Error in picking material from storage loc.
Hi Experts,
I am creating a delivery w.r.t sales order. i am getting this following error.
Material SRCBULK does not exist in plant GC01
Message no. VL411
I have checked the message and its corresponding upgrades. Its already there as i am having ECC 6.0 EHp1
The material is already entended to storage loc and plant. Also there is sufficient stock.
Please let me know if there is any config changes.
Hi KC,
Go though the link given below, It will help you out.
Material F001TD does not exist in plant HDQF
Regards,
MT
Similar Messages
-
STO to transfer material from Stor.Loc. 0001 to 0002 under the same Plant
Dear friends ,
Does anyone already have used the new functionlity to transfer material from Storage Location 0001 to Storage Location 0002 under the same plant with STO ?
Which delivery and movement type should I use to do that ? we put a mov. type 311 but errors appear for us.
best regards,
AlessandroHi Alessandro,
You can very well create an STO keeping the issueing and receiving plant as same and mentioning the issue S.location and do the DO using VL10B and PGI using VL02N.
at the time of GR you can specify the receiving S.location and post the GR.
There is no any requirement for specific config.
Regards
Merwyn -
Detetion material from storage location
Hi All ,
I wanted to delete a material from a storage location .Can any one suggest me to delete material from storage location other than blocking material for storage location using MM06 .I suppose that it can not done by using MMSC.
Thanks & Regards,
Srikanth P.Dear,
If you created an material by error and you want to delete that material from the data base you can do it in this simple 4 steps. The only condition is that this material has to have no material movement recorded.
These are the steps:1
1) Flag material for deletion. transaction MM06
2) Run report MMREO001 - Selection of materials flagged for deletion and select the material
3) Run report MMREO050 Archive Materials to archive the material (some customisig settings might be required)
4) Run report MMREO110 Deletion Program for Archiving Materials to delete the material from the database.
These reports are called by the SARA transaction too.
Regards,
Syed Hussain. -
Error printing pick list from IW32
Hi all,
When trying to print pick list from transaction IW32, I get this error message:
Express document "Update was terminated" received from author ...
When I checked out this error message in SM13, I found this:
Transaction code: IW32
Module name (function): PM_ORDER_PRINT_CONTROL
Status: Update was terminated
Raise exception: KEY_NOT_FULLY_SPECIFIED (Complete key not entered)
The shop paper (pick list) is customer defined (Z*) under application area O (Maintenance orders). This shop paper is set up to print to a certain printer, P1, and printing other PLM documents on this output device works fine.
Does anyone have an idea what can be causing this error?
All helpful answers will be rewarded.
Best regards,
MVHi,
I have tried to print the pick list several times, in development, test, and production systems. It fails with the same error each time.
Do you have any ideas why this error occurs, is there any special IMG activity or PLM configuration that I could check to see if some printer settings are wrong?
Regards,
MV -
Transfer material from Storage location to Storage type.
Hello,
At the time of usage decision we are posting the stock in "To Reserve stock" for that we have created seperate storage location ie for Sample material.
we having two samples one is customer sample and other is in house sample both the samples we are posting in same storage location.
Client want to differentiate these two samples, so we have created two storage types.
Now My question is " can we transfer the samples in different storage types from Storage location.
This is the QM and WM integration.
Please advice
Thanks in advance.
Regards
AnilHello Anil
I don't think you can transfer from storage location to storage type.
If your purpose is to differentiate these two samples, then why not use different Sample types with different number ranges and thus identify them. You don't have to get into QM-WM integration just for that.
If you want you may also set up 2 different physical sample locations: That would be ideal.
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Types
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Number Range
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Locations
On the application side you may use the sample management procedures to deal with samples. See the following link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b8/b9b3341a933f50e10000009b38f83b/frameset.htm
Does that work? Let me know. -
Error in picking files from FTP Site
Dear All,
I m using one communication channel of type FILE to pick the files from a FTP Site. Yesterday, the communication channel stopped picking the files from the FTP site. I checked the adapter in the Adapter Monitoring and it was green and was showing success messages in SXMB_MONI. I then just reactivated the complete scenario and the communication channel started picking the files again.
