Error in PO as Input should be in the form of ___.___.__~,__V

Hi Experts,
One of my user can able to create a PO, but when he tries to change or display the PO in Me22N he observes the below error,
Input should be in the form of ___.___.__~,__V
Message No 00 088
Please help me to resolve this issue.
Further any inputs required from my side please revert back.
Cheers,
Kumar.S

Hello Kumar..
In user profile setting is made in such a way that as a decimal he is using ',' (comma) and to differenciate between 100 and 1000 place he is using '.' (dot)... so please ask user to enter tht form only...
however, it can bring to normal setting by running the T - Code /nSU3 (by user himself).. in new window there will be three tab pages one of them is Default.... go this tab page and see what no. system u want... comma as decimal and dot as differenciator between 100 and 1000 or dot as decimal point and comma as differenciator between 100 and 1000....
Please check it with user and let me know if you have any further query on the same.
Thanks And Regards,
Krupesh Kothari.

Similar Messages

  • Import Package:  The UNC path should be of the form \\server\share

    Just upgraded to 7.0 MS SP4.  Imports that worked last week are failing and throwing this error:
    The UNC path should be of the form
    server\share
    Tried modifying the apps, full process, etc.  This is just a standard Data Manager Import.
    Any suggestions????

    Hi,
    What is the SQL server used? Have you upgraded your SQL server also?

  • I get an error FRM-92101:There was a failure in the Forms Server

    I get an error FRM-92101:There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details, when i open the form
    it's a fresh installation for the oracle application 12.1.1 vis on linux redhat 5

    Hi;
    Please check below note:
    FRM-92101: There Was a Failure in the Forms Server During Startup After Fresh R12 Installation [ID 429627.1]
    R12 fresh install FORMS DO NOT LAUNCH - FRM-92101/500 [ID 427714.1]
    FRM-92101: Forms Server oracle.forms.net.ConnectionException: Forms session <1> failed during startup: no response from runtime process [ID 880088.1]
    Also check:
    Re: R12 database and JRE Issue
    Regard
    Helios

  • Forms 10g: error FRM-92101: There was a failure in the Forms Server during

    AS10g (9.0.4.1) on windows 2000 with 2 GB of ram
    We have an application with 10 - 15 users. Sometimes,when users exit from forms with the command exit_form, in a randomic way the form hangs with the error FRM-92101: There was a failure in the Forms Server during startup.....
    After the users have to close the browser and open another sessione of explorer.
    In the same time other users work fine.
    The problem happens more then 10 times a day.
    Is there a solution ?

    I have also run into similar problem.
    In my case, this problem has been carried over from Forms 6i to Forms 10g. In forms 6i it wrote an error file in the same folder where *.fmx file was stored.
    For 10gAS, look into <ORACLE_HOME midtier>\forms90\trace folder for a file *.trc. Open it up in notepad. It will tell you which trigger was being executed when the form failed.
    Put any comment in the PL/SQL of that trigger, recompile the form and the problem will go away.
    I usually put something like:
    dummy statement for FRM-92101.
    I do not know why it works but in my case it has.
    Good luck !!!
    Would like to know if it works for you.
    Suresh

  • How do I input my information on the form? It says that it is protected.

    I Downloaded a form and I can not input my information. It says that it is protected. How do I unprotect it?

    Can you post the link of the form?

  • R12.1.1 Error: FRM-92101: There was a failure in the Forms Server startup

    R12 version: 12.1.1
    Operating system: Oracle Linux
    I am getting this error, when I access the forms from any client M/C
    FRM-92101: There was a failure in the Forms Server during startup. This couls happen due to invalid configuration.
    Even I did: make -f ins_forms.mk install
    I restarted all the services. I found Form server also runnig.
    Processes in Instance: VIS_myerp.myerp.mydomain.com
    --------------------------------------------------------------+---------
    ias-component | process-type | pid | status
    --------------------------------------------------------------+---------
    OC4JGroup:default_group | OC4J:oafm | 23828 | Alive
    OC4JGroup:default_group | OC4J:forms | 26471 | Alive
    OC4JGroup:default_group | OC4J:oacore | 23663 | Alive
    HTTP_Server | HTTP_Server | 23606 | Alive
    adformsctl.sh: exiting with status 0
    I tested the Solutiuons beacon. It is working fine. SO there are no problems with java viewer.
    http://vis1211.solutionbeacon.net/forms/frmservletet?form=test.fmx
    Edited by: sk123 on Feb 17, 2010 8:48 AM
    Edited by: sk123 on Feb 17, 2010 10:15 AM

    Hi,
    I am getting this error, when I access the forms from any client M/CWas this working before? If yes, what changes have been done recently?
    FRM-92101: There was a failure in the Forms Server during startup. This couls happen due to invalid configuration. Please post the complete error message from the application.log file.
    Even I did: make -f ins_forms.mk install
    I restarted all the services. I found Form server also runnig.Did AutoConfig complete successfully?
    Regards,
    Hussein

  • Open pdf says "please fill out the following form" when I attempt to apply redactions, I get an error message.  How do I "turn off" the form portion of the document?  I assume that is the problem since I have not had this issue with any of the other files

    I am attempting to redact a large pdf file.  When I open the file, it has a bar across the top with the message "please fill out the following form".  I can mark redactions, but when I attempt to apply them I get a message saying, "In order to proceed Digital Signatures must be removed and the document must be fully authorized.  Do you want to make these changes and continue?"   I click "ok".  Then I get a message saying, "an internal error occurred."  How do I get around this problem?

