Error in po raising

While raising purchase order in SAP as I am getting error :"Vendor`s/manufacturer`s QM system only valid to 30.06.2010"
can anyone suggest the solution

It means vendor/Material QM info record date is past .
Go to transaction QI02 ,Check the date in inspection control tab and change the date to valid date.
Your problem will be solved

Similar Messages

RSDRO: Error RSAODS 131 raised

Hello everybody,
I'm trying to load an ODS and an infocube from 0HR_PE_1 infosource. The infocube load has finished OK however the ODS load fails. The error in sm21 is:
> RSDRO: Error RSAODS 131 raised
> RSDRO: 1: 2: 3: 4:
In the ODS activatiion job log this is the error message:
SIDs determined successfully for request REQU_409UW9ZYBZI1GXNALPCW1RXOU from ODS object ZHRODEV1
Request REQU_409UW9ZYBZI1GXNALPCW1RXOU, data package 000001 incorrect with status 5 in rsodsacstreq
Request REQU_409UW9ZYBZI1GXNALPCW1RXOU, data package 000001 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
No confirmation for request ODSR_408PAA6WYNTHQ2UK0Z1ZBB1OU when activating the ODS object ZHRODEV1
Error while exporting data
System error occurred (RFC call)
Errors occured when carrying out activation
Analyze errors and reactivate if necessary
Activation of data records from ODS object ZHRODEV1 terminated
Can somebody help me?
Thanks in advance and happy new year.
Regards,
Elena

These are monitor logs, (I have tried to paint legend, red buttons are marked with E:, green buttons are marked with OK:)
OK:Activation of data records from ODS object ZHRODEV1 started
E: Activation of data records from ODS object ZHRODEV1 terminated
E: System error occurred (RFC call)
E: Request REQU_409UW9ZYBZI1GXNALPCW1RXOU , data package 000001 incorrect with status 5
E: Error while exporting data
E: Request REQU_409UW9ZYBZI1GXNALPCW1RXOU , data package 000001 not correct
E: Inserted records 1- ; Changed records 1- ; Deleted records 1-
OK: SIDs determined successfully for request REQU_409UW9ZYBZI1GXNALPCW1RXOU from ODS object ZHRODEV1
OK: Errors occured when carrying out activation
OK: Analyze errors and reactivate if necessary
OK: Data to be activated successfully checked against archiving objects
E: No confirmation for request ODSR_408PAA6WYNTHQ2UK0Z1ZBB1OU when activating the ODS object ZHRODEV1
OK: Activación is running: Data target ZHRODEV1 , from 37.577 to 37.577
Thanks again,
Elena

ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating pr

I'm running Oracle 11gR2 with ASM configuration on LINUX 5 and I noticed the following errors in the alert log. Any ideas.
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 30988
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 30572
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 32040
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 32179
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 29693
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 30350
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 30483
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 30963
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 29907
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 29962
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 31000
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 29988
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 30983
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 31900
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 32171
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 29901
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 30456
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 30475
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 30069
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 30899
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 30403
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 30540
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 29650
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 30550
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 30236
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 29673
Tue Oct 18 14:10:51 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 30888
Tue Oct 18 14:10:52 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 30090
Tue Oct 18 14:10:52 2011
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 29638

