Error in portal for SRm trnasactions

Hi,
Im working on SRM 7.0 with EP 7.0.When logging into portal ,i get this following errors if i click on any of the SRM transactions(Procurement and Purchasing menu) .
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 06:16_26/05/09_0159_16270850
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 06:16_26/05/09_0160_16270850
Refer to the log file for details about this exception.
Is this issue related to mapping of the SRM and Portal user ID's?Has anyone come across this problem?Any inputs will be highly appreciated.
Thanks in advance.
BR.
SRM tech

Hi Michael,
Thanks for the prompt reply.However cna you explain in detail(prefreably with the path) as to how do I check the End user flag settings in portal using the System admin and also the relevant system alias settings?
Thanks again for your time.

Similar Messages

Com.sap.pct.srm.core configuration missing in Portal for SRM

Hi,
We have installed a new portal 7.0 ehp1.
Installed the SRM business package.
configured all the roles.
Configured UWL
But in Universal workflow configuration content , com.sap.pct.srm.core is missing.
In our development system , it was already present. Not sure why in the new system it is missing.
Can we download from the development system and upload it in the new system.
Thanks,
Tanuj

That should have been installed when you install the corresponding BP for SRM.
To answer your question - yes you can download it from your DEV system and upload it into your QA system.
Thanks,
Shanti

"Invali date" error on Portal for termination PCR.

Hi Experts,
I am working on termination PCR. when I check my PCR on Portal it works very fine when the value in the effective date field is sy-datum.But when the date is changed to any other than sydatum then On portal i get an error message as "INVALID DATE".Th BADI which I m using is QISR1.
please let me know where to check for this error and how to resolve it?
Thanks in Advance.
Sarang

Hi Anand,
I am facing the same problem. Were you able to resolve that issue? if so, what is the solution? I don't find any relevant note for this.
Probelm: BRF is activated and when you do save/check on SC, throws short dump with error message as
"Dynamic type conflict when assigning references".
"MOVE_CAST_ERROR" "CX_SY_MOVE_CAST_ERROR"
Thanks
Akbar

Separate Portal needed for SRM component

Hi,
We are having an EP portal for ESS, MSS scenario.We are also implementing SAP SRM which requires portal as frontend. Just wanted to know whether we can user existing portal(having ESS,MSS) for SRM as frontend?
Please let me know any pros and cons of having separate portal for SRM and not having also.
Thanks and Regards,
Sanjay Patwal

Running SRM with ESS/MSS/BI is not a problem. They are simply different applications running on the same infrastructure.
Your question can also be phrased as 'Should I run on a separate JAVA instance'. Well if you think your ESS/MSS portal is already under strain, then yes putting on SRM will also increase the load unless you scale your portal sizing.
Secondly, some clients like to separate out SRM and ESS/MSS so that there are no interdependencies when it comes to patching. For example you may be patching your SRM ABAP, which will in turn require a patch to SRM Business Package which may in turn require a patch to JAVA engine which may impact ESS Business package. Managing the sp stacks can be a little tricky if you run all your apps on one portal. So you can split them out and federate.
Just some thoughts...I know it doesn't tell you exactly what to do. Essentially it is not a problem...It is a question of strategy. In the past I've used SRM on same portal as ESS/MSS and used the SRM JAVA Portal for external users.
Regards
Mr.T

External SAP Portal for Bidders in SRM 7.0

Hi All
In the strategic sourcing Business Scenario, we need to enable the bidders to submit their bids from outside the network firewall.
Some questions in this regard:
1) Should we have a separate portal for the bidders ( from the one used by the employees inside the firewall) for security
purpose?? Earlier I had seen a different URL for SAP enterprise portal for external vendors at a client place.However not sure if it is a single Portal instance or two separate ones.
2) Do we need to install a SAP Web dispatcher in the DMZ as suggested by SAP in the SRM 7.0 security guide for the external portal? Could we simply make the Enterprise portal available outside without setting up the DMZ
3) Since portal is role based, the suppliers won't be able to access anything else, then the process bids screen.What are the other security concerns if the same portal is shared between employees and suppliers?
Regards
Kedar

Hi
Bidding always happens in your SRM System, although External partners execute that activity. It really depends on your security policies whether you want to give them http or https access...
Regards
Virender Singh

How to setup the portal with the uniform style for SRM + Esourcing?

how to setup the portal with the uniform style for SRM + Esourcing? We will setup SRM 7 + esoourcing + portal, but as we know esourcing screen style is not same with SRM, so how to uniform the style between this 2 diffirent software? any body have idea?

