Error in playback within Final Cut Express HD

I just bought the Apple Pro Training Series Book for FCE HD, and I opened up a lesson in which they begin showing me the basics of video editing. I begin playing the premade videos they had in the canvas, and after only one second the videos freezes and sends me an error report saying...
-Turn off unlimited RT
-Lower your compression rate
-Closing open sequences
-Lowering the preference for real-time audio
-Increasing the speed of your system and or disk drives and or network connection...
I have a relatively new MacBook Pro with 2GB's of RAM...Can someone please explain the problem to me!

Sounds to me like the files are still on the DVD training disk it came with.
Drag those files to your hard drive and try again.
FCE is trying to read the DVD's contents, which is a low speed, and so is OS X, making it slower.
It's probably a lot of hard drive space, just delete the files when you're done with them.
Remember to mark as helpful or solved.
-benny-

Similar Messages

Why is the playback in Final Cut Express 4 delayed by 30 seconds?

I am finding editing with Final Cut Express 4 has gotten slow and frustrating. This is a new problem. I have used this software for two years with no problems until now. I'll start out editing a project normally for about an hour. Then the playback function starts to lag. After I render a clip and try to play back what I've done by hitting the space bar, I have to look at the spinning color wheel for 30 seconds before my video will play. I have no other programs open, I have 10 GB of RAM. I upgraded my OS from Leopard to Snow Leopard a few months ago. All my Apple Software is updated. FCX has also been crashing and locking up. Is there a preferred way to save my project for more efficient editing? I also tried starting a new project with only a five minute audio mp3 clip and a 10 sec slug for video. I get the same playback delay with this project. In this case I only saved the project not "save all".

Hi Robert,
I've never unistalled and reinstalled an OS so it's a little scary for me.
I suggested uninstalling/reinstalling Final Cut Express, not the OS!
When I click on the FCE icon on my task bar to open it, which version is being opened?
Probably the one on your 1TB drive, but to be sure, you can always just open your /Applications folder on the 1TB drive and double-click the FCE application to start FCE.
Could there be a problem with a duplication of applications such as FCE on these two drives?
Highly unlikely. The system looks for applications in the /Applications folder on your startup drive, which is now your 1TB drive.
My video is 4:3 so I chose 640x480 to prevent stretching of the image.
No, you need to choose 720x480 (DV-NTSC) frame size. This is the standard 4:3 DV frame size. 640x480 is a computer monitor resolution. 720x480 is the actual, standard def, DV (television) frame size. It is 4:3. The 720 line height includes something called "overscan" which you never actually see. The image you see will be 4:3. FCE is not designed for 640x480 frame size ... do you have to render these clips after you put them in your DV-NTSC sequence?
Then after about an hour of editing, the playback delays started up again.
Well, that's bizarre, I must admit. Kinda has me stumped, except for the possibility that FCE may need to be uninstalled/reinstalled.

Audio playback in Final Cut Express 4

Captured some clips and started a sequence all was fine. rebooted the software to get around an issue where it wouldnt let me drop any transitions in which is now fine. Now however im not getting any audio playback even though i can see the audio on the VUs. Now in system setting i Audio capture in the scratch disc section is not highlighted.. This is doing my head in cant find away around it. Please help..

Ignore the greyed out "Audio Capture".
It has always been like that and you can't alter it from the scratch disk you have set for the video.

"Ticking" sound in DVD playback of Final Cut Express 2.0.3 movie. HELP pls

thanks in advance for responses and/or direction to previous posts that I may have missed in trying to locate previous discussion:
45 minute film, rich in sound (both music, raw footage source material) and produced (whew). In viewing on TV via DVD player (two different TVs tested now) there is a "ticking" sound that accompanies soundtrack, amplified in parts that seemed busier in the layers of elements used (i.e. parts of film with simultaneous narration, music and sound efx).
this sound was present on iMac and I attributed it to inferior processor speed needed to work with film. Short of purchasing tower and upgrading which cannot be done now, any advice please welcome and thank you on how to minimize this ticking sound? Any settings in FCE 2.0.3 that could be adjusted to minimize if it is indeed a processor issue? Or is this something I should take up with iDVD board? (project burned via iDVD 5)..
FYI: project converted via "Quicktime Movie" option, imported into iDVD.
thank you
iMac Mac OS X (10.3.9) FCE 2.0.3, 768 RAM, 800 Mhz

I think iDVD 5 is the first version of iDVD to support anamophic. Sounds like you did the right stuff in FCE. You had the Easy Setup on anamorphic when you captured and when you created the anamorphic sequence.
Take a look at the iDVD forum or Google "iDVD Anamorphic".

