Error in PO Distribution lines. cannot proceed with PO creation.

Hi All,
We have recently upgraded to R12 from 11.5.9 in Test environment. Due to upgrade all the purchasing setup which was there in 11.5.9 is now available in R12.
We are creating a Standard Purchase Order. I have entered the header & line level details. Now i am trying to update the shipment details. In the Shipments -> Distributions, I have updated the Requestor name & Deliver-to Now when i am trying to save the recod below error message is coming ->
ORA-24347: Warning of a NULL column in an aggregate function
FRM-40735: POST-FORMS-COMMIT trigger raised unhandled exception ORA-04098.
I cannot proceed with PO creation. Also, we are not selecting the subinventory. We were not selectingthe subinventory in 11i also.
Please guide.
Thanks in advance.
-Sujay

Thanks for the reply Sandeep.
Well i am thinking of this as a Triggger issue. We will recompile the trigger and will check once again.
Can you guide me if you have any idea on the PATCH details.
Thanks
-Sujay

Similar Messages

  • On a certain website, it says to click here to download plugin (Java). When executing the download, it says 'the installer cannot proceed with the current Internet Connection settings. I'm running 4.01. It was fine before the upgrade.

    On a certain website, it says to click here to download plugin Java Runtime Environment. I receive the message installer cannot proceed with the current Internet Connection settings. It was fine before the upgrade to 4.01. I have another PC that has IE on it and it works fine and again it worked fine until the upgrade to 4.01. I've done the off-line download but in Firefox it still says I need the plugin and still results in the installer cannot proceed with the current Internet Connection settings.

    You can install Java from here: http://www.java.com/en/<br><br>
    You also need to update your Flash installation since the one you have at the moment exposes your system to attack. It's a similar story for Adobe Reader.
    See:<br><br>
    * http://www.adobe.com/support/security/bulletins/apsb11-12.html<br><br>
    * http://www.adobe.com/support/security/bulletins/apsb11-08.html<br><br>
    Download from here:<br><br>
    * Adobe Flash: http://get.adobe.com/flashplayer/<br><br>
    * Adobe Shockwave For Director: http://get.adobe.com/shockwave/<br><br>
    * Adobe Reader: http://get.adobe.com/reader/?promoid=BUIGO<br><br>

  • Cannot proceed with delivery an existing transporter instance

    Hi I am facing this error ::cannot proceed with delivery an existing transporter instance

    Hello,
    Please take a look at the following post:
    http://blogs.msdn.com/b/sql_protocols/archive/2008/04/08/understanding-connection-forcibly-closed-by-remote-host-errors-caused-by-toe-chimney.aspx
    Possible solutions on the following thread:
    http://social.msdn.microsoft.com/Forums/en-US/e35d3f4e-5d9b-474e-9a9d-1e7cfcf5bd61/a-connection-was-successfully-established-with-the-server-but-then-an-error-occurred-during-the?forum=adodotnetdataproviders
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

    I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

    Please quote the exact error message, word-for-word, verbatim.
    What is your operating system?
    What version of Lightroom?

  • I cannot create a new business catalyst site with Dreamweaver CC 2014. The error message states that Dreamweaver cannot connect with server, try again later. How can I fix this problem?

    I cannot create a new Business Catalyst site with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with server, try again later. In addition, I am also unable to load remotely a previously created Business Catalyst site as it says there is something wrong with my username or password. However when I put my password in and press test connection, it says it has connected successfully. What is going wrong and how can I fix this problem?
    Thanks

    Hi Ozy08,
    Can you try the solutions mentioned in Re: Can't Login to Business Catalyst within Dreamweaver CS6?
    If you still have problems, and you have a purchased version of DW CC, send me your Adobe ID, location, and contact details over a private message. Click my picture and use the message option.
    Thanks,
    Preran

  • Can a Button call a java script and then proceed with the creation

    Hi all,
    I have a simple APEX form on a table,
    with simple function as create and apply changes,
    some items of the form are computed by a "Computation"
    I need the create button to show the computed values, before move to the next page, then proceed with the creation ( submission)
    I have tried to show the values by a java script, but after clicking the button OK of the javascript msg, no submission performed ,
    details:
    the java script is called in the URL of the Button,
    it only contains a alert statement
    is there a way to let the button do that
    or may be the case could be solved by another idea!!!
    rgrds,

    Hi Varad,
    It is Before header of course. I forgot to mention this.
    Yes, you are right Varad, I have read again the question and seems original request was to show Computation that is done in After Submit, more javascript is required of course.
    One possibility is to create On Demand process called COMPUTEITEM where you compute your item, and in the end of on demand process it prints it
    htp.p(:P1_X)
    Then put in HTML header of your page
    <script language="JavaScript" type="text/javascript">
    function setShowItemSub(pThis){
       var l_This   = $x(pThis);
       var ajaxRequest = new htmldb_Get(null, $v('pFlowId'),  'APPLICATION_PROCESS=COMPUTEITEM', $v('pFlowStepId'));
       ajaxRequest.add($x(l_This).id, $v(l_This));
       var gReturn = ajaxRequest.get();
       alert(gReturn);
       ajaxRequest = null;
      doSubmit('aa');
    </script>And in Button URL textarea put:
    javascript:setShowItemSub('P1_X');
    Then no need in After Submit process anymore
    I have put this now in http://apex6.revion.com/pls/apex/f?p=225:1
    COMPUTEITEM On demand process is :
    :P1_X := :P1_X || ' Added this trail';
    htp.p(:P1_X);Of course, all this should be modified accordingly
    Regards,
    Oleg