Hi,
SAP E-Sourcing 6.0 is the solution. It is same look&feel.
Regards,
Masa

Need to create a Web Dynpro Application for SRM Portal

We need to recreate the start page for SRM Portal - (Supplier Self-Services) - without any images (as was delivered out of the box) - basically we need to break it down into 4 iViews: All Purchase Orders; All Sched Agreement Releases; All Invoices and Credit Memos; and Account History. All these iViews contains links.
How would one create a Web Dynpro Application to create the above iViews?
Regards,

Hi zhang,
take a look to this:
KM:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/kmc/resource%2band%2bcollection%2bversioning%2busing%2bkm%2bapis
https://help.sap.com/javadocs/NW04S/SPS09/km/index.html
Excel:
/people/subramanian.venkateswaran2/blog/2006/10/02/enhanced-file-upload--uploading-and-processing-excel-sheets
Hope this help you.
Vito

Creating system in portal for the backend SRM

Dear All,
We are in the process of setting up a system in portal for the backend SRM system
I have tried to create system in System admin--> System configuration --.>System landscape
For SAP Web AS Connection , the parameters maintained are:
Hostname : <FQ hostname>:8000 ( 8000 is the HTTP port for ICM)
Web AS path: /sap/bc/webdynpro
protocol :8000
But test is failing as 'An HTTP/S connection to http://xxxxxxxxx::8000/sap/bc/webdynpro was not obtained successfully; this might be due to a closed port on the Firewall:
test details:
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (bhidfwao06.ent.bhicorp.com:8000)
5. The host name bhidfwao06.ent.bhicorp.com was resolved successfully.
6. The Web AS ping service http://bhidfwao06.ent.bhicorp.com:8000/sap/bc/ping was pinged successfully.
7. An HTTP/S connection to http://xxxxxxxxx::8000/sap/bc/webdynpro was not obtained successfully; this might be due to a closed port on the Firewall.
Is there any problem with the port, I doublechecked and the port for HTTP is 8000.
If I give the Web AS path: /sap/bc/bsp test is successful.
Any pointers please?
Regards,
Arun

hi arun,
u may have to activate some more services in sicf
u can follow this link what are the neccesary applicaiton need in sicf
http://help.sap.com/saphelp_nw70/helpdata/EN/46/d28dfa34bb12bee10000000a1553f7/frameset.htm
let me know u need any further information
ravindra

Configuration on Portal for Business Package of SRM 5.0

Hi,
The implementation guide for SRM 5.0 does not have documentation for Configuration that must be done on Portal.
Can any body please help on this.
Thanks,
Harish

Hi,
The SAP Note is only talking about the configuration on Backend system . There is no detail about Portal configuration. Can you help on this. I need help on what kind of system I must create, including system aliases, which are the parameters that are required etc.
fURTHER How do I use SAP Solution manager for this?
Thanks,
Harish

Portal 4.0 fatal error when config for MSSQL

I've been trying to configure the portal 4.0 to use MSSQL 2000. I followed
the instructions in the MSSQL addon file. However, after I tried to change
the security realm setting and restart the server, I always get a fatal
error like the following:
Throwable: Exception[com.bea.p13n.security.realm.RDBMSException: An error
occured getting the realm delegate.]
Exception[com.bea.p13n.security.realm.RDBMSException: An error occured
getting the realm delegate.]
at com.bea.p13n.security.realm.RDBMSRealm.getUser(RDBMSRealm.java:239)
at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:806)
at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:670)
at
weblogic.security.acl.internal.FileRealm.getPrincipalFromAnyRealm(FileRealm.
java:1008)
at
weblogic.security.acl.internal.FileRealm.ensureRequiredObjectsExist(FileReal
m.java:957)
at
weblogic.security.acl.internal.FileRealm.loadMembers(FileRealm.java:1202)
at
weblogic.security.SecurityService.initializeRealm(SecurityService.java:274)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:390)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35
I know that my setting for the commerce pool and datasync pool are correct.
I could see the connection in the SQLServer console. Is it necessary to
change the setting of security realm? Can I just turn off the setting to
avoid this error( and how??)? Also when I unchecked 'user CLOB for read'
and 'use CLOB for write' setting in the application domain, I can see the
'deserializing' error from the console. Did you guys entercounter the same
problem when configurate Weblogic Portal for SQLServer? Pls advise.
Thanks.
Cal