this is what i'm getting in the asm alert.log
Tue Oct 18 15:34:05 2011
Errors in file /opt/bsaitmod/oracle/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_ora_6938.trc:
ORA-27070: async read/write failed
WARNING: IO Failed. group:0 disk(number.incarnation):7.0xe96844c9 disk_path:/dev/random
AU:0 disk_offset(bytes):0 io_size:4096 operation:Read type:asynchronous
result:I/O error process_id:6938
Tue Oct 18 22:08:15 2011
Errors in file /opt/bsaitmod/oracle/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_ora_18992.trc:
ORA-27070: async read/write failed
WARNING: IO Failed. group:0 disk(number.incarnation):7.0xe96844c9 disk_path:/dev/random
AU:0 disk_offset(bytes):0 io_size:4096 operation:Read type:asynchronous
result:I/O error process_id:18992
Tue Oct 18 22:08:15 2011
Errors in file /opt/bsaitmod/oracle/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_ora_18994.trc:
ORA-27070: async read/write failed
WARNING: IO Failed. group:0 disk(number.incarnation):7.0xe96844c9 disk_path:/dev/random
AU:0 disk_offset(bytes):0 io_size:4096 operation:Read type:asynchronous
result:I/O error process_id:18994
Tue Oct 18 22:08:16 2011
Errors in file /opt/bsaitmod/oracle/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_ora_18998.trc:
ORA-27070: async read/write failed
WARNING: IO Failed. group:0 disk(number.incarnation):7.0xe96844c9 disk_path:/dev/random
AU:0 disk_offset(bytes):0 io_size:4096 operation:Read type:asynchronous
result:I/O error process_id:18998
Tue Oct 18 22:08:18 2011
Errors in file /opt/bsaitmod/oracle/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_ora_19002.trc:
ORA-27070: async read/write failed
WARNING: IO Failed. group:0 disk(number.incarnation):7.0xe96844c9 disk_path:/dev/random
AU:0 disk_offset(bytes):0 io_size:4096 operation:Read type:asynchronous
result:I/O error process_id:19002
Wed Oct 19 09:28:54 2011
Errors in file /opt/bsaitmod/oracle/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_ora_8389.trc:
ORA-27070: async read/write failed
WARNING: IO Failed. group:0 disk(number.incarnation):7.0xe96844c9 disk_path:/dev/random
AU:0 disk_offset(bytes):0 io_size:4096 operation:Read type:asynchronous
result:I/O error process_id:8389
Wed Oct 19 09:41:31 2011
Errors in file /opt/bsaitmod/oracle/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_ora_9608.trc:
ORA-27070: async read/write failed
WARNING: IO Failed. group:0 disk(number.incarnation):7.0xe96844c9 disk_path:/dev/random
AU:0 disk_offset(bytes):0 io_size:4096 operation:Read type:asynchronous
result:I/O error process_id:9608
Wed Oct 19 09:46:05 2011
Errors in file /opt/bsaitmod/oracle/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_ora_9608.trc:
ORA-27070: async read/write failed
WARNING: IO Failed. group:0 disk(number.incarnation):7.0xe96844c9 disk_path:/dev/random
AU:0 disk_offset(bytes):0 io_size:4096 operation:Read type:asynchronous
result:I/O error process_id:9608
Wed Oct 19 09:46:17 2011
Errors in file /opt/bsaitmod/oracle/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_ora_9608.trc:
ORA-27070: async read/write failed
WARNING: IO Failed. group:0 disk(number.incarnation):7.0xe96844c9 disk_path:/dev/random
AU:0 disk_offset(bytes):0 io_size:4096 operation:Read type:asynchronous
result:I/O error process_id:9608

Unrecoverable error ORA-15032 raised in ASM I/O path;