  • HT1222 I was trying to run ITunes 10.7 update on my Mac Pro with Retina display but the message appeared "An error has occurred" so I can proceed with the update. I dont' see any other messages. Any ideas what could go wrong?

    I was trying to run ITunes 10.7 update on my Mac Pro with Retina dispaly but "An error has occurred" and I was not able to proceed with the update. The message says "The operation was cancelled. (3072)." I have no other messages. Any ideas why I cannot install this update

    Scott's solution fixed the problem.  It would have been helpful if the update message in the App Store had reported that.  I had first tried B Noir's solution -- and received a helpful warning message that a guest user was still logged in to iTunes.  I switched over, logged the guest user out, switched back and the update within the App store worked perfectly.
    It seems to me that Apple should invest a little time and effort in making their error/warning messages easier to decipher.  I have to come to the forum every time something happens.  Why not simply have a dialogue window that opens up to explain the most likely issues?

  • Error during recovery -- Windows installation cannot proceed

    I have a Satellite A355-S6925, and I tried to reset my computer by pressing 0.  Now I'm getting this error.
    The computer restarted unexpectedly or encountered an unexpected error.  Windows installation cannot proceed.  To install Windows, click "OK" to restart the computer, then restart the installation.
    Now what?  If I click OK, it just ends up back at the same error.

    Never mind, I got it.  I just held 0 again to start it over.

  • Mac install "Error- Cannot Proceed With Installation". Clean install doesn't work.

    iMac 2.7 Ghz Intel Core I5
    RAM: 16GB 1333 MHz DDR3
    1TB, 750GB Free
    OSX 10.7.5
    Had flash problems in Safari and Firefox.
    Regular flash update made no difference.
    Tried clean install procedure per: thread http://forums.adobe.com/message/5565773
    Tried downloading and running flash uninstaller for Mac.
    Restarted computer every time.
    Still get this error when attempting to install Flash:
    Any ideas?  Thanks in advance. 

    Hello,
    Welcome to Adobe Forums.
    You may download offline installer for Adobe Flash Player 11.8 from here : http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg
    Thanks,
    Vikram

  • CJ88 Cannot proceed with FUL settlement to Final asset

    We have a PO with WBS as account assignment. Users posted a down payment to this PO in 12/2010 and when they ran the settlement Type 1 (Automatic) it posted a DP posting to the AUC transaction type 180.
    In Standard SAP transaction, this will get reversed if the users post the invoice and executes CJ88 again.
    Now, our problem is that, the invoice was not posted until now, and the DP is still open in the AUC. THey want to do  settlement to the final asset but is getting an error CJ88 type 3 (FULL)
    *ORIGINAL Error:* You cannot post comp. retirement for asset 102000121 0 with this trans.type
    Message no. AA341
    Diagnosis
    A down payment was posted to asset 102000121 0. In depreciation area 01, if not elsewhere, all down payments were not cleared.
    Procedure
    Before posting a complete retirement on this asset, you have to first clear the down payment in all depreciation areas.
    FY 2010 is now closed in asset. I tried posting an ofsetting entry for the DP on FY2011. I used ttype 181. I tried to re-setlle type 3 (FULL) but now, the error message refers to Area 32
    *AFTER POSTING TTYPE 181:*You cannot post comp.retirement for asset 102000121 0 with this trans.type
    Message no. AA341
    Diagnosis
    A down payment was posted to asset 102000121 0. In depreciation area 32, if not elsewhere, all down payments were not cleared.
    Procedure
    Before posting a complete retirement on this asset, you have to first clear the down payment in all depreciation areas.
    Our Dep area 32 is configured to take values from 01 but reflect it in USD and it is set to AREA NOT POST.
    Does anyone have any thoughts why the system is checking area 32 if its deriving values from 01?
    Additionally, how can i clear the DP in 2010, with a posting in 2011 and be able to execute the settlement to final asset.
    Thanks

    Hi,
    Please review the note 35309.                                                                               
    As the long text of the error suggests, the cause for this error is  most likely down to downpayments which are not yet settled.                                                                               
    In general the settled down-payments and their clearings should be balanced to ZERO in the settlements.
    In investment measures with summary settlement you will always get  the error AA341, if the down-payment balance is not zero.
    Regards Bernhard

