Error in po required
hi
while creating po with respect to particular tax code(suppose V5-BED16%,ED CESS3%),shall system give me any error messge if i not maintain any j1id/condition record for that material?
it is validation or message setting ?
sugest
sunil
hello
i dont think there is any std message to set it erro or warning ( i ahve not come across with any type of message like that.
it can be don by user exit in PO
take help of abaper to write a logic and create a error message
Hope this helps
Reward according to get better ans
Similar Messages
-
I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?
I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message. -
I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
I was taken through msconfigure and adjusted the startup tab but still no joy.
In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
The 1st message is;
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
When I click ok the next message that appears sometime later during the install is;
Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
The options I have are to abort, retry or ignore. If I retry the same message comes back and if I abort or ignore the download continues and I then get the following message:
'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
After attempting to reinstall itunes only some components were installed however itunes would not open.
It would appear many people have experienced problems with this latest download!'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Error "424 Object Required" when opening journal report using HFM 11.1.2.1
Hi experts,
I've installed EPM 11.1.2.1 along with Hyperion Financial Management and Financial Reporting on an virtual machine (OS is windows server 2008),
when I logon to workspace and tried to open an journal report in HFM-Format, appears error message as follows:
An error has occurred. Please contact your administrator
Error Number:424
Error Description: Object required
Error Source: Microsoft VBScript runtime error
Page On which Error Occurred:../reports/CheckStatus.asp
I've checked oracle support and found article ID 967025.1 describing almost the same issue of mine,
but the suggested solution was to add workspace and HFM web server to trusted site. (I'm using IE9)
I did so as well as other recommended browser settings but still the error remains.
The article said the solution was applied to Version 9.2.0.0 to 11.1.1.3, so I'm not sure if version 11.1.2.1 has other causes or solutions.
Could experts provide any ideas?I believe you might have already done with the below steps, but please reconfirm:
1) Ensure, that both the Hyperion Workspace URL AND the HFM webservername i.e(Http://<hfmwebservername>/hfm) is added in the sites button in the Trusted sites option. under Security tab.
2) Here is a list of Internet Explorer settings which are recommended to be set on the client machine:
1. Configure browser to check for new version every time user visits a page
* Open Internet Explorer
* Go to Tools > Internet options > General
In 'Browsing history' section select 'Every time I visit the webpage'
* Click Ok, then Apply.
2. Disable default pop-up blocking
* Open Internet Explorer
* Go to Tools > Internet options > Privacy tab
Uncheck 'Turn on Pop-up Blocker'
3. Add workspace URL to trusted sites
* Open Internet Explorer
* Go to Tools > Internet options > Security tab
* Select Trusted sites from Select a zone to view or change security settings.
* Type your workspace URL in form http://workspaceserver:portnumber in 'Add this website to the zone'
* Uncheck 'Require server verification (https:) for all sites in this zone'
* Click Add, then Close.
* Click Ok and Apply.
4. Minimize security setting for trusted sites
* Open Internet Explorer
* Go to Tools > Internet options > Security tab
* Select Trusted Sites from select a zone to view or change security settings
* Select custom level
* From Reset to list select Low
* Click Ok
* Click Apply, then Ok
5. Customize security settings
* Open Internet Explorer
* Go to Tools > Internet options > Security Tab > Custom Level
* In 'Miscellaneous' section enable the option "Allow script-initiated windows without size or position constraints"
* In 'ActiveX controls and plug-ins' section enable “Run ActiveX controls and plug-ins” and “Script ActiveX controls marked safe for scripting.”
6. Enable option "Always allow session cookies".
* Open Internet Explorer
* Go to Tools > Internet options > Privacy Tab > Advanced > Check the "Override automatic cookie handling" and accept the first and third party cookies and check the "Always allow session cookies" option.
7. Disable option "Enable Native XMLHTTP".
* Open Internet Explorer
* Go to Tools > Internet options > Advanced Tab > Uncheck the option "Enable Native XMLHTTP"
If still facing the same issue, perform the below action plan:
1) Give full permission to Filetransferfolder and try generating the reports.
2) Add the Everyone user and dcom user to BIPubSystemReports.
DCOM Config-> BIPubSystemReports-> Security tab-> add the users in Launch and Activation Permission, Access permissions and Configuration Permissions.
Best regards. -
A serious error occurred that requires adobe Premier pro to shut down
Por favor alguien ha solucionado este problema?. Me ocurre solo después de haber exportado el proyecto como AVI, si lo quiero volver a activar aparece el mensaje "a serious error occurred that requires adobe Premier pro to shut down".
la solución que aparece en un foro de eliminar ciertos softwares de sonido no funciona porque no tengo esos programas.