Hi,
DB :11.2.0.1
OS :Aix6
We getting the following error in alertlog.We using asm.
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 38273676
1* select name, header_status, path from v$asm_disk
ITSEL-SQL> /
NAME HEADER_STATU PATH
ITSEL_ARCHGROUP01_0000 MEMBER /dev/ITSEL_ARCH_DISK1
ITSEL_ARCHGROUP01_0001 MEMBER /dev/ITSEL_ARCH_DISK2
ITSEL_ARCHGROUP01_0002 MEMBER /dev/ITSEL_ARCH_DISK3
ITSEL_DATAGROUP01_0000 MEMBER /dev/ITSEL_DATA_DISK1
ITSEL_DATAGROUP01_0001 MEMBER /dev/ITSEL_DATA_DISK10
ITSEL_DATAGROUP01_0002 MEMBER /dev/ITSEL_DATA_DISK11
ITSEL_DATAGROUP01_0003 MEMBER /dev/ITSEL_DATA_DISK12
ITSEL_DATAGROUP01_0004 MEMBER /dev/ITSEL_DATA_DISK13
ITSEL_DATAGROUP01_0005 MEMBER /dev/ITSEL_DATA_DISK2
ITSEL_DATAGROUP01_0006 MEMBER /dev/ITSEL_DATA_DISK3
ITSEL_DATAGROUP01_0007 MEMBER /dev/ITSEL_DATA_DISK4
NAME HEADER_STATU PATH
ITSEL_DATAGROUP01_0008 MEMBER /dev/ITSEL_DATA_DISK5
ITSEL_DATAGROUP01_0009 MEMBER /dev/ITSEL_DATA_DISK6
ITSEL_DATAGROUP01_0010 MEMBER /dev/ITSEL_DATA_DISK7
ITSEL_DATAGROUP01_0011 MEMBER /dev/ITSEL_DATA_DISK8
ITSEL_REDOGROUP01_0000 MEMBER /dev/ITSEL_REDO_DISK1
ITSEL_REDOGROUP01_0001 MEMBER /dev/ITSEL_REDO_DISK2
ITSEL_REDOGROUP01_0002 MEMBER /dev/ITSEL_REDO_DISK3
ITSEL_REDOGROUP01_0003 MEMBER /dev/ITSEL_REDO_DISK4
ITSEL_REDOGROUP01_0004 MEMBER /dev/ITSEL_REDO_DISK5
FORMER /dev/ITSEL_DATA_DISK9
21 rows selected.
Any suggestions
Thanks & Regards,
VN

Hi,
Thanks for your reply.
We didn't find any other messages with this error.
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 41680928
Fri Jul 13 23:59:52 2012
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 38470370
Fri Jul 13 23:59:53 2012
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 12779594
Fri Jul 13 23:59:53 2012
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 45482250
Fri Jul 13 23:59:53 2012
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 31064664
Fri Jul 13 23:59:53 2012
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 43123026
Fri Jul 13 23:59:53 2012
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 42598544
Fri Jul 13 23:59:53 2012
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 35914194
Fri Jul 13 23:59:53 2012
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 8913722
Fri Jul 13 23:59:55 2012
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 34603716
Fri Jul 13 23:59:55 2012
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 14024824
Fri Jul 13 23:59:55 2012
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 36176216
Fri Jul 13 23:59:55 2012
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 56033500
Fri Jul 13 23:59:55 2012
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 45940938
Fri Jul 13 23:59:55 2012
ERROR: unrecoverable error ORA-15032 raised in ASM I/O path; terminating process 58982830
Sat Jul 14 00:00:04 2012
opiodr aborting process unknown ospid (48169328) as a result of ORA-28Sat Jul 14 00:00:04 2012
opiodr aborting process unknown ospid (25952536) as a result of ORA-28
Sat Jul 14 00:00:04 2012
opiodr aborting process unknown ospid (55967964) as a result of ORA-28
Sat Jul 14 00:00:07 2012
opiodr aborting process unknown ospid (32834224) as a result of ORA-28
Sat Jul 14 00:00:07 2012
opiodr aborting process unknown ospid (23593488) as a result of ORA-28
Sat Jul 14 00:00:07 2012
What is wrong in ASM and DB ?
Thanks & Regards,
VN

Error RPE-01011 Raised when Deploying

Error RPE-01011 Raised when Deploying
OWB Client: 10.1.0.2.0
OWB Repository 10.1.0.1.0
Database: 10.1.0.2.0
Please Help,
Thanks,
Walter

1) Start the OWB OC4J Instance (start -> programs -> oracle-warehouse builder -> Start OWB OC4J Instance)
2) Once the OWB OC4J Instance is started, start the OWB Runtime Audit Browser (start -> programs -> oracle-warehouse builder -> OWB Runtime Audit Browser)
3) In OWB Runtime Audit Browser window, select the QA User ROLE and fill in the connections informations (runtime repository owner)
4) Click on the View Deployment report
5) Select the Location TAB
6) Select the target locations that have the Type Version still in the previous database version and click on "Unregister Selected Locations " Button
7) Start OWB client (Design)
8) Check that your target locations have the correct database version in the locations properties
8) Start the deployment manager and re-register each locations you unregistered

Error 513 while raising the message from satellite system

Hello All,
When I try to send message(Service desk) from satellite system, i get following message
"Because of error 513, no message was creat
Support Desk System"
I gusses there is some problem with authorisation.
please guide how can I fix this issue.
Regards,
Shyam.

