Error in PO printing

Hi,
I have congifured my Z layout and Z program  in NACE.but when i am trying to view the print preiew there is no response .
and if i am trying to run the driver program only then m facing an runtime error as:
Error at assignment: Overwritten protected field.
saying  A new value is to be assigned to the field "RETURN_CODE", although this field
  is
entirely or partly protected against changes.
I have developed the logic for return code as this
FORM entry_neu USING return_code us_screen.
  DATA: lf_retcode TYPE sy-subrc.
  xscreen = us_screen.
  PERFORM processing USING lf_retcode
                            us_screen.
  IF lf_retcode NE 0.
    return_code = 1.
  ELSE.
    return_code = 0.
  ENDIF.
ENDFORM.
could any body just me,what should i do on this regard.?

Hi,
Please check your FORM and PERFORM statement.
You are passing the parameter 'RETURN_CODE' as USING parameter and trying to change it in the statements like
return_code = 1 and return_code = 0.
Please use it as CHANGING parameter and check if your error is solved.
Regards,
Sagar

Similar Messages

  • I cannot print from Websites or my college online course. Tries to save files to desktop as an .xps document but nothing happens and I get an error message that print command did not work. Have reinstalled firefox and adobe, no help. Any suggestions?

    Cannot print anything from internet using Firefox as browser. Please advise. I have to use Firefox for internet college courses, cannot print my assignments. I do not have this problem on Mac or using Internet Explorer. Only happens when using Firefox. When I select print a message comes up to save information to desktop as .xps file. Select save, sometimes it is on the desktop but I cannot open the file or it simply does not save file and get an error message that print command failed. What is happening?

    {Ctrl + P} and select your printer in the Printer - Name box near the top of that window.
    http://kb.mozillazine.org/Problems_printing_web_pages

  • When I try to print from web page I get "printer not activated - error code 30", printer works on Internet Explorer

    When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.

    What does that error message say?
    See this: http://kb.mozillazine.org/Problems_printing_web_pages

  • Error on server - printing stopped - Very First request to print any report

    vs2010 sp2
    CR13 sp1
    CR12 developed reports requested in app with no mods
    I'm getting there but I can't get the very first print request honored regardless of
    size to print on the very first request but will print when re-requested.
    A very large detailed report (+300 pages) errors as well.  The running time is
    over 1 hour from rendering to print.  The printing starts to spool but errors.
    I've caching, sessions to keep the large report alive.
    I have also increased timeout on the server.
    Thanks,
    Isaac

    Is is a website/web app
    I found the following which makes sense in relation to initial prints etc.
    Can you or someone tell me where to make this change in II6
    which we are using on the sql server 2000 box (initially I was was told it was 2003)
    ActiveX printing fails in the .NET web form viewer when IIS GZip Compression is in use. As a result, the following error message appears:
    "A Communication Error Occurred. Printing will be stopped".
    Cause
    This is a known issue with Crystal Reports .NET. This issue has been assigned Track ID ADAPT00459349. At time of writing, there are no file updates to resolve this issue.
    Resolution
    To work around this issue, do one of the two suggestions offered below:
    Disable compression for the following mime types:
    application/x-eor (end of report)
    application/x-ack (acknowledgement of printing finishing)
    application/x-epf (encapsulated page format)
    -OR-
    Use HTTPZip instead of GZip for compression.
    Thanks,
    Isaac

  • Error message on print window for Vista--"out of paper"--I just loaded paper...?

    error message on print window for Vista--"out of paper"--I just loaded paper...?
    What can I do to get it to print?

    hi there,
    could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model can help out a lot.
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Error while installing printer software for HP Photosmart Plus 209a-m on Windows 8.1 64 bit OS

    I am getting below error while installing printer software of HP Photosmart Plus 209a-m on Windows 8.1 64 bit OS. Can you please help me resolve this error? Thanks in advance.

    Hi tarunkw,
    Follow the steps below and check if that resolve the issue:
    1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
    Now try reinstalling the HP Software and check if the installation goes as expected.
    If the issue persists continue following the next steps below:
    2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
    3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
    4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
    5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
    6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
    7. Run the installation file and check for any difference.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Can no longer print from Photoshop CS^ have upgraded drivers error message reads There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."

