)
at org.apache.catalina.core.StandardPipeline.invokeNext(Standar dPipeline
.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPip eline.jav
a:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase. java:943)
at org.apache.catalina.connector.http.HttpProcessor.process(Htt pProcesso
r.java:1012)
at org.apache.catalina.connector.http.HttpProcessor.run(HttpPro cessor.ja
va:1107)
at java.lang.Thread.run(Thread.java:534)Hello Everybody
I have the procedure to run petsotre demo as it is given in the Java BluePrints Projects Install Document.
But when I have tried to run the ant setup command it it has given me the following error
BUILD FAILED
java.lang.AbstractMethodError: javax.xml.parsers.SAXParser.getXMLReader()Lorg/xml/sax/XMLReader;
at org.apache.tools.ant.util.JAXPUtils.getNamespaceXMLReader(JAXPUtils.java:163)
at org.apache.tools.ant.helper.ProjectHelper2.parse(ProjectHelper2.java:193)
at org.apache.tools.ant.helper.ProjectHelper2.parse(ProjectHelper2.java:140)
at org.apache.tools.ant.ProjectHelper.configureProject(ProjectHelper.java:91)
at org.apache.tools.ant.Main.runBuild(Main.java:653)
at org.apache.tools.ant.Main.startAnt(Main.java:187)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:246)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:67)
Total time: 0 seconds
java.lang.AbstractMethodError: javax.xml.parsers.SAXParser.getXMLReader()Lorg/xml/sax/XMLReader;
at org.apache.tools.ant.util.JAXPUtils.getNamespaceXMLReader(JAXPUtils.java:163)
at org.apache.tools.ant.helper.ProjectHelper2.parse(ProjectHelper2.java:193)
at org.apache.tools.ant.helper.ProjectHelper2.parse(ProjectHelper2.java:140)
at org.apache.tools.ant.ProjectHelper.configureProject(ProjectHelper.java:91)
at org.apache.tools.ant.Main.runBuild(Main.java:653)
at org.apache.tools.ant.Main.startAnt(Main.java:187)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:246)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:67)
javax.xml.parsers.SAXParser.getXMLReader()Lorg/xml/sax/XMLReader;
Plz help to rectify this error .
Regards,
Chirag Viradiya
Maybe you are looking for
-
Can you automate 'page turn' transition when exporting a document to Flash?
I have created a multi-page document with a page turn transition which I have exported to Flash to upload to a website. The page turning works fine manually but I want to automate the effect, remaining on each page for 30 seconds before automatically
-
Synchronize built-in - Functionality
Hi All, I have following code written in one of the forms. These forms have been written long time ago and now we have converted the Forms from 6i to 10g so dealing with some of the lost network issue. I just need to know what this Synchronize built
-
Sysjobs: originating_server_id is getting zero instead of server id
Hi I am getting zero value in column originating_server_id of SysJobs table instead of getting server id whenever i am firing command like below use msdb select job_id,originating_server_id,name,enabled,description,start_step_id,category_id,owner_si
-
Hi, I have an XML schema registered with Oracle. The schema is annotated and during registration the PL/SQL types are created. I can validate an XMLType with this schema, as well as use toObject to populate an object with data from the XMLType. The X
-
I can't even get the darn thing to open - it just sits there in the dock. Any ideas?