Hi Gurus,
I have assigned customized action profile to SLFN transaction.
When I try to send message(Service desk) from satellite system, I get following message
"Because of error 513, no message was created
Support Desk System"
But when we check in crm_dno_monitor , the message is created at the backend,but without assigning external number range.
Whenever I am making any modification in action profile, it is creating the first messgae after restart
of SAP Solman System, but for next message, Error 513 message is raised and message is created at backend without assigning external number to it
I think there is some problem in number range or buffer in number range
Can some one help me in this
regards
Swati

Error FF 711 raised during posting of items in FI-AP

Hello Friends,
we are getting error message FF 711 when
trying to post from the ICM module into FI-AP using the
BAPI_ACC_INVOICE_POST funcation Module.
We have both service tax and withholding tax calculation switched on
and everythings seems to work fine, except in case the document
includes both debit and credit items.
Payable 1000 INR withholding and service tax is applicable
Receivable - 950 INR withholding tax not applicable, service tax
applicable
so we end up with the following line items on the document, including
the tax lines:
1000
- 100 WHT
- 40 Service Tax (4%)
- 63 Service Tax (6.3%)
- 900
+ 36 Service Tax (4%)
+ 56.70 Service Tax (6.3)
overall - 10.3
For some reason, as soon as the overall document value is just barely
negative error FF 711 is getting raised.
In case we post each of the items seperatly, or have a positive
balance, all is working correctly.
Please do me needful.
Regards,
Satya Vani.

Dear Vani,
please kindly check the SAP note 1249265 that can help You.
Mauri

Raise_Exception error coming at Raise fatal_erorr statement

Hi,
I have got one issue related to dup ananlysis.
In ST22 , name of error is - RAISE_EXCEPTION.
Error occured at statement- raise fatal_error written after function module - lf_funcname
Error analysis given in ST22 is as below-
Short text
    Exception condition "FATAL_ERROR" raised.
Information on where terminated -
    Termination occurred in the ABAP program "SAPLST3R" - in
     "TS3R_REMOTE_DISPATCHER".
    The main program was "SAPMV45A ".
Source code extract-
CALL FUNCTION lf_funcname
      EXPORTING
           it_yeartab   = lt_yeartab
           is_ttstr     = ls_ttstr
           if_objkey    = if_objkey
      IMPORTING
           et_gensegtab = lt_gensegyeartab
      EXCEPTIONS
           OTHERS       = 2.
IF not sy-subrc is initial or lt_gensegyeartab[] is initial.
   raise fatal_error.
else.
   read table lt_gensegyeartab index 1 into ls_gensegyearwa.
Error occured at statement - raise fatal_error.
Please guide me how to overcome this error or what is reason for this error.
Thankyou,
Manisha
Edited by: manisha22 on Jan 29, 2010 10:33 AM

Please let me know if you got any solution for this.
Thanks.

How to restrict the Save of a Campaign if any error messages are raised/there?

Hi All,
How to restrice the save of the Campaign if any error messages are called/raised.
Now, I am using conditions in the Save method but it is not working now.
find the Attachment for the error message.
I am assuming this error is calling from some where not from my code.
Please suggest me any Badi or other way to restrict the save of the Campaign.
Thanks in Advance....
Regards
vam's

Hi I am actually trying to prevent the saving by using the BADI and putting
ev_reject_save = abap_true.
Nevertheless the campaign is saved with errors...any idea how to prevent this ?