Hi.
Please try posting this question in
weblogic.developer.interest.personalization. Folks reading that newsgroup are
more familiar with portal config issues.
Regards,
Michael
cal wrote:
I've been trying to configure the portal 4.0 to use MSSQL 2000. I followed
the instructions in the MSSQL addon file. However, after I tried to change
the security realm setting and restart the server, I always get a fatal
error like the following:
Throwable: Exception[com.bea.p13n.security.realm.RDBMSException: An error
occured getting the realm delegate.]
Exception[com.bea.p13n.security.realm.RDBMSException: An error occured
getting the realm delegate.]
at com.bea.p13n.security.realm.RDBMSRealm.getUser(RDBMSRealm.java:239)
at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:806)
at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:670)
at
weblogic.security.acl.internal.FileRealm.getPrincipalFromAnyRealm(FileRealm.
java:1008)
at
weblogic.security.acl.internal.FileRealm.ensureRequiredObjectsExist(FileReal
m.java:957)
at
weblogic.security.acl.internal.FileRealm.loadMembers(FileRealm.java:1202)
at
weblogic.security.SecurityService.initializeRealm(SecurityService.java:274)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:390)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35
I know that my setting for the commerce pool and datasync pool are correct.
I could see the connection in the SQLServer console. Is it necessary to
change the setting of security realm? Can I just turn off the setting to
avoid this error( and how??)? Also when I unchecked 'user CLOB for read'
and 'use CLOB for write' setting in the application domain, I can see the
'deserializing' error from the console. Did you guys entercounter the same
problem when configurate Weblogic Portal for SQLServer? Pls advise.
Thanks.
Cal--
Michael Young
Developer Relations Engineer
BEA Support

Error starting Portal or Commerce Server when Configured for Oracle

I've been attempting to configure Portal 4.0 to work with Oracle. I'm running Oracle
8i. I carefully followed the instructions found in "Configuring WebLogic Portal for
Oracle Databases". Specifically, I setup the tablespaces, connection pools and successfully
run the scripts to populate the tables. I am confident the Oracle OCI driver is configured
properly (have done this many times). However, after I make all of the necessary
changes and launch the server, I receive the following error:
Starting WebLogic Server ....
<Jun 26, 2002 4:47:32 AM PDT> <Notice> <Management> <Loading configuration file .\config\wlcsDomain\config.xml
..> <Jun 26, 2002 4:47:39 AM PDT> <Emergency> <Server> <Unable to initialize the
server: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
The startup appears to have trouble with the RDBMS security realm. I tried a) leaving
the settings "as-is", configured for Cloudscape, or b) modified to point to my instance
of Oracle (are their additional things I need to load in Oracle to support it using
the RDBMS realm). Is there a way I can disable the security realm to at least get
the server up-and-running (via the web.xml). I've installed and reinstalled many
times, trying various combinations of things.
Any help would be hugely appreciated!
Thanks,
jeff

I finally found this bug in the release notes, i'm surprised one of the bea guys couldn't
answer this....
"Mike Friesen" <[email protected]> wrote:
>
I had the same type of problem with portal 4.0. Trying downloading the
newest 7.0, I found it works much better.
Mike
"K C" <[email protected]> wrote in message news:[email protected]...
I found this as well. However, i still am not able to run the portal afterconfiguring
for oracle. While running create_all, i get many errors like "can binda
LONG value
only for insert into a LONG column"
the table are being created, this appears to occur in the "insertingrequired bootstrap
data" phase.
thanks
"Joshua Davies" <[email protected]> wrote:
You probably followed the instructions too closely. I had the same
problem,
due to
something that's not quite a "bug" in the installation instructions.Look
back at
the section "Update Settings for the RDBMS Security Realm" in thedeployment
guide
(http://edocs.bea.com/wlp/docs40/deploygd/oraclnew.htm#1039294).
In the table in step 2, they show the URL on top, and the Driverclassname
underneath
it. HOWEVER... on the actual data screen, the Driver is on top and the
URL is underneath
it. If you're not being very very careful, it's easy to swap thesetwo
values
and put the URL in the Driver input box and the Driver in the URL input
box. Make
sure you haven't accidentally done this; if you have, you can stillchange
this in
the config.xml file (do a text search for an element RDBMSRealm withan
"name" attribute
of "wlcsRealm").
Verify that it looks like this:
<RDBMSRealm DatabaseDriver="weblogic.jdbc.oci.Driver"
DatabaseURL="jdbc:weblogic:oracle"
Name="wlcsRealm"
and not this:
<RDBMSRealm DatabaseDriver="jdbc:weblogic:oracle"
DatabaseURL="weblogic.jdbc.oci.Driver"
Name="wlcsRealm"
Very subtle gotcha...
"Jeff Davis" <[email protected]> wrote:
I've been attempting to configure Portal 4.0 to work with Oracle. I'm
running
Oracle
8i. I carefully followed the instructions found in "Configuring WebLogic
Portal for
Oracle Databases". Specifically, I setup the tablespaces, connectionpools
and successfully
run the scripts to populate the tables. I am confident the Oracle OCIdriver
is configured
properly (have done this many times). However, after I make all of thenecessary
changes and launch the server, I receive the following error:
Starting WebLogic Server ....
<Jun 26, 2002 4:47:32 AM PDT> <Notice> <Management> <Loading
configuration
file .\config\wlcsDomain\config.xml
...> <Jun 26, 2002 4:47:39 AM PDT> <Emergency> <Server> <Unable toinitialize
the
server: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
atweblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
atweblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
atweblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
atweblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
The startup appears to have trouble with the RDBMS security realm. Itried
a) leaving
the settings "as-is", configured for Cloudscape, or b) modified to point
to my instance
of Oracle (are their additional things I need to load in Oracle tosupport
it using
the RDBMS realm). Is there a way I can disable the security realm toat
least get
the server up-and-running (via the web.xml). I've installed andreinstalled
many
times, trying various combinations of things.
Any help would be hugely appreciated!
Thanks,
jeff