Si alguién dió con la solución o cuañquier experiencia al respecto, quedaré muy agradecido..
EduardoNot enough information for anyone to even make a guess
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link -
Error while creating requirements data in pendulum list indirect sales.
hi all,
i am getting the following error while creating requirement data in pendulum list indirect sales. t - code - /BEV4/PLAN
" ERROR OCCURED WHILE DETERMINING PERIOD IDENTIFIER""
-- help would be much appreciated..
thanks in advance
leovar spObj = $().SPCascade({
destListColTitles: ['Continent','Country','State','City'],
srcListColInternalNames: ['Continent','Country','State','Title'],
srcListName: 'CitiesLookupList',
srcListFilterCAMLQuery: "<Query><Where><Contains>
<FieldRef Name='Continent'/><Value Type='Text'>America</Value>
</Contains></Where></Query>"
spWebURL: 'http://sharepointurl',
getDataOnly: 'false',
debug: 'true',
}); -
While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation m not able to install windows on my mac . Please help what to do ??
What DVD drive are you using?
-
Invoking Xai Service from BPEL process (Error 411--Length Required)
Hi Friends,
I am trying to invoke xai inbound service webserive i.e WSDL from BPEL process, when i am testing the request i am getting the following error
oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: oracle.fabric.common.FabricInvocationException: Unable to access the following endpoint(s): http://190.12.19.100:6500/spl/XAIApp/xaiserver/CMMBC
when i open the above end point url in the browser:
Error 411--Length Required
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.12 411 Length Required
The server refuses to accept the request without a defined Content- Length. The client MAY repeat the request if it adds a valid Content-Length header field containing the length of the message-body in the request message.
pls help me out
thanks and regards
sivaram
Edited by: sivaram on Apr 21, 2011 6:56 AMYes we have got the same error while invoking from SOAP UI.
But wsdl alone is opening through browser.
But when we try opening the endpoint url we are getting the above error.
Please help! -
Error: The following required field is missing from the launch file: jnlp
PLEASE help me.
I was at Starbuck's today trying to install new software for my new wireless internet card and when I finished I could no longer access any of my applications that require java... I have a macbook pro dual platform computer. When I try to access www.bayphoto.com to download my application it says: (see below) (which I think is strange because it's all about Starbuck's and it should be my java code- I think...). Like I said - I have no idea what's going on or how to fix this. Please help me or at least tell me whom to call- I feel so stupid- I just need help- ATT? Starbuck's? Sun?
Error: The following required field is missing from the launch file: <jnlp>
Under the "exceptions" tab it says:
MissingFieldException[ The following required field is missing from the launch file: <jnlp>]
at com.sun.javaws.jnl.XMLFormat.parse(XMLFormat.java:88)
at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(LaunchDescFactory.java:52)
at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(LaunchDescFactory.java:64)
at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(LaunchDescFactory.java:72)
at com.sun.javaws.Launcher.updateFinalLaunchDesc(Launcher.java:214)
at com.sun.javaws.Launcher.prepareToLaunch(Launcher.java:127)
at com.sun.javaws.Launcher.launch(Launcher.java:95)
at com.sun.javaws.Main.launchApp(Main.java:305)
at com.sun.javaws.Main.continueInSecureThread(Main.java:213)
at com.sun.javaws.Main$1.run(Main.java:108)
at java.lang.Thread.run(Thread.java:613)
Under the "launch file tab" it says:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<title>AT&T Wi-Fi Service @ Starbucks</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="description" content="Starbucks Entertainment presented by AT&T Hotspot" />
<meta name="keywords" content="AT&T, Starbucks, Wi-fi, Wifi, Hotspot, coffee, music, books, games, fresh sheet, third place, online" />
<meta name="author" content="Starbucks Entertainment" />
<link rel="shortcut icon" type="image/ico" href="/favicon.ico" />