Error should be raised immedietly

Hi!!
I am using jdeveloper 11.1.1.5
I had a small use case in which i had dragged and dropped my EmpContDetVO as my af:table.
In which i have two fields such as startdate and enddate . If the user enters the enddate which is smaller than the startdate then the error occurs successfully when user tries to hit Save Button [Commit operation].
But i need to raise error immediatly when the user tries to navigate to other field.
Whether it is possible without using javascript. Could anyone can give me suggestion with appropriate documents

Thank you sameera!!
I had used this code in my AMImpl Method
   public void checkdate (){
        ViewObject vo = this.getPurAdminView1();
        Row vor = vo.getCurrentRow();
        Calendar cf = Calendar.getInstance();
        Calendar ce = Calendar.getInstance();
        java.util.Date startdate;
        java.util.Date enddate;
            startdate = convertDomainDateToUtilDate((Date)vor.getAttribute("PuraDateFrom")); //Returns the value
            enddate = convertDomainDateToUtilDate((Date)vor.getAttribute("PuraDateTo")); //Returns the value
            cf.setTime(startdate);
            ce.setTime(enddate);
            if (cf.after(ce)){
                throw new JboException ("Start date is greater than EndDate");
    }I had called this method using the validator
public void cil13_actionListner(FacesContext facesContext, UIComponent uIComponent,
                             Object object) {
            BindingContainer bindings = getBindings();
            OperationBinding operationBinding =
                bindings.getOperationBinding("checkdate");
            Object result = operationBinding.execute();
    }The null pointer Exception actually occurs in Calendar.java
    public final void setTime(Date date) {
        setTimeInMillis(date.getTime()); //Null Pointer Exception
    }Main Theme of my concept i need to check whether enddate is greater than startdate if not the error must be thrown immedieatly i.e., if user navigates to another field
@@Suresh--Thank you for your reply suresh But both of the startdate and enddate will be entered by the user.

Error raised using 'CRM_MESSAGE_COLLECT' not displayed in Web UI

Hello,
I have implemented the badi CRM_ORDERADM_H_BADI and based on certain conditions i raise an exception and display the error message using function module 'CRM_MESSAGE_COLLECT'. The application log is populated with the error message and I am able to see the error message in SAP GUI . However when the same transaction is triggered via WebUI , even thought the exception is raised , the error message is not displayed.
I know i can use the method ADD_MESSAGE of the class CL_CRM_GENIL_GLOBAL_MESS_CONT if i want the error message to be displayed in Web UI .
However I want the message to be displayed either if the transaction is run from the SAP GUI or web UI .
Have anyone come across the similar situation , is there something I am missing.
Thanks & Regards ,
Sriram.

Hello Arun ,
I got the solution . The error message was raised properly . The problem is message filter at every view or viewset of a component is actually switched off by default.With standard components the filter gets activated at runtime if the component controller contains a BOL entity.
In our case , since it was a custom component with no BOL entity the filter was switched off and hence the messages from the application level were not read.
Therefore we redefined the filter method IF_BSP_WD_STATE_CONTEXT~GET_MESSAGE_FILTER at the view/viewset level and turned on the filter by default.hence even if the component does not return an entity the message filter gets activated.
Thanks for your inputs.
Thanks & Regards,
Sriram

How can i get the error message from the thrown/raised exception?

DB version:10gR2
Examples for this thread taken from
Want Stored Procs to get exectuted regardless of preceeding SPs Success or
I have a package with several functions and procedures inside.I created a caller procedure called callProcs, which will execute various procedures within the package in the appropriate order.
In the below example i cannot get the error message thrown from line 20
create or replace package body mypackage
is
variable_proc1 number;
variable_proc2 number;
variable_proc3 number;
v_result       number;
my_exception   exception;
procedure proc1
is
begin
select 8/0 into variable_proc1 from dual;
exception
          when others
          then raise my_exception; ----line 20
end;
procedure proc2
is
begin
select 1 into variable_proc2 from dual;
exception
          when others
          then
               null;
end;
procedure proc3
is
begin
select 3 into variable_proc3 from dual;
exception
          when others
          then
               null;
end;
Procedure caller_proc
is
begin
proc1;
proc2;
proc3;
v_result:=variable_proc2+variable_proc3;
dbms_output.put_line('The output is '||v_result);
exception
          when my_exception
          then
dbms_output.put_line('Heyyyyy the error is '||SQLERRM); -- exception caught at line 64 of caller proc
end;
end mypackage;
When i try executing the caller proc, i don't get the error. Instead i get the text User-Defined Exception as shown below
set serveroutput on
exec mypackage.caller_proc;
Heyyyyy the error is User-Defined Exception
PL/SQL procedure successfully completed.Edited by: user10633418 on Mar 10, 2009 11:30 PM