Is there a way to find out the trace or log in the server for the adapter or communication channel? Or how can I find out what went wrong.
Warm Regards,
N.JainHello Nishant,
That is a problem which happens frequently( atleast i faced the same ) .
The issue is realted to timeout in your FTP Adapter (Connection Issue). Just check out the mode of connection in your file adapter is it permanant or reconnect after a certain time.
What you can possibly do is contact the team which maintains the FTP server...
Regards,
Sumit -
Material Transfer from Storage Location 2 Storage loc
Hi Gurus,
Here Client want to transfer Material from 1 loc to another. Std T Code is MB1B with Mov Type 309. But here we have to enter material, qty,& batch no.But client's requirement is that he dont want to enter all these things.He want to select the material,batches collectively sothat seperate entry should be minimised. Is there any functionality through which we can transfer the selected materials?
Please reply soon its urgent.
Regards,
MayurHi mayur
First of all 309 movement is ussed for Material to material transfer
like our friend said for storage loc to storage loc. you need to use 311
Now when you go to MB1B then goto Edit in that you can see default value
enter your default value , so after that you need to choose only material and batch
collectively
Thanks
Bala -
Budget error while creating delivery from sales order
hi Gurus,
System is throwing error PB603 "Item 004 WBS element ABC-XXX budget exceeded" while creating delivery from sales order.
I am picking material from unrestricted plant stock (not in project stock).
I am also confused as sales order has 3 line items & error shows Item 004 !Hi Kuldeep,
Check this note,
Note 159387 - Message BP603: incorrect line item is displayed
Its valid only till 4.6. Might give you some idea but.
Regards,
Gokul -
Sap wms transfering material from warehouse to warehouse
hi
could any;body explain the process of how to transfer the material from storage location to warehouse and
warehouse to warehouse .
non warehouse to with warehouse .
can u explain step by step .
thanks inadvance.Hi,
Before explaining the difference of material stock transfer with or without WM in SAP system, let's clarify two different levels IM and WM:
IM -- Inventory Management, all materials will be managed at this level without WM module activated;
WM -- Warehouse Management, if WM is activated at some one storage location, then all materials at the storage location will be managed at WM level, that is to say at storage bin level.
So we can see the difference processes of stock transfer as follows:
Storage location to Storage location without WM: When do it with MIGO or MB1B, system will only generate the material document to record the operation of stock transfer in SAP system, the stock will be transferred to the destination storage location automatically;
Storage location without WM to Storage location with WM: Under this scenario, because the destination storage location with WM, after do it with MIGO or MB1B, you need to create the transfer order or let system generate it automatically. The stock will not be transferred to the destination until the transfer order is confirmed;
Storage location to Storage location with WM: At this scenario, you need to create two transfer orders, the first one is for the pick up process from source bin of the first storage location, the other one is for the put away process to destination bin of the second storage loction.
That's so, hope can help you!
Good day
Tao -
Shipping point storage loc determination
If same material master record is sold as finished good and sample material and if there are 2 shipping points and 2 storage locations for this material, (Sample storage loc and shipping point and finished good storage loc and shipping point. ) and we are creating different types of sales orders with different type of item categories. What would be the solution to detemrine the correct shipping point and storage location for this material ?
If you have separate Plant also then as per the Plant ,maintain Loading Group in Material Master in Sales : General / Plant.Now in OVL2 ,assign the combination of Shipping Conditions , Plant & Loading Group with Shipping point for both Finished & Sample Material.
In such case , while creating the Sales Order , system will pick the Shipping Point as per the combination maintained by you.
Best Regards,
Ankur -
Throw error during PO creation if a material is not extended to storage loc
Hi,
Users require for SAP to throw an error during PO creation if a material is not extended to the storage location that is entered on the PO.
Presently it neither gives warning or error message.
Please advise.
Regards,
PratapSAP does not validate that, if you want it, then you have to do such check in a user exit.
SAP can be customized to create the material master storage location segment itself when posting the goods receipt, so it is not necessary to check this in the PO.
Further this design speeds up the process, you can already order before others have finished the material master maintenance. -
Hi Gurus,
I have defined one picking storage location for one shipping point but it does not check stock from other storage location.