Adjusting volume within Final Cut Express

Hi all - can someone please advise how to change volume in FCexpress. I need to face in and fade out along the audio timeline.
Many thanks

Turn on the opacity overlays (clip overlays). Then use the pen tool to place keyframes along the overlay line in the audio track(s) at the locations where you want to adjust the gain. Then use the select tool to drag the audio overlay line up or down appropriately to achieve the levels you want. Always keep in mind that these adjustments happen between two successive keyframes - you may need to add more keyframes than you would otherwise believe necessary.
You can also set keyframes and adjust the gain if you open the clip in the Viewer and select the audio tab.
Also, if you increase the gain, watch the levels meter - try not to let the meter exceed -6db at the loudest parts. If it exceeds 0db you will get some nasty clipping.

Capturing into Final Cut Express

I work within Final Cut Express and up until now i was capturing footage via a sony camcorder with a firwire connect.
But i have just recently bought a panasonic gs 500 which comes with a usb cable connection. So i plugged it in, opened Fianl Cut and it doesnt recognise the camcorder being attached? I know the camcorder works with Final Cut, so i wondered if it is because i need a newer version of Fianl Cut to work with usb connection, or that i will need to buy a firewire cable for my camcorder? Any help would be great, want to get capturing footage.

Most camcorders that I've encountered don't come from the factory with a FireWire cable - you have to supply your own. A USB cable is usually included to transfer stills, not video.
Again, FCE captures via FireWire, not USB. Beyond that, USB cannot sustain the throughput required for video. Even though the USB2 spec appears to be faster than FW400, that's simply not the case in real life. The explanation involves the electrical, signalling & protocol characteristics of USB vs. Firewire.
USB cables (esp. the cheap ones packaged with cameras) are much less costly than FireWire cables. We might like the manufacturer to bundle a FW cable with the camcorder, but the manufacturer sees that as an unnecessarily expensive accessory.

How to change framerate in Final Cut Express

Hello everybody - Just a simple question. How can I change the framerate to 24 fps of a sequence within Final Cut Express? Or to any other framerate? Thanks

OK, at least it's clear for me now, thank you very much

Dropping an audio track onto a PSD file imported into Final Cut Express

I created a credits page for my video in Photoshop and then imported it into Final Cut Express (Version 1.0). I then duplicated part of an audio track from another sequence (My friend's father playing the organ), and dropped it onto the Photoshop credits sequence. It displayed and played nicely in Final Cut Express, but did not create an audio track which was visible within Final Cut Express. When I exported the sequence as a .mov file and then imported that into iDVD, it also displayed and played correctly in iDVD. But when I burned the DVD, there was no longer any audio with the credits. Any suggestions?
iMac Mac OS X (10.4.5)

Thanks so much for your response. I selected and copied tracks A1 and A2 from one sequence and then pasted them into the credits (Photoshop) sequence. No audio tracks appeared in the Photoshop sequence, but we could hear the audio when we played the Photoshop sequence.
There was video associated with the original organ track, and we did not lock off the video when we dropped it into the Timeline, although there didn't seem to be any problem with the video. We did not Mixdown the audio either, although no audio tracks were displayed in the Photoshop sequence. I will try both of those things and see if it makes a difference. Thanks again.
iMac Mac OS X (10.4.5)

Final Cut Express not opening, error says final FCE disks are missing.

Hi there,
Recently I got a WD Fire Wire 800 Hard drive for christmas so I could move all of my final cut projects over to the HD.
When I moved my final cut express documents including all of the folders it now says this error.
To preserve the integrity of the data used by final cut express, it is necessary to ensure the existence of the following paths;
- My HDD Chris is missing
Then it gives me the option to reset scratch disks, check again or quit.
So I'm not sure what I do.
Should I simply move back all the folders and documents that I moved to my hard drive (btw I tried this but it still gave the same error message). I have deleted final cut express 4.1 and re installed 4.0 to see if it works but it didn't and has the same error message.
Any tips would be helpful.
Chees, Chris.

Tom Wolsky wrote:
I can't even open FCE any more because I have moved everything onto the external hard drive including software 'everything'.
You moved the software? You can't do that. That's fatal. The software must be on the system drive as it requires system resources. Move the application called Final Cut Express back into the top level of the Applications folder. Do it move it, rename it, or put it inside a folder.
Do not assign the scratch disk to a folder anywhere. If you want the scratch disk to be on your external drive select the top level of the external drive. FCE will create the folders it needs in that location.
Hi,
When you say move the application final cut express into the application folder.
Do you mean move my folder of final cut express that I moved onto my HDD?
If so it's copying the 20GB folder as I speak. Hopefully fixes this frustrating problem..
Cheers, Chris.

Iam trying to import a short video in final cut express and I'm getting this error... File Error: 1 file(s) recognized, 0 access denied, 1 unknown. How do I solve this problem? The video is on my desktop it's an mpg.

Iam trying to import a short video in final cut express and I'm getting this error... File Error: 1 file(s) recognized. 0 access denied, 1 unknown. How do I solve this problem? The video is on my desktop and it's an mpg file. Please help me

Get a copy of MPEG Streamclip and convert your MPG file to QuickTime/Apple Intermediate Codec (AIC). In FCE, select one of the setups that uses AIC that best matches your clip (say, 1920x1080i60). Create a new sequence, then import the converted file.
Note that if your MPG file is actually MPEG2 you will also need the QuickTime MPEG2 Component in addition to MPEG Streamclip.
What was the source of the MPG file? How about if you open it in QuickTime, then do Window > Show Movie Inspector. Tell us what it says for codec/compression, frame size & frame rate.

