Error in Playing long music tracks on Nokia 6220

When I play long music tracks (such as concert recordings up to 1-2hrs long) on my Nokia 6220, the phone does not remember were I had previously stopped listening to the track. Also the music player on the phone has troubles fast forwarding on long music tracks.
Anyone has a solution or remedy?
Ta

Unfortunately not, the standard S60 music player has no feature to save position in a track.
The video centre feature in some S60 3rd Eidtion FP2 phones like the N96 has the feature to play videos from where they last stopped, but even in these phone the music files don't have the same luck. It might be that this feature be added in the future, though it is probably considered that the music player is designed for individual music tracksrather than very long recordings, unlike video files where whole films are offered. Perhaps if enough people demand it...

Similar Messages

How can I play several music tracks back to back on an opening slide?

I want to place several music tracks back to back on an opening slide to entertain the audience prior to my start. On Power Point it’s easy but I have found it impossible in Keynote. Using the building inspector and setting stop/start cues just doesn't work, the music stops after build out of track 1. How to do I make the other tracks follow automatically?

There are a couple of ways to do this:
A. Using the Build Inspector (advantage: easy to do - disadvantage: takes a bit of set up & no fade-ins/fade-outs)
1. Place each of your audio files on the slide, select them all and in Build Inspector set all to "Start Audio"
2. Then open the Options Drawer in Build Inspector and select "Start Build Automatically"
3. Select the first audio file in the Build Inspector (I find this easier than guessing which icon is which), note that the audio file icon highlights, then go to Quicktime Inspector and note the duration of the file in seconds.
4. Return to the Build Inspector and select the second file, note that the icon is highlighted, then in the Options Drawer of the build inspector enter then number of seconds of the first files duration into the Delay box for the second file.
5. Repeat, rinse lather and repeat again for each audio file.
By doing the above you avoid having the files all start almost simultaneously and they will play in sequence. Be sure to listen for dead spaces before presenting to your audience and adjust delay times where needed.
NOTE: The maximum delay allowed is 60.0 seconds - if you have audio files longer than this you will need to either break the files into <60 seconds each or use B. below:
B. Use iMovie to create an audio track of all audio files. (Advantage: allows audio fades and overlaps, less math - disadvantage: takes time to put together and you need iMovie, too)
1. Create a single audio file as a .mov in iMovie and export it on to your slide.
2. Set the Start Movie in Build inspector and go.
Hope this helps.
Message was edited by: bwfromspring hill

Autor-Play multiple music tracks

Please help,
I would like to give visitors to my website the same music
experience as if they are listening to their CD player. In other
words, visitors can listen to multiple music tracks without having
to press play at the start of every new tracks. Just like a CD
player, visitor should be able to select the track that they want
to listen to, i.e. music tracks cannot be saved as a single file.
Thank you.

webamoeba wrote:
> Please help,
>
> I would like to give visitors to my website the same
music experience as if
> they are listening to their CD player. In other words,
visitors can listen to
> multiple music tracks without having to press play at
the start of every new
> tracks. Just like a CD player, visitor should be able to
select the track that
> they want to listen to, i.e. music tracks cannot be
saved as a single file.
>
> Thank you.
>
http://www.wimpyplayer.com/
chin chin
Sinclair

After moving files to new iMac, an iMovie project won't play audio music tracks

I bought new imac. Transferred files using target disk method and firewire - drag and drop. All files appear to have moved OK to new imac. But when I try to resume working on an imovie project that I had started on the old imac, the itunes music clips I dragged into a series of clips does not play the music, even though the green bar appears under the clips and the audio adjustments appear to be the same as in the old imac, which I still have. The audio that is "built in" to the original clips when the videos were made on the camera are still there and play. Help, please ? Thanks.