<script type="text/javascript" language="javascript" src="/dhtml/master.js"></script>
<script type="text/javascript" language="javascript" src="/dhtml/x_core.js"></script>
<script type="text/javascript" language="javascript" src="/dhtml/x_event.js"></script>
<script type="text/javascript" language="javascript" src="/dhtml/x_xhr.js"></script>
<script type="text/javascript" src="/dhtml/att/dhtml.js"></script>
<style type="text/css">
copied from starbucks master.css
body {
background:#200D06 url("/graphics/att/themes/sbux/hotspot_bkgd.jpg") repeat-x scroll;
color:#555555;
font-family:Arial,Helvetica,sans-serif;
font-size:small;
line-height:1.5em;
margin:0pt;
padding:0pt;
text-align:center;
#wrap {
font-size:95%;
margin:0pt auto;
text-align:left;
width:980px;
#starbucksframe {
margin:15px 0pt 0pt;
padding:0pt;
/*our addendae*/
div#header {
height:95px;
width:980px;
background-image:url("/graphics/att/themes/sbux/header_bg.jpg");
background-repeat:no-repeat;
margin:0px;
background-top:0px;
background-left:0px;
background-color:transparent;
div#btn_ctti {
position:absolute;
top:10px;
margin-left:388px;
div#sbux_lfrm {
display:inline;
font-size:10px;
color:#FFFFFF;
margin-left:245px;
top:49px;
position:absolute;
line-height:10px;
font-family:verdana,arial,helvetica,sans-serif;
div#sbux_lfrm form {
margin:0px;
div#sbux_lfrm a, div#sbux_lfrm a:link, div#sbux_lfrm a:hover, div#sbux_lfrm a:active, div#sbux_lfrm a:hover {
color:#FFFFFF;
div#sbux_lfrm form label {
display:none;
visibility:hidden;
div#sbux_lfrm form input, div#sbux_lfrm form select {
font-family:verdana,arial,helvetica,sans-serif;
vertical-align:middle;
div#sbux_lfrm input.example {
color:#656565;
#sbux_lfrm_row1, #sbux_lfrm_row2 {
margin:0px;
#sbux_lfrm input#username, #sbux_lfrm input#password, #sbux_lfrm input#password_pw {
width:136px;
margin-right:6px;
font-size:10px;
#sbux_lfrm select#roamRealm {
width:130px;
font-size:10px;
color:#656565;
margin-right:6px;
#sbux_lfrm_row2 {
position:absolute;
top:21px;
left:-4px;
div#aupAgree_row {
margin-top:4px;
position:relative;
left:-4px;
div#aup_box {
float:left;
position:relative;
top:-3px;
div#aup_text {
float:left;
line-height:10px;
div#tm_badge {
width:115px;
height:94px;
float:right;
margin-right:0px;
margin-top:0px;
div#password_value {
display:inline;
div#hidden_pw_field {
display:none;
visibility:hidden;
div#sbux_lfrm.css_form {
margin-top:0px;
</style>
<style>
/* IE specs */
body {
font-size: x-small; /* IE5 Win */
voice-family: "\"}\"";
voice-family: inherit;
font-size: small;
html>body { /* be nice to Opera */
font-size: small;
/* self-clearing floats
/* trigger hasLayout and target ie5+6/win only */
*:first-child+html #header,
*:first-child+html #login_wrapper {
height:95px;
#ny_legal {
color:#CAC3BF;
font-size:11px;
font-weight:bold;
padding:0;
#ny_legal a:link {
color:#CAC3BF;
font-size:11px;
font-weight:bold;
padding:0;
</style>
</html>
TOO LONG TO INCLUDE ALL CODE<?xml version="1.0" encoding="UTF-8"?>
<jnlp codebase="file:///C:\eclipse\workspace\studentconverter\webroot" href="studentconverter.jar" >two things wrong here -
first codebase is not legal URL, File.separator (backslash on windows) needs to be converted to forward slash in URL's.
second, the href is not to the jnlp file, it is to the jar !
href="studentconverter.jar" - should this be href="studentconverter.jnlp" ?
/Dietz -
I need to download this: (http://support.apple.com/kb/DL788) because my macbook wont turn on unless its charged. I did all the resets like VPRAM, SMC, and I forgot the other one.
My pack thingy is 0002 and it says that if its 0003 then you dont need the update but I do need the update.
I get this error:
This update requires Mac OS X Tiger 10.4.11 or newer or Mac OS X Leopard version 10.5.6 or newer.
I purchased the battery in December. It worked fine but now its happening again! Please help! Its annoying and the nearest Apple store is 2 hours away!Please help me!
-
Hello,
I am trying to repair my Firefox profile, but I cannot open profile manager in Mac OS 10.5.8. When I follow the directions for opening profile manager in my Terminal utility, I get the following error: "dyld: unknown required load command 0x80000022 Trace/BPT trap".
At this point, Firefox (v 5.0 or previous versions), is not running.