    You cannot redact a signed document. This is because one of the things signatures guarantee is access to the OLDER document (i.e. there will be an unredacted copy in there).
    In general you cannot remove signatures, but sometimes you can. Look under the Signatures tab (right click on left vertical bar if there isn't one) to see if it is removable.

  • Error in SFP Transaction when trying to view the Form

    Hi all,
    ABAPer has build a form using Tx SFP --> Executed it and when he try to view the print preview or try to prnt, he is getting the following below error:
    Exception       SYSTEM_ERROR
    Message ID:          FPRUNX                     Message number:           001
    Message:
    ADS: The render error log file has been written to f:\u(200101)
    I have searched SAP Notes & other sites but it didnt help, Could you pls. help me out.
    Thanks,
    Subbu

    Hi Markus,
    When i tried the following link...http://<host>:<port> /AdobeDocumentServices/Config , i have seen a SAP portal so i m in a thinking that Adobe Document services are up and running..
    Could you pls. guide me if there is another way to check whether ADS is running? & are there any SAP Notes regarding this topic??i have been through 778479, 886572 but that didnt help..
    In the render error log files if i see it has displayed that NO ERROR REPORTED..
    Thanks,
    Subbu

  • Error in smartform printing where main data of the form is blacked out

    Hi Guys,
    I encountered a problem when printing my form. The main window is blacked out (not blank) but viewing it in SAP data are correctly displayed. The main window is a table. Hope you guys can help. Thanks a lot.
    Ian

    Sorry mate I thought it is SAPScript and giving solutions for SAP script now I realised it is SF, this could be one of the reasons...
    double click on main window and click on Output options tab at the bottom you will see saturation  under shading label, if it is 100% then it will black out your page try to set to 0%, for normal white display for grey shade keep 10 %
    I hope this will solve your problem.
    Regards,
    SaiRam

  • Decimal Error: Input must be in the format ___,___,__~.__V

    Hi Gurus,
    We have manual pricing in sales order. When i enter the price say, 0.405 USD/KG for a  material..sytem throwing an error msg..
    Input must be in the format ___,___,__~.__V
    I have maintained SU01, OY04, CUNI settings properly..and system allows me to enter 0.40 but not 0.405..
    Help me out to resolve this error..
    Thanks& Reg
    JJ

    If I am correct, in oy04, we can see USDN only and not USD.  Since I dont have access to SAP right now, not sure whether my understanding is correct.
    Nevertheless, you can maintain 4.05 USD /  10KG so that the net value will flow exactly in sale order / billing.
    thanks
    G. Lakshmipathi

  • HT3910 i did it all above. but it could not be installed. problems shows installer encountered error that caused the installation to fail. an unknown error occured. so now what should i do.

    i did it all above. but it could not be installed. problems shows installer encountered error that caused the installation to fail. an unknown error occured. so now what should i do.

    The above you are talking about refers to instructions for Snow Leopard (10.6) and you did post in the Snow Leopard forum area.
    Your system profile confirms you are actually using Lion (10.7.1).  Therefore, you should seach for Lion instructions in the Apple's Knowledge Base or post over in the Mac OS X v10.7 Lion forum area.

  • I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

    I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

    Reset the SMC, as per > Resetting the System Management Controller (SMC)
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    Then zap the PRAM/NVRAM as per > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.
    Then retry the Disc Drive.

  • Error - Developer Mode Exception : Lov Input should by default be the query

    How to get rid of this message?

    Full error message
    Lov Input should by default be the queryable criteria and Result

  • Error:Lov Input should by default be the queryable criteria and Result

    Hello,
    I have a LOV Which displays the Locations.It has 2 columns Location_id and Location_Name.This LOV is attached to a field named "LocationName".Requirement is to show the existing location name based on the location id of the employee that is queried before updating the employee details.
    The programatic Query property of the associated LOV map is set to True as i need to bind the query with the location_id at run time. However this gives me the following error message when the page is opened :
    Lov Input should by default be the queryable criteria and Result
    Can you please let me know what need's to be done?
    Regards,
    GayatriJ

    Normally you will get this error, when you didn't give LOV field as the criteria item in the LOV mappings.
    Check you have given the LOV field as one of the criteria mapping for the LOV.
    Thanks.
    With Regards,
    Kali.

  • Error message without blocking Input fields

    Hi,
    I want to display an error message in the selection screen. The error is for input date validation. But the once error displays in the status bar, it blocks the input fields in the selection screen. I want to display the error message without blocking any of the input parameter in the selection screen. Where should i write the code?
    Thanks in advance.
    Ezhil

    Hi Ezhilhrh
    I think you could have done a trial with different message types before posting this question.
    Please try with success message(Type - S) and DISPLAY LIKE 'E'.
    And also control the program flow using a flag or by checking the initiality of your internal table.
    Regards
    Hareesh Menon

Maybe you are looking for