Hi
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named. com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
No of Colors - must be set to millions
Yours Bengt W

Error in playing purchased music

hello
after having moved all my music to my macbook some of my purchased tracks won't play in full length. on the laptop they simply skip to next track in the middle of the track and on my iPhone they just go quiet for the rest of the track's running time.
anyone knows about this problem?
thanks

Unfortunately not, the standard S60 music player has no feature to save position in a track.
The video centre feature in some S60 3rd Eidtion FP2 phones like the N96 has the feature to play videos from where they last stopped, but even in these phone the music files don't have the same luck. It might be that this feature be added in the future, though it is probably considered that the music player is designed for individual music tracksrather than very long recordings, unlike video files where whole films are offered. Perhaps if enough people demand it...

Error when playing purchased music

Hi,
When I try to play music purchased from the iTunes Music store, I get an error. I'm first asked to login to my Apple account, which I do without problem, but I then get a -50 error and the music doesn't play.
The same music plays fine on another computer. I have less than 5 computers activated to play.
What should I do? The computer where I get the error is a first-generation black MacBook and it has all the latest software versions (including OS X 10.4.10 and iTunes 7.3).
Regards,
fh

when i download a song i get error 9006 nothing helps ive done everything just like u whatever i do it still says error

Playing itunes music track from somewhere other than beginning

I would like a piece of music to play from a minute into the track, rather than from the beginning.
I thought setting it with the play control QT inspector would fix it, but the track still plays from the beginning. I tried setting a different start point in itunes and reimporting the track, but it still goes back to the beginning. And as it's a protected AAC file, I assume I can't trim it anyway.
Looking at other posts on similar topics, I thik the answer is going to be "you can't".

You could burn it to a CD, re-import the MP3 file (which makes it an uprotected file), and then edit is as you like using an audio editor like the freeware Audacity, or even QuickTime Pro.

My Apple TV 1st gen will now no longer play any of our iTunes music, although it shows a speaker symbol when you select play on the track. Please help?

My Apple TV 1st gen will now no longer play any of our iTunes music, although it shows a speaker symbol when you select play on the track. Please help?

Are you streaming or syncing you music? Sounds like you're streaming music directly from iTunes.
There can be many different issues. First, try power-cycling you wireless router (leave router disconnected for about 1 or 2 minutes) to refresh the wireless communication betweek both devices.
Make sure all software updates have been installed, for Apple TV and iTunes.

Recently bought a new computer and all my music appears in iTunes as well as on my computer in a saved folder. When I try to play the music in iTunes I get an error that reads"the song could not be used because the original file could not be found."

Recently bought a new computer and all my music appears in iTunes as well as on my computer in a saved folder. When I try to play the music in iTunes I get an error that reads"the song could not be used because the original file could not be found. Would you like to locate it?" Hope you can help me solve this issue.
Thanks,
Shellyboo

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Error Message (-208) -- Cannot play purchased music

After upgrading to itunes 6.0 I can no longer play my purchased music. The itunes store is telling me I am not authorized to play the song files, so I log into my account and it says authorization successful. After I click ok I receive the error message:
"We could not complete you Music Store request. An unknown error occurred (-208)."
I have tried uninstalling/reinstalling itunes, and have even tried downgrading to itunes 5.0. Itunes 5.0 wouldn't play the songs because it said I needed itunes 6.0 in order to play my music, and that I would have to upgrade.
I have also tried deauthorizing my computer and then playing the song again but I still receive the same error message.

Cross-posted from another thread.. This *WORKS*:
After having checked my other computer for what files had been altered or created this last day (during thich i had successfully authorized it for playback in preview and for purchased music) i found the file "SC Info.sidb" under "X:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\SC Info". This appears to hold your authorization keys or some other magic stuff. By deleting this files parent folder, iTunes was forced into asking me to authorize this computer again for playback, with the difference this time that there were some other options on the authorization dialog, just like there should be when for the first time authorizing a computer to play protected iTunes content. When I then entered my information as always and was expecting to see the same -208 error, i was instead greeted with sweet opera that I had been longing to listen to.
A minute or so later, I found this article on the net:
http://nslog.com/archives/2003/05/02/authorizingitunes_scinfo.php
It describes the same problem, but for users of macs, but the same principle applies to windows machines. The only thing fifferent is the paths to the key database. "I:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\SC Info"
Try the same procedure and hopefully your iTunes copy should work again. Just remember to make sure all iTunes related processes are shut down first before trying this. It might not matter, but that is what I did.