Thanks.[http://asqueella.blogspot.com/2010/12/dyld-unknown-required-load-command.html Here's an Explanation]. Basically you need to add "arch -i386 " at the beginning of the command because 10.5 is 32-bit only and more recent versions of Firefox default to 64-bit.
-
cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please help me
Doublechecking. In the course of your troubleshooting to date, have you worked through the instructions from the following document?
iTunes: Missing folder or incorrect permissions may prevent authorization -
I recently downloaded and installed the latest version of iTunes and now keep getting the error message "A required iTunes component is not installed. Please re-install iTunes (-42404)".
Since this, my iPad will not sync, despite resetting it many times.
I have downloaded and installed the new iTunes more than ten times with no luck.
Please can anyone help!!!!!!!Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now? -
IDOC Error - Trading Partner Required
Hello Expert,
I am trying to post a document through an idoc, but getting an error "Trading Partner required".
Where i have to update these details?
Thanks,
SatyaHi Ashish,
The IDOC type is a customized one...
Then where i can check this field, can you give me some light on this?
In which segment it will be ?
Thanks,
Satya -
When trying to load music from ITunes to my ipod I receive the error "The software required for the ipod is not installed correctly. Please reinstall itunes to install the required sotware"
What should I do to correct the error?For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies. The notes below the box include tips on removing troublesome components.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
tt2 -
ADFDi Error : The remote server returned an error: (411) Length Required
JDeveloper version 11.1.2.1.0
weblogic Version 10.3.5.0
Hi All,
From ADF Desktop integration application, When the user key in username and password the system show the following error message. Please help to me how to tackle it as well as useful blogs.
Regards
KT
Error Detail:
WebException: The remote server returned an error: (411) Length Required.
Source: System
Stack:
at System.Net.HttpWebRequest.GetResponse()
at oracle.adf.client.windows.common.internet.http.ManagedHttpResponse..ctor(HttpWebRequest request)
at oracle.adf.client.windows.common.internet.http.ManagedHttpRequest.GetResponse()
at oracle.adf.client.windows.datamanager.servletrequest.SyncRequest.BeginResponse()
at oracle.adf.client.windows.datamanager.servletrequest.TamperCheckRequest.InternalCallSyncServlet()
at oracle.adf.client.windows.datamanager.servletrequest.SyncServletRequest.CallSyncServlet(Boolean retry)
at oracle.adf.client.windows.datamanager.ADFBindingContext.SendSyncServletRequest(SyncServletRequest request)
at oracle.adf.client.windows.datamanager.ADFBindingContext.CheckForTampering()
at oracle.adf.client.windows.datamanager.ADFBindingContext.PreSyncServletTamperCheck()
at oracle.adf.client.windows.datamanager.ADFBindingContext.SyncModel(BindingContainer bc, String contentType)
at oracle.adf.client.windows.datamanager.BindingContainer.Repopulate()
at oracle.adf.client.windows.datamanager.BindingContainer.SyncModel(Boolean forceSync)
at oracle.adf.client.windows.excel.runtime.uicomponent.RTActionCollection.DoInvoke(RTColumnCollection parent, String contextLabel)In which environment is your application hosted? Are there any other network components sitting between the client and the application, such as CDN or load balancer?
It would be very helpful if you can capture the client-side HTTP traffic using some tools (e.g. Fiddler - http://www.fiddler2.com/fiddler2/), so that we can know where the "401 length required" error is sent from by looking at the header of the HTTP response of the error.
Maybe you are looking for
-
Acrobat Pro 8.1.2 crashes when displaying pdf made from Word doc containing url text
Hello, I and a few others in my workplace have a similar issue. Acrobat crashes when they scroll through and view a pdf file that was created from Word. The Word document contains url text in its header to the effect of "visit us at www.blah.com ."
-
I want to send REMADV Idoc (remitance advice) to vendors after payment run F110 is complete. I have completed following steps 1. in Vendor master checked the flag for "Pay. Adv. by EDI) 2. Maintained variant for program RFFOEDI1 and selected variant
-
Maintaining multiple ship to party address in ECC 6.0
Hi Guys, Could you please let me know, how we can multiple ship to party address for a customer in ECC 6.0? Thanks, Kam.
-
Could you please explain about the chain and end chain and module
hi experts could you please explain about the chain and end chain and module keywords?
-
Any time a secondary window should open there is no information showing. For example, when needing to view an electronic version of a check from a bank site when I click on the check another window opens but it is totally blank. And it isn't just one