Disk space error - final cut express 4

I'm new to final cut express. I color corrected a 60 minute video clip and attempted to export the sequence to Quicktime. It got about 80% complete and stopped due to out of disk space error. I have about 16 GB of remaining internal hard drive space on my macbook pro. I just received the software last night, so I do not yet understand scratch disk setup, etc. Is there a preference I should change or should I export to an external hard drive? I'm attempting to
import the final clip into imovie and idvd.

In addition to Al's response, with only 16GB left on your internal hard drive you are effectively out of disk space. You need to move stuff off that drive and/or delete what you no longer need. If you are doing video it is wise to keep at least 50% free space especially if the drive capacity is 500GB or less.
If you are doing HD video, here are some numbers to consider:
1 hour source media (video clips) = ~45GB
1 hour of render files of your 1 hour movie = ~45GB
1 hour exported QT movie = ~45GB
1 hour iDVD project of your completed QT movie = 2 to 4 GB
So your 1 hour project could easily consume 140GB of disk space.

HDR CX7 with Final Cut Express gives me error message

A couple of days ago I got Final Cut Express 4. When I tried to log and transfer clips with my Sony Handycam HDR-CX7, all the clips were there on the Log and Transfer screen and I could play them and all, but when I added them to my queue, it loaded for a few seconds and then an error message came up in the status screen with a little red exclamation mark. It said, "Error: No Data" My camera works fine with iMovie, but final cut won't work with it. HELP!

There are a number of different causes for the red exclamation mark. Please to a forum search and see if anything helps you.

Out of memory error on Final Cut Express

Hello,
Ok so quite often we have to record into iMovie6 live (on a Macbook Pro) so that we can get all the content being recorded without gaps (tapes don't last long enough). After the project is imported (and transfered to my Powermac with FCE on it) I would rather use Final Cut Express to edit everything. So after saving the iMovie project I start a new project in FCE and import the files from iMovie. When this happens the audio always needs rendered and often when I render these files it really bogs down my PowerMac G5 and eventually gives me an out of memory error. After looking at Activity Monitor during the rendering, the System Memory just starts to become inactive and then eventually active until all the memory is used. That's usually when I get the memory error in FCE. I have 1GB of memory and I've added another Gig but the result is the same. It appears this is a problem with the app. Anyone have a clue or any ideas? I am using Final Cut Express HD 3.0.1 on my PowerMac.
Thanks-
Adam

Thanks for the comments however I currently have a project that I am trying to get done and these comments don't help right now. Anyone have any advice to speed up the process?
I just need to render the audio faster without having to reboot all the time. Any other FCE project works fine when rendering audio, it's just the import from iMovie that for some reason soaks up my memory and causes me to have to reboot to get it back.
Thank you-
Adam

Final cut express error insufficient disk space to render.

I have my final cut express projects saved to external hard drives. When working on a project and I try to render the file I am receiving the error message of insufficient space to render but I have over 25 gigs on my external hard drive. I can save the file but not render it. I have tried restarting computer and hard drive but problem continues. Any suggestions? I only have 4 gigs of space on my internal hardrive.

Make sure System Settings is correctly set to the external drive. You do not have enough space on your system drive. It is heavily fragmented and likely to cause serious problems. You should keep about 10% or more of the system drive free for the OS to work with.

Final Cut express keeps crashing within 5 minutes of starting to render

Please help!
I am using Final cut express for this project. I created it on an Imac.
Specs: Quad Core; Intel Core I-7; 8GB Ram; 2.93 GHz. Media is stored on an external HD.
Whenever I select render timeline, the window appears and shows me the progress. But once I let it alone and leave the computer alone for anywhere from 3-10minutes, and I return, I am greeted with another window asking if I want to report this crash to Apple or reopen program. What on earth could be going wrong? I have used this imac before with no hassle at all when rendering, but for some reason, it doesn't seem to render be working now.
I have tried to render only a few minutes of the time line and it works okay without crashing, but when I select the 30minute project, it crashes within a few minutes.
I've tried a few things to try and identify the problem, but none of them have helped.
For instance, I completely turned off the screen saver. In the preferences, under power saver, I selected, computer sleep to "never"; Display sleep to "never"; I unchecked the "put the hard disk to sleep when possible."
And then I tried to only very small portion of the timeline. The results were as follows:
At around 5 minutes, the final cut crashes. I tried this process several times, and it seems to render up until the 5 minute limit and then crashes again.
Does anyone know what to do?
Any suggestions?

Hi Waldopert, and a warm welcome to the forums!
To find out which & how much RAM you can add we need this info...
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1
But more important is how much Free Space do you have on your Internal Hard Drive?

Error in playback within Final Cut Express HD

Similar Messages

Maybe you are looking for