    I have upgraded my iMac to Yosemite but now my two Canon Printers no longer print from Photoshop CS6. I have upgraded the drivers. All other applications including Lightroom are fine. I am receiving an error message as follows:"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." How can I get the OS to return a list of printers to Photoshop when Photoshop requests a list.

    Have you printed to this printer from 10.10 before?  If so, check your connections.

  • Error message when printing Sales Order

    Hi,
    I get following error message when printing out a sales order just created.
    No matching records found 'Document' (RDOC) (ODBC-2028) (Message 131-183)
    Logged in as super-user, posting periods is unlocked. It is a new company just created. With sand-box company no errors-it prints properly to same printer.
    What could be the problem?
    Thanks,
    Ajay Audich

    Have you tried with system PLD?
    Thanks,
    Gordon

  • Error message "The printer requires Interventi​on" on Windows 8.1

    I have Windows 8.1 and get an error message every time I send a print job.  The jobs just sit in the print queue.  The message says that intervention is required.  We are using the wireless option.  We have other computers that run Windows 7 and they are NOT having this problem.  Has anyone else run into this issue?  Does anyone know how to fix it?  I have tried unistalling and reinstalling already.

    Hello there @AndyG74 
    Welcome to the forums!
    I understand you are running Windows 8.1, and when you send a print job, you are seeing an error and the print job sits in the print queue, without printing it out. As your Windows 7 systems run and print fine, this would seem to be more of a software problem with the Windows 8.1 system and not the printer hardware.
    My suggestions to you, would be to try running the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results. Please save a screen shot of the results and post them back for me to review.
    Also, try printing from Notepad and let me know if that works.
    If the printing issue seems to be solely within one program, include that information too!
    Thank you,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Error during COA print out from QC21

    Hi All.
    I am facing an error during COA print out form Trx.QC21.
    The error along with it's diagnosis is paster here.
    Message no. QC138
    Diagnosis
    No data is printed for batch number A070030 material 000000000550000063 , plant 1001.
    This can be caused by the following:
    Not all data was found for a characteristic in the certificate profile that is marked as obligatory.
    No requested data was found for any characteristic in the certificate profile.
    System Response
    The creation of the certificate profile is canceled.
    If the certificate is for a delivery item, the status of the message is set to Incorrectly processed.
    I have:
    Created the profile
    Assigned the material to it.
    The same MICs are maintained in the I.Plan, Lot, Profile.
    The profile is released.
    Pls HELP!!!!!
    With Best Regards,
    Shyamal Joshi

    Hi Shymal,
    after reading above thread i tried the cycle and succeed only thing i used MIC as ref. char.
    just ensure following thingsss.... i wil suggest u try with new data
    i wil brief with T_code for other reader also.
    1. activate material  with batch mangt. (MM01)
    2. create Batch wrt above above matl. (MSC1)
    3. create Char (CT04)
    4. create class (Cl02)
    5. create MIC with class char. (QS21) (i think here u used copy model MIC)
    6. create cert. profile (QC01 with above MIC)
    7. assign matl. to above cert. profile (QC15)
    8.Create Insp. Plan (QP01 with above MIC only)
    9.create insp. lot (auto or QA01)
    10.Do RR, UD (QA32) click on cert. (OR QC22) view Print preview by giving proper inputs.
    hope this wil help.......
    SANTOSH KAMBLE

  • There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents. Error message in PhotoShop CC

    Printing from PS CC worked fine today. I made no changes to preferences. In between working with 2 projects, the first one printed fine, the second gave me this Error Message.
    There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
    Now I've checked for updates for my printer, reset my printer, reset PS CC preferences, picked my printer as Default and Last Used, and rebooted. I've followed all the recommended fixes for this issue I could find here and on the internet. I can print fine from any other program. Alas, the error message keeps popping up and I can't print.
    PS CC is up to date
    Running OS 10.10.2
    HP Printer updated
    Help?

    Have you printed to this printer from 10.10 before?  If so, check your connections.