Thank you justin.
Sorry my earlier post was a bit ambiguous.
I wanted the error generated at proc1 to be captured at caller proc's Exception handling section (line 64) so that i could log the error to an ERR_LOG table.
I can actually log this error at proc1 itself like
exception
when others
THEN
error_message :='My custom message for the particular proc '||SQLERRM;
dbms_output.put_line(error_message);
logerror(error_message); --an autonomous error logging proc
raise;But there is a RAISE statement in proc1's exception handling, so the exception gets propogated to caller proc's exception handling section {color:#ff0000}*and another redundant row will be created at ERR_LOG table for the same error because there is a*{color}
logerror(error_message);--an autonomous error logging proc
in the WHEN OTHERS section of exception handling section of the caller proc
I want to avoid the creation of this redundant row in ERR_LOG table.

Runtime Errors Raise Exception in Solution Manager

Hi Guru's,
While I try to excute the transaction solman_issue_mgnt in solution manager for issue tracking, runtime errors occurs.
Error analysis
    A RAISE statement in the program "CL_GUI_HTML_VIEWER============CP" raised the
     exception
    condition "CNHT_ERROR_PARAMETER".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
Could anyone suggest me on this issue.
regards,
Guna

Hi Juan,
As per the note, everything was fine there. We have SAP_Basis 700 with SP16.
Earlier it was worked fine. Now only we are facing this issue while excuting the t-code solman_issue_mgmt.
regards,
Guna

Error in BEx Analyzer Exception condition "HIERARCHY_NOT_FOUND" raised.

When i run report 0FIAA_C02_Q1001 with input variable as "My controlling area" i get this error.
ERROR:
Exception condition "HIERARCHY_NOT_FOUND" raised.
ERROR Analysis:
A RAISE statement in the program "SAPLRRH1" raised the exception
condition "HIERARCHY_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Please sugggest how to resolve this.
HOw to see which hierarachy it is talking about?
Thanks,
Harika.
Edited by: harikag on Oct 12, 2011 7:11 AM
Edited by: harikag on Oct 12, 2011 7:12 AM

HI
FOr 0Costcenterinfoobject->attribute tab->no hierarhcies
                                         ->hierarchy tab->i see hierarchy tables are enabled.But when i click on
                                             "MaintainHierachy" there are no hierrachies in it.
For 0CO_AREA infoobject->attribute tab->0CCA_HIENM,0PCA_HIENM hierarchies are there.
                                         ->hierarchy tab->nothing is there.
please help out.I didnt load 0COSTELMNT_0102_HIER master datasource in CO_IO.
Is that the reason?

Raise Application Error on Dynamic Action

Hi
I am using Apex 4.2. On a click of button a Dynamic Action is written, which calls a DB Package. The DB package has exception handlers and also the package has two output parameters
Error Code and Error Msg
So in my code(Dynamic Code) i make a call to the package and checks the value for Erroc Code.
Begin
Package call......
If v_error_code <> '0' Then
    Raise SC_Error;
End if;
Exception
When SC_Error Then
    RAise_Application_error(v_err_code, v_err_msg);
End;
But when i run the page and I click I get an Internal exception error
Output from Debug -- I am not sure what the Cell in Red colour means, because the package is returning a correct message (before the red line).Can anyone help please??
Thanks
JS
......message: AJAX call returned server error ORA-20003: Customer has already been matched for Execute PL/SQL Code.
4
......is_internal_error: true
4
......apex_error_code: APEX.AJAX_SERVER_ERROR
4
......ora_sqlcode: -20003
4
......ora_sqlerrm: ORA-20003: Customer has already been matched
4
......error_backtrace: ORA-06512: at line 41 ORA-06512: at "SYS.DBMS_SYS_SQL", line 1926 ORA-06512: at "SYS.WWV_DBMS_SQL", line 973 ORA-06512: at "SYS.WWV_DBMS_SQL", line 999 ORA-06512: at "APEX_040200.WWV_FLOW_DYNAMIC_EXEC", line 830 ORA-06512: at "APEX_040200.WWV_FLOW_PLUGIN_UTIL", line 2304 ORA-06512: at "APEX_040200.WWV_FLOW_DYNAMIC_ACTION_NATIVE", line 442
4
......component.type: APEX_APPLICATION_PAGE_DA_ACTS
4
......component.id: 23185203797756209
4
......component.name: NATIVE_EXECUTE_PLSQL_CODE
4
...Execute Error Handling Callout defined on Page or Application Level
4
...Execute Statement: begin declare l_error wwv_flow_error_api.t_error; begin l_error := wwv_flow_error_api.g_error; wwv_flow_error_api.g_error_result := apx_error_utils.handleerror ( p_error => l_error ); end; end;
4
......Values changed by callout:
4
.........message: An unexpected internal application error has occurred. Please get in contact with your system administrator and provide reference# for further investigation.
4
.........display_location: ON_ERROR_PAGE
4
Stop APEX Engine detected
4
Final commit
4
1 - 59