I am getting RPD0018 Error from IDS for few portal requests

Hi,
We are getting RPD0018 error from IDS for few portal requests. I thought this error was generating when the IDS max wait time sets 30 seconds for gendata to respond back. I have changed this IDS Wait time to 180 Seconds, but still i am getting the same error. I was not able to figure out the cause. Can some one help me out?
Thanks

Hi,
This error is likely being thrown by GenData due to some failure in the generation, not by the max wait time. According to the documentation:
"Category: Error: Bridge Configuration
Gendata failure in //ROWSET[@NAME="RPD0018"]//VAR[@NAME="LOCATION"].
Cause: Gendata failed.
Remedy: Fix Gendata errors and try again.
You should look at the transactions that are failing and debug the forms/sections being generated.
-DA

How to use ISE Guest Portal for AD users

Hi there,
As subject explains all, I want to use ISE Guest Portal for my domain users. I have tried many different ways to authenticate users and finally I came to the conclusion that ISE CWA works pretty well and is very stable. WLC Webauth sucks alot, does not redirect to the login page always.
Can you please share what other ways are stable ways to authenticate AD users? I know about WPA 802.1x authentication but that requires a CA in the network which is not available at the moment. So can you please Suggect?
Otherwise, I want to use ISE Guest Portal for my AD users as well. AD is already integrated to ISE, the issue happens when I attempt to athenticate using AD user account, the user gets authenticated but the Guest Portal redirects me to Device Provissioning page and there it shows an error saying "there is not policy to register the device, contact system admin"
Am I missing something??
I am running WLC 5760 with ISE 1.2
Thanks in advance..

Hi,
Can you post a screenshot of your current policies? Also for 802.1x authentication although it is best practices you do not have to have an internal CA to make this solution work. You can disable the option to "validate server certificate" or you can use a trusted CA to sign the certificate for the eap interface.
In most cases 802.1x is the method to go because it provides dynamic authentication without forcing users to redirected to a web page multiple times throughout the day, scenarios such as computers that sleep or users that are mobile will not have connectivity until they redirect to the portal if one of the scenarios exist. You also gain WPA encryption on your WLAN, if you are using strictly layer 3 web auth you run into issues where encryption is not used and rely on encryption from the application as your method of data integrity and security.
Thanks,
Tarik Admani
*Please rate helpful posts*