  • InDesign CS3 Print Engine Error and Corrupt Print Dialog Box

    We are a networked office working on various files off of a server. After setting print settings in the print dialog box and saving the file, when another user (or the same user) reopens the file, the Print dialog box settings are changed in a bizarre, corrupted way, and the file will not print. We get the following error:
    Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem.
    and printing fails to the HP LaserJet 4240 PS (64 MB RAM).
    We all use Windows XP, SP2, Dualcore 3 GHz Pentium Processors with 3.5 GB of RAM.
    Specifically, the Print dialog box shows these strange settings:
    Scaling gets set to 0%, copies are set to 0
    Spreads are turned on
    Print Visible Guides and Baseline Grids are turned on
    All printers marks are turned on, offset is set to 0
    Use document bleed settings is turned on, include slug area is selected
    Output Text as Black is turned on
    Omit for OPI has all 3 file formats selected (EPS, PDF, and Bitmap)
    Usually resetting the Print dialog box and saving the file allows us to print but then the next time we open the file, the Print settings are corrupted again.
    Any solutions? Or any fixes in the works?
    Thanks for your help!

    We currently only notice this problem with files associated with one project. The project is a book of many chapters, each with it's own file. The problem affects multiple files and multiple users (4 out of 5 people working on these files have experienced the problem). It may very well be a problem caused by a different user opening the files after another has closed them.
    We have a LAN with multiple Dell servers running Windows 2003 and many end-user PCs using Windows XP. All printers are on the network but printing occurs locally, meaning that data sent to a printer does not go through a server.
    We could test the problem by copying a chapter to one person's computer and making them the only person who works on it for a day or two. It's just hard to do so because different people have different duties to perform on all files.
    Thanks for your help!

  • Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop  After restart error message appears:  - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

    PROBLEM: Cannot print from Photoshop
    After restart error message appears:
    — “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
    • All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
    The printer printed fine until about 2 weeks ago when this error message appeared.  Printing continues from Pages, I-photo, preview etc. —  only Photoshop fails.
    The printer has been turned on and off, as have open documents been closed and open etc..   Preferences reset.  Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
    Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
    Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
    Attempting unsuccessfully to print to Epson 3880
    What Adobe support will be of help.
    Robert Darling —  2/19, 20, 21,22,23/2015

    Probably best to ask in Photoshop General Discussion
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Received error 1920 service print spooler failed to start verify that you have sufficient privileges to start system services

    In installing Adobe XI Pro this error message was received "error 1920 service print spooler failed to start verify that you have sufficient privileges to start system services". What does this mean and how can I get this installed?

    It very much means what it says - you do not have sufficient administrative privileges and something on your system is blocking the (virtual) PDF printer driver from being installed.
    Mylenium

  • Error while check printing through f-58

    Error while check printing through f-58 is showing following  for company code xxxx
    1. Fiscal year variant z4 not defined or maintained for date 01/06/08 .
    (Fiscal year variant Z4 not defined or maintained for date 01/09/2009
    Message no. GMMASTERDATA108)
    2.the payment made is not recorded in the SAP system.
    when you see the print preview of check then in plase of amount and invoice date its showing as
    Kindly refer tthe payment advice for the invoce details.
    Is there any solution to this?
    Regards,
    Yojana.

    Hi,
    i have check periods are open till 2010.
    and parameters for fiscal year variant are also correct.
    In FBZP i have check configuration there is no prob in it.
    any solution on this?
    Regards,
    Yojana.

  • Acrobat 8.1.7 -- Error 1920.Service Print Spooler?

    I have a valid key on an installed version of Adobe Acrobat 8.1.7. (AA8 Standard installed on a XP system) 
    It fails to create a PDF document and the Error 1920 apprears before it shuts down.
    When, per representative suggestion, I attempt to uninstall it and then re-install with the valid key, it then reports:
    Error 1920.Service Print Spooler (Spooler) failed to start.  Verify that you have sufficient priviledges to start system services. 
    I verified that I have a valid key on My Adobe using my email address, etc. 
    But I see no way out of this 'dead end'.  
    After attempting to remove or repair the installation in add/remove programs, I get the support info: 
    Adobe Acrobat 8.1.7 - CPSID_50029
    But when I go there I see nothing that tells me how to fix the problem.
    How do I unstall and re-install this so I can continue to use my AA8 on my XP system? 

    David:
    I found that helpful input, yes.
    The tech I spoke with told me to use a cleaner program to force erasure so
    I could reinstall it.
    He failed to tell me that you better be sure you have your original disk,
    because you can't download AA8 via a web.
    The best solution is to upgrade, which I would be more likely consider if
    some consideration were given for all the headaches of trying to get AA8
    back up and running.
    The principal being "If you can't make what I already have work, why should
    I pay for your update?"
    I will continue to look for the disc and let you know how that goes....
    Dave

Maybe you are looking for