Edit: Well, Patrick beat me to the punch because I was taking my jolly time writing this down
Well, if you look below the part you put in red, you can see that a callout is made: ...Execute Error Handling Callout defined on Page or Application Level
With directly below that:
......Values changed by callout:
4
.........message: An unexpected internal application error has occurred. Please get in contact with your system administrator and provide reference# for further investigation.
Since the plsql call is on the serverside, this error is trapped within the error handling function aswell. Your error has simply been obscured by it, and probably because it looks at the error backtrace and determines the error is internal.
Looking at the sample error handling code, this is probably where it goes "wrong":
-- If it's an internal error raised by APEX, like an invalid statement or
-- code which cannot be executed, the error text might contain security sensitive
-- information. To avoid this security problem rewrite the error to
-- a generic error message and log the original error message for further
-- investigation by the help desk.
if p_error.is_internal_error then
I recreated the situation here, and put some debug in the error handling function just so I could see what sort of error is being processed:
    apex_debug.message('error code: '||p_error.apex_error_code);
    apex_debug.message('sql code: '||p_error.ora_sqlcode);
    apex_debug.message('sql errm: '||p_error.ora_sqlerrm);
    apex_debug.message('error_backtrace: '||p_error.error_backtrace);
0.05750
0.00007
...Error data:
4
0.05757
0.00006
......message: AJAX call returned server error ORA-20099: raise application error for Execute PL/SQL Code.
4
0.05763
0.00006
......is_internal_error: true
4
0.05769
0.00005
......apex_error_code: APEX.AJAX_SERVER_ERROR
4
0.05774
0.00005
......ora_sqlcode: -20099
4
0.05779
0.00006
......ora_sqlerrm: ORA-20099: raise application error
4
0.05785
0.00005
......error_backtrace: ORA-06512: at line 1 ORA-06512: at "SYS.DBMS_SYS_SQL", line 1926 ORA-06512: at "SYS.WWV_DBMS_SQL", line 1064 ORA-06512: at "SYS.WWV_DBMS_SQL", line 1090 ORA-06512: at "APEX_040200.WWV_FLOW_DYNAMIC_EXEC", line 832 ORA-06512: at "APEX_040200.WWV_FLOW_PLUGIN_UTIL", line 2304 ORA-06512: at "APEX_040200.WWV_FLOW_DYNAMIC_ACTION_NATIVE", line 442
As you can see, the ajax error is an internal error, and that is why it is handled as such in the error handler. With this info you should be able to adjust your handling function. Test for the error code (APEX.AJAX_SERVER_ERROR) and then throw the error message or test for the -20000 range of custom errors for example.
    if p_error.is_internal_error then
        -- Access Denied errors raised by application or page authorization should
        -- still show up with the original error message
        -- do not parse ajax server errors here !
        if    p_error.apex_error_code <> 'APEX.AUTHORIZATION.ACCESS_DENIED'
          and p_error.apex_error_code not like 'APEX.SESSION_STATE.%'
          and p_error.apex_error_code != 'APEX.AJAX_SERVER_ERROR'
        then
It probably does need some more work but you should get the gist of it.

Error in po raising

Similar Messages

Maybe you are looking for