Assertion Failed - Dump when clicking on the links from Portal for WD Comp

Hi,
We have a WD Component which is integrated to the Portal . When we click on the link in the Portal for the first 2 times, the selection screen is shown correctly ( when debugged, the program stops in WDDOINIT method before the sel.screen is shown).
When we click on the link for the third or fourth time with no time gap, it shows a dump. This is the dump I am getting.
Runtime Errors         ASSERTION_FAILED
Date and Time          01/06/2011 10:13:58
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ASSERTION_FAILED" " "
"CL_NW7_VIEW_ELEMENT_ADAPTER===CP" or "CL_NW7_VIEW_ELEMENT_ADAPTER===CM004"
"DISPATCH_NW7_EVENT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
User and Transaction
Client.............. 010
User................ "STECURRY"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "4D250E9ADDFB00BDE10080000A041004"
Program............. "CL_NW7_VIEW_ELEMENT_ADAPTER===CP"
Screen.............. "SAPMHTTP 0010"
Screen Line......... 2
Information on Caller ofr "HTTPS" Connection:
Plug-in Type.......... "HTTPS"
Caller IP............. "10.6.4.220"
Caller Port........... 443
Universal Resource Id. "/sap/bc/webdynpro/sap/ZEM_INV_APP_ASSIGNMENTS/"
Information on where terminated
Termination occurred in the ABAP program "CL_NW7_VIEW_ELEMENT_ADAPTER===CP" -
in "DISPATCH_NW7_EVENT".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 5
of the (Include) program "CL_NW7_VIEW_ELEMENT_ADAPTER===CM004".
Source Code Extract
Line
SourceCde
1
METHOD dispatch_nw7_event.
2
DATA: l_event_handler TYPE REF TO if_wdr_nw7_event_handler.
3
4
l_event_handler = get_nw7_event_handler( i_event_handler_id ).
>>>>>
assert l_event_handler is not initial.
6
7
" View-based Delta Rendering: tracking of client events
8
raise event on_nw7_handle_event
9
exporting
10
event_handler = l_event_handler
11
event_name    = i_event_name.
12
13
14
l_event_handler->handle_event(
15
i_event_name       = i_event_name
16
i_event_parameters = i_event_parameters
17
i_update_data      = i_update_data
18
i_event_queue      = i_event_queue ).
19
ENDMETHOD.
- I have cut the dump to make it short and clear.
One of my colleague ran a HTTP watch trace and I am attaching it as well.
<body> <table cellpadding="0" cellspacing="0" border="0" width="100%"> <tr> <td> <h1> Error when processing your request </h1> <br> <h2> What has happened? </h2> <p> The URL https://uswasspq.deloitte.com:/sap/bc/webdynpro/sap/ZEM_INV_APPROVER_MAIN//ucfLOADING was not called due to an error. </p> </td> </tr> <tr> <td> </td> </tr> <tr> <td class="emphasize"> <strong> Note </strong> <br> <ul> <li> The following error text was processed in the system SPQ : <b> User session (HTTP/SMTP/..) closed after timeout </b> </li> </ul> <ul> <li> The error occurred on the application server usuxc204_SPQ_01 and in the work process 1 . </li> </ul> <ul> <li> The termination type was: ERROR_MESSAGE_STATE </li> </ul> <ul> <li> The ABAP call stack was: <br> Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP<BR>Method: IF_HTTP_EXTENSIONHANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP<BR>Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP<BR>Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME<BR>Module: %_HTTP_START of program SAPMHTTP<BR> </li> </ul> </td> </tr> <tr> <td> </td> </tr> <tr> <td> <p> </p> <h2> What can I do? </h2> <ul> <li> If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SPQ in transaction ST22. </li> </ul> <ul> <li> If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server usuxc204_SPQ_01 in transaction SM21. </li> </ul> <ul> <li> If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server usuxc204_SPQ_01 . In some situations, you may also need to analyze the trace files of other work processes. </li> </ul> <ul> <li> If you do not yet have a user ID, contact your system administrator. </li> </ul> <br/> <p class="note"> Error code: ICF-IE-https -c: 010 -u: STHUGHES -l: E -s: SPQ -i: usuxc204_SPQ_01 -w: 1 -d: 20110208 -t: 131808 -v: ERROR_MESSAGE_STATE -e: User session (HTTP/SMTP/..) closed after timeout </p> <br/> <p> HTTP 500 - Internal Server Error <br/> <p> Your SAP Internet Communication Framework Team </p> </td> </tr> </table> </body> </html>
After this error a URL is called form the WebDynpro to the following html page.
https://uswasspq.deloitte.com/sap/bc/webdynpro/sap/zem_inv_approver_main/dps_Error_Page.html ( this is the friendly message we have put so that the user does not see the dump on his screen.
I tried invalidating the nodes in the WDDOEXIT at the view level but it did not help. This is a show stopper for the project to go live.
Thanks,
Guru.

Hi Guru,
It is not readable the way you posted and that might be the reason that you do not get reactions.
Can you please confirm the following.
1. Is this problem occurs with out portal when you run the application standalone in SAP GUI.
2. What is going on wddoinit method or wddomodify method, any resource handling there ?

Error during Portal Setup: An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount

Error:
Configure Portal Setup
An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
Errors in the Log:
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
Any ideas?
David Baur

I finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
David Baur

Error in portal for SRm trnasactions

Similar Messages

Maybe you are looking for