Is there a way to pick stock from two storage locations in delivery ?
I understand to transfer stock to first st. loc. and from there it will picked for delivery but wondering if there is way to pick stock from both st. locs in delivery without tranfering to first stock.
Appreciate your help on it.
Thanks,
ManojHi,
Picking storage location defined in V_TVKOL (SPRO > LE > Shipping > Picking > Determine Picking Location > Assign Picking Location) is only one thing. You can change the automatically proposed SLoc in the delivery document (VL01N / VL02N) manually (in standard system) - this is because if a plant is assgned to a shipping point (SPRO > Enterprice structure > Assignment > LE > Assign shipping point to plant), this is valid for all SLoc that are under your plant.
(Isn't it possible that your SLoc is excluded from MRP (MRP4 view of material master) and that's why the stock is not considered during availability check? If it is so, I think you should be able to deliver from that SLoc eliminating the availability check.)
Please clarify your problem.
Regards,
Csaba -
Material Staging for Pick part from MF60
Hi,
I would like to do material staging for a Pick part from MF60.
During staging I get the error as
WM material staging for production order reservation not possible
Message no. RMPU311
Kindly can you tell me how is it possible to perform tthis action using MF60.
Using LP10 I am able to perform this staging for pick part. But Business requires to perform if from MF60.
Thank YouHI,
It is possible to do staging for pick parts using MF60.
I am setting up this for a plant, and the existing plants are able to do staging with MF60 for Pick Parts.
Do you know the configuration that are required for doing staging using Pull List.. -
SUT Error at TO Creation from Non-SU to SU managed Storage type
Hi
I am creating TO to move quants from Non-SU Manged Storage type to SU managed Storage type, but at first its giving error saying Enter SUT for storage type. These Non-SU managed Storage types are not having SUT Check but SU Managed storage type is having SUT Check.
I tried to update WM view-2 with SUT and palletization but still issue exists.
I am having batch job for RLAUTA10 where TR is converted to TO but due to above issue , this batch job is getting failed.
I am deseperately trying to find the root cause and fix this asap. Let me know how this issue can be resolved??
ThanksLike I mentioned earlier in my posts, SU's are typically not managed in interim storage types. Apparently, in this case, the PSA is an SU managed location and you are trying to move inventory from a non-SU ST to SU PSA ST. The isse that you are encountering is due to the reason that the palletization data maintained in the material master is defaulted during receipts rather than staging therefore, the SUT field in the TR remains blank. But, due to business reasons you are using SU's in PSA's then you'd have to venture into development options to include SU types during automatic converion of staging TRs into TOs.
-
A MM transfer movement is posted from the WM warehouse to a MM storage loca
Hi Friends,
I need your help in MM
1) A MM transfer movement is posted from the WM warehouse to a MM storage location
2) The corresponding WM transfer order is confirmed with difference of quantity.
I am posting an idoc after cancaltion on material document it has to take quantity from storage bin and it has to create one more idoc of the remaining quantity it is urgent requirement.Hi,
Never came across this scenario but if i have to design then i can think like
1) Staging, create Transfer order,
2) Perform the physical picking
3) Confirm the transfer order (if the T-Code is Custom then you can directly call the step 4 after successful completion of step 3)
4) Custom code to trigger Sloc to Sloc in backend by calling FM : BAPI_GOODSMVT_CREATE
5) Supply the recently confirmed Quant number internally to the program and perform the process
Maybe you are looking for
-
Hi, Could you help me out with the code in the alert modeler to achieve this functionality. After i confirm the BP i would like the sevice ticket transaction to appear by default rather than clicking on the link in the navigation bar. I know this fun
-
I do not see my music and videos icon....how do I make them appear?
-
Extracting Metadata using Common Table Expressions MSSQL
I have been using the below SQL query to extract subsets of the Metadata structure from several dimensions in HFM. The process works well and is simple/quick to develop and incorporate in existing processes. I am curious if anyone else has been using
-
My maps didn't show the right current position
Is anyone can help me how to fix this? I always get lost because the maps didn't show my current position. In fact the maps shows other location.. Regards,
-
HT2589 this apple id has not yet been used in the itunes store
i could not login in itunes store