Nokia OVI Suite Error - Unable to read the tracks

I have puchased Nokia X6, which comes with unlimited music download. I have registered my PC with this subscription and downloaded music from the store.
However recently the Nokia OVI suite Software 3.0.0.290 gives a error on clicking the Music section - Operation Failed "Unable to read the tracks"

I have OVI Suite 3.1.1, and a Nokia 5230, which works with OVI suite only while there is no Micro SD card in the phone. This was the same with OVI 2, as well. WIth the card inserted, the /private/10208913 folder is regenerated every time the card is plugged back into the phone, and a "New Hardware Detected - MTP" message appears every minute or so, which also denies accessing the phone through windows explorer despite selecting the Mass Memory Mode. I've been unable to load any new music to the phone for months, despite countless retries.
I have win XP, and a crumbling confidence in Nokia. A tragedy that I have bought an X6 for the other half, which I have not had time to set up yet, and another 5230 for my father which was also several days toil of installs and reinstalls of OVI Suite and OVI Music on a Vista PC. Nokia OVI just seems like nothing but constant hard work, and what I could have earned in overtime would have paid for a much slicker product. Unless Nokia can sort this out, rather than relying on discussion groups to try to help user groups resolve what seems to be a flakey product, from my limited experience, I don't hold out much hope for this product line.

HT1351 The music tracks I have up loaded to icould shows up on my ios devices but I cant play them ? Has anyone had a similar problem / knows a solution.

The music tracks I have up loaded to icould shows up on my
ios devices but I cant play them ? Has anyone had a similar problem / knows a
solution.
The same tracks play fine on apple tv

Done that . Been using paid service for a long time . Works for all my content just not working for 3 albums I added recently .
they show up on all my devices But just can't play them . Any suggestions ?

Unable to play music in my Nokia 5800 XpressMusic,...

Dear All
My 5800 cannot playing a music, while I copied from Nokia Suite. Did I hard reset my 5800?
Thx.
Moderator's Note: We have changed the title into a subject-related title. This is to keep the forum organized and let other community users easily see and respond to this post.

Hi, angki.
Are you still encountering this with your phone? If yes, what exactly is happening when you tried playing thosemusics in your phone? Is there any error message appearing? Are those musics copied and pasted on your computer ripped from a disc? Or did you download them from a third party website? By the way, have you tried copying those musics to an SD card instead of transferring them to the phone via Nokia Suite?
Keep us posted regarding this matter for us to provide you further assistance. BTW, welcome to the community!

HT2479 In iMovie is it possible for the music track to run longer than the video?

In iMovie is it possible for the music track to run longer than the video? e.g. for there to be a short video clip playing during the intro to the song and then the song to continue to play in full once the video has finished?

Yes. Just drag your music in from iTunes or wherever and the timeline will auto increase to the full length of the music track. Like this:

ITunes will no longer play any music.

iTunes will open just fine, but when I click play on a song it won't play. The tracking icon won't move at all. I tried uninstalling and reinstalling itunes and the problem still stands. It started when I upgraded to the latest version of iTunes. Also, it does the same thing with CDs. iTunes won't play ANYTHING... HELP!

Are you streaming or syncing you music? Sounds like you're streaming music directly from iTunes.
There can be many different issues. First, try power-cycling you wireless router (leave router disconnected for about 1 or 2 minutes) to refresh the wireless communication betweek both devices.
Make sure all software updates have been installed, for Apple TV and iTunes.

Error in Playing long music tracks on Nokia 6220

Similar Messages

Maybe you are looking for