  • Cannot proceed with installing Lion on an external drive

    Hi everyone,
    I have a late 2008 MacBook Pro, 10.6.8 installed. I'm trying to install Lion on an external HDD connected via an ExpressCard/SATA adapter. The target HDD has GUID table with a single partition containing a couple of regular folders (no OS installed). I boot up my Snow Leopard OS, run the Lion installation, choose the external HDD and it starts the installation with no warnings.
    Then when the progress bar reaches the end, I'm told to close all applications and restart. After the restart I'm suddenly booted to my old Snow Leo. I see a Mac OS Install Data folder on the external drive, but I cannot boot off it and cannot continue the installation.
    I have a suspicion that the problem might be that I haven't formatted the drive and it contained some data when I started the installation, but I doubt this is the cause. I don't want to format the drive because it contains some necessary data.
    If anyone encountered anything like that, please describe your cases.
    Thanks a lot

    Hi. Thanks a lot for the quick response. I bought Lion on the App Store but it's not downloading. It says "Waiting..." and has now for ten minutes. It's also trying to download the update to another app and it's saying "Waiting..." for that one too. Not sure what to do or what is going wrong.
    Okay, just now the download started working. I would delete this reply but I don't see how to do it.

  • Error message in Command line (cannot mount database in EXCLUSIVE mode)

    Hello Experts
    I'm new in Oracle and trying to connect to my database though SQL command line. After I login as SYS I user I get the message that 'connected to idle instance'. Then I use “STARTUP” to connect to database. Now from my understanding it should mount the database and open it as well. But it does'nt happens.Instead I get the message 'cannot mount database in EXCLUSIVE mode' . I'm not sure why it can't mound the database and what should I do to make it working. Please can somebody show me how to make it working again. Here are the details about my problem
    Enter user-name: SYS as SYSDBA
    Enter password:
    Connected to an idle instance.
    SQL> startup
    ORACLE instance started.
    Total System Global Area 595591168 bytes
    Fixed Size 1220748 bytes
    Variable Size 301993844 bytes
    Database Buffers 285212672 bytes
    Redo Buffers 7163904 bytes
    ORA-01102: cannot mount database in EXCLUSIVE mode
    Thanks a lot in advance.

    Thank you so much for both of you. I've checked everything. All looks fine to me and then i tried to connect though SQL and it worked. Now what I've notice that this time I didn't start Enterprise Manager only I started the listner and then start sql it worked. Does this means that I can't use both SQL and EM at a time together?

  • When i try to upgrade iPad, i cannot proceed with terms and conditions page

    i forgot my apple ID password when i after i upgrade my ipad. So i changed reset my password online. After i entered new password, terms and conditions page appeared, however there was no response no matter what option i choose be it agree, disagree or A and B.
    maybe i accidentally disconnected my ipad with my Mac air at that time? I was not paying attention to that. now i dont konw what i can do.
    i do not know the version of the previous system. however i updated as it pompted up that there is a new update.

    Reset iPad and continue with update.
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • HT1918 hi, i used to live in the states, since 7 years ago came back to my country Ecuador, I wuold like to change my payment info but since I have $0.08 cents in my account I cannot proceed with the changes..please help.

    hi there, i need help with my itunes acrcount, i used to live in the States but I cambe back yo my country seven years ago (ecuador).  Now i would like to change my account info but I can't, because I have $0.08 cents and i need to clear that balance to chance my info payment...but there's nothing i can but for $0.08 cents and obviously I don't have a credit card with a Unite States address please help meeeee!!!

    Try contacting iTunes support and see if they can remove the balance from your account : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • Cannot proceed with payment in Windows Dev Centre

    Hey there, I'm facing some issues in verifying my user status.
    I tried the payment through DreamSpark account: 
    1. In the Get verified through my school option I can't see name of my school situated in
    Ghaziabad, India.
    2. And how to get a verification code? Where do I get a Microsoft representative or what should ask my school authorities?
    Thanks,
    Kvaibhav01.

    Try contacting iTunes support and see if they can remove the balance from your account : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Maybe you are looking for

  • Cds and dvds not being "seen" by itunes

    i recently restored my c drive to fix dragging in my audio. i reinstalled itunes and reloaded all my files. now, when i insert a cd, the window that pops up with my playing options does not list itunes. everything plays fine in wmp and vaio zone. itu

  • Will Bootcamp run on a Macbook Air?

    I'm planning to buy a Mac laptop for my wife. She needs to use Windows (yuk). I'm considering a Macbook Air. Will I be able to run Bootcamp?

  • FIDCC2, filling COPA segment?

    Hello, I am working on a FIDCC2 interface from a SAP system to another. The account document is send to another SAP system when releasing the invoice. The interface works perfect and bookings are made in the other system. But in the receiving system

  • ITunes 11 (there's one thing i don't like)

    I like how the new iTunes looks (Version 11) but there's no thing i don't like? In the -Tv Shows- i don't like when my Tv Show SEASONS/EPISODES are in ONE ALBUM, i only like when the Tv Show Seasons are in there own Album. with there own Season art c

  • Can I stream e mails from iPad to TV using Apple TV

    Can I stream e mails to a TV using iPad and Apple TV. I do not want to use TV as keep board only for visual purpose.